An RPC can terminate before its reply arrives, if a credential
problem or a soft timeout occurs. After this happens, xprtrdma
reports it is out of Receive buffers.
A Receive buffer is posted before each RPC is sent, and returned to
the buffer pool when a reply is received. If no reply is received
for an RPC, that Receive buffer remains posted. But xprtrdma tries
to post another when the next RPC is sent.
If this happens a few dozen times, there are no receive buffers left
to be posted at send time. I don't see a way for a transport
connection to recover at that point, and it will spit warnings and
unnecessarily delay RPCs on occasion for its remaining lifetime.
Commit 1e465fd4ff ("xprtrdma: Replace send and receive arrays")
removed a little bit of logic to detect this case and not provide
a Receive buffer so no more buffers are posted, and then transport
operation continues correctly. We didn't understand what that logic
did, and it wasn't commented, so it was removed as part of the
overhaul to support backchannel requests.
Restore it, but be wary of the need to keep extra Receives posted
to deal with backchannel requests.
Fixes: 1e465fd4ff ("xprtrdma: Replace send and receive arrays")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Receive buffer exhaustion, if it were to actually occur, would be
catastrophic. However, when there are no reply buffers to post, that
means all of them have already been posted and are waiting for
incoming replies. By design, there can never be more RPCs in flight
than there are available receive buffers.
A receive buffer can be left posted after an RPC exits without a
received reply; say, due to a credential problem or a soft timeout.
This does not result in fewer posted receive buffers than there are
pending RPCs, and there is already logic in xprtrdma to deal
appropriately with this case.
It also looks like the "+ 2" that was removed was accidentally
accommodating the number of extra receive buffers needed for
receiving backchannel requests. That will need to be addressed by
another patch.
Fixes: 3d4cf35bd4 ("xprtrdma: Reply buffer exhaustion can be...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The commit f9b2ee714c ("SUNRPC: Move UDP receive data path
into a workqueue context"), as a side effect, moved the
skb_free_datagram() call outside the scope of the related socket
lock, but UDP sockets require such lock to be held for proper
memory accounting.
Fix it by replacing skb_free_datagram() with
skb_free_datagram_locked().
Fixes: f9b2ee714c ("SUNRPC: Move UDP receive data path into a workqueue context")
Reported-and-tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Using NFSv4.1 on RDMA should be safe, so broaden the new checks in
rpc_create().
WARN_ON_ONCE is used, matching most other WARN call sites in clnt.c.
Fixes: 39a9beab5a ("rpc: share one xps between all backchannels")
Fixes: d50039ea5e ("nfsd4/rpc: move backchannel create logic...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Highlights include:
- Stable patch from Olga to fix RPCSEC_GSS upcalls when the same user needs
multiple different security services (e.g. krb5i and krb5p).
- Stable patch to fix a regression introduced by the use of SO_REUSEPORT,
and that prevented the use of multiple different NFS versions to the
same server.
- TCP socket reconnection timer fixes.
- Patch from Neil to disable the use of IPv6 temporary addresses.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UHph
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- Stable patch from Olga to fix RPCSEC_GSS upcalls when the same user
needs multiple different security services (e.g. krb5i and krb5p).
- Stable patch to fix a regression introduced by the use of
SO_REUSEPORT, and that prevented the use of multiple different NFS
versions to the same server.
- TCP socket reconnection timer fixes.
- Patch from Neil to disable the use of IPv6 temporary addresses"
* tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Cap the transport reconnection timer at 1/2 lease period
NFSv4: Cleanup the setting of the nfs4 lease period
SUNRPC: Limit the reconnect backoff timer to the max RPC message timeout
SUNRPC: Fix reconnection timeouts
NFSv4.2: LAYOUTSTATS may return NFS4ERR_ADMIN/DELEG_REVOKED
SUNRPC: disable the use of IPv6 temporary addresses.
SUNRPC: allow for upcalls for same uid but different gss service
SUNRPC: Fix up socket autodisconnect
SUNRPC: Handle EADDRNOTAVAIL on connection failures
We don't want to miss a lease period renewal due to the TCP connection
failing to reconnect in a timely fashion. To ensure this doesn't happen,
cap the reconnection timer so that we retry the connection attempt
at least every 1/2 lease period.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When the connect attempt fails and backs off, we should start the clock
at the last connection attempt, not time at which we queue up the
reconnect job.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the net.ipv6.conf.*.use_temp_addr sysctl is set to '2',
then TCP connections over IPv6 will prefer a 'private' source
address.
These eventually expire and become invalid, typically after a week,
but the time is configurable.
When the local address becomes invalid the client will not be able to
receive replies from the server. Eventually the connection will timeout
or break and a new connection will be established, but this can take
half an hour (typically TCP connection break time).
RFC 4941, which describes private IPv6 addresses, acknowledges that some
applications might not work well with them and that the application may
explicitly a request non-temporary (i.e. "public") address.
I believe this is correct for SUNRPC clients. Without this change, a
client will occasionally experience a long delay if private addresses
have been enabled.
The privacy offered by private addresses is of little value for an NFS
server which requires client authentication.
For NFSv3 this will often not be a problem because idle connections are
closed after 5 minutes. For NFSv4 connections never go idle due to the
period RENEW (or equivalent) request.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It's possible to have simultaneous upcalls for the same UIDs but
different GSS service. In that case, we need to allow for the
upcall to gssd to proceed so that not the same context is used
by two different GSS services. Some servers lock the use of context
to the GSS service.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Trond made a change to the server's tcp logic that allows a fast
client to better take advantage of high bandwidth networks, but
may increase the risk that a single client could starve other
clients; a new sunrpc.svc_rpc_per_connection_limit parameter
should help mitigate this in the (hopefully unlikely) event this
becomes a problem in practice.
Tom Haynes added a minimal flex-layout pnfs server, which is of
no use in production for now--don't build it unless you're doing
client testing or further server development.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mo54
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Highlights:
- Trond made a change to the server's tcp logic that allows a fast
client to better take advantage of high bandwidth networks, but may
increase the risk that a single client could starve other clients;
a new sunrpc.svc_rpc_per_connection_limit parameter should help
mitigate this in the (hopefully unlikely) event this becomes a
problem in practice.
