Realtek has some sort of "Virtual" IPMI device on the PCI bus as a
KCS controller, but whatever it is, it's not one. Ignore it if seen.
Reported-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Daniel Drake <drake@endlessm.com>
The IPMI spec states:
The purpose of the SPMI Table is to provide a mechanism that can
be used by the OSPM (an ACPI term for “OS Operating System-directed
configuration and Power Management” essentially meaning an ACPI-aware
OS or OS loader) very early in the boot process, e.g., before the
ability to execute ACPI control methods in the OS is available.
When we are probing IPMI in Linux, ACPI control methods are available,
so we shouldn't be probing using SPMI. It could cause some confusion
during the probing process.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The IPMI spec states:
The purpose of the SPMI Table is to provide a mechanism that can
be used by the OSPM (an ACPI term for “OS Operating System-directed
configuration and Power Management” essentially meaning an ACPI-aware
OS or OS loader) very early in the boot process, e.g., before the
ability to execute ACPI control methods in the OS is available.
When we are probing IPMI in Linux, ACPI control methods are available,
so we shouldn't be probing using SPMI. It could cause some confusion
during the probing process.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Jiandi An <anjiandi@codeaurora.org>
If platform_device_alloc() then we should return -ENOMEM instead of
returning success.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Use the ARRAY_SIZE macro on a array poweroff_functions to determine
size of the array. Improvement suggested by Coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The cleanup code for an init failure and for a device removal were
quite similar, consolidate all that into one function.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
device_remove_group() was called on any cleanup, even if the
device attrs had not been added yet. That can occur in certain
error scenarios, so add a flag to know if it has been added.
Also make sure we remove the dev if we added it ourselves.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.15
Cc: Laura Abbott <labbott@redhat.com>
Tested-by: Bill Perkins <wmp@grnwood.net>
And get rid of the license text that is no longer necessary.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Rocky Craig <rocky.craig@hp.com>
Many for coding-style fixes, and update the poll API with the new
type '__poll_t', this is new commit from linux-4.16-rc1.
Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1465255 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The KCS (Keyboard Controller Style) interface is used to perform in-band
IPMI communication between a server host and its BMC (BaseBoard Management
Controllers).
This driver exposes the KCS interface on ASpeed SOCs (AST2400 and AST2500)
as a character device. Such SOCs are commonly used as BMCs and this driver
implements the BMC side of the KCS interface.
Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Provides a device driver for the KCS (Keyboard Controller Style)
IPMI interface which meets the requirement of the BMC (Baseboard
Management Controllers) side for handling the IPMI request from
host system software.
Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com>
[Removed the selectability of IPMI_KCS_BMC, as it doesn't do much
good to have it by itself.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with reworks
to try to attempt to make the code easier to handle in the long run, but
no functional change. There's also some tree-wide sysfs attribute
fixups with lots of acks from the various subsystem maintainers, as well
as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLvPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNzACgkzjPoBytJWbpWFt6SR6L33/u4kEAnRFvVCGL
s6ygQPQhZIjKk2Lxa2hC
=Zihy
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of "big" driver core patches for 4.16-rc1.
The majority of the work here is in the firmware subsystem, with
reworks to try to attempt to make the code easier to handle in the
long run, but no functional change. There's also some tree-wide sysfs
attribute fixups with lots of acks from the various subsystem
maintainers, as well as a handful of other normal fixes and changes.
And finally, some license cleanups for the driver core and sysfs code.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
device property: Define type of PROPERTY_ENRTY_*() macros
device property: Reuse property_entry_free_data()
device property: Move property_entry_free_data() upper
firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
USB: serial: keyspan: Drop firmware Kconfig options
sysfs: remove DEBUG defines
sysfs: use SPDX identifiers
drivers: base: add coredump driver ops
sysfs: add attribute specification for /sysfs/devices/.../coredump
test_firmware: fix missing unlock on error in config_num_requests_store()
test_firmware: make local symbol test_fw_config static
sysfs: turn WARN() into pr_warn()
firmware: Fix a typo in fallback-mechanisms.rst
treewide: Use DEVICE_ATTR_WO
treewide: Use DEVICE_ATTR_RO
treewide: Use DEVICE_ATTR_RW
sysfs.h: Use octal permissions
component: add debugfs support
bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
...
while (some a long time).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJacdBGAAoJEGHzjJCRm/+BNZsQAIW5bn2JbBWem0fh/w1LKDO5
AZL6uEgQWkuU1Puh/AMjYaQcfqqVsBFqO6DWZSbvggHNG6Uh5wNYhQjj+bVPf64C
UWf6/a+9AdvHMnkg6IWV+Sk/ceCNY4OK7BkJRYVQoMv9C0nzePlmm/BPN8vJ6QuM
R0jc15esxikP0s0MvfxSCFaNvajKTYK300lrUJ5tBaSll8AUcSxHAt20tnUr5Jh1
6VVWPUT/3jWnS+jDd0pbw/RK9Mdp1gwuWBMLsIs1ufn33GxrNonB7pvtJ48Mvk8p
XxDbcg1jMaKnjFwvL+O0E4qJzYZpufZx7K3LERFVXZOLbm9//9o8BZWJ3Kyz9ZIY
QAIOrGlJNTWZID9chckXoqPeJYW218s0uQa8RIzw6wwdfIcNL9hLl6GYd8I2LELW
QhXQWrJ98yAr26by/Fs9SKi8HXC1JyCnU731V7ZM9b4D5YekxjJGVY8AmDyXRF0m
xLkO/XiY0rmroT53fYfqz8q4W9TehOfKZXSLu5T+0OBvOiFFwDWnJ4NwRq20M32E
JJay4O76KDIUh3HPU13E7Q3mmLNZ9MYYNBO2KT4jX81dYczO3Si4fV6GCeGAu4uA
jWkqr+hjfFOm2dtNPXFpO7gYfjSzeNwMhp+Yg6yvQmaopNuGUfWiFt96YqPJEETn
E+gTrzVTXprh2EcJzah6
=cnx5
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.16-1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Small fixes for various things, been sitting in next for a while (some
a long time)"
* tag 'for-linus-4.16-1' of git://github.com/cminyard/linux-ipmi:
ipmi_ssif: Remove duplicate NULL check
ipmi/powernv: Fix error return code in ipmi_powernv_probe()
ipmi: use dynamic memory for DMI driver override
ipmi/ipmi_powernv: remove outdated todo in powernv IPMI driver
ipmi: Clear smi_info->thread to prevent use-after-free during module unload
ipmi: use correct string length
ipmi_si: Fix error handling of platform device
ipmi watchdog: fix typo in parameter description
ipmi_si_platform: Fix typo in parameter description
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
Since i2c_unregister_device() became NULL-aware we may remove duplicate
NULL check.
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Fix to return a negative error code from the request_irq() error
handling case instead of 0, as done elsewhere in this function.
