This is a fairly minimal fixup to the horribly bad behavior of hash_64()
with certain input patterns.
In particular, because the multiplicative value used for the 64-bit hash
was intentionally bit-sparse (so that the multiply could be done with
shifts and adds on architectures without hardware multipliers), some
bits did not get spread out very much. In particular, certain fairly
common bit ranges in the input (roughly bits 12-20: commonly with the
most information in them when you hash things like byte offsets in files
or memory that have block factors that mean that the low bits are often
zero) would not necessarily show up much in the result.
There's a bigger patch-series brewing to fix up things more completely,
but this is the fairly minimal fix for the 64-bit hashing problem. It
simply picks a much better constant multiplier, spreading the bits out a
lot better.
NOTE! For 32-bit architectures, the bad old hash_64() remains the same
for now, since 64-bit multiplies are expensive. The bigger hashing
cleanup will replace the 32-bit case with something better.
The new constants were picked by George Spelvin who wrote that bigger
cleanup series. I just picked out the constants and part of the comment
from that series.
Cc: stable@vger.kernel.org
Cc: George Spelvin <linux@horizon.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull MD fixes from Shaohua Li:
"This update includes several trival fixes. The only important one is
to fix MD bio merge, which has big performance impact"
* tag 'md/4.6-rc6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
raid5: delete unnecessary warnning
MD: make bio mergeable
md/raid0: remove empty line printk from dump_zones
md/raid0: fix uninitialized variable bug
Linux 4.5 introduced a behavioral change in device probing during the
suspend process with commit 013c074f86 ("PM / sleep: prohibit devices
probing during suspend/hibernation"): It defers device probing during the
entire suspend process, starting from the prepare phase and ending with the
complete phase. A rule existed before that "we rely on subsystems not to
do any probing once a device is suspended" but it is enforced only now
(Alan Stern, https://lkml.org/lkml/2015/9/15/908).
This resulted in a WARN splat if a PCI device (e.g., Thunderbolt) is
plugged in while the system is asleep: Upon waking up, pciehp_resume()
discovers new devices in the resume phase and immediately tries to bind
them to a driver. Since probing is now deferred, device_attach() returns
-EPROBE_DEFER, which provoked a WARN in pci_bus_add_device().
Linux 4.6-rc1 aggravates the situation with commit ab1a187bba ("PCI:
Check device_attach() return value always"): If device_attach() returns a
negative value, pci_bus_add_device() now removes the sysfs and procfs
entries for the device and pci_bus_add_devices() subsequently locks up with
a BUG. Even with the BUG fixed we're still in trouble because the device
remains on the deferred probing list even though its sysfs and procfs
entries are gone and its children won't be added.
Fix by not interpreting -EPROBE_DEFER as failure. The device will be
probed eventually (through device_unblock_probing() in dpm_complete()) and
there is proper locking in place to avoid races (e.g., if devices are
unplugged again und thus deleted from the system before deferred probing
happens, I have tested this). Also, those functions which dereference
dev->driver (e.g. pci_pm_*()) do contain proper NULL pointer checks. So it
seems safe to ignore -EPROBE_DEFER.
Fixes: ab1a187bba ("PCI: Check device_attach() return value always")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Previously when pci_bus_add_device() called device_attach() and it returned
a negative value, we emitted a WARN but carried on.
Commit ab1a187bba ("PCI: Check device_attach() return value always"),
introduced in Linux 4.6-rc1, changed this to unwind all steps preceding
device_attach() and to not set dev->is_added = 1.
The latter leads to a BUG if pci_bus_add_device() was called from
pci_bus_add_devices(). Fix by not recursing to a child bus if
device_attach() failed for the bridge leading to it.
This can be triggered by plugging in a PCI device (e.g. Thunderbolt) while
the system is asleep. The system locks up when woken because
device_attach() returns -EPROBE_DEFER.
Fixes: ab1a187bba ("PCI: Check device_attach() return value always")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull UDF fix from Jan Kara:
"A fix of a regression in UDF that got introduced in 4.6-rc1 by one of
the charset encoding fixes"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix conversion of 'dstring' fields to UTF8
- A serious ACPI fix targeted for stable: lookup strings
were being free:ed.
