![Steven King](/assets/img/avatar_default.png)
These changes based on work by Steven King <sfking@fdwdc.com> to support the i2c hardware modules on ColdFire SoC family devices. This is the per SoC hardware support. Contains a common platform device setup. Each of the SoC family members tends to have some minor local setup required to initialize the module. But all ColdFire family members use the same i2c hardware module. This i2c hardware module is the same as used in the Freescale iMX ARM based family of SoC devices. Steven's original patches were based on using a new and different i2c-coldfire.c driver. But this is not neccessary as we can use the existing Linux i2c-imx.c driver with no change required to it. And this patch is now based on using the existing i2c-imx driver. This patch only contains the ColdFire platform changes. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Tested-by: Angelo Dureghello <angelo@sysam.it>
599 lines
16 KiB
C
599 lines
16 KiB
C
/***************************************************************************/
|
|
|
|
/*
|
|
* m53xx.c -- platform support for ColdFire 53xx based boards
|
|
*
|
|
* Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
|
|
* Copyright (C) 2000, Lineo (www.lineo.com)
|
|
* Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
|
|
* Copyright Freescale Semiconductor, Inc 2006
|
|
* Copyright (c) 2006, emlix, Sebastian Hess <shess@hessware.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
/***************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/param.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#include <asm/mcfuart.h>
|
|
#include <asm/mcfdma.h>
|
|
#include <asm/mcfwdebug.h>
|
|
#include <asm/mcfclk.h>
|
|
|
|
/***************************************************************************/
|
|
|
|
DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
|
|
DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
|
|
DEFINE_CLK(0, "edma", 17, MCF_CLK);
|
|
DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
|
|
DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
|
|
DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
|
|
DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
|
|
DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
|
|
DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
|
|
DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
|
|
|
|
DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfpit.2", 34, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfpit.3", 35, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfpwm.0", 36, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfeport.0", 37, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfwdt.0", 38, MCF_CLK);
|
|
DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "mcfrtc.0", 42, MCF_CLK);
|
|
DEFINE_CLK(0, "mcflcd.0", 43, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfusb-otg.0", 44, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfusb-host.0", 45, MCF_CLK);
|
|
DEFINE_CLK(0, "sdram.0", 46, MCF_CLK);
|
|
DEFINE_CLK(0, "ssi.0", 47, MCF_CLK);
|
|
DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
|
|
|
|
DEFINE_CLK(1, "mdha.0", 32, MCF_CLK);
|
|
DEFINE_CLK(1, "skha.0", 33, MCF_CLK);
|
|
DEFINE_CLK(1, "rng.0", 34, MCF_CLK);
|
|
|
|
struct clk *mcf_clks[] = {
|
|
&__clk_0_2, /* flexbus */
|
|
&__clk_0_8, /* mcfcan.0 */
|
|
&__clk_0_12, /* fec.0 */
|
|
&__clk_0_17, /* edma */
|
|
&__clk_0_18, /* intc.0 */
|
|
&__clk_0_19, /* intc.1 */
|
|
&__clk_0_21, /* iack.0 */
|
|
&__clk_0_22, /* imx1-i2c.0 */
|
|
&__clk_0_23, /* mcfqspi.0 */
|
|
&__clk_0_24, /* mcfuart.0 */
|
|
&__clk_0_25, /* mcfuart.1 */
|
|
&__clk_0_26, /* mcfuart.2 */
|
|
&__clk_0_28, /* mcftmr.0 */
|
|
&__clk_0_29, /* mcftmr.1 */
|
|
&__clk_0_30, /* mcftmr.2 */
|
|
&__clk_0_31, /* mcftmr.3 */
|
|
|
|
&__clk_0_32, /* mcfpit.0 */
|
|
&__clk_0_33, /* mcfpit.1 */
|
|
&__clk_0_34, /* mcfpit.2 */
|
|
&__clk_0_35, /* mcfpit.3 */
|
|
&__clk_0_36, /* mcfpwm.0 */
|
|
&__clk_0_37, /* mcfeport.0 */
|
|
&__clk_0_38, /* mcfwdt.0 */
|
|
&__clk_0_40, /* sys.0 */
