![Zhu Yi](/assets/img/avatar_default.png)
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
473 lines
16 KiB
Plaintext
473 lines
16 KiB
Plaintext
|
|
Intel(R) PRO/Wireless 2915ABG Driver for Linux in support of:
|
|
|
|
Intel(R) PRO/Wireless 2200BG Network Connection
|
|
Intel(R) PRO/Wireless 2915ABG Network Connection
|
|
|
|
Note: The Intel(R) PRO/Wireless 2915ABG Driver for Linux and Intel(R)
|
|
PRO/Wireless 2200BG Driver for Linux is a unified driver that works on
|
|
both hardware adapters listed above. In this document the Intel(R)
|
|
PRO/Wireless 2915ABG Driver for Linux will be used to reference the
|
|
unified driver.
|
|
|
|
Copyright (C) 2004-2006, Intel Corporation
|
|
|
|
README.ipw2200
|
|
|
|
Version: 1.0.8
|
|
Date : October 20, 2005
|
|
|
|
|
|
Index
|
|
-----------------------------------------------
|
|
0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER
|
|
1. Introduction
|
|
1.1. Overview of features
|
|
1.2. Module parameters
|
|
1.3. Wireless Extension Private Methods
|
|
1.4. Sysfs Helper Files
|
|
1.5. Supported channels
|
|
2. Ad-Hoc Networking
|
|
3. Interacting with Wireless Tools
|
|
3.1. iwconfig mode
|
|
3.2. iwconfig sens
|
|
4. About the Version Numbers
|
|
5. Firmware installation
|
|
6. Support
|
|
7. License
|
|
|
|
|
|
0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER
|
|
-----------------------------------------------
|
|
|
|
Important Notice FOR ALL USERS OR DISTRIBUTORS!!!!
|
|
|
|
Intel wireless LAN adapters are engineered, manufactured, tested, and
|
|
quality checked to ensure that they meet all necessary local and
|
|
governmental regulatory agency requirements for the regions that they
|
|
are designated and/or marked to ship into. Since wireless LANs are
|
|
generally unlicensed devices that share spectrum with radars,
|
|
satellites, and other licensed and unlicensed devices, it is sometimes
|
|
necessary to dynamically detect, avoid, and limit usage to avoid
|
|
interference with these devices. In many instances Intel is required to
|
|
provide test data to prove regional and local compliance to regional and
|
|
governmental regulations before certification or approval to use the
|
|
product is granted. Intel's wireless LAN's EEPROM, firmware, and
|
|
software driver are designed to carefully control parameters that affect
|
|
radio operation and to ensure electromagnetic compliance (EMC). These
|
|
parameters include, without limitation, RF power, spectrum usage,
|
|
channel scanning, and human exposure.
|
|
|
|
For these reasons Intel cannot permit any manipulation by third parties
|
|
of the software provided in binary format with the wireless WLAN
|
|
adapters (e.g., the EEPROM and firmware). Furthermore, if you use any
|
|
patches, utilities, or code with the Intel wireless LAN adapters that
|
|
have been manipulated by an unauthorized party (i.e., patches,
|
|
utilities, or code (including open source code modifications) which have
|
|
not been validated by Intel), (i) you will be solely responsible for
|
|
ensuring the regulatory compliance of the products, (ii) Intel will bear
|
|
no liability, under any theory of liability for any issues associated
|
|
with the modified products, including without limitation, claims under
|
|
the warranty and/or issues arising from regulatory non-compliance, and
|
|
(iii) Intel will not provide or be required to assist in providing
|
|
support to any third parties for such modified products.
|
|
|
|
Note: Many regulatory agencies consider Wireless LAN adapters to be
|
|
modules, and accordingly, condition system-level regulatory approval
|
|
upon receipt and review of test data documenting that the antennas and
|
|
system configuration do not cause the EMC and radio operation to be
|
|
non-compliant.
|
|
|
|
The drivers available for download from SourceForge are provided as a
|
|
part of a development project. Conformance to local regulatory
|
|
requirements is the responsibility of the individual developer. As
|
|
such, if you are interested in deploying or shipping a driver as part of
|
|
solution intended to be used for purposes other than development, please
|
|
obtain a tested driver from Intel Customer Support at:
|
|
|
|
http://support.intel.com/support/notebook/sb/CS-006408.htm
|
|
|
|
|
|
1. Introduction
|
|
-----------------------------------------------
|
|
The following sections attempt to provide a brief introduction to using
|
|
the Intel(R) PRO/Wireless 2915ABG Driver for Linux.