- Revert two patches from the RCAR driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXJwiIAAoJEEEQszewGV1zaAUP/jJMysIIi2lmM1A7vxmA2ofp
pkOaQQsvykVAAkgyIhtCGcUfaenDeWBdAB3DPIZGJgGK6Azsa+4LiqwHrJgKxXCE
nkEoMZhFn6p4i+EURIE1g5k/8BVIdYllzz9n6k7grjV7YBgL5bN2aNvKC6WeOkMh
1ATh4kBIgrRuZPXekb2xosEAgynJMO2fMLWrLNsbX2m7yTCfm/BSsm7/KyOBylPr
0YTxvhJztd530/K1CEWwqKLZ1wFjMPldvgRnoDObo7PeOhZ1hQxMOGCmDR5tKFGM
bkxA+r9XV/5suAjrPrMa+KS8Dz/jsMZ0dsgf1vPe1llOQKxlqJo4OYmjVj5jeOI9
R/qOwBhjmwb9MFDcfLPXJgr79VdI+wg7jdv3UlusKR0MaVugwhS+RugYnw/P0GrG
cuN3INWEwPYbBN3I81BMnCk6BGcRLyH+v9Nb7w99satZ0Cvee4k6qYrfla/iC2Yo
ZSFTqlZeql971Ae6MNW8juVc4WWESGKavNsMVyQqnUOLE8Fh3dRbsiYIFzBdF4dV
ASgMt9nCuicnjmX7U+Wi4XJVIWWWgBnkLfHdJxeqpoBvdjXhOy4f/sYUALR61gWK
/PcTdzDvaiv1sDkue6mC2Lv8GL9gluxznew1zUndtyY+OCADXvgHgZpM7rBrIKCw
UJlUF9lmCtOMmub32rVS
=x3jf
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are some late but important fixes for the v4.6 kernel series.
ACPI and RCAR, so two driver fixes (PM related) and a self-evident
string lookup fix for ACPI GPIOs:
- A serious ACPI fix targeted for stable: lookup strings were being
free'd.
- Revert two patches from the RCAR driver"
* tag 'gpio-v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib-acpi: Duplicate con_id string when adding it to the crs lookup list
Revert "gpio: rcar: Fine-grained Runtime PM support"
Revert "gpio: rcar: Add Runtime PM handling for interrupts"
Pull networking fixes from David Miller:
1) MODULE_FIRMWARE firmware string not correct for iwlwifi 8000 chips,
from Sara Sharon.
2) Fix SKB size checks in batman-adv stack on receive, from Sven
Eckelmann.
3) Leak fix on mac80211 interface add error paths, from Johannes Berg.
4) Cannot invoke napi_disable() with BH disabled in myri10ge driver,
fix from Stanislaw Gruszka.
5) Fix sign extension problem when computing feature masks in
net_gso_ok(), from Marcelo Ricardo Leitner.
6) lan78xx driver doesn't count packets and packet lengths in its
statistics properly, fix from Woojung Huh.
7) Fix the buffer allocation sizes in pegasus USB driver, from Petko
Manolov.
8) Fix refcount overflows in bpf, from Alexei Starovoitov.
9) Unified dst cache handling introduced a preempt warning in
ip_tunnel, fix by resetting rather then setting the cached route.
From Paolo Abeni.
10) Listener hash collision test fix in soreuseport, from Craig Gallak
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
gre: do not pull header in ICMP error processing
net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case
tipc: only process unicast on intended node
cxgb3: fix out of bounds read
net/smscx5xx: use the device tree for mac address
soreuseport: Fix TCP listener hash collision
net: l2tp: fix reversed udp6 checksum flags
ip_tunnel: fix preempt warning in ip tunnel creation/updating
samples/bpf: fix trace_output example
bpf: fix check_map_func_compatibility logic
bpf: fix refcnt overflow
drivers: net: cpsw: use of_phy_connect() in fixed-link case
dt: cpsw: phy-handle, phy_id, and fixed-link are mutually exclusive
drivers: net: cpsw: don't ignore phy-mode if phy-handle is used
drivers: net: cpsw: fix segfault in case of bad phy-handle
drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac config
MAINTAINERS: net: Change maintainer for GRETH 10/100/1G Ethernet MAC device driver
gre: reject GUE and FOU in collect metadata mode
pegasus: fixes reported packet length
pegasus: fixes URB buffer allocation size;
...
