Also adds two lines missing from the previous patch (for the need reconnect flag in the
/proc/fs/cifs/DebugData handling)
The new global_cifs_sock_list is added, and initialized in init_cifs but not used yet.
Jeff Layton will be adding code in to use that and to remove the GlobalTcon and GlobalSMBSession
lists.
CC: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
In preparation for Jeff's big umount/mount fixes to remove the possibility of
various races in cifs mount and linked list handling of sessions, sockets and
tree connections, this patch cleans up some repetitive code in cifs_mount,
and addresses a problem with ses->status and tcon->tidStatus in which we
were overloading the "need_reconnect" state with other status in that
field. So the "need_reconnect" flag has been broken out from those
two state fields (need reconnect was not mutually exclusive from some of the
other possible tid and ses states). In addition, a few exit cases in
cifs_mount were cleaned up, and a problem with a tcon flag (for lease support)
was not being set consistently for the 2nd mount of the same share
CC: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
When retrying kernel_recvmsg, reset iov_base and iov_len.
Note comment from Sridhar: "In the normal path, iov.iov_len is clearly set to 4. But i think you are
running into a case where kernel_recvmsg() is called via 'goto incomplete_rcv'
It happens if the previous call fails with EAGAIN.
If you want to call recvmsg() after EAGAIN failure, you need to reset iov."
Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: fix renaming one hardlink on top of another
[CIFS] fix error in smb_send2
[CIFS] Reduce number of socket retries in large write path
cifs: fix renaming one hardlink on top of another
POSIX says that renaming one hardlink on top of another to the same
inode is a no-op. We had the logic mostly right, but forgot to clear
the return code.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.
So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set. And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux:
NLM: Set address family before calling nlm_host_rebooted()
nfsd: fix failure to set eof in readdir in some situations
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
delay capable() check in ext4_has_free_blocks()
merge ext4_claim_free_blocks & ext4_has_free_blocks
jbd2: Call the commit callback before the transaction could get dropped
ext4: fix a bug accessing freed memory in ext4_abort
ext3: fix a bug accessing freed memory in ext3_abort
The nlm_host_rebooted() function uses nlm_cmp_addr() to find an
nsm_handle that matches the rebooted peer. In order for this to work,
the passed-in address must have a proper address family.
This fixes a post-2.6.28 regression introduced by commit 781b61a6, which
added AF_INET6 support to nlm_cmp_addr(). Before that commit,
nlm_cmp_addr() didn't care about the address family; it compared only
the sin_addr.s_addr field for equality.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Before 14f7dd6320 "[PATCH] Copy XFS
readdir hack into nfsd code", readdir_cd->err was reset to eof before
each call to vfs_readdir; afterwards, it is set only once. Similarly,
c002a6c797 "[PATCH] Optimise NFS readdir
hack slightly", can cause us to exit without nfserr_eof set. Fix this.
This ensures the "eof" bit is set when needed in readdir replies. (The
particular case I saw was an nfsv4 readdir of an empty directory, which
returned with no entries (the protocol requires "." and ".." to be
filtered out), but with eof unset.)
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
smb_send2 exit logic was strange, and with the previous change
could cause us to fail large
smb writes when all of the smb was not sent as one chunk.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
SUNRPC: Fix potential race in put_rpccred()
SUNRPC: Fix rpcauth_prune_expired
NFS: Convert nfs_attr_generation_counter into an atomic_long
SUNRPC: Respond promptly to server TCP resets
Delete excess kernel-doc notation in fs/ subdirectory:
Warning(linux-2.6.27-git10//fs/jbd/transaction.c:886): Excess function parameter or struct member 'credits' description in 'journal_get_undo_access'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When ecryptfs allocates space to write crypto headers into, before copying
it out to file headers or to xattrs, it looks at the value of
crypt_stat->num_header_bytes_at_front to determine how much space it
needs. This is also used as the file offset to the actual encrypted data,
so for xattr-stored crypto info, the value was zero.