- Tom Haynes added a minimal flex-layout pnfs server, which is of no
use in production for now--don't build it unless you're doing
client testing or further server development"
* tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linux: (32 commits)
nfsd: remove some dead code in nfsd_create_locked()
nfsd: drop unnecessary MAY_EXEC check from create
nfsd: clean up bad-type check in nfsd_create_locked
nfsd: remove unnecessary positive-dentry check
nfsd: reorganize nfsd_create
nfsd: check d_can_lookup in fh_verify of directories
nfsd: remove redundant zero-length check from create
nfsd: Make creates return EEXIST instead of EACCES
SUNRPC: Detect immediate closure of accepted sockets
SUNRPC: accept() may return sockets that are still in SYN_RECV
nfsd: allow nfsd to advertise multiple layout types
nfsd: Close race between nfsd4_release_lockowner and nfsd4_lock
nfsd/blocklayout: Make sure calculate signature/designator length aligned
xfs: abstract block export operations from nfsd layouts
SUNRPC: Remove unused callback xpo_adjust_wspace()
SUNRPC: Change TCP socket space reservation
SUNRPC: Add a server side per-connection limit
SUNRPC: Micro optimisation for svc_data_ready
SUNRPC: Call the default socket callbacks instead of open coding
SUNRPC: lock the socket while detaching it
...
Ensure that we don't forget to set up the disconnection timer for the
case when a connect request is fulfilled after the RPC request that
initiated it has timed out or been interrupted.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This modification is useful for debugging issues that happen while
the socket is being initialised.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're seeing traces of the following form:
[10952.396347] svc: transport ffff88042ba4a 000 dequeued, inuse=2
[10952.396351] svc: tcp_accept ffff88042ba4 a000 sock ffff88042a6e4c80
[10952.396362] nfsd: connect from 10.2.6.1, port=187
[10952.396364] svc: svc_setup_socket ffff8800b99bcf00
[10952.396368] setting up TCP socket for reading
[10952.396370] svc: svc_setup_socket created ffff8803eb10a000 (inet ffff88042b75b800)
[10952.396373] svc: transport ffff8803eb10a000 put into queue
[10952.396375] svc: transport ffff88042ba4a000 put into queue
[10952.396377] svc: server ffff8800bb0ec000 waiting for data (to = 3600000)
[10952.396380] svc: transport ffff8803eb10a000 dequeued, inuse=2
[10952.396381] svc_recv: found XPT_CLOSE
[10952.396397] svc: svc_delete_xprt(ffff8803eb10a000)
[10952.396398] svc: svc_tcp_sock_detach(ffff8803eb10a000)
[10952.396399] svc: svc_sock_detach(ffff8803eb10a000)
[10952.396412] svc: svc_sock_free(ffff8803eb10a000)
i.e. an immediate close of the socket after initialisation.
The culprit appears to be the test at the end of svc_tcp_init, which
checks if the newly created socket is in the TCP_ESTABLISHED state,
and immediately closes it if not. The evidence appears to suggest that
the socket might still be in the SYN_RECV state at this time.
The fix is to check for both states, and then to add a check in
svc_tcp_state_change() to ensure we don't close the socket when
it transitions into TCP_ESTABLISHED.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the connect attempt immediately fails with an EADDRNOTAVAIL error, then
that means our choice of source port number was bad.
This error is expected when we set the SO_REUSEPORT socket option and we
have 2 sockets sharing the same source and destination address and port
combinations.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes: 402e23b4ed ("SUNRPC: Fix stupid typo in xs_sock_set_reuseport")
Cc: stable@vger.kernel.org # v4.0+
Highlights include:
Stable bugfixes:
- nfs: don't create zero-length requests
- Several LAYOUTGET bugfixes
Features:
- Several performance related features
- More aggressive caching when we can rely on close-to-open cache
consistency
- Remove serialisation of O_DIRECT reads and writes
- Optimise several code paths to not flush to disk unnecessarily. However
allow for the idiosyncracies of pNFS for those layout types that need
to issue a LAYOUTCOMMIT before the metadata can be updated on the server.
- SUNRPC updates to the client data receive path
- pNFS/SCSI support RH/Fedora dm-mpath device nodes
- pNFS files/flexfiles can now use unprivileged ports when the generic NFS
mount options allow it.
Bugfixes:
- Don't use RDMA direct data placement together with data integrity or
privacy security flavours
- Remove the RDMA ALLPHYSICAL memory registration mode as it has potential
security holes.
- Several layout recall fixes to improve NFSv4.1 protocol compliance.
- Fix an Oops in the pNFS files and flexfiles connection setup to the DS
- Allow retry of operations that used a returned delegation stateid
- Don't mark the inode as revalidated if a LAYOUTCOMMIT is outstanding
- Fix writeback races in nfs4_copy_range() and nfs42_proc_deallocate()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WNyE
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- nfs: don't create zero-length requests
- several LAYOUTGET bugfixes
Features:
- several performance related features
- more aggressive caching when we can rely on close-to-open
cache consistency
- remove serialisation of O_DIRECT reads and writes
- optimise several code paths to not flush to disk unnecessarily.
However allow for the idiosyncracies of pNFS for those layout
types that need to issue a LAYOUTCOMMIT before the metadata can
be updated on the server.
- SUNRPC updates to the client data receive path
- pNFS/SCSI support RH/Fedora dm-mpath device nodes
- pNFS files/flexfiles can now use unprivileged ports when
the generic NFS mount options allow it.
Bugfixes:
- Don't use RDMA direct data placement together with data
integrity or privacy security flavours
- Remove the RDMA ALLPHYSICAL memory registration mode as
it has potential security holes.
- Several layout recall fixes to improve NFSv4.1 protocol
compliance.
- Fix an Oops in the pNFS files and flexfiles connection
setup to the DS
- Allow retry of operations that used a returned delegation
stateid
- Don't mark the inode as revalidated if a LAYOUTCOMMIT is
outstanding
- Fix writeback races in nfs4_copy_range() and
nfs42_proc_deallocate()"
* tag 'nfs-for-4.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (104 commits)
pNFS: Actively set attributes as invalid if LAYOUTCOMMIT is outstanding
NFSv4: Clean up lookup of SECINFO_NO_NAME
NFSv4.2: Fix warning "variable ‘stateids’ set but not used"
NFSv4: Fix warning "no previous prototype for ‘nfs4_listxattr’"
SUNRPC: Fix a compiler warning in fs/nfs/clnt.c
pNFS: Remove redundant smp_mb() from pnfs_init_lseg()
pNFS: Cleanup - do layout segment initialisation in one place
pNFS: Remove redundant stateid invalidation
pNFS: Remove redundant pnfs_mark_layout_returned_if_empty()
pNFS: Clear the layout metadata if the server changed the layout stateid
pNFS: Cleanup - don't open code pnfs_mark_layout_stateid_invalid()
NFS: pnfs_mark_matching_lsegs_return() should match the layout sequence id
pNFS: Do not set plh_return_seq for non-callback related layoutreturns
pNFS: Ensure layoutreturn acts as a completion for layout callbacks
pNFS: Fix CB_LAYOUTRECALL stateid verification
pNFS: Always update the layout barrier seqid on LAYOUTGET
pNFS: Always update the layout stateid if NFS_LAYOUT_INVALID_STID is set
pNFS: Clear the layout return tracking on layout reinitialisation
pNFS: LAYOUTRETURN should only update the stateid if the layout is valid
nfs: don't create zero-length requests
...