We've calculated @len to be the bytes we need for '/..' entries from
@kn_from to the common ancestor, and calculated @nlen to be the extra
bytes we need to get from the common ancestor to @kn_to. We use them
as such at the end. But in the loop copying the actual entries, we
overwrite @nlen. Use a temporary variable for that instead.
Without this, the return length, when the buffer is large enough, is
wrong. (When the buffer is NULL or too small, the returned value is
correct. The buffer contents are also correct.)
Interestingly, no callers of this function are affected by this as of
yet. However the upcoming cgroup_show_path() will be.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Pull sparc fixes from David Miller:
1) Fix panics with SR-IOV, from Babu Moger.
2) Wire up preadv2/pwritev2.
3) Allow proper auto-loading of VIO devices, from John Paul Adrian
Glaubitz.
4) Recognize Sonoma cpus, from Khalid Aziz.
5) Fix bootup regressions caused by syscall trace fixes made recently.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix bootup regressions on some Kconfig combinations.
sparc64: recognize and support Sonoma CPU type
sparc: Implement and wire up vio_hotplug for vio.
sparc: Implement and wire up modalias_show for vio.
sparc/pci: Refactor dev_archdata initialization into pci_init_dev_archdata
sparc/defconfigs: Remove CONFIG_IPV6_PRIVACY
sparc: Write up preadv2/pwritev2 syscalls.
sparc/PCI: Fix for panic while enabling SR-IOV
When transportation of the command completes successfully, it indicates
that the 'status' result is valid. Fix the missed checking and
translation of the status field at the end of acpi_nfit_ctl().
Otherwise, we fail to handle reported errors and assume commands
complete successfully.
Reported-by: Linda Knippers <linda.knippers@hpe.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This reverts commit e3345db850, which
broke system resume for a large class of devices.
Devices that after having been reset during resume need to be rebound
due to a missing reset_resume callback, are now left in a suspended
state. This specifically broke resume of common USB-serial devices,
which are now unusable after system suspend (until disconnected and
reconnected) when USB persist is enabled.
During resume, usb_resume_interface will set the needs_binding flag for
such interfaces, but unlike system resume, run-time resume does not
honour it.
Cc: stable <stable@vger.kernel.org> # 4.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the issue where the mxs_ocotp_read is reading
the ocotp in reg_size steps but decrements the remaining size
by 1. The number of iterations is thus four times higher,
overwriting the area behind the output buffer.
Fixes: c01e9a11ab ("nvmem: add driver for ocotp in i.MX23 and i.MX28")
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Stanislav Meduna <stano@meduna.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 0c426c472b ("[media] media: Always
keep a graph walk large enough around") changed
media_device_register_entity() function to take mdev->graph_mutex. This
causes deadlock in driver probe, which calls (indirectly) this function
with ->graph_mutex taken. This patch removes taking ->graph_mutex in
driver probe to avoid deadlock. Other drivers don't take ->graph_mutex
for entity registration, so this change should be safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Commit 0c426c472b ("[media] media: Always
keep a graph walk large enough around") changed
media_device_register_entity() function to take mdev->graph_mutex. This
causes deadlock in driver probe, which calls (indirectly) this function
with ->graph_mutex taken. This patch removes taking ->graph_mutex in
driver probe to avoid deadlock. Other drivers don't take ->graph_mutex
for entity registration, so this change should be safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Commit 41cfd64cf4 "Update frequencies of policy->cpus only from
->set_policy()" changed the way the intel_pstate driver's ->set_policy
callback updates the HWP (hardware-managed P-states) settings.
A side effect of it is that if those settings are modified on the
boot CPU during system suspend and wakeup, they will never be
restored during subsequent system resume.
To address this problem, allow cpufreq drivers that don't provide
->target or ->target_index callbacks to use ->suspend and ->resume
callbacks and add a ->resume callback to intel_pstate to restore
the HWP settings on the CPUs that belong to the given policy.
Fixes: 41cfd64cf4 "Update frequencies of policy->cpus only from ->set_policy()"
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
iptunnel_pull_header expects that IP header was already pulled; with this
expectation, it pulls the tunnel header. This is not true in gre_err.