|
|
&__clk_0_41, /* gpio.0 */
|
|
&__clk_0_42, /* mcfrtc.0 */
|
|
&__clk_0_43, /* mcflcd.0 */
|
|
&__clk_0_44, /* mcfusb-otg.0 */
|
|
&__clk_0_45, /* mcfusb-host.0 */
|
|
&__clk_0_46, /* sdram.0 */
|
|
&__clk_0_47, /* ssi.0 */
|
|
&__clk_0_48, /* pll.0 */
|
|
|
|
&__clk_1_32, /* mdha.0 */
|
|
&__clk_1_33, /* skha.0 */
|
|
&__clk_1_34, /* rng.0 */
|
|
NULL,
|
|
};
|
|
|
|
static struct clk * const enable_clks[] __initconst = {
|
|
&__clk_0_2, /* flexbus */
|
|
&__clk_0_18, /* intc.0 */
|
|
&__clk_0_19, /* intc.1 */
|
|
&__clk_0_21, /* iack.0 */
|
|
&__clk_0_24, /* mcfuart.0 */
|
|
&__clk_0_25, /* mcfuart.1 */
|
|
&__clk_0_26, /* mcfuart.2 */
|
|
&__clk_0_28, /* mcftmr.0 */
|
|
&__clk_0_29, /* mcftmr.1 */
|
|
&__clk_0_32, /* mcfpit.0 */
|
|
&__clk_0_33, /* mcfpit.1 */
|
|
&__clk_0_37, /* mcfeport.0 */
|
|
&__clk_0_40, /* sys.0 */
|
|
&__clk_0_41, /* gpio.0 */
|
|
&__clk_0_46, /* sdram.0 */
|
|
&__clk_0_48, /* pll.0 */
|
|
};
|
|
|
|
static struct clk * const disable_clks[] __initconst = {
|
|
&__clk_0_8, /* mcfcan.0 */
|
|
&__clk_0_12, /* fec.0 */
|
|
&__clk_0_17, /* edma */
|
|
&__clk_0_22, /* imx1-i2c.0 */
|
|
&__clk_0_23, /* mcfqspi.0 */
|
|
&__clk_0_30, /* mcftmr.2 */
|
|
&__clk_0_31, /* mcftmr.3 */
|
|
&__clk_0_34, /* mcfpit.2 */
|
|
&__clk_0_35, /* mcfpit.3 */
|
|
&__clk_0_36, /* mcfpwm.0 */
|
|
&__clk_0_38, /* mcfwdt.0 */
|
|
&__clk_0_42, /* mcfrtc.0 */
|
|
&__clk_0_43, /* mcflcd.0 */
|
|
&__clk_0_44, /* mcfusb-otg.0 */
|
|
&__clk_0_45, /* mcfusb-host.0 */
|
|
&__clk_0_47, /* ssi.0 */
|
|
&__clk_1_32, /* mdha.0 */
|
|
&__clk_1_33, /* skha.0 */
|
|
&__clk_1_34, /* rng.0 */
|
|
};
|
|
|
|
|
|
static void __init m53xx_clk_init(void)
|
|
{
|
|
unsigned i;
|
|
|
|
/* make sure these clocks are enabled */
|
|
for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
|
|
__clk_init_enabled(enable_clks[i]);
|
|
/* make sure these clocks are disabled */
|
|
for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
|
|
__clk_init_disabled(disable_clks[i]);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m53xx_qspi_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
|
|
/* setup QSPS pins for QSPI with gpio CS control */
|
|
writew(0x01f0, MCFGPIO_PAR_QSPI);
|
|
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m53xx_i2c_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_I2C_IMX)
|
|
/* setup Port AS Pin Assignment Register for I2C */
|
|
/* set PASPA0 to SCL and PASPA1 to SDA */
|
|
u8 r = readb(MCFGPIO_PAR_FECI2C);
|
|
r |= 0x0f;
|
|
writeb(r, MCFGPIO_PAR_FECI2C);
|
|
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m53xx_uarts_init(void)
|
|
{
|
|
/* UART GPIO initialization */
|
|
writew(readw(MCFGPIO_PAR_UART) | 0x0FFF, MCFGPIO_PAR_UART);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m53xx_fec_init(void)
|
|
{
|
|
u8 v;
|
|
|
|
/* Set multi-function pins to ethernet mode for fec0 */
|
|
v = readb(MCFGPIO_PAR_FECI2C);
|
|
v |= MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
|
|
MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO;
|
|
writeb(v, MCFGPIO_PAR_FECI2C);
|
|
|
|
v = readb(MCFGPIO_PAR_FEC);
|
|
v = MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC | MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC;
|
|
writeb(v, MCFGPIO_PAR_FEC);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
void __init config_BSP(char *commandp, int size)
|
|
{
|
|
#if !defined(CONFIG_BOOTPARAM)
|
|
/* Copy command line from FLASH to local buffer... */
|
|
memcpy(commandp, (char *) 0x4000, 4);
|
|
if(strncmp(commandp, "kcl ", 4) == 0){
|
|
memcpy(commandp, (char *) 0x4004, size);
|
|
commandp[size-1] = 0;
|
|
} else {
|
|
memset(commandp, 0, size);
|
|
}
|
|
#endif
|
|
mach_sched_init = hw_timer_init;
|
|
m53xx_clk_init();
|
|
m53xx_uarts_init();
|
|
m53xx_fec_init();
|
|
m53xx_qspi_init();
|
|
m53xx_i2c_init();
|
|
|
|
#ifdef CONFIG_BDM_DISABLE
|
|
/*
|
|
* Disable the BDM clocking. This also turns off most of the rest of
|
|
* the BDM device. This is good for EMC reasons. This option is not
|
|
* incompatible with the memory protection option.