Fixes: dce143c338 ("ipmi/powernv: Convert to irq event interface")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Since the IPMI core now queries device IDs dynamically, we no longer
need this todo for implementing this in the powernv driver.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
During code inspection, I found an use-after-free possibility during unloading
ipmi_si in the polling mode.
If start_new_msg() is called after kthread_stop(), the function will try to
wake up non-existing kthread using the dangling pointer.
Possible scenario is when a new internal message is generated after
ipmi_unregister_smi()[*1] and remains after stop_timer_and_thread()
in clenaup_one_si() [*2].
Use-after-free could occur as follows depending on BMC replies.
cleanup_one_si
=> ipmi_unregister_smi
[*1]
=> stop_timer_and_thread
=> kthread_stop(smi_info->thread)
[*2]
=> poll
=> smi_event_handler
=> start_new_msg
=> if (smi_info->thread)
wake_up_process(smi_info->thread) <== use-after-free!!
Although currently it seems no such message is generated in the polling mode,
some changes might introduce that in thefuture. For example in the interrupt
mode, disable_si_irq() does that at [*2].
So let's prevent such a critical issue possibility now.
Signed-off-by: Yamazaki Masamitsu <m-yamazaki@ah.jp.nec.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
gcc-8 reports
drivers/char/ipmi/ipmi_msghandler.c: In function
'panic_op_write_handler':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 16 equals destination size [-Wstringop-truncation]
drivers/char/ipmi/ipmi_watchdog.c: In function 'set_param_str':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 16 equals destination size [-Wstringop-truncation]
We need one less byte or call strlcpy() to make it a nul-terminated
string.
Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cleanup of platform devices created by the IPMI driver was not
being done correctly and could result in a memory leak. So
create a local boolean to know how to clean up those platform
devices.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Fix typo in parameter description.
Fixes: 95e300c052 ("ipmi: Make the DMI probe into a generic platform probe")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
have been in for-next for a while, each since about their creation
date. I forgot the bugzilla reference on the second one (ipmi_si: Fix
oops with PCI devices) so I rebased to add that.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3M4K
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.15-2' of git://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard.
* tag 'for-linus-4.15-2' of git://github.com/cminyard/linux-ipmi:
ipmi_si: fix crash on parisc
ipmi_si: Fix oops with PCI devices
ipmi: Stop timers before cleaning up the module
This patch fixes ipmi crash on parisc introduced in the kernel 4.15-rc.
The pointer io.io_setup is not initialized and thus it causes crash in
try_smi_init when attempting to call new_smi->io.io_setup.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
When the IPMI PCI code was split out, some code was consolidated for
setting the io_setup field in the io structure. The PCI code needed
this set before registration to probe register spacing, though, so
restore the old code for that function.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197999
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Meelis Roos <mroos@linux.ee>
System may crash after unloading ipmi_si.ko module
because a timer may remain and fire after the module cleaned up resources.
cleanup_one_si() contains the following processing.
/*
* Make sure that interrupts, the timer and the thread are
* stopped and will not run again.
*/
if (to_clean->irq_cleanup)
to_clean->irq_cleanup(to_clean);
wait_for_timer_and_thread(to_clean);
/*
* Timeouts are stopped, now make sure the interrupts are off
* in the BMC. Note that timers and CPU interrupts are off,
* so no need for locks.
*/
while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
poll(to_clean);
schedule_timeout_uninterruptible(1);
}
si_state changes as following in the while loop calling poll(to_clean).
SI_GETTING_MESSAGES
=> SI_CHECKING_ENABLES
=> SI_SETTING_ENABLES
=> SI_GETTING_EVENTS
=> SI_NORMAL
As written in the code comments above,
timers are expected to stop before the polling loop and not to run again.
But the timer is set again in the following process
when si_state becomes SI_SETTING_ENABLES.
=> poll
=> smi_event_handler
=> handle_transaction_done
// smi_info->si_state == SI_SETTING_ENABLES
=> start_getting_events
=> start_new_msg
=> smi_mod_timer
=> mod_timer
As a result, before the timer set in start_new_msg() expires,
the polling loop may see si_state becoming SI_NORMAL
and the module clean-up finishes.
For example, hard LOCKUP and panic occurred as following.
smi_timeout was called after smi_event_handler,
kcs_event and hangs at port_inb()
trying to access I/O port after release.
[exception RIP: port_inb+19]
RIP: ffffffffc0473053 RSP: ffff88069fdc3d80 RFLAGS: 00000006
RAX: ffff8806800f8e00 RBX: ffff880682bd9400 RCX: 0000000000000000
RDX: 0000000000000ca3 RSI: 0000000000000ca3 RDI: ffff8806800f8e40
RBP: ffff88069fdc3d80 R8: ffffffff81d86dfc R9: ffffffff81e36426
R10: 00000000000509f0 R11: 0000000000100000 R12: 0000000000]:000000
R13: 0000000000000000 R14: 0000000000000246 R15: ffff8806800f8e00
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000
--- <NMI exception stack> ---
To fix the problem I defined a flag, timer_can_start,
as member of struct smi_info.
The flag is enabled immediately after initializing the timer
and disabled immediately before waiting for timer deletion.
Fixes: 0cfec916e8 ("ipmi: Start the timer and thread on internal msgs")
Signed-off-by: Yamazaki Masamitsu <m-yamazaki@ah.jp.nec.com>
[Adjusted for recent changes in the driver.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Pull compat and uaccess updates from Al Viro:
- {get,put}_compat_sigset() series
- assorted compat ioctl stuff
- more set_fs() elimination
- a few more timespec64 conversions
- several removals of pointless access_ok() in places where it was
followed only by non-__ variants of primitives
* 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits)
coredump: call do_unlinkat directly instead of sys_unlink
fs: expose do_unlinkat for built-in callers
ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs()
ipmi: get rid of pointless access_ok()
pi433: sanitize ioctl
cxlflash: get rid of pointless access_ok()
mtdchar: get rid of pointless access_ok()
r128: switch compat ioctls to drm_ioctl_kernel()
selection: get rid of field-by-field copyin
VT_RESIZEX: get rid of field-by-field copyin
i2c compat ioctls: move to ->compat_ioctl()
sched_rr_get_interval(): move compat to native, get rid of set_fs()
mips: switch to {get,put}_compat_sigset()
sparc: switch to {get,put}_compat_sigset()
s390: switch to {get,put}_compat_sigset()
ppc: switch to {get,put}_compat_sigset()
parisc: switch to {get,put}_compat_sigset()
get_compat_sigset()
get rid of {get,put}_compat_itimerspec()
io_getevents: Use timespec64 to represent timeouts
...
This is signed by my new key (919BFF81), which is now signed by my
old key.
This is a fairly large rework of the IPMI code, along with a bunch
of smaller fixes. The major changes have been in the next tree for
a couple of months, so they should be good to do in.
