We can't free up the chain using recursion or we run into a stack overflow.
Manually free up the dangling chain nodes to avoid recursion.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 7bf60c52e0 ("dma-buf: add new dma_fence_chain container v7")
Link: https://patchwork.freedesktop.org/patch/321612/
Complete the abstraction of the ww_mutex inside the reservation object.
This allows us to add more handling and debugging to the reservation
object in the future.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/320761/
DRM_WAIT_ON() is from the deprecated drm_os_linux header and
the modern replacement is the wait_event_*.
The return values differ, so a conversion is needed to
keep the original interface towards userspace.
Introduced a switch/case to make code obvious.
Analysis from Michel Dänzer:
The waiting condition rely on all relevant places where vblank_count
is modified calls wake_up(&vblank->queue).
drm_handle_vblank():
- Calls wake_up(&vblank->queue)
drm_vblank_enable():
- There is no need here because there can be no sleeping waiters
in the queue, because vblank->enabled == false immediately
terminates any waits.
drm_crtc_accurate_vblank_count():
- This is called from interrupt handlers, at least from
amdgpu_dm.c:dm_pflip_high_irq(). Not sure it needs to wake up
the queue though, the driver should call
drm_(crtc_)_handle_vblank anyway.
drm_vblank_disable_and_save():
- It can be called from an interrupt, via drm_handle_vblank ->
vblank_disable_fn. However, the only place where
drm_vblank_disable_and_save can be called with sleeping waiters
in the queue is in drm_crtc_vblank_off, which wakes up the queue
afterwards (which terminates all waits, because
vblank->enabled == false at this point).
v3:
- Added analysis to changelog from Michel Dänzer
- Moved return result handling inside if (req_seq != seq) (Daniel V)
- Reused more of the former logic - resulting in simpler code
- Dropped Reviewed-by from Sean Paul as this is a new implementation
v2:
- Fix so the case where req_seq equals seq was handled properly
- quick hack to check if IGT became happy
- Only sent to igt, not to dri-devel
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726210658.GA6299@ravnborg.org
This drops the check of the surplus "pads" configuration
from the device tree that is completely unused in the DRM
driver.
This was only used to work around limitations in the earlier
fbdev driver.
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724134959.2365-2-linus.walleij@linaro.org
The pads were an earlier workaround for the internal image
pipeline in the Linux fbdev subsystem. As we move to generic
definition of display properties and drivers that no longer
need this to work, deprecate this property.
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724134959.2365-1-linus.walleij@linaro.org
Komeda HW can support dual-link which splits display frame to two halves
(left/link0, right/link1) and output them by two output links.
Due to the halved pixel rate of each link, the pxlclk of dual-link can be
reduced two times compare with single-link.
For enabling dual-link:
- The DT need to configure two output-links for the pipeline node.
- Komeda enable dual-link when both link0 and link1 have been connected.
Example of how the pipeline node will look like for dual-link setup
pipe0: pipeline@0 {
clocks = <&fpgaosc2>;
clock-names = "pxclk";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
dp0_pipe0_link0: endpoint@0 {
reg = <0>;
remote-endpoint = <&dlink_connector_in0>;
};
dp0_pipe0_link1: endpoint@1 {
reg = <1>;
remote-endpoint = <&dlink_connector_in1>;
};
};
};
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081013.13638-3-james.qian.wang@arm.com
struct drm_display_mode contains two copies of timings.
- plain timings.
- hardware timings, the ones with "crtc_" prefix.
According to the definition, update komeda to use the hardware timing.
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081013.13638-2-james.qian.wang@arm.com
drm_debugfs_crtc_crc_add() function checks that both .set_crc_source and
.verify_crc_source hooks are provided before enabling debugfs support for
reading per-frame CRC data. Make that explicit in the documentation.
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703150330.21992-1-Liviu.Dudau@arm.com
Now that -Wimplicit-fallthrough is passed to GCC by default, the
following warnings shows up:
../drivers/gpu/drm/arm/malidp_hw.c: In function ‘malidp_format_get_bpp’:
../drivers/gpu/drm/arm/malidp_hw.c:387:8: warning: this statement may fall
through [-Wimplicit-fallthrough=]
bpp = 30;
~~~~^~~~
../drivers/gpu/drm/arm/malidp_hw.c:388:3: note: here
case DRM_FORMAT_YUV420_10BIT:
^~~~
../drivers/gpu/drm/arm/malidp_hw.c: In function ‘malidp_se_irq’:
../drivers/gpu/drm/arm/malidp_hw.c:1311:4: warning: this statement may fall
through [-Wimplicit-fallthrough=]
drm_writeback_signal_completion(&malidp->mw_connector, 0);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/arm/malidp_hw.c:1313:3: note: here
case MW_START:
^~~~
Rework to add a 'break;' in a case that didn't have it so that
the compiler doesn't warn about fall-through.