|
|
*/
|
|
wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
|
|
#endif
|
|
}
|
|
|
|
/***************************************************************************/
|
|
/* Board initialization */
|
|
/***************************************************************************/
|
|
/*
|
|
* PLL min/max specifications
|
|
*/
|
|
#define MAX_FVCO 500000 /* KHz */
|
|
#define MAX_FSYS 80000 /* KHz */
|
|
#define MIN_FSYS 58333 /* KHz */
|
|
#define FREF 16000 /* KHz */
|
|
|
|
|
|
#define MAX_MFD 135 /* Multiplier */
|
|
#define MIN_MFD 88 /* Multiplier */
|
|
#define BUSDIV 6 /* Divider */
|
|
|
|
/*
|
|
* Low Power Divider specifications
|
|
*/
|
|
#define MIN_LPD (1 << 0) /* Divider (not encoded) */
|
|
#define MAX_LPD (1 << 15) /* Divider (not encoded) */
|
|
#define DEFAULT_LPD (1 << 1) /* Divider (not encoded) */
|
|
|
|
#define SYS_CLK_KHZ 80000
|
|
#define SYSTEM_PERIOD 12.5
|
|
/*
|
|
* SDRAM Timing Parameters
|
|
*/
|
|
#define SDRAM_BL 8 /* # of beats in a burst */
|
|
#define SDRAM_TWR 2 /* in clocks */
|
|
#define SDRAM_CASL 2.5 /* CASL in clocks */
|
|
#define SDRAM_TRCD 2 /* in clocks */
|
|
#define SDRAM_TRP 2 /* in clocks */
|
|
#define SDRAM_TRFC 7 /* in clocks */
|
|
#define SDRAM_TREFI 7800 /* in ns */
|
|
|
|
#define EXT_SRAM_ADDRESS (0xC0000000)
|
|
#define FLASH_ADDRESS (0x00000000)
|
|
#define SDRAM_ADDRESS (0x40000000)
|
|
|
|
#define NAND_FLASH_ADDRESS (0xD0000000)
|
|
|
|
void wtm_init(void);
|
|
void scm_init(void);
|
|
void gpio_init(void);
|
|
void fbcs_init(void);
|
|
void sdramc_init(void);
|
|
int clock_pll (int fsys, int flags);
|
|
int clock_limp (int);
|
|
int clock_exit_limp (void);
|
|
int get_sys_clock (void);
|
|
|
|
asmlinkage void __init sysinit(void)
|
|
{
|
|
clock_pll(0, 0);
|
|
|
|
wtm_init();
|
|
scm_init();
|
|
gpio_init();
|
|
fbcs_init();
|
|
sdramc_init();
|
|
}
|
|
|
|
void wtm_init(void)
|
|
{
|
|
/* Disable watchdog timer */
|
|
writew(0, MCF_WTM_WCR);
|
|
}
|
|
|
|
#define MCF_SCM_BCR_GBW (0x00000100)
|
|
#define MCF_SCM_BCR_GBR (0x00000200)
|
|
|
|
void scm_init(void)
|
|
{
|
|
/* All masters are trusted */
|
|
writel(0x77777777, MCF_SCM_MPR);
|
|
|
|
/* Allow supervisor/user, read/write, and trusted/untrusted
|
|
access to all slaves */
|
|
writel(0, MCF_SCM_PACRA);
|
|
writel(0, MCF_SCM_PACRB);
|
|
writel(0, MCF_SCM_PACRC);
|
|
writel(0, MCF_SCM_PACRD);
|
|
writel(0, MCF_SCM_PACRE);
|
|
writel(0, MCF_SCM_PACRF);
|
|
|
|