So, we kzalloc'd 0 bytes, and then ran off to write to that memory.
(Which returned as ZERO_SIZE_PTR, so we explode quickly).
The right answer is to always allocate a page to write into; the current
code won't ever write more than that (this is enforced by the
(PAGE_CACHE_SIZE - offset) length in the call to
ecryptfs_generate_key_packet_set). To be explicit about this, we now send
in a "max" parameter, rather than magically using PAGE_CACHE_SIZE there.
Also, since the pointer we pass down the callchain eventually gets the
virt_to_page() treatment, we should be using a alloc_page variant, not
kzalloc (see also 7fcba05437)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nothing uses prepare_write or commit_write. Remove them from the tree
completely.
[akpm@linux-foundation.org: schedule simple_prepare_write() for unexporting]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CIFS in some heavy stress conditions cifs could get EAGAIN
repeatedly in smb_send2 which led to repeated retries and eventually
failure of large writes which could lead to data corruption.
There are three changes that were suggested by various network
developers:
1) convert cifs from non-blocking to blocking tcp sendmsg
(we left in the retry on failure)
2) change cifs to not set sendbuf and rcvbuf size for the socket
(let tcp autotune the buffer sizes since that works much better
in the TCP stack now)
3) if we have a partial frame sent in smb_send2, mark the tcp
session as invalid (close the socket and reconnect) so we do
not corrupt the remaining part of the SMB with the beginning
of the next SMB.
This does not appear to hurt performance measurably and has
been run in various scenarios, but it definately removes
a corruption that we were seeing in some high stress
test cases.
Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The most important property we need from nfs_attr_generation_counter is
monotonicity, which is not guaranteed by the current system of smp memory
barriers. We should convert it to an atomic_long_t, and drop the memory
barriers.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
As reported by Eric Paris, the capable() check in ext4_has_free_blocks()
sometimes causes SELinux denials.
We can rearrange the logic so that we only try to use the root-reserved
blocks when necessary, and even then we can move the capable() test
to last, to avoid the check most of the time.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Mingming pointed out that ext4_claim_free_blocks & ext4_has_free_blocks
are largely cut & pasted; they can be collapsed/merged as follows.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The transaction can potentially get dropped if there are no buffers
that need to be written. Make sure we call the commit callback before
potentially deciding to drop the transaction. Also avoid
dereferencing the commit_transaction pointer in the marker for the
same reason.
This patch fixes the bug reported by Eric Paris at:
http://bugzilla.kernel.org/show_bug.cgi?id=11838
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Eric Sandeen <sandeen@redhat.com>
Tested-by: Eric Paris <eparis@redhat.com>
Vegard Nossum reported a bug which accesses freed memory (found via
kmemcheck). When journal has been aborted, ext4_put_super() calls
ext4_abort() after freeing the journal_t object, and then ext4_abort()
accesses it. This patch fix it.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Vegard Nossum reported a bug which accesses freed memory (found via
kmemcheck). When journal has been aborted, ext3_put_super() calls
ext3_abort() after freeing the journal_t object, and then ext3_abort()
accesses it. This patch fix it.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Turned out some VMware userspace does pread(2) on /proc/uptime, but
seqfiles currently don't allow pread() resulting in -ESPIPE.
Seqfiles in theory can do pread(), but this can be a long story,
so revert to ->read_proc until then.
http://bugzilla.kernel.org/show_bug.cgi?id=11856
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
In commit f337b9c583 ("epoll: drop
unnecessary test") Thomas found that there is an unnecessary (always
true) test in ep_send_events(). The callback never inserts into
->rdllink while the send loop is performed, and also does the
~EP_PRIVATE_BITS test. Given we're holding the mutex during this time,
the conditions tested inside the loop are always true.
HOWEVER.
The test "!ep_is_linked(&epi->rdllink)" wasn't there because we insert
into ->rdllink, but because the send-events loop might terminate before
the whole list is scanned (-EFAULT).