Cc: stable@vger.kernel.org # v5.2+
Fixes: b8207562ab ("drm/arm/malidp: Specified the rotation memory requirements for AFBC YUV formats")
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730153056.3606-1-anders.roxell@linaro.org
Earlier there were no mode_valid() helper for crtc and tilcdc had a
hack to over come this limitation. But now the mode_valid() helper is
there (has been since v4.13), so it is about time to get rid of that
hack.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <5c4dcb5b1e7975bd2b7ca86f7addf219cd0f9a06.1564750248.git.jsarha@ti.com
This reverts commit bed7a2182d.
It causes the following build error:
../drm/radeon/radeon_connectors.c: In function 'radeon_add_legacy_connector':
../drm/radeon/radeon_connectors.c:2433:5: error: 'ddc' undeclared (first use in this function)
ddc = &radeon_connector->ddc_bus->adapter;
^~~
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801115313.22562-1-narmstrong@baylibre.com
Allow passing ddc adapter pointer to the init function. Even if
drm_connector_init() sometime in the future decides to e.g. memset() all
connector fields to zeros, the newly added function ensures that at its
completion the ddc member of connector is correctly set.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3915224ae895240fd0973cf7f06b9d453e4d8520.1564161140.git.andrzej.p@collabora.com
Add generic code which creates symbolic links in sysfs, pointing to ddc
interface used by a particular video output. For example:
ls -l /sys/class/drm/card0-HDMI-A-1/ddc
lrwxrwxrwx 1 root root 0 Jun 24 10:42 /sys/class/drm/card0-HDMI-A-1/ddc \
-> ../../../../soc/13880000.i2c/i2c-2
This makes it easy for user to associate a display with its ddc adapter
and use e.g. ddcutil to control the chosen monitor.
This patch adds an i2c_adapter pointer to struct drm_connector. Particular
drivers can then use it instead of using their own private instance. If a
connector contains a ddc, then create a symbolic link in sysfs.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d470def6cd661b777faeee67b5838a4623c4010e.1564161140.git.andrzej.p@collabora.com
Move the driver to the new haven for tiny DRM drivers.
Cc: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725105132.22545-4-noralf@tronnes.org
The drm in tinydrm is superfluous so rename to tiny.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725105132.22545-3-noralf@tronnes.org
This makes the tiny drivers visible by default without having to enable a
knob.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com> to it once
Link: https://patchwork.freedesktop.org/patch/msgid/20190725105132.22545-2-noralf@tronnes.org
Everyone is just using gem_object->resv now.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-5-daniel.vetter@ffwll.ch
That way we can ditch our gem_prime_res_obj implementation. Since ttm
absolutely needs the right reservation object all the boilerplate is
already there and we just have to wire it up correctly.
Note that gem/prime doesn't care when we do this, as long as we do it
before the bo is registered and someone can call the handle2fd ioctl
on it.
Aside: ttm_buffer_object.ttm_resv could probably be ditched in favour
of always passing a non-NULL resv to ttm_bo_init(). At least for gem
drivers that would avoid having two of these, on in ttm_buffer_object
and the other in drm_gem_object, one just there for confusion.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Michel Dänzer" <michel.daenzer@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Evan Quan <evan.quan@amd.com>
Cc: Sonny Jiang <sonny.jiang@amd.com>
Cc: Amber Lin <Amber.Lin@amd.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Thomas Zimmermann <contact@tzimmermann.org>
Cc: Samuel Li <Samuel.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-4-daniel.vetter@ffwll.ch
That way we can ditch our gem_prime_res_obj implementation. Since ttm
absolutely needs the right reservation object all the boilerplate is
already there and we just have to wire it up correctly.
Note that gem/prime doesn't care when we do this, as long as we do it
before the bo is registered and someone can call the handle2fd ioctl
on it.