/* Enable bursts */
|
|
writel(MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW, MCF_SCM_BCR);
|
|
}
|
|
|
|
|
|
void fbcs_init(void)
|
|
{
|
|
writeb(0x3E, MCFGPIO_PAR_CS);
|
|
|
|
/* Latch chip select */
|
|
writel(0x10080000, MCF_FBCS1_CSAR);
|
|
|
|
writel(0x002A3780, MCF_FBCS1_CSCR);
|
|
writel(MCF_FBCS_CSMR_BAM_2M | MCF_FBCS_CSMR_V, MCF_FBCS1_CSMR);
|
|
|
|
/* Initialize latch to drive signals to inactive states */
|
|
writew(0xffff, 0x10080000);
|
|
|
|
/* External SRAM */
|
|
writel(EXT_SRAM_ADDRESS, MCF_FBCS1_CSAR);
|
|
writel(MCF_FBCS_CSCR_PS_16 |
|
|
MCF_FBCS_CSCR_AA |
|
|
MCF_FBCS_CSCR_SBM |
|
|
MCF_FBCS_CSCR_WS(1),
|
|
MCF_FBCS1_CSCR);
|
|
writel(MCF_FBCS_CSMR_BAM_512K | MCF_FBCS_CSMR_V, MCF_FBCS1_CSMR);
|
|
|
|
/* Boot Flash connected to FBCS0 */
|
|
writel(FLASH_ADDRESS, MCF_FBCS0_CSAR);
|
|
writel(MCF_FBCS_CSCR_PS_16 |
|
|
MCF_FBCS_CSCR_BEM |
|
|
MCF_FBCS_CSCR_AA |
|
|
MCF_FBCS_CSCR_SBM |
|
|
MCF_FBCS_CSCR_WS(7),
|
|
MCF_FBCS0_CSCR);
|
|
writel(MCF_FBCS_CSMR_BAM_32M | MCF_FBCS_CSMR_V, MCF_FBCS0_CSMR);
|
|
}
|
|
|
|
void sdramc_init(void)
|
|
{
|
|
/*
|
|
* Check to see if the SDRAM has already been initialized
|
|
* by a run control tool
|
|
*/
|
|
if (!(readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)) {
|
|
/* SDRAM chip select initialization */
|
|
|
|
/* Initialize SDRAM chip select */
|
|
writel(MCF_SDRAMC_SDCS_BA(SDRAM_ADDRESS) |
|
|
MCF_SDRAMC_SDCS_CSSZ(MCF_SDRAMC_SDCS_CSSZ_32MBYTE),
|
|
MCF_SDRAMC_SDCS0);
|
|
|
|
/*
|
|
* Basic configuration and initialization
|
|
*/
|
|
writel(MCF_SDRAMC_SDCFG1_SRD2RW((int)((SDRAM_CASL + 2) + 0.5)) |
|
|
MCF_SDRAMC_SDCFG1_SWT2RD(SDRAM_TWR + 1) |
|
|
MCF_SDRAMC_SDCFG1_RDLAT((int)((SDRAM_CASL * 2) + 2)) |
|
|
MCF_SDRAMC_SDCFG1_ACT2RW((int)(SDRAM_TRCD + 0.5)) |
|
|
MCF_SDRAMC_SDCFG1_PRE2ACT((int)(SDRAM_TRP + 0.5)) |
|
|
MCF_SDRAMC_SDCFG1_REF2ACT((int)(SDRAM_TRFC + 0.5)) |
|
|
MCF_SDRAMC_SDCFG1_WTLAT(3),
|
|
MCF_SDRAMC_SDCFG1);
|
|
writel(MCF_SDRAMC_SDCFG2_BRD2PRE(SDRAM_BL / 2 + 1) |
|
|
MCF_SDRAMC_SDCFG2_BWT2RW(SDRAM_BL / 2 + SDRAM_TWR) |
|
|
MCF_SDRAMC_SDCFG2_BRD2WT((int)((SDRAM_CASL + SDRAM_BL / 2 - 1.0) + 0.5)) |
|
|
MCF_SDRAMC_SDCFG2_BL(SDRAM_BL - 1),
|
|
MCF_SDRAMC_SDCFG2);
|
|
|
|
|
|
/*
|
|
* Precharge and enable write to SDMR
|
|
*/
|
|
writel(MCF_SDRAMC_SDCR_MODE_EN |
|
|
MCF_SDRAMC_SDCR_CKE |
|
|
MCF_SDRAMC_SDCR_DDR |
|
|
MCF_SDRAMC_SDCR_MUX(1) |
|
|
MCF_SDRAMC_SDCR_RCNT((int)(((SDRAM_TREFI / (SYSTEM_PERIOD * 64)) - 1) + 0.5)) |