- Some users had IPMI systems where the GUID of the IPMI controller
could change. So rescanning of the GUID was added. The naming of
some sysfs things was dependent on the GUID, however, so this
resulted in the sysfs interface code in IPMI changing to remove that
dependency and name the IPMI BMCs like other sysfs devices.
- The ipmi_si_intf.c code was fairly bloated with all the different
discovery methods (PCI, ACPI, SMBIOS, OF, platform, module parameters,
hot add). The structure of how the interfaces were added was redone
to make them more modular, then the individual methods were pulled
out into their own files.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8zFf
-----END PGP SIGNATURE-----
Merge tag 'ipmi-for-4.15' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"This is a fairly large rework of the IPMI code, along with a bunch of
smaller fixes. The major changes have been in the next tree for a
couple of months, so they should be good to do in.
- Some users had IPMI systems where the GUID of the IPMI controller
could change. So rescanning of the GUID was added. The naming of
some sysfs things was dependent on the GUID, however, so this
resulted in the sysfs interface code in IPMI changing to remove
that dependency and name the IPMI BMCs like other sysfs devices.
- The ipmi_si_intf.c code was fairly bloated with all the different
discovery methods (PCI, ACPI, SMBIOS, OF, platform, module
parameters, hot add). The structure of how the interfaces were
added was redone to make them more modular, then the individual
methods were pulled out into their own files"
* tag 'ipmi-for-4.15' of git://github.com/cminyard/linux-ipmi: (48 commits)
ipmi_si: Delete an error message for a failed memory allocation in try_smi_init()
ipmi_si: fix memory leak on new_smi
ipmi: remove redundant initialization of bmc
ipmi: pr_err() strings should end with newlines
ipmi: Clean up some print operations
ipmi: Make the DMI probe into a generic platform probe
ipmi: Make the IPMI proc interface configurable
ipmi_ssif: Add device attrs for the things in proc
ipmi_si: Add device attrs for the things in proc
ipmi_si: remove ipmi_smi_alloc() function
ipmi_si: Move port and mem I/O handling to their own files
ipmi_si: Get rid of unused spacing and port fields
ipmi_si: Move PARISC handling to another file
ipmi_si: Move PCI setup to another file
ipmi_si: Move platform device handling to another file
ipmi_si: Move hardcode handling to a separate file.
ipmi_si: Move the hotmod handling to another file.
ipmi_si: Change ipmi_si_add_smi() to take just I/O info
ipmi_si: Move io setup into io structure
ipmi_si: Move irq setup handling into the io struct
...
Summary of modules changes for the 4.15 merge window:
- Treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- Minor code cleanups
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8vb
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Summary of modules changes for the 4.15 merge window:
- treewide module_param_call() cleanup, fix up set/get function
prototype mismatches, from Kees Cook
- minor code cleanups"
* tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Do not paper over type mismatches in module_param_call()
treewide: Fix function prototypes for module_param_call()
module: Prepare to convert all module_param_call() prototypes
kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several function prototypes for the set/get functions defined by
module_param_call() have a slightly wrong argument types. This fixes
those in an effort to clean up the calls when running under type-enforced
compiler instrumentation for CFI. This is the result of running the
following semantic patch:
@match_module_param_call_function@
declarer name module_param_call;
identifier _name, _set_func, _get_func;
expression _arg, _mode;
@@
module_param_call(_name, _set_func, _get_func, _arg, _mode);
@fix_set_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._set_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _set_func(
-_val_type _val
+const char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
@fix_get_prototype
depends on match_module_param_call_function@
identifier match_module_param_call_function._get_func;
identifier _val, _param;
type _val_type, _param_type;
@@
int _get_func(
-_val_type _val
+char * _val
,
-_param_type _param
+const struct kernel_param * _param
) { ... }
Two additional by-hand changes are included for places where the above
Coccinelle script didn't notice them:
drivers/platform/x86/thinkpad_acpi.c
fs/lockd/svc.c
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The error exit path omits kfree'ing the allocated new_smi, causing a memory
leak. Fix this by kfree'ing new_smi.
Detected by CoverityScan, CID#14582571 ("Resource Leak")
Fixes: 7e030d6dff ("ipmi: Prefer ACPI system interfaces over SMBIOS ones")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The pointer bmc is being initialized and this initialized value is
never being read, so this is assignment redundant and can be removed.
Cleans up clang warning:
warning: Value stored to 'bmc' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Get rid of all printfs, using dev_xxx() if a device is available,
pr_xxx() otherwise, and format long strings properly.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Rework the DMI probe function to be a generic platform probe, and
then rework the DMI code (and a few other things) to use the more
generic information. This is so other things can declare platform
IPMI devices.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Create a device attribute for everything we show in proc, getting
ready for removing the proc stuff.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Create a device attribute for everything we show in proc, getting
ready for removing the proc stuff.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Instead of allocating the smi_info structure, filling in the I/O
info, and passing it to ipmi_si_add_smi(), just pass the I/O
info in the io structure and let ipmi_si_add_smi() allocate
the smi_info structure.
This required redoing the way the remove functions for some
device interfaces worked, a new function named
ipmi_si_remove_by_dev() allows the device to be passed in and
detected instead of using driver data, which couldn't be
filled out easily othersize.
After this the platform handling should be decoupled from the
smi_info structure and that handling can be pulled out to its
own files.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
So the platform code can do it without having to access the
smi info, getting ready for pulling the platform handling
section to their own files.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
That's where it belongs, and we are getting ready for moving the
platform handling out of the main ipmi_si_intf.c file.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
A BMC's guid or device id info may change dynamically, this could
result in a different configuration that needs to be done. Adjust
the BMCs dynamically.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This is getting ready for the ability to redo the BMC if it's
information changes, we need a fallback mechanism.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Currently, it's up to the IPMI SMIs to provide the product & version
details of BMCs behind registered IPMI SMI interfaces. This device ID is
provided on SMI regsitration, and kept around for all future queries.
However, this version information isn't always static. For example, a
BMC may be upgraded at runtime, making the old version information
stale.
This change allows querying the BMC device ID & version information
dynamically. If no static device_id argument is provided to
ipmi_register_smi, then the IPMI core code will perform a Get Device ID
IPMI command to query the version information when needed. We keep a
short-term cache of this information so we don't need to re-query
for every attribute access.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
I basically rewrote this, I fixed some locking issues and simplified
things. Same functional change, though.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There are a lot of bad things that a set of BMCs could do that
would really confuse the IPMI driver; it's possible for BMCs with
different GUIDs to have the same product/devid (though that's
not technically legal), which would result in platform device
namespace collisions. Fixing it would involve either using
the GUID in the BMC name, which resulted in huge names, or
just using an ida for numbering the BMCs. The latter approach
was chosen to avoid the huge names.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Currently, ipmi_demagle_device_id requires a full response buffer in its
data argument. This means we can't use it to parse a response in a
struct ipmi_recv_msg, which has the netfn and cmd as separate bytes.