In such cases, when the loop terminates early, and when a (leftover)
file received an event while we're performing the lockless loop, we need
such test to avoid to double insert the epoll items. The list_splice()
done a few steps below, will correctly re-insert the ones that were left
on "txlist".
This should fix the kenrel.org bugzilla entry 11831.
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some userland apps seem to pass in a "0" for the seconds, and several
seconds worth of usecs to select(). The old kernels accepted this just
fine, so the new kernels must too.
However, due to the upscaling of the microseconds to nanoseconds we had
some cases where we got math overflow, and depending on the GCC version
(due to inlining decisions) that actually resulted in an -EINVAL return.
This patch fixes this by adding the excess microseconds to the seconds
field.
Also with thanks to Marcin Slusarz for spotting some implementation bugs
in the diagnostics patches.
Reported-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a regression caused by commit d0156417, "ext4: fix ext4_dx_readdir
hash collision handling", where deleting files in a large directory
(requiring more than one getdents system call), results in some
filenames being returned twice. This was caused by a failure to
update info->curr_hash and info->curr_minor_hash, so that if the
directory had gotten modified since the last getdents() system call
(as would be the case if the user is running "rm -r" or "git clean"),
a directory entry would get returned twice to the userspace.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch fixes the bug reported by Markus Trippelsdorf at:
http://bugzilla.kernel.org/show_bug.cgi?id=11844
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Fix a regression caused by commit 6a897cf4, "ext3: fix ext3_dx_readdir
hash collision handling", where deleting files in a large directory
(requiring more than one getdents system call), results in some
filenames being returned twice. This was caused by a failure to
update info->curr_hash and info->curr_minor_hash, so that if the
directory had gotten modified since the last getdents() system call
(as would be the case if the user is running "rm -r" or "git clean"),
a directory entry would get returned twice to the userspace.
This patch fixes the bug reported by Markus Trippelsdorf at:
http://bugzilla.kernel.org/show_bug.cgi?id=11844
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ All users removed in "switch all filesystems over to d_obtain_alias",
aka commit 440037287c ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This one was due to a merge error: we added a use of nd.path in commit
2d7c820e56 ("ext3: add checks for errors
from jbd"), and concurrently we got rid of 'nd' and used a naked 'path'
in commit 8264613def ("[PATCH] switch
quota_on-related stuff to kern_path()").
That all merged cleanly, but it didn't actually _work_. This should fix
it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'v28-range-hrtimers-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
hrtimers: add missing docbook comments to struct hrtimer
hrtimers: simplify hrtimer_peek_ahead_timers()
hrtimers: fix docbook comments
DECLARE_PER_CPU needs linux/percpu.h
hrtimers: fix typo
rangetimers: fix the bug reported by Ingo for real
rangetimer: fix BUG_ON reported by Ingo
rangetimer: fix x86 build failure for the !HRTIMERS case
select: fix alpha OSF wrapper
select: fix alpha OSF wrapper
hrtimer: peek at the timer queue just before going idle
hrtimer: make the futex() system call use the per process slack value
hrtimer: make the nanosleep() syscall use the per process slack
hrtimer: fix signed/unsigned bug in slack estimator
hrtimer: show the timer ranges in /proc/timer_list
hrtimer: incorporate feedback from Peter Zijlstra
hrtimer: add a hrtimer_start_range() function
hrtimer: another build fix
hrtimer: fix build bug found by Ingo
hrtimer: make select() and poll() use the hrtimer range feature
...