|
|
MCF_SDRAMC_SDCR_PS_16 |
|
|
MCF_SDRAMC_SDCR_IPALL,
|
|
MCF_SDRAMC_SDCR);
|
|
|
|
/*
|
|
* Write extended mode register
|
|
*/
|
|
writel(MCF_SDRAMC_SDMR_BNKAD_LEMR |
|
|
MCF_SDRAMC_SDMR_AD(0x0) |
|
|
MCF_SDRAMC_SDMR_CMD,
|
|
MCF_SDRAMC_SDMR);
|
|
|
|
/*
|
|
* Write mode register and reset DLL
|
|
*/
|
|
writel(MCF_SDRAMC_SDMR_BNKAD_LMR |
|
|
MCF_SDRAMC_SDMR_AD(0x163) |
|
|
MCF_SDRAMC_SDMR_CMD,
|
|
MCF_SDRAMC_SDMR);
|
|
|
|
/*
|
|
* Execute a PALL command
|
|
*/
|
|
writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IPALL, MCF_SDRAMC_SDCR);
|
|
|
|
/*
|
|
* Perform two REF cycles
|
|
*/
|
|
writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IREF, MCF_SDRAMC_SDCR);
|
|
writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IREF, MCF_SDRAMC_SDCR);
|
|
|
|
/*
|
|
* Write mode register and clear reset DLL
|
|
*/
|
|
writel(MCF_SDRAMC_SDMR_BNKAD_LMR |
|
|
MCF_SDRAMC_SDMR_AD(0x063) |
|
|
MCF_SDRAMC_SDMR_CMD,
|
|
MCF_SDRAMC_SDMR);
|
|
|
|
/*
|
|
* Enable auto refresh and lock SDMR
|
|
*/
|
|
writel(readl(MCF_SDRAMC_SDCR) & ~MCF_SDRAMC_SDCR_MODE_EN,
|
|
MCF_SDRAMC_SDCR);
|
|
writel(MCF_SDRAMC_SDCR_REF | MCF_SDRAMC_SDCR_DQS_OE(0xC),
|
|
MCF_SDRAMC_SDCR);
|
|
}
|
|
}
|
|
|
|
void gpio_init(void)
|
|
{
|
|
/* Enable UART0 pins */
|
|
writew(MCF_GPIO_PAR_UART_PAR_URXD0 | MCF_GPIO_PAR_UART_PAR_UTXD0,
|
|
MCFGPIO_PAR_UART);
|
|
|
|
/*
|
|
* Initialize TIN3 as a GPIO output to enable the write
|
|
* half of the latch.
|
|
*/
|
|
writeb(0x00, MCFGPIO_PAR_TIMER);
|
|
writeb(0x08, MCFGPIO_PDDR_TIMER);
|
|
writeb(0x00, MCFGPIO_PCLRR_TIMER);
|
|
}
|
|
|
|
int clock_pll(int fsys, int flags)
|
|
{
|
|
int fref, temp, fout, mfd;
|
|
u32 i;
|
|
|
|
fref = FREF;
|
|
|
|
if (fsys == 0) {
|
|
/* Return current PLL output */
|
|
mfd = readb(MCF_PLL_PFDR);
|
|
|
|
return (fref * mfd / (BUSDIV * 4));
|
|
}
|
|
|
|
/* Check bounds of requested system clock */
|
|
if (fsys > MAX_FSYS)
|
|
fsys = MAX_FSYS;
|
|
if (fsys < MIN_FSYS)
|
|
fsys = MIN_FSYS;
|
|
|
|
/* Multiplying by 100 when calculating the temp value,
|
|
and then dividing by 100 to calculate the mfd allows
|
|
for exact values without needing to include floating
|
|
point libraries. */
|
|
temp = 100 * fsys / fref;
|
|
mfd = 4 * BUSDIV * temp / 100;
|
|
|
|
/* Determine the output frequency for selected values */
|
|
fout = (fref * mfd / (BUSDIV * 4));
|
|
|
|
/*
|
|
* Check to see if the SDRAM has already been initialized.