Pull userns vfs updates from Eric Biederman:
"This tree contains some very long awaited work on generalizing the
user namespace support for mounting filesystems to include filesystems
with a backing store. The real world target is fuse but the goal is
to update the vfs to allow any filesystem to be supported. This
patchset is based on a lot of code review and testing to approach that
goal.
While looking at what is needed to support the fuse filesystem it
became clear that there were things like xattrs for security modules
that needed special treatment. That the resolution of those concerns
would not be fuse specific. That sorting out these general issues
made most sense at the generic level, where the right people could be
drawn into the conversation, and the issues could be solved for
everyone.
At a high level what this patchset does a couple of simple things:
- Add a user namespace owner (s_user_ns) to struct super_block.
- Teach the vfs to handle filesystem uids and gids not mapping into
to kuids and kgids and being reported as INVALID_UID and
INVALID_GID in vfs data structures.
By assigning a user namespace owner filesystems that are mounted with
only user namespace privilege can be detected. This allows security
modules and the like to know which mounts may not be trusted. This
also allows the set of uids and gids that are communicated to the
filesystem to be capped at the set of kuids and kgids that are in the
owning user namespace of the filesystem.
One of the crazier corner casees this handles is the case of inodes
whose i_uid or i_gid are not mapped into the vfs. Most of the code
simply doesn't care but it is easy to confuse the inode writeback path
so no operation that could cause an inode write-back is permitted for
such inodes (aka only reads are allowed).
This set of changes starts out by cleaning up the code paths involved
in user namespace permirted mounts. Then when things are clean enough
adds code that cleanly sets s_user_ns. Then additional restrictions
are added that are possible now that the filesystem superblock
contains owner information.
These changes should not affect anyone in practice, but there are some
parts of these restrictions that are changes in behavior.
- Andy's restriction on suid executables that does not honor the
suid bit when the path is from another mount namespace (think
/proc/[pid]/fd/) or when the filesystem was mounted by a less
privileged user.
- The replacement of the user namespace implicit setting of MNT_NODEV
with implicitly setting SB_I_NODEV on the filesystem superblock
instead.
Using SB_I_NODEV is a stronger form that happens to make this state
user invisible. The user visibility can be managed but it caused
problems when it was introduced from applications reasonably
expecting mount flags to be what they were set to.
There is a little bit of work remaining before it is safe to support
mounting filesystems with backing store in user namespaces, beyond
what is in this set of changes.
- Verifying the mounter has permission to read/write the block device
during mount.
- Teaching the integrity modules IMA and EVM to handle filesystems
mounted with only user namespace root and to reduce trust in their
security xattrs accordingly.
- Capturing the mounters credentials and using that for permission
checks in d_automount and the like. (Given that overlayfs already
does this, and we need the work in d_automount it make sense to
generalize this case).
Furthermore there are a few changes that are on the wishlist:
- Get all filesystems supporting posix acls using the generic posix
acls so that posix_acl_fix_xattr_from_user and
posix_acl_fix_xattr_to_user may be removed. [Maintainability]
- Reducing the permission checks in places such as remount to allow
the superblock owner to perform them.
- Allowing the superblock owner to chown files with unmapped uids and
gids to something that is mapped so the files may be treated
normally.
I am not considering even obvious relaxations of permission checks
until it is clear there are no more corner cases that need to be
locked down and handled generically.
Many thanks to Seth Forshee who kept this code alive, and putting up
with me rewriting substantial portions of what he did to handle more
corner cases, and for his diligent testing and reviewing of my
changes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (30 commits)
fs: Call d_automount with the filesystems creds
fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns
evm: Translate user/group ids relative to s_user_ns when computing HMAC
dquot: For now explicitly don't support filesystems outside of init_user_ns
quota: Handle quota data stored in s_user_ns in quota_setxquota
quota: Ensure qids map to the filesystem
vfs: Don't create inodes with a uid or gid unknown to the vfs
vfs: Don't modify inodes with a uid or gid unknown to the vfs
cred: Reject inodes with invalid ids in set_create_file_as()
fs: Check for invalid i_uid in may_follow_link()
vfs: Verify acls are valid within superblock's s_user_ns.
userns: Handle -1 in k[ug]id_has_mapping when !CONFIG_USER_NS
fs: Refuse uid/gid changes which don't map into s_user_ns
selinux: Add support for unprivileged mounts from user namespaces
Smack: Handle labels consistently in untrusted mounts
Smack: Add support for unprivileged mounts from user namespaces
fs: Treat foreign mounts as nosuid
fs: Limit file caps to the user namespace of the super block
userns: Remove the now unnecessary FS_USERNS_DEV_MOUNT flag
userns: Remove implicit MNT_NODEV fragility.
...
Fix the report:
net/sunrpc/clnt.c:2580:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The current min/max resvport settings are independently limited
by the entire range of allowed ports, so max_resvport can be
set to a port lower than min_resvport.
Prevent inversion of min/max values when set through sysfs and
module parameter by setting the limits dependent on each other.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The current min/max resvport settings are independently limited
by the entire range of allowed ports, so max_resvport can be
set to a port lower than min_resvport.
Prevent inversion of min/max values when set through sysctl by
setting the limits dependent on each other.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The range calculation for choosing the random reserved port will panic
with divide-by-zero when min_resvport == max_resvport, a range of one
port, not zero.
Fix the reserved port range calculation by adding one to the difference.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Author: Frank Sorenson <sorenson@redhat.com>
Date: 2016-06-27 13:55:48 -0500
sunrpc: Fix bit count when setting hashtable size to power-of-two
The hashtable size is incorrectly calculated as the next higher
power-of-two when being set to a power-of-two. fls() returns the
bit number of the most significant set bit, with the least
significant bit being numbered '1'. For a power-of-two, fls()
will return a bit number which is one higher than the number of bits
required, leading to a hashtable which is twice the requested size.
In addition, the value of (1 << nbits) will always be at least num,
so the test will never be true.