|
|
|
|
This document is not meant to be a comprehensive manual on
|
|
understanding or using wireless technologies, but should be sufficient
|
|
to get you moving without wires on Linux.
|
|
|
|
For information on building and installing the driver, see the INSTALL
|
|
file.
|
|
|
|
|
|
1.1. Overview of Features
|
|
-----------------------------------------------
|
|
The current release (1.0.8) supports the following features:
|
|
|
|
+ BSS mode (Infrastructure, Managed)
|
|
+ IBSS mode (Ad-Hoc)
|
|
+ WEP (OPEN and SHARED KEY mode)
|
|
+ 802.1x EAP via wpa_supplicant and xsupplicant
|
|
+ Wireless Extension support
|
|
+ Full B and G rate support (2200 and 2915)
|
|
+ Full A rate support (2915 only)
|
|
+ Transmit power control
|
|
+ S state support (ACPI suspend/resume)
|
|
|
|
The following features are currently enabled, but not officially
|
|
supported:
|
|
|
|
+ WPA
|
|
+ long/short preamble support
|
|
+ Monitor mode (aka RFMon)
|
|
|
|
The distinction between officially supported and enabled is a reflection
|
|
on the amount of validation and interoperability testing that has been
|
|
performed on a given feature.
|
|
|
|
|
|
|
|
1.2. Command Line Parameters
|
|
-----------------------------------------------
|
|
|
|
Like many modules used in the Linux kernel, the Intel(R) PRO/Wireless
|
|
2915ABG Driver for Linux allows configuration options to be provided
|
|
as module parameters. The most common way to specify a module parameter
|
|
is via the command line.
|
|
|
|
The general form is:
|
|
|
|
% modprobe ipw2200 parameter=value
|
|
|
|
Where the supported parameter are:
|
|
|
|
associate
|
|
Set to 0 to disable the auto scan-and-associate functionality of the
|
|
driver. If disabled, the driver will not attempt to scan
|
|
for and associate to a network until it has been configured with
|
|
one or more properties for the target network, for example configuring
|
|
the network SSID. Default is 1 (auto-associate)
|
|
|
|
Example: % modprobe ipw2200 associate=0
|
|
|
|
auto_create
|
|
Set to 0 to disable the auto creation of an Ad-Hoc network
|
|
matching the channel and network name parameters provided.
|
|
Default is 1.
|
|
|
|
channel
|
|
channel number for association. The normal method for setting
|
|
the channel would be to use the standard wireless tools
|
|
(i.e. `iwconfig eth1 channel 10`), but it is useful sometimes
|
|
to set this while debugging. Channel 0 means 'ANY'
|
|
|
|
debug
|
|
If using a debug build, this is used to control the amount of debug
|
|
info is logged. See the 'dvals' and 'load' script for more info on
|
|
how to use this (the dvals and load scripts are provided as part
|
|
of the ipw2200 development snapshot releases available from the
|
|
SourceForge project at http://ipw2200.sf.net)
|
|
|
|
led
|
|
Can be used to turn on experimental LED code.
|
|
0 = Off, 1 = On. Default is 0.
|
|
|
|
mode
|
|
Can be used to set the default mode of the adapter.
|
|
0 = Managed, 1 = Ad-Hoc, 2 = Monitor
|
|
|
|
|
|
1.3. Wireless Extension Private Methods
|
|
-----------------------------------------------
|
|
|
|
As an interface designed to handle generic hardware, there are certain
|
|
capabilities not exposed through the normal Wireless Tool interface. As
|
|
such, a provision is provided for a driver to declare custom, or
|
|
private, methods. The Intel(R) PRO/Wireless 2915ABG Driver for Linux
|
|
defines several of these to configure various settings.
|
|
|
|
The general form of using the private wireless methods is:
|
|
|
|
% iwpriv $IFNAME method parameters
|
|
|
|
Where $IFNAME is the interface name the device is registered with
|
|
(typically eth1, customized via one of the various network interface
|
|
name managers, such as ifrename)
|
|
|
|
The supported private methods are:
|
|
|
|
get_mode
|
|
Can be used to report out which IEEE mode the driver is
|
|
configured to support. Example:
|
|
|
|
% iwpriv eth1 get_mode
|
|
eth1 get_mode:802.11bg (6)
|
|
|
|
set_mode
|
|
Can be used to configure which IEEE mode the driver will
|
|
support.
