![Steven King](/assets/img/avatar_default.png)
These changes based on work by Steven King <sfking@fdwdc.com> to support the i2c hardware modules on ColdFire SoC family devices. This is the per SoC hardware support. Contains a common platform device setup. Each of the SoC family members tends to have some minor local setup required to initialize the module. But all ColdFire family members use the same i2c hardware module. This i2c hardware module is the same as used in the Freescale iMX ARM based family of SoC devices. Steven's original patches were based on using a new and different i2c-coldfire.c driver. But this is not neccessary as we can use the existing Linux i2c-imx.c driver with no change required to it. And this patch is now based on using the existing i2c-imx driver. This patch only contains the ColdFire platform changes. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Angelo Dureghello <angelo@sysam.it>
152 lines
3.7 KiB
C
152 lines
3.7 KiB
C
/***************************************************************************/
|
|
|
|
/*
|
|
* m5249.c -- platform support for ColdFire 5249 based boards
|
|
*
|
|
* Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
|
|
*/
|
|
|
|
/***************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/param.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/platform_device.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#include <asm/mcfclk.h>
|
|
|
|
/***************************************************************************/
|
|
|
|
DEFINE_CLK(pll, "pll.0", MCF_CLK);
|
|
DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfi2c0, "imx1-i2c.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfi2c1, "imx1-i2c.1", MCF_BUSCLK);
|
|
|
|
struct clk *mcf_clks[] = {
|
|
&clk_pll,
|
|
&clk_sys,
|
|
&clk_mcftmr0,
|
|
&clk_mcftmr1,
|
|
&clk_mcfuart0,
|
|
&clk_mcfuart1,
|
|
&clk_mcfqspi0,
|
|
&clk_mcfi2c0,
|
|
&clk_mcfi2c1,
|
|
NULL
|
|
};
|
|
|
|
/***************************************************************************/
|
|
|
|
#ifdef CONFIG_M5249C3
|
|
|
|
static struct resource m5249_smc91x_resources[] = {
|
|
{
|
|
.start = 0xe0000300,
|
|
.end = 0xe0000300 + 0x100,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = MCF_IRQ_GPIO6,
|
|
.end = MCF_IRQ_GPIO6,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device m5249_smc91x = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(m5249_smc91x_resources),
|
|
.resource = m5249_smc91x_resources,
|
|
};
|
|
|
|
#endif /* CONFIG_M5249C3 */
|
|
|
|
static struct platform_device *m5249_devices[] __initdata = {
|
|
#ifdef CONFIG_M5249C3
|
|
&m5249_smc91x,
|
|
#endif
|
|
};
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m5249_qspi_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
|
|
/* QSPI irq setup */
|
|
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
|
|
MCFSIM_QSPIICR);
|
|
mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
|
|
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m5249_i2c_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_I2C_IMX)
|
|
u32 r;
|
|
|
|
/* first I2C controller uses regular irq setup */
|
|
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
|
|
MCFSIM_I2CICR);
|
|
mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
|
|
|
|
/* second I2C controller is completely different */
|
|
r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
|
|
r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
|
|
r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
|
|
writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
|
|
#endif /* CONFIG_I2C_IMX */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
#ifdef CONFIG_M5249C3
|
|
|
|
static void __init m5249_smc91x_init(void)
|
|
{
|
|
u32 gpio;
|
|
|
|
/* Set the GPIO line as interrupt source for smc91x device */
|
|
gpio = readl(MCFSIM2_GPIOINTENABLE);
|
|
writel(gpio | 0x40, MCFSIM2_GPIOINTENABLE);
|
|
|
|
gpio = readl(MCFINTC2_INTPRI5);
|
|
writel(gpio | 0x04000000, MCFINTC2_INTPRI5);
|
|
}
|
|
|
|
#endif /* CONFIG_M5249C3 */
|
|
|
|
/***************************************************************************/
|
|
|
|
void __init config_BSP(char *commandp, int size)
|
|
{
|
|
mach_sched_init = hw_timer_init;
|
|
|
|
#ifdef CONFIG_M5249C3
|
|
m5249_smc91x_init();
|
|
#endif
|
|
m5249_qspi_init();
|
|
m5249_i2c_init();
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static int __init init_BSP(void)
|
|
{
|
|
platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(init_BSP);
|
|
|
|
/***************************************************************************/
|