Fix the hash table size calculation to correctly set hashtable
size, and eliminate the unnecessary check.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
A generic_cred can be used to look up a unx_cred or a gss_cred, so it's
not really safe to use the the generic_cred->acred->ac_flags to store
the NO_CRKEY_TIMEOUT flag. A lookup for a unx_cred triggered while the
KEY_EXPIRE_SOON flag is already set will cause both NO_CRKEY_TIMEOUT and
KEY_EXPIRE_SOON to be set in the ac_flags, leaving the user associated
with the auth_cred to be in a state where they're perpetually doing 4K
NFS_FILE_SYNC writes.
This can be reproduced as follows:
1. Mount two NFS filesystems, one with sec=krb5 and one with sec=sys.
They do not need to be the same export, nor do they even need to be from
the same NFS server. Also, v3 is fine.
$ sudo mount -o v3,sec=krb5 server1:/export /mnt/krb5
$ sudo mount -o v3,sec=sys server2:/export /mnt/sys
2. As the normal user, before accessing the kerberized mount, kinit with
a short lifetime (but not so short that renewing the ticket would leave
you within the 4-minute window again by the time the original ticket
expires), e.g.
$ kinit -l 10m -r 60m
3. Do some I/O to the kerberized mount and verify that the writes are
wsize, UNSTABLE:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1
4. Wait until you're within 4 minutes of key expiry, then do some more
I/O to the kerberized mount to ensure that RPC_CRED_KEY_EXPIRE_SOON gets
set. Verify that the writes are 4K, FILE_SYNC:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1
5. Now do some I/O to the sec=sys mount. This will cause
RPC_CRED_NO_CRKEY_TIMEOUT to be set:
$ dd if=/dev/zero of=/mnt/sys/file bs=1M count=1
6. Writes for that user will now be permanently 4K, FILE_SYNC for that
user, regardless of which mount is being written to, until you reboot
the client. Renewing the kerberos ticket (assuming it hasn't already
expired) will have no effect. Grabbing a new kerberos ticket at this
point will have no effect either.
Move the flag to the auth->au_flags field (which is currently unused)
and rename it slightly to reflect that it's no longer associated with
the auth_cred->ac_flags. Add the rpc_auth to the arg list of
rpcauth_cred_key_to_expire and check the au_flags there too. Finally,
add the inode to the arg list of nfs_ctx_key_to_expire so we can
determine the rpc_auth to pass to rpcauth_cred_key_to_expire.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If there were less than 2 entries in the multipath list, then
xprt_iter_next_entry_multiple() would never advance beyond the
first entry, which is correct for round robin behaviour, but not
for the list iteration.
The end result would be infinite looping in rpc_clnt_iterate_for_each_xprt()
as we would never see the xprt == NULL condition fulfilled.
Reported-by: Oleg Drokin <green@linuxhacker.ru>
Fixes: 80b14d5e61 ("SUNRPC: Add a structure to track multiple transports")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The current server rpc tcp code attempts to predict how much writeable
socket space will be available to a given RPC call before accepting it
for processing. On a 40GigE network, we've found this throttles
individual clients long before the network or disk is saturated. The
server may handle more clients easily, but the bandwidth of individual
clients is still artificially limited.
Instead of trying (and failing) to predict how much writeable socket space
will be available to the RPC call, just fall back to the simple model of
deferring processing until the socket is uncongested.
This may increase the risk of fast clients starving slower clients; in
such cases, the previous patch allows setting a hard per-connection
limit.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow the user to limit the number of requests serviced through a single
connection, to help prevent faster clients from starving slower clients.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Don't call svc_xprt_enqueue() if the XPT_DATA flag is already set.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Rather than code up our own versions of the socket callbacks, just
call the defaults.
This also allows us to merge svc_udp_data_ready() and svc_tcp_data_ready().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Prevent callbacks from triggering while we're detaching the socket.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Dropping and/or deferring requests has an impact on performance. Let's
make sure we can trace those events.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a tracepoint to track when the processing of incoming RPC data gets
deferred due to out-of-space issues on the outgoing transport.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
GSS-Proxy doesn't produce very much debug logging at all. Printing out
the gss minor status will aid in troubleshooting if the
GSS_Accept_sec_context upcall fails.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Before commit 778be232a2 ("NFS do not find client in NFSv4
pg_authenticate"), the Linux callback server replied with
RPC_AUTH_ERROR / RPC_AUTH_BADCRED, instead of dropping the CB
request. Let's restore that behavior so the server has a chance to
do something useful about it, and provide a warning that helps
admins correct the problem.
Fixes: 778be232a2 ("NFS do not find client in NFSv4 ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If an RPC program does not set vs_dispatch and pc_func() returns
rpc_drop_reply, the server sends a reply anyway containing a single
word containing the value RPC_DROP_REPLY (in network byte-order, of
course). This is a nonsense RPC message.
Fixes: 9e701c6109 ("svcrpc: simpler request dropping")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Direct data placement is not allowed when using flavors that
guarantee integrity or privacy. When such security flavors are in
effect, don't allow the use of Read and Write chunks for moving
individual data items. All messages larger than the inline threshold
are sent via Long Call or Long Reply.
On my systems (CX-3 Pro on FDR), for small I/O operations, the use
of Long messages adds only around 5 usecs of latency in each
direction.
Note that when integrity or encryption is used, the host CPU touches
every byte in these messages. Even if it could be used, data
movement offload doesn't buy much in this case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
fixup_copy_count should count only the number of bytes copied to the
page list. The head and tail are now always handled without a data
copy.
And the debugging at the end of rpcrdma_inline_fixup() is also no
longer necessary, since copy_len will be non-zero when there is reply
data in the tail (a normal and valid case).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Now that rpcrdma_inline_fixup() updates only two fields in
rq_rcv_buf, a full memcpy of that structure to rq_private_buf is
unwarranted. Updating rq_private_buf fields only where needed also
better documents what is going on.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
While trying NFSv4.0/RDMA with sec=krb5p, I noticed small NFS READ
operations failed. After the client unwrapped the NFS READ reply
message, the NFS READ XDR decoder was not able to decode the reply.
The message was "Server cheating in reply", with the reported
number of received payload bytes being zero. Applications reported
a read(2) that returned -1/EIO.
The problem is rpcrdma_inline_fixup() sets the tail.iov_len to zero
when the incoming reply fits entirely in the head iovec. The zero
tail.iov_len confused xdr_buf_trim(), which then mangled the actual
reply data instead of simply removing the trailing GSS checksum.