Furthermore, ipv4_update_pmtu and ipv4_redirect expect that skb->data points
to the IP header.
We cannot pull the tunnel header in this path. It's just a matter of not
calling iptunnel_pull_header - we don't need any of its effects.
Fixes: bda7bb4634 ("gre: Allow multiple protocol listener for gre protocol.")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prior to commit d92cff89a0 ("net_dbg_ratelimited: turn into no-op
when !DEBUG") the implementation of net_dbg_ratelimited() was buggy
for both the DEBUG and CONFIG_DYNAMIC_DEBUG cases.
The bug was that net_ratelimit() was being called and, despite
returning true, nothing was being printed to the console. This
resulted in messages like the following -
"net_ratelimit: %d callbacks suppressed"
with no other output nearby.
After commit d92cff89a0 ("net_dbg_ratelimited: turn into no-op when
!DEBUG") the bug is fixed for the DEBUG case. However, there's no
output at all for CONFIG_DYNAMIC_DEBUG case.
This patch restores debug output (if enabled) for the
CONFIG_DYNAMIC_DEBUG case.
Add a definition of net_dbg_ratelimited() for the CONFIG_DYNAMIC_DEBUG
case. The implementation takes care to check that dynamic debugging is
enabled before calling net_ratelimit().
Fixes: d92cff89a0 ("net_dbg_ratelimited: turn into no-op when !DEBUG")
Signed-off-by: Tim Bingham <tbingham@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In create_zero_mask() we have:
addi %1,%2,-1
andc %1,%1,%2
popcntd %0,%1
using the "r" constraint for %2. r0 is a valid register in the "r" set,
but addi X,r0,X turns it into an li:
li r7,-1
andc r7,r7,r0
popcntd r4,r7
Fix this by using the "b" constraint, for which r0 is not a valid
register.
This was found with a kernel build using gcc trunk, narrowed down to
when -frename-registers was enabled at -O2. It is just luck however
that we aren't seeing this on older toolchains.
Thanks to Segher for working with me to find this issue.
Cc: stable@vger.kernel.org
Fixes: d0cebfa650 ("powerpc: word-at-a-time optimization for 64-bit Little Endian")
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We have observed complete lock up of broadcast-link transmission due to
unacknowledged packets never being removed from the 'transmq' queue. This
is traced to nodes having their ack field set beyond the sequence number
of packets that have actually been transmitted to them.
Consider an example where node 1 has sent 10 packets to node 2 on a
link and node 3 has sent 20 packets to node 2 on another link. We
see examples of an ack from node 2 destined for node 3 being treated as
an ack from node 2 at node 1. This leads to the ack on the node 1 to node
2 link being increased to 20 even though we have only sent 10 packets.
When node 1 does get around to sending further packets, none of the
packets with sequence numbers less than 21 are actually removed from the
transmq.
To resolve this we reinstate some code lost in commit d999297c3d ("tipc:
reduce locking scope during packet reception") which ensures that only
messages destined for the receiving node are processed by that node. This
prevents the sequence numbers from getting out of sync and resolves the
packet leakage, thereby resolving the broadcast-link transmission
lock-ups we observed.
While we are aware that this change only patches over a root problem that
we still haven't identified, this is a sanity test that it is always
legitimate to do. It will remain in the code even after we identify and
fix the real problem.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: John Thompson <john.thompson@alliedtelesis.co.nz>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An out of bounds read of 2 bytes was discovered in cxgb3 with KASAN.
t3_config_rss() expects both arrays it gets as parameters to have
terminators. setup_rss(), the caller, forgets to add a terminator to
one of the arrays. Thankfully the iteration in t3_config_rss() stops
anyway, but in the last iteration the check for the terminator
is an out of bounds read.
Add the missing terminator to rspq_map[].
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This takes the MAC address for smsc75xx/smsc95xx USB network devices
from a the device tree. This is required to get a usable persistent
address on the popular beagleboard, whose hardware designers
accidentally forgot that an ethernet device really requires an a
MAC address to be functional.
The Raspberry Pi also ships smsc9514 without a serial EEPROM, stores
the MAC address in ROM accessible via VC4 firmware.