Aside: ttm_buffer_object.ttm_resv could probably be ditched in favour
of always passing a non-NULL resv to ttm_bo_init(). At least for gem
drivers that would avoid having two of these, on in ttm_buffer_object
and the other in drm_gem_object, one just there for confusion.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-3-daniel.vetter@ffwll.ch
That way we can ditch our gem_prime_res_obj implementation. Since ttm
absolutely needs the right reservation object all the boilerplate is
already there and we just have to wire it up correctly.
Note that gem/prime doesn't care when we do this, as long as we do it
before the bo is registered and someone can call the handle2fd ioctl
on it.
Aside: ttm_buffer_object.ttm_resv could probably be ditched in favour
of always passing a non-NULL resv to ttm_bo_init(). At least for gem
drivers that would avoid having two of these, on in ttm_buffer_object
and the other in drm_gem_object, one just there for confusion.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725132655.11951-2-daniel.vetter@ffwll.ch
Fix sparse warning:
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:1151:5: warning:
symbol 'analogix_dp_atomic_check' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730150057.57388-1-yuehaibing@huawei.com
We need to check the context number instead if the previous sequence to detect
an error and if an error is detected we need to drop the reference to the
current fence or otherwise would leak it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 27b575a9aa ("drm/syncobj: add timeline payload query ioctl v6")
Link: https://patchwork.freedesktop.org/patch/319123/
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: arm):
drivers/gpu/drm/sti/sti_hdmi.c: In function ‘hdmi_audio_configure’:
drivers/gpu/drm/sti/sti_hdmi.c:851:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
audio_cfg |= HDMI_AUD_CFG_CH78_VALID;
drivers/gpu/drm/sti/sti_hdmi.c:852:2: note: here
case 6:
^~~~
drivers/gpu/drm/sti/sti_hdmi.c:853:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
audio_cfg |= HDMI_AUD_CFG_CH56_VALID;
drivers/gpu/drm/sti/sti_hdmi.c:854:2: note: here
case 4:
^~~~
drivers/gpu/drm/sti/sti_hdmi.c:855:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
audio_cfg |= HDMI_AUD_CFG_CH34_VALID | HDMI_AUD_CFG_8CH;
drivers/gpu/drm/sti/sti_hdmi.c:856:2: note: here
case 2:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729222752.GA20277@embeddedor
Fixes the following warnings:
../drivers/gpu/drm/drm_dp_mst_topology.c:1593: warning: Excess function parameter 'drm_connector' description in 'drm_dp_mst_connector_late_register'
../drivers/gpu/drm/drm_dp_mst_topology.c:1613: warning: Excess function parameter 'drm_connector' description in 'drm_dp_mst_connector_early_unregister'
../drivers/gpu/drm/drm_dp_mst_topology.c:1594: warning: Function parameter or member 'connector' not described in 'drm_dp_mst_connector_late_register'
../drivers/gpu/drm/drm_dp_mst_topology.c:1614: warning: Function parameter or member 'connector' not described in 'drm_dp_mst_connector_early_unregister'
Fixes: 562836a269 ("drm/dp_mst: Enable registration of AUX devices for MST ports")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726142057.224121-1-sean@poorly.run
If the panel is wrapped in a panel_bridge it gets prepar()ed before the
upstream DSI bridge which can cause hangs (e.g. with imx-nwl since clocks
are not enabled yet). To avoid this move the panel's first DSI access to
enable() so the upstream bridge can prepare the DSI host controller in
it's pre_enable().
This is also in line with other panel drivers.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/12c3495b234952aafe11980a9e06cfd246134660.1564146727.git.agx@sigxcpu.org
In the patch ("video: of: display_timing: Don't yell if no timing node
is present") we'll stop spouting an error directly in
of_get_display_timing() if no node is present. Presumably amba-clcd
should take charge of spouting its own error now.
NOTE: we'll print two errors if the node was present but there were
problems parsing the timing node (one in of_parse_display_timing() and
this new one). Since this is a fatal error for the driver's probe
(and presumably someone will be debugging), this should be OK.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722182439.44844-5-dianders@chromium.org
In the patch ("video: of: display_timing: Don't yell if no timing node
is present") we'll stop spouting an error directly in
of_get_display_timing() if no node is present. Presumably panel-lvds
should take charge of spouting its own error now.
NOTE: we'll print two errors if the node was present but there were
problems parsing the timing node (one in of_parse_display_timing() and
this new one). Since this is a fatal error for the driver's probe
(and presumably someone will be debugging), this should be OK.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722182439.44844-4-dianders@chromium.org