As near as I can tell, RPC transports are not supposed to update the
head.iov_len, page_len, or tail.iov_len fields in the receive XDR
buffer when handling an incoming RPC reply message. These fields
contain the length of each component of the XDR buffer, and hence
the maximum number of bytes of reply data that can be stored in each
XDR buffer component. I've concluded this because:
- This is how xdr_partial_copy_from_skb() appears to behave
- rpcrdma_inline_fixup() already does not alter page_len
- call_decode() compares rq_private_buf and rq_rcv_buf and WARNs
if they are not exactly the same
Unfortunately, as soon as I tried the simple fix to just remove the
line that sets tail.iov_len to zero, I saw that the logic that
appends the implicit Write chunk pad inline depends on inline_fixup
setting tail.iov_len to zero.
To address this, re-organize the tail iovec handling logic to use
the same approach as with the head iovec: simply point tail.iov_base
to the correct bytes in the receive buffer.
While I remember all this, write down the conclusion in documenting
comments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When the remaining length of an incoming reply is longer than the
XDR buf's page_len, switch over to the tail iovec instead of
copying more than page_len bytes into the page list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently, all three chunk list encoders each use a portion of the
one rl_segments array in rpcrdma_req. This is because the MWs for
each chunk list were preserved in rl_segments so that ro_unmap could
find and invalidate them after the RPC was complete.
However, now that MWs are placed on a per-req linked list as they
are registered, there is no longer any information in rpcrdma_mr_seg
that is shared between ro_map and ro_unmap_{sync,safe}, and thus
nothing in rl_segments needs to be preserved after
rpcrdma_marshal_req is complete.
Thus the rl_segments array can be used now just for the needs of
each rpcrdma_convert_iovs call. Once each chunk list is encoded, the
next chunk list encoder is free to re-use all of rl_segments.
This means all three chunk lists in one RPC request can now each
encode a full size data payload with no increase in the size of
rl_segments.
This is a key requirement for Kerberos support, since both the Call
and Reply for a single RPC transaction are conveyed via Long
messages (RDMA Read/Write). Both can be large.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of placing registered MWs sparsely into the rl_segments
array, place these MWs on a per-req list.
ro_unmap_{sync,safe} can then simply pull those MWs off the list
instead of walking through the array.
This change significantly reduces the size of struct rpcrdma_req
by removing nsegs and rl_mw from every array element.
As an additional clean-up, chunk co-ordinates are returned in the
"*mw" output argument so they are no longer needed in every
array element.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of leaving orphaned MRs to be released when the transport
is destroyed, release them immediately. The MR free list can now be
replenished if it becomes exhausted.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Frequent MR list exhaustion can impact I/O throughput, so enough MRs
are always created during transport set-up to prevent running out.
This means more MRs are created than most workloads need.
Commit 94f58c58c0 ("xprtrdma: Allow Read list and Reply chunk
simultaneously") introduced support for sending two chunk lists per
RPC, which consumes more MRs per RPC.
Instead of trying to provision more MRs, introduce a mechanism for
allocating MRs on demand. A few MRs are allocated during transport
set-up to kick things off.
This significantly reduces the average number of MRs per transport
while allowing the MR count to grow for workloads or devices that
need more MRs.
FRWR with mlx4 allocated almost 400 MRs per transport before this
patch. Now it starts with 32.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up, based on code audit: Remove the possibility that the
chunk list XDR encoders can return zero, which would be interpreted
as a NULL.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit c93c62231c ("xprtrdma: Disconnect on registration failure")
added a disconnect for some RPC marshaling failures. This is needed
only in a handful of cases, but it was triggering for simple stuff
like temporary resource shortages. Try to straighten this out.
Fix up the lower layers so they don't return -ENOMEM or other error
codes that the RPC client's FSM doesn't explicitly recognize.
Also fix up the places in the send_request path that do want a
disconnect. For example, when ib_post_send or ib_post_recv fail,
this is a sign that there is a send or receive queue resource
miscalculation. That should be rare, and is a sign of a software
bug. But xprtrdma can recover: disconnect to reset the transport and
start over.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Not having an rpcrdma_rep at call_allocate time can be a problem.
It means that send_request can't post a receive buffer to catch
the RPC's reply. Possible consequences are RPC timeouts or even
transport deadlock.
Instead of allowing an RPC to proceed if an rpcrdma_rep is
not available, return NULL to force call_allocate to wait and
try again.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: ALLPHYSICAL is gone and FMR has been converted to use
scatterlists. There are no more users of these functions.
This patch shrinks the size of struct rpcrdma_req by about 3500
bytes on x86_64. There is one of these structs for each RPC credit
(128 credits per transport connection).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
No HCA or RNIC in the kernel tree requires the use of ALLPHYSICAL.
ALLPHYSICAL advertises in the clear on the network fabric an R_key
that is good for all of the client's memory. No known exploit
exists, but theoretically any user on the server can use that R_key
on the client's QP to read or update any part of the client's memory.
ALLPHYSICAL exposes the client to server bugs, including:
o base/bounds errors causing data outside the i/o buffer to be
accessed
o RDMA access after reply causing data corruption and/or integrity
fail
ALLPHYSICAL can't protect application memory regions from server
update after a local signal or soft timeout has terminated an RPC.
ALLPHYSICAL chunks are no larger than a page. Special cases to
handle small chunks and long chunk lists have been a source of
implementation complexity and bugs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Based on code audit.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I found that commit ead3f26e35 ("xprtrdma: Add ro_unmap_safe
memreg method"), which introduces ro_unmap_safe, never wired up the
FMR recovery worker.
The FMR and FRWR recovery work queues both do the same thing.
Instead of setting up separate individual work queues for this,
schedule a delayed worker to deal with them, since recovering MRs is
not performance-critical.
Fixes: ead3f26e35 ("xprtrdma: Add ro_unmap_safe memreg method")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The use of a scatterlist for handling DMA mapping and unmapping
was recently introduced in frwr_ops.c in commit 4143f34e01
("xprtrdma: Port to new memory registration API"). That commit did
not make a similar update to xprtrdma's FMR support because the
core ib_map_phys_fmr() and ib_unmap_fmr() APIs have not been changed
to take a scatterlist argument.
However, FMR still needs to do DMA mapping and unmapping. It appears
that RDS, for example, uses a scatterlist for this, then builds the
DMA addr array for the ib_map_phys_fmr call separately. I see that
SRP also utilizes a scatterlist for DMA mapping. xprtrdma can do
something similar.
This modernization is used immediately to properly defer DMA
unmapping during fmr_unmap_safe (a FIXME). It separates the DMA
unmapping coordinates from the rl_segments array. This array, being
part of an rpcrdma_req, is always re-used immediately when an RPC
exits. A scatterlist is allocated in memory independent of the
rl_segments array, so it can be preserved indefinitely (ie, until
the MR invalidation and DMA unmapping can actually be done by a
worker thread).