This change alters the definition and users of ipmi_demangle_device_id
to use a split netfn, cmd and data buffer, so it can be used with
non-sequential responses.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Fixed the ipmi_ssif.c and ipmi_si_intf.c changes to use data from the
response, not the data from the message, when passing info to the
ipmi_demangle_device_id() function.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
In an upcoming change, we'll want to grab a reference to the ipmi_smi_t
from a struct bmc_device. This change adds a pointer to allow this.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reworked to support multiple interfaces on a BMC.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This makes getting the device id consistent, and make it possible
to add a function to fetch it dynamically later.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There was a certain error case where the BMC wouldn't be deregistered
like it should be. Rework the BMC registration to make calling
ipmi_bmc_unregister() ok even if it's not registered and to clean up
the error handling for ipmi_bmc_register().
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The recent changes to add SMBIOS (DMI) IPMI interfaces as platform
devices caused DMI to be selected before ACPI, causing ACPI type
of operations to not work.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
BMC device refcounts were not being decremented after fetching from
driver_find_device(). Also, document the use of ipmidriver_mutex
and tighten it's span some by incrementing the BMC's usecount in
the BMC find routines and not later. This will be important for
future changes where a long mutex hold area will complicate things.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Make this const as it is only passed to a const argument of the function
ipmi_create_user.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
They were set by config items, but people complained that they were
never turned on. So have them always available and enabled by a
module parameter.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The function ipmi_get_info_from_resources is local to the source and
does not need to be in global scope, so make it static. Add in
newline to function declaration to make it checkpatch warning clean.
Cleans up sparse warnings:
symbol 'ipmi_get_info_from_resources' was not declared. Should it
be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
When I set the timeout to a specific value such as 500ms, the timeout
event will not happen in time due to the overflow in function
check_msg_timeout:
...
ent->timeout -= timeout_period;
if (ent->timeout > 0)
return;
...
The type of timeout_period is long, but ent->timeout is unsigned long.
This patch makes the type consistent.
Reported-by: Weilong Chen <chenweilong@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Weilong Chen <chenweilong@huawei.com>
Cc: <stable@vger.kernel.org> # 3.16.x
When ipmi is probed via ACPI, the boot log shows
[ 17.945139] ipmi_si IPI0001:00: probing via device tree
[ 17.950369] ipmi_si IPI0001:00: ipmi_si: probing via ACPI
[ 17.955795] ipmi_si IPI0001:00: [io 0x00e4-0x3fff] regsize 1 spacing 1 irq 0
[ 17.962932] ipmi_si: Adding ACPI-specified bt state machine
which "ipmi_si IPI0001:00: probing via device tree" is misleading
with a ACPI HID "IPI0001" but probing via DT.
Eliminate this misleading print info by checking of_node is valid
or not before calling of_ipmi_probe().
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The medium sized change is adding a platform device for IPMI entries
in the DMI table. Otherwise there is no auto loading for IPMI
devices if they are only in the DMI table.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlljviUACgkQIXnXXONXERdehACfeQNbSg4+HExytHk2BgT5WfN3
iJoAoIKWINgfR7xHSrQtB3ybzznlKMYY
=proo
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.13-v2' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Some small fixes for IPMI, and one medium sized changed.
The medium sized change is adding a platform device for IPMI entries
in the DMI table. Otherwise there is no auto loading for IPMI devices
if they are only in the DMI table"
* tag 'for-linus-4.13-v2' of git://github.com/cminyard/linux-ipmi:
ipmi:ssif: Add missing unlock in error branch
char: ipmi: constify bmc_dev_attr_group and bmc_device_type
ipmi:ssif: Check dev before setting drvdata
ipmi: Convert DMI handling over to a platform device
ipmi: Create a platform device for a DMI-specified IPMI interface
ipmi: use rcu lock around call to intf->handlers->sender()
ipmi:ssif: Use i2c_adapter_id instead of adapter->nr
ipmi: Use the proper default value for register size in ACPI
ipmi_ssif: remove redundant null check on array client->adapter->name
ipmi/watchdog: fix watchdog timeout set on reboot
ipmi_ssif: unlock on allocation failure
Pull misc compat stuff updates from Al Viro:
"This part is basically untangling various compat stuff. Compat
syscalls moved to their native counterparts, getting rid of quite a
bit of double-copying and/or set_fs() uses. A lot of field-by-field
copyin/copyout killed off.
- kernel/compat.c is much closer to containing just the
copyin/copyout of compat structs. Not all compat syscalls are gone
from it yet, but it's getting there.
- ipc/compat_mq.c killed off completely.
- block/compat_ioctl.c cleaned up; floppy compat ioctls moved to
drivers/block/floppy.c where they belong. Yes, there are several
drivers that implement some of the same ioctls. Some are m68k and
one is 32bit-only pmac. drivers/block/floppy.c is the only one in
that bunch that can be built on biarch"
* 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
mqueue: move compat syscalls to native ones
usbdevfs: get rid of field-by-field copyin
compat_hdio_ioctl: get rid of set_fs()
take floppy compat ioctls to sodding floppy.c
ipmi: get rid of field-by-field __get_user()
ipmi: get COMPAT_IPMICTL_RECEIVE_MSG in sync with the native one
rt_sigtimedwait(): move compat to native
select: switch compat_{get,put}_fd_set() to compat_{get,put}_bitmap()
put_compat_rusage(): switch to copy_to_user()
sigpending(): move compat to native
getrlimit()/setrlimit(): move compat to native
times(2): move compat to native
compat_{get,put}_bitmap(): use unsafe_{get,put}_user()
fb_get_fscreeninfo(): don't bother with do_fb_ioctl()
do_sigaltstack(): lift copying to/from userland into callers
take compat_sys_old_getrlimit() to native syscall
trim __ARCH_WANT_SYS_OLD_GETRLIMIT
When getting flags, a response to a different message would
result in a deadlock because of a missing unlock. Add that
unlock and a comment. Found by static analysis.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org # 3.19
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that the IPMI DMI code creates a platform device for IPMI devices
in the firmware, use that instead of handling all the DMI work
in the IPMI drivers themselves.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Andy Lutomirski <luto@kernel.org>
Create a platform device for each IPMI device in the DMI table,
a separate kind of device for SSIF types and for KCS, BT, and
SMIC types. This is so auto-loading IPMI devices will work
from just SMBIOS tables.