|
|
|
|
Usage:
|
|
% iwpriv eth1 set_mode {mode}
|
|
Where {mode} is a number in the range 1-7:
|
|
1 802.11a (2915 only)
|
|
2 802.11b
|
|
3 802.11ab (2915 only)
|
|
4 802.11g
|
|
5 802.11ag (2915 only)
|
|
6 802.11bg
|
|
7 802.11abg (2915 only)
|
|
|
|
get_preamble
|
|
Can be used to report configuration of preamble length.
|
|
|
|
set_preamble
|
|
Can be used to set the configuration of preamble length:
|
|
|
|
Usage:
|
|
% iwpriv eth1 set_preamble {mode}
|
|
Where {mode} is one of:
|
|
1 Long preamble only
|
|
0 Auto (long or short based on connection)
|
|
|
|
|
|
1.4. Sysfs Helper Files:
|
|
-----------------------------------------------
|
|
|
|
The Linux kernel provides a pseudo file system that can be used to
|
|
access various components of the operating system. The Intel(R)
|
|
PRO/Wireless 2915ABG Driver for Linux exposes several configuration
|
|
parameters through this mechanism.
|
|
|
|
An entry in the sysfs can support reading and/or writing. You can
|
|
typically query the contents of a sysfs entry through the use of cat,
|
|
and can set the contents via echo. For example:
|
|
|
|
% cat /sys/bus/pci/drivers/ipw2200/debug_level
|
|
|
|
Will report the current debug level of the driver's logging subsystem
|
|
(only available if CONFIG_IPW_DEBUG was configured when the driver was
|
|
built).
|
|
|
|
You can set the debug level via:
|
|
|
|
% echo $VALUE > /sys/bus/pci/drivers/ipw2200/debug_level
|
|
|
|
Where $VALUE would be a number in the case of this sysfs entry. The
|
|
input to sysfs files does not have to be a number. For example, the
|
|
firmware loader used by hotplug utilizes sysfs entries for transfering
|
|
the firmware image from user space into the driver.
|
|
|
|
The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries
|
|
at two levels -- driver level, which apply to all instances of the driver
|
|
(in the event that there are more than one device installed) and device
|
|
level, which applies only to the single specific instance.
|
|
|
|
|
|
1.4.1 Driver Level Sysfs Helper Files
|
|
-----------------------------------------------
|
|
|
|
For the driver level files, look in /sys/bus/pci/drivers/ipw2200/
|
|
|
|
debug_level
|
|
|
|
This controls the same global as the 'debug' module parameter
|
|
|
|
|
|
|
|
1.4.2 Device Level Sysfs Helper Files
|
|
-----------------------------------------------
|
|
|
|
For the device level files, look in
|
|
|
|
/sys/bus/pci/drivers/ipw2200/{PCI-ID}/
|
|
|
|
For example:
|
|
/sys/bus/pci/drivers/ipw2200/0000:02:01.0
|
|
|
|
For the device level files, see /sys/bus/pci/drivers/ipw2200:
|
|
|
|
rf_kill
|
|
read -
|
|
0 = RF kill not enabled (radio on)
|
|
1 = SW based RF kill active (radio off)
|
|
2 = HW based RF kill active (radio off)
|
|
3 = Both HW and SW RF kill active (radio off)
|
|
write -
|
|
0 = If SW based RF kill active, turn the radio back on
|
|
1 = If radio is on, activate SW based RF kill
|
|
|
|
NOTE: If you enable the SW based RF kill and then toggle the HW
|
|
based RF kill from ON -> OFF -> ON, the radio will NOT come back on
|
|
|
|
ucode
|
|
read-only access to the ucode version number
|
|
|
|
led
|
|
read -
|
|
0 = LED code disabled
|
|
1 = LED code enabled
|
|
write -
|
|
0 = Disable LED code
|
|
1 = Enable LED code
|
|
|
|
NOTE: The LED code has been reported to hang some systems when
|
|
running ifconfig and is therefore disabled by default.
|
|
|
|
|
|
1.5. Supported channels
|
|
-----------------------------------------------
|
|
|
|
Upon loading the Intel(R) PRO/Wireless 2915ABG Driver for Linux, a
|
|
message stating the detected geography code and the number of 802.11
|
|
channels supported by the card will be displayed in the log.
|
|
|
|
The geography code corresponds to a regulatory domain as shown in the
|
|
table below.