The FRWR and FMR DMA mapping code are slightly different from each
other now, and will diverge further when the "Check for holes" logic
can be removed from FRWR (support for SG_GAP MRs). So I chose not to
create helpers for the common-looking code.
Fixes: ead3f26e35 ("xprtrdma: Add ro_unmap_safe memreg method")
Suggested-by: Sagi Grimberg <sagi@lightbits.io>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Use the same naming convention used in other
RPC/RDMA-related data structures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Moving these helpers in a separate patch makes later
patches more readable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: FMR is about to replace the rpcrdma_map_one code with
scatterlists. Move the scatterlist fields out of the FRWR-specific
union and into the generic part of rpcrdma_mw.
One minor change: -EIO is now returned if FRWR registration fails.
The RPC is terminated immediately, since the problem is likely due
to a software bug, thus retrying likely won't help.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
ib_unmap_fmr() takes a list of FMRs to unmap. However, it does not
remove the FMRs from this list as it processes them. Other
ib_unmap_fmr() call sites are careful to remove FMRs from the list
after ib_unmap_fmr() returns.
Since commit 7c7a5390dc ("xprtrdma: Add ro_unmap_sync method for FMR")
fmr_op_unmap_sync passes more than one FMR to ib_unmap_fmr(), but
it didn't bother to remove the FMRs from that list once the call was
complete.
I've noticed some instability that could be related to list
tangling by the new fmr_op_unmap_sync() logic. In an abundance
of caution, add some defensive logic to clean up properly after
ib_unmap_fmr().
Fixes: 7c7a5390dc ("xprtrdma: Add ro_unmap_sync method for FMR")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Today what is normally called data (the mount options) is not passed
to fill_super through mount_ns.
Pass the mount options and the namespace separately to mount_ns so
that filesystems such as proc that have mount options, can use
mount_ns.
Pass the user namespace to mount_ns so that the standard permission
check that verifies the mounter has permissions over the namespace can
be performed in mount_ns instead of in each filesystems .mount method.
Thus removing the duplication between mqueuefs and proc in terms of
permission checks. The extra permission check does not currently
affect the rpc_pipefs filesystem and the nfsd filesystem as those
filesystems do not currently allow unprivileged mounts. Without
unpvileged mounts it is guaranteed that the caller has already passed
capable(CAP_SYS_ADMIN) which guarantees extra permission check will
pass.
Update rpc_pipefs and the nfsd filesystem to ensure that the network
namespace reference is always taken in fill_super and always put in kill_sb
so that the logic is simpler and so that errors originating inside of
fill_super do not cause a network namespace leak.
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The spec allows backchannels for multiple clients to share the same tcp
connection. When that happens, we need to use the same xprt for all of
them. Similarly, we need the same xps.
This fixes list corruption introduced by the multipath code.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Trond Myklebust <trondmy@primarydata.com>
Also simplify the logic a bit.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Trond Myklebust <trondmy@primarydata.com>
Callers of rpc_create_xprt expect it to put the xprt on success and
failure.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Trond Myklebust <trondmy@primarydata.com>
Use the low latency transport workqueue to process the task that is
next in line on the xprt->sending queue.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
rpciod can easily get congested due to the long list of queued rpc_tasks.
Having the receive queue wait in turn for those tasks to complete can
therefore be a bottleneck.
Address the problem by separating the workqueues into:
- rpciod: manages rpc_tasks
- xprtiod: manages transport related work.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The only difference between the two at this point is the reset of
the connection timeout, and since everyone expect tcp ignore that value,
we can just throw it into the generic function.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Highlights include:
Features:
- Add support for the NFS v4.2 COPY operation
- Add support for NFS/RDMA over IPv6
Bugfixes and cleanups:
- Avoid race that crashes nfs_init_commit()
- Fix oops in callback path
- Fix LOCK/OPEN race when unlinking an open file
- Choose correct stateids when using delegations in setattr, read and write
- Don't send empty SETATTR after OPEN_CREATE
- xprtrdma: Prevent server from writing a reply into memory client has released
- xprtrdma: Support using Read list and Reply chunk in one RPC call
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QMmY
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.7-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Highlights include:
Features:
- Add support for the NFS v4.2 COPY operation
- Add support for NFS/RDMA over IPv6
Bugfixes and cleanups:
- Avoid race that crashes nfs_init_commit()
- Fix oops in callback path
- Fix LOCK/OPEN race when unlinking an open file
- Choose correct stateids when using delegations in setattr, read and
write
- Don't send empty SETATTR after OPEN_CREATE
- xprtrdma: Prevent server from writing a reply into memory client
has released
- xprtrdma: Support using Read list and Reply chunk in one RPC call"
* tag 'nfs-for-4.7-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (61 commits)
pnfs: pnfs_update_layout needs to consider if strict iomode checking is on
nfs/flexfiles: Use the layout segment for reading unless it a IOMODE_RW and reading is disabled
nfs/flexfiles: Helper function to detect FF_FLAGS_NO_READ_IO
nfs: avoid race that crashes nfs_init_commit
NFS: checking for NULL instead of IS_ERR() in nfs_commit_file()
pnfs: make pnfs_layout_process more robust
pnfs: rework LAYOUTGET retry handling
pnfs: lift retry logic from send_layoutget to pnfs_update_layout
pnfs: fix bad error handling in send_layoutget
flexfiles: add kerneldoc header to nfs4_ff_layout_prepare_ds
flexfiles: remove pointless setting of NFS_LAYOUT_RETURN_REQUESTED
pnfs: only tear down lsegs that precede seqid in LAYOUTRETURN args
pnfs: keep track of the return sequence number in pnfs_layout_hdr
pnfs: record sequence in pnfs_layout_segment when it's created
pnfs: don't merge new ff lsegs with ones that have LAYOUTRETURN bit set
pNFS/flexfiles: When initing reads or writes, we might have to retry connecting to DSes
pNFS/flexfiles: When checking for available DSes, conditionally check for MDS io
pNFS/flexfile: Fix erroneous fall back to read/write through the MDS
NFS: Reclaim writes via writepage are opportunistic
NFSv4: Use the right stateid for delegations in setattr, read and write
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=k6RP
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"A very quiet cycle for nfsd, mainly just an RDMA update from Chuck
Lever"
* tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux:
sunrpc: fix stripping of padded MIC tokens
svcrpc: autoload rdma module
svcrdma: Generalize svc_rdma_xdr_decode_req()
svcrdma: Eliminate code duplication in svc_rdma_recvfrom()
svcrdma: Drain QP before freeing svcrdma_xprt
svcrdma: Post Receives only for forward channel requests
svcrdma: Remove superfluous line from rdma_read_chunks()
svcrdma: svc_rdma_put_context() is invoked twice in Send error path
svcrdma: Do not add XDR padding to xdr_buf page vector
svcrdma: Support IPv6 with NFS/RDMA
nfsd: handle seqid wraparound in nfsd4_preprocess_layout_stateid
Remove unnecessary allocation
The length of the GSS MIC token need not be a multiple of four bytes.