This also adds the ability to extract the slave address from
the SMBIOS tables, so that when the driver uses ACPI-specified
interfaces, it can still extract the slave address from SMBIOS.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Andy Lutomirski <luto@kernel.org>
A vendor with a system having more than 128 CPUs occasionally encounters
the following crash during shutdown. This is not an easily reproduceable
event, but the vendor was able to provide the following analysis of the
crash, which exhibits the same footprint each time.
crash> bt
PID: 0 TASK: ffff88017c70ce70 CPU: 5 COMMAND: "swapper/5"
#0 [ffff88085c143ac8] machine_kexec at ffffffff81059c8b
#1 [ffff88085c143b28] __crash_kexec at ffffffff811052e2
#2 [ffff88085c143bf8] crash_kexec at ffffffff811053d0
#3 [ffff88085c143c10] oops_end at ffffffff8168ef88
#4 [ffff88085c143c38] no_context at ffffffff8167ebb3
#5 [ffff88085c143c88] __bad_area_nosemaphore at ffffffff8167ec49
#6 [ffff88085c143cd0] bad_area_nosemaphore at ffffffff8167edb3
#7 [ffff88085c143ce0] __do_page_fault at ffffffff81691d1e
#8 [ffff88085c143d40] do_page_fault at ffffffff81691ec5
#9 [ffff88085c143d70] page_fault at ffffffff8168e188
[exception RIP: unknown or invalid address]
RIP: ffffffffa053c800 RSP: ffff88085c143e28 RFLAGS: 00010206
RAX: ffff88017c72bfd8 RBX: ffff88017a8dc000 RCX: ffff8810588b5ac8
RDX: ffff8810588b5a00 RSI: ffffffffa053c800 RDI: ffff8810588b5a00
RBP: ffff88085c143e58 R8: ffff88017c70d408 R9: ffff88017a8dc000
R10: 0000000000000002 R11: ffff88085c143da0 R12: ffff8810588b5ac8
R13: 0000000000000100 R14: ffffffffa053c800 R15: ffff8810588b5a00
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
<IRQ stack>
[exception RIP: cpuidle_enter_state+82]
RIP: ffffffff81514192 RSP: ffff88017c72be50 RFLAGS: 00000202
RAX: 0000001e4c3c6f16 RBX: 000000000000f8a0 RCX: 0000000000000018
RDX: 0000000225c17d03 RSI: ffff88017c72bfd8 RDI: 0000001e4c3c6f16
RBP: ffff88017c72be78 R8: 000000000000237e R9: 0000000000000018
R10: 0000000000002494 R11: 0000000000000001 R12: ffff88017c72be20
R13: ffff88085c14f8e0 R14: 0000000000000082 R15: 0000001e4c3bb400
ORIG_RAX: ffffffffffffff10 CS: 0010 SS: 0018
This is the corresponding stack trace
It has crashed because the area pointed with RIP extracted from timer
element is already removed during a shutdown process.
The function is smi_timeout().
And we think ffff8810588b5a00 in RDX is a parameter struct smi_info
crash> rd ffff8810588b5a00 20
ffff8810588b5a00: ffff8810588b6000 0000000000000000 .`.X............
ffff8810588b5a10: ffff880853264400 ffffffffa05417e0 .D&S......T.....
ffff8810588b5a20: 24a024a000000000 0000000000000000 .....$.$........
ffff8810588b5a30: 0000000000000000 0000000000000000 ................
ffff8810588b5a30: 0000000000000000 0000000000000000 ................
ffff8810588b5a40: ffffffffa053a040 ffffffffa053a060 @.S.....`.S.....
ffff8810588b5a50: 0000000000000000 0000000100000001 ................
ffff8810588b5a60: 0000000000000000 0000000000000e00 ................
ffff8810588b5a70: ffffffffa053a580 ffffffffa053a6e0 ..S.......S.....
ffff8810588b5a80: ffffffffa053a4a0 ffffffffa053a250 ..S.....P.S.....
ffff8810588b5a90: 0000000500000002 0000000000000000 ................
Unfortunately the top of this area is already detroyed by someone.
But because of two reasonns we think this is struct smi_info
1) The address included in between ffff8810588b5a70 and ffff8810588b5a80:
are inside of ipmi_si_intf.c see crash> module ffff88085779d2c0
2) We've found the area which point this.
It is offset 0x68 of ffff880859df4000
crash> rd ffff880859df4000 100
ffff880859df4000: 0000000000000000 0000000000000001 ................
ffff880859df4010: ffffffffa0535290 dead000000000200 .RS.............
ffff880859df4020: ffff880859df4020 ffff880859df4020 @.Y.... @.Y....
ffff880859df4030: 0000000000000002 0000000000100010 ................
ffff880859df4040: ffff880859df4040 ffff880859df4040 @@.Y....@@.Y....
ffff880859df4050: 0000000000000000 0000000000000000 ................
ffff880859df4060: 0000000000000000 ffff8810588b5a00 .........Z.X....
ffff880859df4070: 0000000000000001 ffff880859df4078 ........x@.Y....
If we regards it as struct ipmi_smi in shutdown process
it looks consistent.
The remedy for this apparent race is affixed below.
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Cc: stable@vger.kernel.org # 3.19
This was first introduced in 7ea0ed2b5b ipmi: Make the
message handler easier to use for SMI interfaces
where some code was moved outside of the rcu_read_lock()
and the lock was not added.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The null check on client->adapter->name is redundant as name is an
array of I2C_NAME_SIZE chars and hence can never be null. We may as
well remove this redundant check.
Detected by CoverityScan, CID#1375918 ("Array compared against 0")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
-----BEGIN PGP SIGNATURE-----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=lbS7
-----END PGP SIGNATURE-----
Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull hw lockdown support from David Howells:
"Annotation of module parameters that configure hardware resources
including ioports, iomem addresses, irq lines and dma channels.
This allows a future patch to prohibit the use of such module
parameters to prevent that hardware from being abused to gain access
to the running kernel image as part of locking the kernel down under
UEFI secure boot conditions.
Annotations are made by changing:
module_param(n, t, p)
module_param_named(n, v, t, p)
module_param_array(n, t, m, p)
to:
module_param_hw(n, t, hwtype, p)
module_param_hw_named(n, v, t, hwtype, p)
module_param_hw_array(n, t, hwtype, m, p)
where the module parameter refers to a hardware setting
hwtype specifies the type of the resource being configured. This can
be one of:
ioport Module parameter configures an I/O port
iomem Module parameter configures an I/O mem address
ioport_or_iomem Module parameter could be either (runtime set)
irq Module parameter configures an I/O port
dma Module parameter configures a DMA channel
dma_addr Module parameter configures a DMA buffer address
other Module parameter configures some other value
Note that the hwtype is compile checked, but not currently stored (the
lockdown code probably won't require it). It is, however, there for
future use.
A bonus is that the hwtype can also be used for grepping.
The intention is for the kernel to ignore or reject attempts to set
annotated module parameters if lockdown is enabled. This applies to
options passed on the boot command line, passed to insmod/modprobe or
direct twiddling in /sys/module/ parameter files.
The module initialisation then needs to handle the parameter not being
set, by (1) giving an error, (2) probing for a value or (3) using a
reasonable default.
What I can't do is just reject a module out of hand because it may
take a hardware setting in the module parameters. Some important
modules, some ipmi stuff for instance, both probe for hardware and
allow hardware to be manually specified; if the driver is aborts with
any error, you don't get any ipmi hardware.
Further, trying to do this entirely in the module initialisation code
doesn't protect against sysfs twiddling.