|
|
|
|
Supported channels
|
|
Code Geography 802.11bg 802.11a
|
|
|
|
--- Restricted 11 0
|
|
ZZF Custom US/Canada 11 8
|
|
ZZD Rest of World 13 0
|
|
ZZA Custom USA & Europe & High 11 13
|
|
ZZB Custom NA & Europe 11 13
|
|
ZZC Custom Japan 11 4
|
|
ZZM Custom 11 0
|
|
ZZE Europe 13 19
|
|
ZZJ Custom Japan 14 4
|
|
ZZR Rest of World 14 0
|
|
ZZH High Band 13 4
|
|
ZZG Custom Europe 13 4
|
|
ZZK Europe 13 24
|
|
ZZL Europe 11 13
|
|
|
|
|
|
2. Ad-Hoc Networking
|
|
-----------------------------------------------
|
|
|
|
When using a device in an Ad-Hoc network, it is useful to understand the
|
|
sequence and requirements for the driver to be able to create, join, or
|
|
merge networks.
|
|
|
|
The following attempts to provide enough information so that you can
|
|
have a consistent experience while using the driver as a member of an
|
|
Ad-Hoc network.
|
|
|
|
2.1. Joining an Ad-Hoc Network
|
|
-----------------------------------------------
|
|
|
|
The easiest way to get onto an Ad-Hoc network is to join one that
|
|
already exists.
|
|
|
|
2.2. Creating an Ad-Hoc Network
|
|
-----------------------------------------------
|
|
|
|
An Ad-Hoc networks is created using the syntax of the Wireless tool.
|
|
|
|
For Example:
|
|
iwconfig eth1 mode ad-hoc essid testing channel 2
|
|
|
|
2.3. Merging Ad-Hoc Networks
|
|
-----------------------------------------------
|
|
|
|
|
|
3. Interaction with Wireless Tools
|
|
-----------------------------------------------
|
|
|
|
3.1 iwconfig mode
|
|
-----------------------------------------------
|
|
|
|
When configuring the mode of the adapter, all run-time configured parameters
|
|
are reset to the value used when the module was loaded. This includes
|
|
channels, rates, ESSID, etc.
|
|
|
|
3.2 iwconfig sens
|
|
-----------------------------------------------
|
|
|
|
The 'iwconfig ethX sens XX' command will not set the signal sensitivity
|
|
threshold, as described in iwconfig documentation, but rather the number
|
|
of consecutive missed beacons that will trigger handover, i.e. roaming
|
|
to another access point. At the same time, it will set the disassociation
|
|
threshold to 3 times the given value.
|
|
|
|
|
|
4. About the Version Numbers
|
|
-----------------------------------------------
|
|
|
|
Due to the nature of open source development projects, there are
|
|
frequently changes being incorporated that have not gone through
|
|
a complete validation process. These changes are incorporated into
|
|
development snapshot releases.
|
|
|
|
Releases are numbered with a three level scheme:
|
|
|
|
major.minor.development
|
|
|
|
Any version where the 'development' portion is 0 (for example
|
|
1.0.0, 1.1.0, etc.) indicates a stable version that will be made
|
|
available for kernel inclusion.
|
|
|
|
Any version where the 'development' portion is not a 0 (for
|
|
example 1.0.1, 1.1.5, etc.) indicates a development version that is
|
|
being made available for testing and cutting edge users. The stability
|
|
and functionality of the development releases are not know. We make
|
|
efforts to try and keep all snapshots reasonably stable, but due to the
|
|
frequency of their release, and the desire to get those releases
|
|
available as quickly as possible, unknown anomalies should be expected.
|
|
|
|
The major version number will be incremented when significant changes
|
|
are made to the driver. Currently, there are no major changes planned.
|
|
|
|
5. Firmware installation
|
|
----------------------------------------------
|
|
|
|
The driver requires a firmware image, download it and extract the
|
|
files under /lib/firmware (or wherever your hotplug's firmware.agent
|
|
will look for firmware files)
|
|
|
|
The firmware can be downloaded from the following URL:
|
|
|
|
http://ipw2200.sf.net/
|
|
|
|
|
|
6. Support
|
|
-----------------------------------------------
|
|
|
|
For direct support of the 1.0.0 version, you can contact
|
|
http://supportmail.intel.com, or you can use the open source project
|
|
support.
|
|
|
|
For general information and support, go to:
|
|
|
|
http://ipw2200.sf.net/
|
|
|
|
|
|
7. License
|
|
-----------------------------------------------
|
|
|
|
Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms of the GNU General Public License version 2 as
|
|
published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope that it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
this program; if not, write to the Free Software Foundation, Inc., 59
|
|
Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
|
|
The full GNU General Public License is included in this distribution in the
|
|
file called LICENSE.
|
|
|
|
Contact Information:
|
|
James P. Ketrenos <ipw2100-admin@linux.intel.com>
|
|
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
|