It is then padded by XDR to a multiple of 4 B, but unwrap_integ_data()
would previously only trim mic.len + 4 B. The remaining up to three
bytes would then trigger a check in nfs4svc_decode_compoundargs(),
leading to a "garbage args" error and mount failure:
nfs4svc_decode_compoundargs: compound not properly padded!
nfsd: failed to decode arguments!
This would prevent older clients using the pre-RFC 4121 MIC format
(37-byte MIC including a 9-byte OID) from mounting exports from v3.9+
servers using krb5i.
The trimming was introduced by commit 4c190e2f91 ("sunrpc: trim off
trailing checksum before returning decrypted or integrity authenticated
buffer").
Fixes: 4c190e2f91 "unrpc: trim off trailing checksum..."
Signed-off-by: Tomáš Trnka <ttrnka@mail.muni.cz>
Cc: stable@vger.kernel.org
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This should fix failures like:
# rpc.nfsd --rdma
rpc.nfsd: Unable to request RDMA services: Protocol not supported
Reported-by: Steve Dickson <steved@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
- Updates to the new Intel X722 iWARP driver
- Updates to the hfi1 driver
- Fixes for the iw_cxgb4 driver
- Misc core fixes
- Generic RDMA READ/WRITE API addition
- SRP updates
- Misc ipoib updates
- Minor mlx5 updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXPIAnAAoJELgmozMOVy/dEYUP/0A6NH5ptzUrwPuLrWoz8h+e
KBfJE7H09mfKBx0Rq8YmnU+pz4lk8vrMLLaqpbGN57mwO0a1lK9bgc3E6KUhQPhc
dpGEX/NG1+aILomD7M4l1yAKkG17kxFLD75cLCeaxhO76jBRWsunukqk5mT/u0EG
fUYZs1fRb9t2LDtTNhPfSFR1+dgP5S17xLhpl9ttn87hTmIuiGWR6ig2nTC7azZD
G0d7RVjohfY2sDD28YgQiUEJ+q+1ymp3XTaCZhPCVl9VCRPweEdtLKcbNWZIvClx
ewuTCgADXg8tAL/6zu6bEKqZlC17UrmVJee3csKQLT09PJkSEICeFR/ld6ONUKAF
nDhi3ySa75Xxg9VDcCnuRkXKK+/zi7oDelZuh9mvMG0JJqPK9rTZDD29j2kBf7C0
bdx4R5cI4KJWQ/GlCyi/nLiuYkmAiCugzcGnRho4ub+EJ0yX1w6n8KVYr37kFsFu
q6MCnEfArEgDpbq1wo0+9MWtqBYrnOI/XtG81Zd+6X2MW975qU85wUdUSjg6OOb1
v1osyAmFDy9A0Y80yY+l1HHrSVIvI0IAWZDfxsbCLQY8O03ZNcvxE2RsrzWd5CKL
iZsX24tjV0WR9+lORHLfAKB3DL9CcfHv/tHo7q+5iAHmIuWZGrEN22ELkwS/4X7x
d/V0XDjzs6lgQeTJ7R4B
=e+Zv
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"Primary 4.7 merge window changes
- Updates to the new Intel X722 iWARP driver
- Updates to the hfi1 driver
- Fixes for the iw_cxgb4 driver
- Misc core fixes
- Generic RDMA READ/WRITE API addition
- SRP updates
- Misc ipoib updates
- Minor mlx5 updates"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (148 commits)
IB/mlx5: Fire the CQ completion handler from tasklet
net/mlx5_core: Use tasklet for user-space CQ completion events
IB/core: Do not require CAP_NET_ADMIN for packet sniffing
IB/mlx4: Fix unaligned access in send_reply_to_slave
IB/mlx5: Report Scatter FCS device capability when supported
IB/mlx5: Add Scatter FCS support for Raw Packet QP
IB/core: Add Scatter FCS create flag
IB/core: Add Raw Scatter FCS device capability
IB/core: Add extended device capability flags
i40iw: pass hw_stats by reference rather than by value
i40iw: Remove unnecessary synchronize_irq() before free_irq()
i40iw: constify i40iw_vf_cqp_ops structure
IB/mlx5: Add UARs write-combining and non-cached mapping
IB/mlx5: Allow mapping the free running counter on PROT_EXEC
IB/mlx4: Use list_for_each_entry_safe
IB/SA: Use correct free function
IB/core: Fix a potential array overrun in CMA and SA agent
IB/core: Remove unnecessary check in ibnl_rcv_msg
IB/IWPM: Fix a potential skb leak
RDMA/nes: replace custom print_hex_dump()
...
Clean up.
After "xprtrdma: Remove ro_unmap() from all registration modes",
there are no longer any sites that take rpcrdma_ia::qplock for read.
The one site that takes it for write is always single-threaded. It
is safe to remove it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In a cluster failover scenario, it is desirable for the client to
attempt to reconnect quickly, as an alternate NFS server is already
waiting to take over for the down server. The client can't see that
a server IP address has moved to a new server until the existing
connection is gone.
For fabrics and devices where it is meaningful, set a definite upper
bound on the amount of time before it is determined that a
connection is no longer valid. This allows the RPC client to detect
connection loss in a timely matter, then perform a fresh resolution
of the server GUID in case it has changed (cluster failover).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The ro_unmap method is no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There needs to be a safe method of releasing registered memory
resources when an RPC terminates. Safe can mean a number of things:
+ Doesn't have to sleep
+ Doesn't rely on having a QP in RTS
ro_unmap_safe will be that safe method. It can be used in cases
where synchronous memory invalidation can deadlock, or needs to have
an active QP.
The important case is fencing an RPC's memory regions after it is
signaled (^C) and before it exits. If this is not done, there is a
window where the server can write an RPC reply into memory that the
client has released and re-used for some other purpose.
Note that this is a full solution for FRWR, but FMR and physical
still have some gaps where a particularly bad server can wreak
some havoc on the client. These gaps are not made worse by this
patch and are expected to be exceptionally rare and timing-based.