[!] Note that in and of itself, this series of patches should have no
effect on the the size of the kernel or code execution - that is
left to a patch in the next series to effect. It does mark
annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
an already existing field"
* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
Annotate hardware config module parameters in sound/pci/
Annotate hardware config module parameters in sound/oss/
Annotate hardware config module parameters in sound/isa/
Annotate hardware config module parameters in sound/drivers/
Annotate hardware config module parameters in fs/pstore/
Annotate hardware config module parameters in drivers/watchdog/
Annotate hardware config module parameters in drivers/video/
Annotate hardware config module parameters in drivers/tty/
Annotate hardware config module parameters in drivers/staging/vme/
Annotate hardware config module parameters in drivers/staging/speakup/
Annotate hardware config module parameters in drivers/staging/media/
Annotate hardware config module parameters in drivers/scsi/
Annotate hardware config module parameters in drivers/pcmcia/
Annotate hardware config module parameters in drivers/pci/hotplug/
Annotate hardware config module parameters in drivers/parport/
Annotate hardware config module parameters in drivers/net/wireless/
Annotate hardware config module parameters in drivers/net/wan/
Annotate hardware config module parameters in drivers/net/irda/
Annotate hardware config module parameters in drivers/net/hamradio/
Annotate hardware config module parameters in drivers/net/ethernet/
...
systemd by default starts watchdog on reboot and sets the timer to
ShutdownWatchdogSec=10min. Reboot handler in ipmi_watchdog than reduces
the timer to 120s which is not enough time to boot a Xen machine with
a lot of RAM. As a result the machine is rebooted the second time
during the long run of (XEN) Scrubbing Free RAM.....
Fix this by setting the timer to 120s only if it was previously
set to a low value.
Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
We should unlock and re-enable IRQs if this allocation fails.
Fixes: 259307074b ("ipmi: Add SMBus interface driver (SSIF) ")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Commit c49c097610 ("ipmi: Don't call receive handler in the
panic context") means that the panic_recv_free is not called during a
panic and the atomic count does not drop to 0.
Fix this by only expecting one decrement of the atomic variable
which comes from panic_smi_free.
Signed-off-by: Robert Lippert <rlippert@google.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image. Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.
To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify. The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.
Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.
This patch annotates drivers in drivers/char/ipmi/.
Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
cc: openipmi-developer@lists.sourceforge.net
Commit 1abf71e moved the creation of new_smi->dev to earlier in the init
sequence in order to provide infrastructure for log printing.
However, the init_name was created with a hard-coded value of zero. This
presents a problem in systems with more than one interface, producing a
call trace in dmesg.
To correct the problem, simply use smi_num instead of the hard-coded
value of zero.
Tested on a lenovo x3950.
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
There was actually a more general problem, the platform device wasn't
being set correctly, either, and there was a possible (though extremely
unlikely) race on smi_num. Add locks to clean up the race and use the
proper value for the platform device, too.
Tested on qemu in various configurations.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The ast2500 SoCs contain the same IPMI BT device.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Use setup_timer() instead of init_timer() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
msg_written_handler() may set ssif_info->multi_data to NULL
when using ipmitool to write fru.
Before setting ssif_info->multi_data to NULL, add new local
pointer "data_to_send" and store correct i2c data pointer to
it to fix NULL pointer kernel panic and incorrect ssif_info->multi_pos.
Signed-off-by: Joeseph Chang <joechang@codeaurora.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 3.19-
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The registers for the bt-bmc device live under the Aspeed LPC
controller. Devicetree bindings have recently been introduced for the
LPC controller where the "host" portion of the LPC register space is
described as a syscon device. Future devicetrees describing the bt-bmc
device should nest its node under the appropriate "simple-mfd", "syscon"
compatible node.
This change allows the bt-bmc driver to function with both syscon and
non-syscon- based devicetree descriptions by always using a regmap for
register access, either retrieved from the parent syscon device or
instantiated if none exists.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Declare ipmi_smi_handlers structures as const as they are only passed as
an argument to the function ipmi_register_smi. This argument is of type
const, so ipmi_smi_handlers structures having similar properties can be
declared const too.
Done using Coccinelle:
@r1 disable optional_qualifier@
identifier i;
position p;
@@
static struct ipmi_smi_handlers i@p={...};
@ok1@
identifier r1.i;
position p;
@@
ipmi_register_smi(&i@p,...)
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct ipmi_smi_handlers i;
Size details after cross compiling the .o file for powerpc architecture
File size before:
text data bss dec hex filename
2777 288 0 3065 bf9 drivers/char/ipmi/ipmi_powernv.o
File size after:
text data bss dec hex filename
2873 192 0 3065 bf9 drivers/char/ipmi/ipmi_powernv.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
convertion printk() to pr_xxx() and removal of an unused module
parameter. Some small bug fixes and enhancements.
This also adds a post softdep from the IPMI core module to the
IPMI device interface. Many people have complained that the device
interface isn't automatically avaiable when IPMI is loaded. I don't
want to make the device interface mandatory, though, plenty of people
use IPMI internally (like with ACPI) and don't need a device interface
or the added possible security entry. A softdep should make it work
"out of the box" but allow people to not have it if they don't want it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlhSE9cACgkQIXnXXONXERe6iACgsiU5/LG4tbKu9EyZXp5isRw6
AdsAn1dT08aobOzJhFI3dVx6oTnJQDDC
=ifi5
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.10' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Various small fixes for IPMI. Cleanups in the documentation and
convertion printk() to pr_xxx() and removal of an unused module
parameter. Some small bug fixes and enhancements.
This also adds a post softdep from the IPMI core module to the IPMI
device interface. Many people have complained that the device
interface isn't automatically avaiable when IPMI is loaded. I don't
want to make the device interface mandatory, though, plenty of people
use IPMI internally (like with ACPI) and don't need a device interface
or the added possible security entry. A softdep should make it work
'out of the box' but allow people to not have it if they don't want
it"
* tag 'for-linus-4.10' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: create hardware-independent softdep for ipmi_devintf
ipmi: Fix sequence number handling
ipmi: Pick up slave address from SMBIOS on an ACPI device
ipmi_si: Clean up printks
Move platform device creation earlier in the initialization
ipmi: Update documentation
ipmi_ssif: Remove an unused module parameter
ipmi: Periodically check for events, not messages
When a computer has an IPMI system interface, the device interface
is most probably also desired. Autoloading of ipmi_devintf currently
works only if ipmi_si has allocated a platform device. That doesn't
happen if the SI interface was detected e.g. via ACPI. But ACPI
detection is preferred these days, see e.g. kernel.org bug 46741.
This patch introduces a softdep in place of the existing modalias
for ipmi_devintf.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Suggested-by: Takashi Iwai <tiwai@suse.com>
I moved this to ipmi_msghandler.c, so it works for all IPMI
interfaces. Retested by Martin.