The smsc75xx and smsc95xx drivers are just two copies of the
same code, so better fix both.
[lkundrak@v3.sk: updated to use of_get_property() as per suggestion from
Arnd, reworded the message and comments a bit]
Tested-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: David S. Miller <davem@davemloft.net>
I forgot to include a check for listener port equality when deciding
if two sockets should belong to the same reuseport group. This was
not caught previously because it's only necessary when two listening
sockets for the same user happen to hash to the same listener bucket.
The same error does not exist in the UDP path.
Fixes: c125e80b8868("soreuseport: fast reuseport TCP socket selection")
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a bug which causes the behavior of whether to ignore
udp6 checksum of udp6 encapsulated l2tp tunnel contrary to what
userspace program requests.
When the flag `L2TP_ATTR_UDP_ZERO_CSUM6_RX` is set by userspace, it is
expected that udp6 checksums of received packets of the l2tp tunnel
to create should be ignored. In `l2tp_netlink.c`:
`l2tp_nl_cmd_tunnel_create()`, `cfg.udp6_zero_rx_checksums` is set
according to the flag, and then passed to `l2tp_core.c`:
`l2tp_tunnel_create()` and then `l2tp_tunnel_sock_create()`. In
`l2tp_tunnel_sock_create()`, `udp_conf.use_udp6_rx_checksums` is set
the same to `cfg.udp6_zero_rx_checksums`. However, if we want the
checksum to be ignored, `udp_conf.use_udp6_rx_checksums` should be set
to `false`, i.e. be set to the contrary. Similarly, the same should be
done to `udp_conf.use_udp6_tx_checksums`.
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smatch complains that we might not initialize "queue". The issue is
callers like setup_vq() from virtio_pci_modern.c where "num" could be
something like 2 and "vring_align" is 64. In that case, vring_size() is
less than PAGE_SIZE. It won't happen in real life, but we're getting
the value of "num" from a register so it's not really possible to tell
what value it holds with static analysis.
Let's just silence the warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull thermal fixes from Eduardo Valentin:
"A couple of minor fixes for the thermal subsystem.
Specifics in this pull request:
- Fixes in hisilicon thermal driver
- More fixes of unsigned to int type change in thermal_core.c"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: use %d to print S32 parameters
thermal: hisilicon: increase temperature resolution
On the consumer side, we have interrupt driven flow management of the
producer. It is sufficient to base the signaling decision on the
amount of space that is available to write after the read is complete.
The current code samples the previous available space and uses this
in making the signaling decision. This state can be stale and is
unnecessary. Since the state can be stale, we end up not signaling
the host (when we should) and this can result in a hang. Fix this
problem by removing the unnecessary check. I would like to thank
Arseney Romanenko <arseneyr@microsoft.com> for pointing out this issue.
Also, issue a full memory barrier before making the signaling descision
to correctly deal with potential reordering of the write (read index)
followed by the read of pending_sz.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* if we have a hashed negative dentry and either CREAT|EXCL on
r/o filesystem, or CREAT|TRUNC on r/o filesystem, or CREAT|EXCL
with failing may_o_create(), we should fail with EROFS or the
error may_o_create() has returned, but not ENOENT. Which is what
the current code ends up returning.
* if we have CREAT|TRUNC hitting a regular file on a read-only
filesystem, we can't fail with EROFS here. At the very least,
not until we'd done follow_managed() - we might have a writable
file (or a device, for that matter) bound on top of that one.
Moreover, the code downstream will see that O_TRUNC and attempt
to grab the write access (*after* following possible mount), so
if we really should fail with EROFS, it will happen. No need
to do that inside atomic_open().
The real logics is much simpler than what the current code is
trying to do - if we decided to go for simple lookup, ended
up with a negative dentry *and* had create_error set, fail with
create_error. No matter whether we'd got that negative dentry
from lookup_real() or had found it in dcache.
Cc: stable@vger.kernel.org # v3.6+
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When configuring a pfn-device instance to allocate the memmap array it
needs to account for the fact that vmemmap_populate_hugepages()
allocates struct page blocks in HPAGE_SIZE chunks. We need to align the
reserved area size to 2MB otherwise arch_add_memory() runs out of memory
while establishing the memmap:
WARNING: CPU: 0 PID: 496 at arch/x86/mm/init_64.c:704 arch_add_memory+0xe7/0xf0
[..]