They are noted in documenting comments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Separate the DMA unmap operation from freeing the MW. In a
subsequent patch they will not always be done at the same time,
and they are not related operations (except by order; freeing
the MW must be the last step during invalidation).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In a subsequent patch, the fr_xprt and fr_worker fields will be
needed by another memory registration mode. Move them into the
generic rpcrdma_mw structure that wraps struct rpcrdma_frmr.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Maintain the order of invalidation and DMA unmapping when doing
a background MR reset.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
frwr_op_unmap_sync() is now invoked in a workqueue context, the same
as __frwr_queue_recovery(). There's no need to defer MR reset if
posting LOCAL_INV MRs fails.
This means that even when ib_post_send() fails (which should occur
very rarely) the invalidation and DMA unmapping steps are still done
in the correct order.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Move the the I/O direction field from rpcrdma_mr_seg into the
rpcrdma_frmr.
This makes it possible to DMA-unmap the frwr long after an RPC has
exited and its rpcrdma_mr_seg array has been released and re-used.
This might occur if an RPC times out while waiting for a new
connection to be established.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Follow same naming convention as other fields in struct
rpcrdma_frwr.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Replace rpcrdma_flush_cqs() and rpcrdma_clean_cqs() with
the new ib_drain_qp() API.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-By: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
rpcrdma_create_chunks() has been replaced, and can be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
rpcrdma_marshal_req() makes a simplifying assumption: that NFS
operations with large Call messages have small Reply messages, and
vice versa. Therefore with RPC-over-RDMA, only one chunk type is
ever needed for each Call/Reply pair, because one direction needs
chunks, the other direction will always fit inline.
In fact, this assumption is asserted in the code:
if (rtype != rpcrdma_noch && wtype != rpcrdma_noch) {
dprintk("RPC: %s: cannot marshal multiple chunk lists\n",
__func__);
return -EIO;
}
But RPCGSS_SEC breaks this assumption. Because krb5i and krb5p
perform data transformation on RPC messages before they are
transmitted, direct data placement techniques cannot be used, thus
RPC messages must be sent via a Long call in both directions.
All such calls are sent with a Position Zero Read chunk, and all
such replies are handled with a Reply chunk. Thus the client must
provide every Call/Reply pair with both a Read list and a Reply
chunk.
Without any special security in effect, NFSv4 WRITEs may now also
use the Read list and provide a Reply chunk. The marshal_req
logic was preventing that, meaning an NFSv4 WRITE with a large
payload that included a GETATTR result larger than the inline
threshold would fail.
The code that encodes each chunk list is now completely contained in
its own function. There is some code duplication, but the trade-off
is that the overall logic should be more clear.
Note that all three chunk lists now share the rl_segments array.
Some additional per-req accounting is necessary to track this
usage. For the same reasons that the above simplifying assumption
has held true for so long, I don't expect more array elements are
needed at this time.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Update documenting comments to reflect code changes over the past
year.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Avoid the latency and interrupt overhead of registering a Write
chunk when handling NFS READ requests of a few hundred bytes or
less.
This change does not interoperate with Linux NFS/RDMA servers
that do not have commit 9d11b51ce7 ('svcrdma: Fix send_reply()
scatter/gather set-up'). Commit 9d11b51ce7 was introduced in v4.3,
and is included in 4.2.y, 4.1.y, and 3.18.y.
Oracle bug 22925946 has been filed to request that the above fix
be included in the Oracle Linux UEK4 NFS/RDMA server.
Red Hat bugzillas 1327280 and 1327554 have been filed to request
that RHEL NFS/RDMA server backports include the above fix.
Workaround: Replace the "proto=rdma,port=20049" mount options
with "proto=tcp" until commit 9d11b51ce7 is applied to your
NFS server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When deciding whether to send a Call inline, rpcrdma_marshal_req
doesn't take into account header bytes consumed by chunk lists.
This results in Call messages on the wire that are sometimes larger
than the inline threshold.
Likewise, when a Write list or Reply chunk is in play, the server's
reply has to emit an RDMA Send that includes a larger-than-minimal
RPC-over-RDMA header.
The actual size of a Call message cannot be estimated until after
the chunk lists have been registered. Thus the size of each
RPC-over-RDMA header can be estimated only after chunks are
registered; but the decision to register chunks is based on the size
of that header. Chicken, meet egg.
The best a client can do is estimate header size based on the
largest header that might occur, and then ensure that inline content
is always smaller than that.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Send buffer space is shared between the RPC-over-RDMA header and
an RPC message. A large RPC-over-RDMA header means less space is
available for the associated RPC message, which then has to be
moved via an RDMA Read or Write.
As more segments are added to the chunk lists, the header increases
in size. Typical modern hardware needs only a few segments to
convey the maximum payload size, but some devices and registration
modes may need a lot of segments to convey data payload. Sometimes
so many are needed that the remaining space in the Send buffer is
not enough for the RPC message. Sending such a message usually
fails.
To ensure a transport can always make forward progress, cap the
number of RDMA segments that are allowed in chunk lists. This
prevents less-capable devices and memory registrations from
consuming a large portion of the Send buffer by reducing the
maximum data payload that can be conveyed with such devices.
For now I choose an arbitrary maximum of 8 RDMA segments. This
allows a maximum size RPC-over-RDMA header to fit nicely in the
current 1024 byte inline threshold with over 700 bytes remaining
for an inline RPC message.
The current maximum data payload of NFS READ or WRITE requests is
one megabyte. To convey that payload on a client with 4KB pages,
each chunk segment would need to handle 32 or more data pages. This
is well within the capabilities of FMR. For physical registration,
the maximum payload size on platforms with 4KB pages is reduced to
32KB.
For FRWR, a device's maximum page list depth would need to be at
least 34 to support the maximum 1MB payload. A device with a smaller
maximum page list depth means the maximum data payload is reduced
when using that device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently the sysctls that allow setting the inline threshold allow
any value to be set.
Small values only make the transport run slower. The default 1KB
setting is as low as is reasonable. And the logic that decides how
to divide a Send buffer between RPC-over-RDMA header and RPC message
assumes (but does not check) that the lower bound is not crazy (say,
57 bytes).
Send and receive buffers share a page with some control information.
Values larger than about 3KB can't be supported, currently.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
RPC-over-RDMA transports have a limit on how large a backward
direction (backchannel) RPC message can be. Ensure that the NFSv4.x
CREATE_SESSION operation advertises this limit to servers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Pass in just the piece of the svc_rqst that is needed
here.
While we're in the area, add an informative documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the server has forced a disconnect, the associated QP has not
been moved to the Error state, and thus Receives are still posted.
Ensure Receives (and any other outstanding WRs) are drained to
release resources that can be freed during teardown of the
svcrdma_xprt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