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: handle the TCP_Server_Info->tsk field more carefully
cifs: fix unlinking of rename target when server doesn't support open file renames
[CIFS] improve setlease handling
[CIFS] fix saving of resume key before CIFSFindNext
cifs: make cifs_rename handle -EACCES errors
[CIFS] fix build error
[CIFS] undo changes in cifs_rename_pending_delete if it errors out
cifs: track DeletePending flag in cifsInodeInfo
cifs: don't use CREATE_DELETE_ON_CLOSE in cifs_rename_pending_delete
[CIFS] eliminate usage of kthread_stop for cifsd
[CIFS] Add nodfs mount option
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: (66 commits)
[PATCH] kill the rest of struct file propagation in block ioctls
[PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET
[PATCH] get rid of blkdev_locked_ioctl()
[PATCH] get rid of blkdev_driver_ioctl()
[PATCH] sanitize blkdev_get() and friends
[PATCH] remember mode of reiserfs journal
[PATCH] propagate mode through swsusp_close()
[PATCH] propagate mode through open_bdev_excl/close_bdev_excl
[PATCH] pass fmode_t to blkdev_put()
[PATCH] kill the unused bsize on the send side of /dev/loop
[PATCH] trim file propagation in block/compat_ioctl.c
[PATCH] end of methods switch: remove the old ones
[PATCH] switch sr
[PATCH] switch sd
[PATCH] switch ide-scsi
[PATCH] switch tape_block
[PATCH] switch dcssblk
[PATCH] switch dasd
[PATCH] switch mtd_blkdevs
[PATCH] switch mmc
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
9p: fix sparse warnings
9p: rdma: RDMA Transport Support for 9P
9p: fix format warning
9p: fix debug build error
* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux:
nfsd: clean up expkey_parse error cases
nfsd: Drop reference in expkey_parse error cases
nfsd: Fix memory leak in nfsd_getxattr
NFSD: Fix BUG during NFSD shutdown processing
The __log_wait_for_space function sits in a loop checkpointing
transactions until there is sufficient space free in the journal.
However, if there are no transactions to be processed (e.g. because the
free space calculation is wrong due to a corrupted filesystem) it will
never progress.
Check for space being required when no transactions are outstanding and
abort the journal instead of endlessly looping.
This patch fixes the bug reported by Sami Liedes at:
http://bugzilla.kernel.org/show_bug.cgi?id=10976
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Tested-by: Sami Liedes <sliedes@cc.hut.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__try_to_free_cp_buf(), __process_buffer(), and __wait_cp_io() test
BH_Uptodate flag to detect write I/O errors on metadata buffers. But by
commit 95450f5a7e "ext3: don't read inode
block if the buffer has a write error"(*), BH_Uptodate flag can be set to
inode buffers with BH_Write_EIO in order to avoid reading old inode data.
So now, we have to test BH_Write_EIO flag of checkpointing inode buffers
instead of BH_Uptodate. This patch does it.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the journal has aborted due to a checkpointing failure, we have to
keep the contents of the journal space. Otherwise, the filesystem will
lose uncheckpointed metadata completely and become inconsistent. To
avoid this, we need to keep needs_recovery flag if checkpoint has
failed.
With this patch, ext3_put_super() detects a checkpointing failure from
the return value of journal_destroy(), then it invokes ext3_abort() to
make the filesystem read only and keep needs_recovery flag. Errors
from journal_flush() are also handled by this patch in some places.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a checkpointing IO fails, current JBD code doesn't check the error
and continue journaling. This means latest metadata can be lost from both
the journal and filesystem.
This patch leaves the failed metadata blocks in the journal space and
aborts journaling in the case of log_do_checkpoint(). To achieve this, we
need to do:
1. don't remove the failed buffer from the checkpoint list where in
the case of __try_to_free_cp_buf() because it may be released or
overwritten by a later transaction
2. log_do_checkpoint() is the last chance, remove the failed buffer
from the checkpoint list and abort the journal
3. when checkpointing fails, don't update the journal super block to
prevent the journaled contents from being cleaned. For safety,
don't update j_tail and j_tail_sequence either
4. when checkpointing fails, notify this error to the ext3 layer so
that ext3 don't clear the needs_recovery flag, otherwise the
journaled contents are ignored and cleaned in the recovery phase
5. if the recovery fails, keep the needs_recovery flag
6. prevent cleanup_journal_tail() from being called between
__journal_drop_transaction() and journal_abort() (a race issue
between journal_flush() and __log_wait_for_space()
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steve French