|
|
* If it has then the SDRAM needs to be put into self refresh
|
|
* mode before reprogramming the PLL.
|
|
*/
|
|
if (readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)
|
|
/* Put SDRAM into self refresh mode */
|
|
writel(readl(MCF_SDRAMC_SDCR) & ~MCF_SDRAMC_SDCR_CKE,
|
|
MCF_SDRAMC_SDCR);
|
|
|
|
/*
|
|
* Initialize the PLL to generate the new system clock frequency.
|
|
* The device must be put into LIMP mode to reprogram the PLL.
|
|
*/
|
|
|
|
/* Enter LIMP mode */
|
|
clock_limp(DEFAULT_LPD);
|
|
|
|
/* Reprogram PLL for desired fsys */
|
|
writeb(MCF_PLL_PODR_CPUDIV(BUSDIV/3) | MCF_PLL_PODR_BUSDIV(BUSDIV),
|
|
MCF_PLL_PODR);
|
|
|
|
writeb(mfd, MCF_PLL_PFDR);
|
|
|
|
/* Exit LIMP mode */
|
|
clock_exit_limp();
|
|
|
|
/*
|
|
* Return the SDRAM to normal operation if it is in use.
|
|
*/
|
|
if (readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)
|
|
/* Exit self refresh mode */
|
|
writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_CKE,
|
|
MCF_SDRAMC_SDCR);
|
|
|
|
/* Errata - workaround for SDRAM opeartion after exiting LIMP mode */
|
|
writel(MCF_SDRAMC_REFRESH, MCF_SDRAMC_LIMP_FIX);
|
|
|
|
/* wait for DQS logic to relock */
|
|
for (i = 0; i < 0x200; i++)
|
|
;
|
|
|
|
return fout;
|
|
}
|
|
|
|
int clock_limp(int div)
|
|
{
|
|
u32 temp;
|
|
|
|
/* Check bounds of divider */
|
|
if (div < MIN_LPD)
|
|
div = MIN_LPD;
|
|
if (div > MAX_LPD)
|
|
div = MAX_LPD;
|
|
|
|
/* Save of the current value of the SSIDIV so we don't
|
|
overwrite the value*/
|
|
temp = readw(MCF_CCM_CDR) & MCF_CCM_CDR_SSIDIV(0xF);
|
|
|
|
/* Apply the divider to the system clock */
|
|
writew(MCF_CCM_CDR_LPDIV(div) | MCF_CCM_CDR_SSIDIV(temp), MCF_CCM_CDR);
|
|
|
|
writew(readw(MCF_CCM_MISCCR) | MCF_CCM_MISCCR_LIMP, MCF_CCM_MISCCR);
|
|
|
|
return (FREF/(3*(1 << div)));
|
|
}
|
|
|
|
int clock_exit_limp(void)
|
|
{
|
|
int fout;
|
|
|
|
/* Exit LIMP mode */
|
|
writew(readw(MCF_CCM_MISCCR) & ~MCF_CCM_MISCCR_LIMP, MCF_CCM_MISCCR);
|
|
|
|
/* Wait for PLL to lock */
|
|
while (!(readw(MCF_CCM_MISCCR) & MCF_CCM_MISCCR_PLL_LOCK))
|
|
;
|
|
|
|
fout = get_sys_clock();
|
|
|
|
return fout;
|
|
}
|
|
|
|
int get_sys_clock(void)
|
|
{
|
|
int divider;
|
|
|
|
/* Test to see if device is in LIMP mode */
|
|
if (readw(MCF_CCM_MISCCR) & MCF_CCM_MISCCR_LIMP) {
|
|
divider = readw(MCF_CCM_CDR) & MCF_CCM_CDR_LPDIV(0xF);
|
|
return (FREF/(2 << divider));
|
|
}
|
|
else
|
|
return (FREF * readb(MCF_PLL_PFDR)) / (BUSDIV * 4);
|
|
}
|