Tested-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The IPMI message handler uses a message id that the lower-layer
preserved to track the sequence number of the message. The macros
that handled these sequence numbers were somewhat broken as they
could result in sequence number truncation and they were not
doing an "and" of the proper number of bits.
I think this actually is not a problem, because the truncation
should be harmless and the improper "and" didn't hurt anything
because sequence number generation used the same improper "and"
and wouldn't generate a sequence number that would get
truncated wrong. However, it should be fixed.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
When added by ACPI, the information does not contain the slave address
of the BMC. However, that information is available from SMBIOS. So
if we add a device that doesn't have a slave address, look at the other
devices that are duplicate interfaces and see if they have a slave
address.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Some logs are printed out early using smi->dev, but on a platform device
that is not created until later. So move the creation of that device
structure earlier in the sequence so it can be used for printing.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
The Aspeed SoCs have two BT interfaces : one is IPMI compliant and the
other is H8S/2168 compliant.
The current ipmi/bt-bmc driver implements the IPMI version and we
should reflect its nature in the compatible node name using
'aspeed,ast2400-ibt-bmc' instead of 'aspeed,ast2400-bt-bmc'. The
latter should be used for a H8S interface driver if it is implemented
one day.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit d9b7e4f717 ("ipmi: Periodically check to see if irqs and
messages are set right") to verify the contents of global events.
However, the wrong function was being called in some cases, checking
for messages, not events.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Jason DiPietro <J.DiPietro@F5.com>
Remove unneeded error handling on the result of a call
to platform_get_resource() when the value is passed to
devm_ioremap_resource().
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
devm_ioremap_resource returns ERR_PTR so we can't check for NULL.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This patch adds a simple device driver to expose the iBT interface on
Aspeed SOCs (AST2400 and AST2500) as a character device. Such SOCs are
commonly used as BMCs (BaseBoard Management Controllers) and this
driver implements the BMC side of the BT interface.
The BT (Block Transfer) interface is used to perform in-band IPMI
communication between a host and its BMC. Entire messages are buffered
before sending a notification to the other end, host or BMC, that
there is data to be read. Usually, the host emits requests and the BMC
responses but the specification provides a mean for the BMC to send
SMS Attention (BMC-to-Host attention or System Management Software
attention) messages.
For this purpose, the driver introduces a specific ioctl on the
device: 'BT_BMC_IOCTL_SMS_ATN' that can be used by the system running
on the BMC to signal the host of such an event.
The device name defaults to '/dev/ipmi-bt-host'
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
[clg: - checkpatch fixes
- added a devicetree binding documentation
- replace 'bt_host' by 'bt_bmc' to reflect that the driver is
the BMC side of the IPMI BT interface
- renamed the device to 'ipmi-bt-host'
- introduced a temporary buffer to copy_{to,from}_user
- used platform_get_irq()
- moved the driver under drivers/char/ipmi/ but kept it as a misc
device
- changed the compatible cell to "aspeed,ast2400-bt-bmc"
]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[clg: - checkpatch --strict fixes
- removed the use of devm_iounmap, devm_kfree in cleanup paths
- introduced an atomic-t to limit opens to 1
- introduced a mutex to protect write/read operations]
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Pull i2c updates from Wolfram Sang:
"Here is the I2C pull request for 4.8:
- the core and i801 driver gained support for SMBus Host Notify
- core support for more than one address in DT
- i2c_add_adapter() has now better error messages. We can remove all
error messages from drivers calling it as a next step.
- bigger updates to rk3x driver to support rk3399 SoC
- the at24 eeprom driver got refactored and can now read special
variants with unique serials or fixed MAC addresses.
The rest is regular driver updates and bugfixes"
* 'i2c/for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (66 commits)
i2c: i801: use IS_ENABLED() instead of checking for built-in or module
Documentation: i2c: slave: give proper example for pm usage
Documentation: i2c: slave: describe buffer problems a bit better
i2c: bcm2835: Don't complain on -EPROBE_DEFER from getting our clock
i2c: i2c-smbus: drop useless stubs
i2c: efm32: fix a failure path in efm32_i2c_probe()
Revert "i2c: core: Cleanup I2C ACPI namespace"
Revert "i2c: core: Add function for finding the bus speed from ACPI"
i2c: Update the description of I2C_SMBUS
i2c: i2c-smbus: fix i2c_handle_smbus_host_notify documentation
eeprom: at24: tweak the loop_until_timeout() macro
eeprom: at24: add support for at24mac series
eeprom: at24: support reading the serial number for 24csxx
eeprom: at24: platform_data: use BIT() macro
eeprom: at24: split at24_eeprom_write() into specialized functions
eeprom: at24: split at24_eeprom_read() into specialized functions
eeprom: at24: hide the read/write loop behind a macro
eeprom: at24: call read/write functions via function pointers
eeprom: at24: coding style fixes
eeprom: at24: move at24_read() below at24_eeprom_write()
...
Parameter trydefaults=1 causes the ipmi_init to initialize ipmi through
the legacy port io space that was designated for ipmi. Architectures
that do not map legacy port io can panic when trydefaults=1.
Rather than implement build-time conditional exceptions for each
architecture that does not map legacy port io, we have removed legacy
port io from the driver.
Parameter 'trydefaults' has been removed. Attempts to use it hereafter
will evoke the "Unknown symbol in module, or unknown parameter" message.
The patch was built against a number of architectures and tested for
regressions and functionality on x86_64 and ARM64.
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Removed the config entry and the address source entry for default,
since neither were used any more.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
.alert() is meant to be generic, but there is currently no way
for the device driver to know which protocol generated the alert.
Add a parameter in .alert() to help the device driver to understand
what is given in data.
This patch is required to have the support of SMBus Host Notify protocol
through .alert().
Tested-by: Andrew Duggan <aduggan@synaptics.com>
For hwmon:
Acked-by: Guenter Roeck <linux@roeck-us.net>
For IPMI:
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Commit 7ea0ed2b5b ("ipmi: Make the message handler easier to use for
SMI interfaces") changed handle_new_recv_msgs() to call handle_one_recv_msg()
for a smi_msg while the smi_msg is still connected to waiting_rcv_msgs list.
That could lead to following list corruption problems:
1) low-level function treats smi_msg as not connected to list
handle_one_recv_msg() could end up calling smi_send(), which
assumes the msg is not connected to list.
For example, the following sequence could corrupt list by
doing list_add_tail() for the entry still connected to other list.
handle_new_recv_msgs()
msg = list_entry(waiting_rcv_msgs)
handle_one_recv_msg(msg)
handle_ipmb_get_msg_cmd(msg)
smi_send(msg)
spin_lock(xmit_msgs_lock)
list_add_tail(msg)
spin_unlock(xmit_msgs_lock)
2) race between multiple handle_new_recv_msgs() instances
handle_new_recv_msgs() once releases waiting_rcv_msgs_lock before calling
handle_one_recv_msg() then retakes the lock and list_del() it.