Call Trace:
[<ffffffff8148bdb3>] dump_stack+0x85/0xc2
[<ffffffff810a749b>] __warn+0xcb/0xf0
[<ffffffff810a75cd>] warn_slowpath_null+0x1d/0x20
[<ffffffff8106a497>] arch_add_memory+0xe7/0xf0
[<ffffffff811d2097>] devm_memremap_pages+0x287/0x450
[<ffffffff811d1ffa>] ? devm_memremap_pages+0x1ea/0x450
[<ffffffffa0000298>] __wrap_devm_memremap_pages+0x58/0x70 [nfit_test_iomap]
[<ffffffffa0047a58>] pmem_attach_disk+0x318/0x420 [nd_pmem]
[<ffffffffa0047bcf>] nd_pmem_probe+0x6f/0x90 [nd_pmem]
[<ffffffffa0009469>] nvdimm_bus_probe+0x69/0x110 [libnvdimm]
[..]
ndbus0: nd_pmem.probe(pfn3.0) = -12
nd_pmem: probe of pfn3.0 failed with error -12
libndctl: ndctl_pfn_enable: pfn3.0: failed to enable
Reported-by: Namratha Kothapalli <namratha.n.kothapalli@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The qla1280 driver sets the scsi_host_template's can_queue field to 0xfffff
which results in an allocation failure when allocating the block layer tags
for the driver's queues. This was introduced with the change for host wide
tags in commit 64d513ac31 - "scsi: use host wide tags by default".
Reduce can_queue to MAX_OUTSTANDING_COMMANDS (512) to solve the allocation
error.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: 64d513ac31 - "scsi: use host wide tags by default"
Cc: stable@vger.kernel.org # v4.4
Cc: Laura Abbott <labbott@redhat.com>
Cc: Michael Reed <mdr@sgi.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com>
It's possible to use "err" without initializing it. If it happens to be
a 2 which is SCSI_DH_RETRY then that could cause a bug. Bart Van Assche
pointed out that we should probably re-initialize it for every iteration
through the retry loop.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com>
- cxl: Keep IRQ mappings on context teardown from Michael Neuling
- cxl: Poll for outstanding IRQs when detaching a context from Michael Neuling
- Wire up preadv2 and pwritev2 syscalls from Rui Salvaterra
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4O+o
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A few more powerpc fixes for 4.6:
- cxl: Keep IRQ mappings on context teardown from Michael Neuling
- cxl: Poll for outstanding IRQs when detaching a context from
Michael Neuling
- Wire up preadv2 and pwritev2 syscalls from Rui Salvaterra"
* tag 'powerpc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: wire up preadv2 and pwritev2 syscalls
cxl: Poll for outstanding IRQs when detaching a context
cxl: Keep IRQ mappings on context teardown
- Revert cpufreq commit that attempted to fix a problem in the
ondemand/conservative governor code, but did that incorrectly
and introduced another problem instead (Rafael Wysocki).
- Fix incorrect decoding of MSR contents related to the
Turbo Activation Ratio (TAR) handling in the intel_pstate
driver (Srinivas Pandruvada).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ES0b
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"One revert of a recent cpufreq commit that introduced a regression and
a fix for intel_pstate's Turbo Activation Ratio handling code.
Specifics:
- Revert cpufreq commit that attempted to fix a problem in the
ondemand/conservative governor code, but did that incorrectly and
introduced another problem instead (Rafael Wysocki).
- Fix incorrect decoding of MSR contents related to the Turbo
Activation Ratio (TAR) handling in the intel_pstate driver
(Srinivas Pandruvada)"
* tag 'pm+acpi-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix processing for turbo activation ratio
Revert "cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC"
Pull drm fixes from Dave Airlie:
"A few fixes all over the place:
radeon is probably the biggest standout, it's a fix for screen
corruption or hung black outputs so I thought it was worth pulling in.
