With the right (or wrong;-) definition of v1 SMMU node in DTB it is
possible to trigger a division by zero in arm_smmu_init_domain_context
(if number of context irqs is 0):
if (smmu->version == 1) {
root_cfg->irptndx = atomic_inc_return(&smmu->irptndx);
=> root_cfg->irptndx %= smmu->num_context_irqs;
} else {
Avoid this by checking for num_context_irqs > 0 when probing
for SMMU devices.
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
[will: changed to dev_err on probe failure path]
Signed-off-by: Will Deacon <will.deacon@arm.com>
There is already a check to print a warning if the size of SMMU
address space (calculated from SMMU register values) is greater than
the size of the mapped memory region (e.g. passed via DT to the
driver).
Adapt this check to print also a warning in case the mapped region is
larger than the SMMU address space.
Such a mismatch could be intentional (to fix wrong register values).
If its not intentional (e.g. due to wrong DT information) this will
very likely cause a malfunction of the driver as SMMU_CB_BASE is
derived from the size of the mapped region. The warning helps to
identify the root cause in this case.
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This should ensure that arm-smmu is initialized before other drivers
start handling devices that propably need smmu support.
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Apart from fault handling and page table manipulation, we don't care
about memory ordering between SMMU control registers and normal,
cacheable memory, so use the _relaxed I/O accessors wherever possible.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Use devm_ioremap_resource instead of devm_request_and_ioremap.
This was partly done using the semantic patch
scripts/coccinelle/api/devm_ioremap_resource.cocci
The error-handling code on the call to platform_get_resource was removed
manually, and the initialization of smmu->size was manually moved lower, to
take advantage of the NULL test on res performed by devm_ioremap_resource.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We currently reset and enable the SMMU before the device has finished
being probed, so if we fail later on (for example, because we couldn't
request a global irq successfully) then we will leave the device in an
active state.
This patch delays the reset and enabling of the SMMU hardware until
probing has completed.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The extra semi-colon on the end breaks the test.
Cc: <stable@vger.kernel.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Unsigned char is never equal to -1.
Cc: <stable@vger.kernel.org>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We only use ASIDs and VMIDs to identify individual stage-1 and stage-2
context-banks respectively, so rather than allocate these separately
from the context-banks, just calculate them based on the context bank
index.
Note that VMIDs are offset by 1, since VMID 0 is reserved for stage-1.
This doesn't cause us any issues with the numberspaces, since the
maximum number of context banks is half the minimum number of VMIDs.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Although permitted by the architecture, using VMIDs for stage-1
translations causes a complete nightmare for hypervisors, who end up
having to virtualise the VMID space across VMs, which may be using
multiple VMIDs each.
To make life easier for hypervisors (which might just decide not to
support this VMID virtualisation), this patch reworks the stage-1
context-bank TLB invalidation so that:
- Stage-1 mappings are marked non-global in the ptes
- Each Stage-1 context-bank is assigned an ASID in TTBR0
- VMID 0 is reserved for Stage-1 context-banks
This allows the hypervisor to overwrite the Stage-1 VMID in the CBAR
when trapping the write from the guest.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
On systems which use a single, combined irq line for the SMMU, context
faults may result in us spuriously reporting global faults with zero
status registers.
This patch fixes up the fsr checks in both the context and global fault
interrupt handlers, so that we only report the fault if the fsr
indicates something did indeed go awry.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
The bottom word of the pgd should always be written to the low half of
the TTBR, so we don't need to swap anything for big-endian.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
This patch adds support for SMMUs implementing the ARM System MMU
architecture versions 1 or 2. Both arm and arm64 are supported, although
the v7s descriptor format is not used.
Cc: Rob Herring <robherring2@gmail.com>
Cc: Andreas Herrmann <andreas.herrmann@calxeda.com>
Cc: Olav Haugan <ohaugan@codeaurora.org>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Andreas Herrmann