If others call handle_new_recv_msgs() during the window shown below
list_del() will be done twice for the same smi_msg.
handle_new_recv_msgs()
spin_lock(waiting_rcv_msgs_lock)
msg = list_entry(waiting_rcv_msgs)
spin_unlock(waiting_rcv_msgs_lock)
|
| handle_one_recv_msg(msg)
|
spin_lock(waiting_rcv_msgs_lock)
list_del(msg)
spin_unlock(waiting_rcv_msgs_lock)
Fixes: 7ea0ed2b5b ("ipmi: Make the message handler easier to use for SMI interfaces")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
[Added a comment to describe why this works.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 3.19
Tested-by: Ye Feng <yefeng.yl@alibaba-inc.com>
Unlike everywhere else in the IPMI specification, the I2C address
specified in the SPMI table is not shifted to the left one bit with
the LSB zero. Instead it is not shifted with the MSB zero.
Reported-by: Sanjeev <singhsan@codeaurora.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Commit d61a3ead26 ("[PATCH] IPMI: reserve I/O ports separately")
changed the way I/O ports were reserved and includes this comment in
log:
Some BIOSes reserve disjoint I/O regions in their ACPI tables for the IPMI
controller. This causes problems when trying to register the entire I/O
region. Therefore we must register each I/O port separately.
There is a similar problem with memio regions on an arm64 platform
(AMD Seattle). Where I see:
ipmi message handler version 39.2
ipmi_si AMDI0300:00: probing via device tree
ipmi_si AMDI0300:00: ipmi_si: probing via ACPI
ipmi_si AMDI0300:00: [mem 0xe0010000] regsize 1 spacing 4 irq 23
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: Trying ACPI-specified kcs state machine at mem \
address 0xe0010000, slave address 0x0, irq 23
ipmi_si: Could not set up I/O space
The problem is that the ACPI core registers disjoint regions for the
platform device:
e0010000-e0010000 : AMDI0300:00
e0010004-e0010004 : AMDI0300:00
and the ipmi_si driver tries to register one region e0010000-e0010004.
Based on a patch from Mark Salter <msalter@redhat.com>, who also wrote
all the above text.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Mark Salter <msalter@redhat.com>
Commit 1717f2096b ("panic, x86: Fix re-entrance problem due to panic
on NMI") introduced nmi_panic() which prevents concurrent and recursive
execution of panic(). It also saves registers for the crash dump on x86
by later commit 58c5661f21 ("panic, x86: Allow CPUs to save registers
even if looping in NMI context").
ipmi_watchdog driver can call panic() from NMI handler, so replace it
with nmi_panic().
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Extend the tryacpi module parameter to turn off acpi_ipmi_probe such
that hard-coded options (type, ports, address, etc.) have complete
control over the smi_info data structures setup by the driver.
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Under some circumstances, the IPMI state machine could return
a call without delay option but the driver would still do a long
delay because the result wasn't checked. Instead of calling
the state machine after transaction done, just go back to the
top of the processing to start over.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Enclosing '#include <linux/acpi.h>' within '#ifdef CONFIG_ACPI' is
unnecessary, since it has its own conditional compile for CONFIG_ACPI.
Commit 0fbcf4af7c ("ipmi: Convert the IPMI SI ACPI handling to a
platform device") exposed this as a problem for platforms that do not
support ACPI when it introduced a call to ACPI_PTR() macro outside of
the CONFIG_ACPI conditional compile. This would have been perfectly
acceptable if acpi.h were not conditionally excluded for the non-acpi
platform, because the conditional compile within acpi.h defines
ACPI_PTR() to return NULL when compiled for non acpi platforms.
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Fixed commit reference in header to conform to standard.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
We call cleanup_one_si from ipmi_pci_remove, which calls ->addr_source_cleanup,
which gets set to point to ipmi_pci_cleanup, which does a pci_disable_device.
On return from this, we do a second pci_disable_device, which
results in the trace below.
ipmi_si 0000:00:16.0: disabling already-disabled device
Call Trace:
[<ffffffff818ce54c>] dump_stack+0x45/0x57
[<ffffffff810525f7>] warn_slowpath_common+0x97/0xe0
[<ffffffff810526f6>] warn_slowpath_fmt+0x46/0x50
[<ffffffff81497ca1>] pci_disable_device+0xb1/0xc0
[<ffffffffa00851a5>] ipmi_pci_remove+0x25/0x30 [ipmi_si]
[<ffffffff8149a696>] pci_device_remove+0x46/0xc0
[<ffffffff8156801f>] __device_release_driver+0x7f/0xf0
[<ffffffff81568978>] driver_detach+0xb8/0xc0
[<ffffffff81567e50>] bus_remove_driver+0x50/0xa0
[<ffffffff8156914e>] driver_unregister+0x2e/0x60
[<ffffffff8149a3e5>] pci_unregister_driver+0x25/0x90
[<ffffffffa0085804>] cleanup_ipmi_si+0xd4/0xf0 [ipmi_si]
[<ffffffff810c727a>] SyS_delete_module+0x12a/0x200
[<ffffffff818d4d72>] system_call_fastpath+0x12/0x17
Signed-off-by: Dave Jones <dsj@fb.com>
Lots of char arrays could be set as const since they contain only literal
char arrays.
We could in the same time make const some struct members who are pointer
to those const char arrays.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
We encountered a panic on boot in ipmi_si on a dell per320 due to an
uninitialized timer as follows.
static int smi_start_processing(void *send_info,
ipmi_smi_t intf)
{
/* Try to claim any interrupts. */
if (new_smi->irq_setup)
new_smi->irq_setup(new_smi);
--> IRQ arrives here and irq handler tries to modify uninitialized timer
which triggers BUG_ON(!timer->function) in __mod_timer().
Call Trace:
<IRQ>
[<ffffffffa0532617>] start_new_msg+0x47/0x80 [ipmi_si]
[<ffffffffa053269e>] start_check_enables+0x4e/0x60 [ipmi_si]
[<ffffffffa0532bd8>] smi_event_handler+0x1e8/0x640 [ipmi_si]
[<ffffffff810f5584>] ? __rcu_process_callbacks+0x54/0x350
[<ffffffffa053327c>] si_irq_handler+0x3c/0x60 [ipmi_si]
[<ffffffff810efaf0>] handle_IRQ_event+0x60/0x170
[<ffffffff810f245e>] handle_edge_irq+0xde/0x180
[<ffffffff8100fc59>] handle_irq+0x49/0xa0
[<ffffffff8154643c>] do_IRQ+0x6c/0xf0
[<ffffffff8100ba53>] ret_from_intr+0x0/0x11
/* Set up the timer that drives the interface. */
setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
The following patch fixes the problem.
To: Openipmi-developer@lists.sourceforge.net
To: Corey Minyard <minyard@acm.org>
CC: linux-kernel@vger.kernel.org
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # Applies cleanly to 3.10-, needs small rework before
Corey Minyard