Otherwise some amdgpu power control fixes, some misc vmwgfx fixes, one
etnaviv fix, one virtio-gpu fix, two DP MST fixes, and a single TTM
fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Fix order of operation
drm/vmwgfx: use vmw_cmd_dx_cid_check for query commands.
drm/vmwgfx: Enable SVGA_3D_CMD_DX_SET_PREDICATION
drm/amdgpu: disable vm interrupts with vm_fault_stop=2
drm/amdgpu: print a message if ATPX dGPU power control is missing
Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control"
drm/radeon: fix vertical bars appear on monitor (v2)
drm/ttm: fix kref count mess in ttm_bo_move_to_lru_tail
drm/virtio: send vblank event after crtc updates
drm/dp/mst: Restore primary hub guid on resume
drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()
drm/etnaviv: don't move linear memory window on 3D cores without MC2.0
- A number of collected fixes for oopses, memory corruptions, deadlocks,
etc. All of these fixes are small (many only 5-10 lines), obvious,
and tested.
- Fix for the security issue related to the use of write for
bi-directional communications.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MFdC
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Final set of -rc fixes for 4.6.
I've collected up a number of patches that are all pretty small with
the exception of only a couple. The hfi1 driver has a number of
important patches, and it is what really drives the line count of this
pull request up. These are all small and I've got this kernel built
and running in the test lab (I have most of the hardware, I think nes
is the only thing in this patch set that I can't say I've personally
tested and have up and running).
Summary:
- A number of collected fixes for oopses, memory corruptions,
deadlocks, etc. All of these fixes are small (many only 5-10
lines), obvious, and tested.
- Fix for the security issue related to the use of write for
bi-directional communications"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
RDMA/nes: don't leak skb if carrier down
IB/security: Restrict use of the write() interface
IB/hfi1: Use kernel default llseek for ui device
IB/hfi1: Don't attempt to free resources if initialization failed
IB/hfi1: Fix missing lock/unlock in verbs drain callback
IB/rdmavt: Fix send scheduling
IB/hfi1: Prevent unpinning of wrong pages
IB/hfi1: Fix deadlock caused by locking with wrong scope
IB/hfi1: Prevent NULL pointer deferences in caching code
MAINTAINERS: Update iser/isert maintainer contact info
IB/mlx5: Expose correct max_sge_rd limit
RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chips
iw_cxgb4: handle draining an idle qp
iw_cxgb3: initialize ibdev.iwcm->ifname for port mapping
iw_cxgb4: initialize ibdev.iwcm->ifname for port mapping
IB/core: Don't drain non-existent rq queue-pair
IB/core: Fix oops in ib_cache_gid_set_default_gid
Here are some new device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Gyoi
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.6-rc6
Here are some new device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
If device has R5_LOCKED set, it's legit device has R5_SkipCopy set and page !=
orig_page. After R5_LOCKED is clear, handle_stripe_clean_event will clear the
SkipCopy flag and set page to orig_page. So the warning is unnecessary.
Reported-by: Joey Liao <joeyliao@qnap.com>
Signed-off-by: Shaohua Li <shli@fb.com>
A single regulator fix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C4f7
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Allwinner fixes for 4.6
A single regulator fix
* tag 'sunxi-fixes-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator
The davinci platform contains code that calls into the nvmem
subsystem, but that might be a loadable module, causing a
link error:
arch/arm/mach-davinci/built-in.o: In function `davinci_get_mac_addr':
:(.text+0x1088): undefined reference to `nvmem_device_read'
arch/arm/mach-davinci/built-in.o: In function `read_factory_config':
:(.text+0x214c): undefined reference to `nvmem_device_read'
Also, when NVMEM is completely disabled, the functions fail with
nonobvious error messages.
This ensures we only call the API functions when the code is actually
reachable from the board file, and otherwise prints a unique log
message.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: bec3c11bad ("misc: at24: replace memory_accessor with nvmem_device_read")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Merge fixes from Andrew Morton:
"20 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
Documentation/sysctl/vm.txt: update numa_zonelist_order description
lib/stackdepot.c: allow the stack trace hash to be zero
rapidio: fix potential NULL pointer dereference
mm/memory-failure: fix race with compound page split/merge
ocfs2/dlm: return zero if deref_done message is successfully handled
Ananth has moved
kcov: don't profile branches in kcov
kcov: don't trace the code coverage code
mm: wake kcompactd before kswapd's short sleep
.mailmap: add Frank Rowand
mm/hwpoison: fix wrong num_poisoned_pages accounting
mm: call swap_slot_free_notify() with page lock held
mm: vmscan: reclaim highmem zone if buffer_heads is over limit
numa: fix /proc/<pid>/numa_maps for THP
mm/huge_memory: replace VM_NO_THP VM_BUG_ON with actual VMA check
mailmap: fix Krzysztof Kozlowski's misspelled name
thp: keep huge zero page pinned until tlb flush
mm: exclude HugeTLB pages from THP page_mapped() logic
kexec: export OFFSET(page.compound_head) to find out compound tail page
kexec: update VMCOREINFO for compound_order/dtor
After the commit e09acddf87 ("ip_tunnel: replace dst_cache with generic
implementation"), a preemption debug warning is triggered on ip4
tunnels updating; the dst cache helper needs to be invoked in unpreemptible
context.
We don't need to load the cache on tunnel update, so this commit fixes
the warning replacing the load with a dst cache reset, which is
preempt safe.
Fixes: e09acddf87 ("ip_tunnel: replace dst_cache with generic implementation")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both of these drivers can return NOTIFY_BAD, but this terminates
processing other callbacks that were registered later on the chain.
Since the driver did nothing to log the error it seems wrong to prevent
other interested parties from seeing it. E.g. neither of them had even
bothered to check the type of the error to see if it was a memory error
before the return NOTIFY_BAD.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Workqueue maybe still in running while we destroy the IDLETIMER target,
thus cause a use after free error, add cancel_work_sync() to avoid such
situation.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* pm-cpufreq-fixes:
cpufreq: intel_pstate: Fix processing for turbo activation ratio
Revert "cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC"
The batadv_neigh_node was specific to a batadv_hardif_neigh_node and held
an implicit reference to it. But this reference was never stored in form of
a pointer in the batadv_neigh_node itself. Instead
batadv_neigh_node_release depends on a consistent state of
hard_iface->neigh_list and that batadv_hardif_neigh_get always returns the
batadv_hardif_neigh_node object which it has a reference for. But
batadv_hardif_neigh_get cannot guarantee that because it is working only
with rcu_read_lock on this list. It can therefore happen that a neigh_addr
is in this list twice or that batadv_hardif_neigh_get cannot find the
batadv_hardif_neigh_node for an neigh_addr due to some other list
operations taking place at the same time.
Instead add a batadv_hardif_neigh_node pointer directly in
batadv_neigh_node which will be used for the reference counter decremented
on release of batadv_neigh_node.
Fixes: cef63419f7 ("batman-adv: add list of unique single hop neighbors per hard-interface")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
The batadv_tt_local_entry was specific to a batadv_softif_vlan and held an
implicit reference to it. But this reference was never stored in form of a
pointer in the tt_local_entry itself. Instead batadv_tt_local_remove,
batadv_tt_local_table_free and batadv_tt_local_purge_pending_clients depend
on a consistent state of bat_priv->softif_vlan_list and that
batadv_softif_vlan_get always returns the batadv_softif_vlan object which
it has a reference for. But batadv_softif_vlan_get cannot guarantee that
because it is working only with rcu_read_lock on this list. It can
therefore happen that an vid is in this list twice or that
batadv_softif_vlan_get cannot find the batadv_softif_vlan for an vid due to
some other list operations taking place at the same time.
Instead add a batadv_softif_vlan pointer directly in batadv_tt_local_entry
which will be used for the reference counter decremented on release of
batadv_tt_local_entry.
Fixes: 35df3b298f ("batman-adv: fix TT VLAN inconsistency on VLAN re-add")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
At the moment there is no explicit reactivation of an hard-interface
upon NETDEV_UP event. In case of B.A.T.M.A.N. IV the interface is
reactivated as soon as the next OGM is scheduled for sending, but this
mechanism does not work with B.A.T.M.A.N. V. The latter does not rely
on the same scheduling mechanism as its predecessor and for this reason
the hard-interface remains deactivated forever after being brought down
once.
This patch fixes the reactivation mechanism by adding a new routing API
which explicitly allows each algorithm to perform any needed operation
upon interface re-activation.
Such API is optional and is implemented by B.A.T.M.A.N. V only and it
just takes care of setting the iface status to ACTIVE
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
