![Alan Cox](/assets/img/avatar_default.png)
This allows parallel scan and the like to be set without having to stop using the existing full helper functions. This patch merely adds the argument and fixes up the callers. It doesn't undo the special cases already in the tree or add any new parallel callers. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
215 lines
6.5 KiB
C
215 lines
6.5 KiB
C
/*
|
|
* ata_generic.c - Generic PATA/SATA controller driver.
|
|
* Copyright 2005 Red Hat Inc, all rights reserved.
|
|
*
|
|
* Elements from ide/pci/generic.c
|
|
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
|
|
* Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com>
|
|
*
|
|
* May be copied or modified under the terms of the GNU General Public License
|
|
*
|
|
* Driver for PCI IDE interfaces implementing the standard bus mastering
|
|
* interface functionality. This assumes the BIOS did the drive set up and
|
|
* tuning for us. By default we do not grab all IDE class devices as they
|
|
* may have other drivers or need fixups to avoid problems. Instead we keep
|
|
* a default list of stuff without documentation/driver that appears to
|
|
* work.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "ata_generic"
|
|
#define DRV_VERSION "0.2.15"
|
|
|
|
/*
|
|
* A generic parallel ATA driver using libata
|
|
*/
|
|
|
|
/**
|
|
* generic_set_mode - mode setting
|
|
* @link: link to set up
|
|
* @unused: returned device on error
|
|
*
|
|
* Use a non standard set_mode function. We don't want to be tuned.
|
|
* The BIOS configured everything. Our job is not to fiddle. We
|
|
* read the dma enabled bits from the PCI configuration of the device
|
|
* and respect them.
|
|
*/
|
|
|
|
static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
int dma_enabled = 0;
|
|
struct ata_device *dev;
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
|
|
/* Bits 5 and 6 indicate if DMA is active on master/slave */
|
|
if (ap->ioaddr.bmdma_addr)
|
|
dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
|
|
|
|
if (pdev->vendor == PCI_VENDOR_ID_CENATEK)
|
|
dma_enabled = 0xFF;
|
|
|
|
ata_for_each_dev(dev, link, ENABLED) {
|
|
/* We don't really care */
|
|
dev->pio_mode = XFER_PIO_0;
|
|
dev->dma_mode = XFER_MW_DMA_0;
|
|
/* We do need the right mode information for DMA or PIO
|
|
and this comes from the current configuration flags */
|
|
if (dma_enabled & (1 << (5 + dev->devno))) {
|
|
unsigned int xfer_mask = ata_id_xfermask(dev->id);
|
|
const char *name;
|
|
|
|
if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
|
|
name = ata_mode_string(xfer_mask);
|
|
else {
|
|
/* SWDMA perhaps? */
|
|
name = "DMA";
|
|
xfer_mask |= ata_xfer_mode2mask(XFER_MW_DMA_0);
|
|
}
|
|
|
|
ata_dev_printk(dev, KERN_INFO, "configured for %s\n",
|
|
name);
|
|
|
|
dev->xfer_mode = ata_xfer_mask2mode(xfer_mask);
|
|
dev->xfer_shift = ata_xfer_mode2shift(dev->xfer_mode);
|
|
dev->flags &= ~ATA_DFLAG_PIO;
|
|
} else {
|
|
ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
|
|
dev->xfer_mode = XFER_PIO_0;
|
|
dev->xfer_shift = ATA_SHIFT_PIO;
|
|
dev->flags |= ATA_DFLAG_PIO;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct scsi_host_template generic_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct ata_port_operations generic_port_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.cable_detect = ata_cable_unknown,
|
|
.set_mode = generic_set_mode,
|
|
};
|
|
|
|
static int all_generic_ide; /* Set to claim all devices */
|
|
|
|
/**
|
|
* ata_generic_init - attach generic IDE
|
|
* @dev: PCI device found
|
|
* @id: match entry
|
|
*
|
|
* Called each time a matching IDE interface is found. We check if the
|
|
* interface is one we wish to claim and if so we perform any chip
|
|
* specific hacks then let the ATA layer do the heavy lifting.
|
|
*/
|
|
|
|
static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
u16 command;
|
|
static const struct ata_port_info info = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA5,
|
|
.port_ops = &generic_port_ops
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, NULL };
|
|
|
|
/* Don't use the generic entry unless instructed to do so */
|
|
if (id->driver_data == 1 && all_generic_ide == 0)
|
|
return -ENODEV;
|
|
|
|
/* Devices that need care */
|
|
if (dev->vendor == PCI_VENDOR_ID_UMC &&
|
|
dev->device == PCI_DEVICE_ID_UMC_UM8886A &&
|
|
(!(PCI_FUNC(dev->devfn) & 1)))
|
|
return -ENODEV;
|
|
|
|
if (dev->vendor == PCI_VENDOR_ID_OPTI &&
|
|
dev->device == PCI_DEVICE_ID_OPTI_82C558 &&
|
|
(!(PCI_FUNC(dev->devfn) & 1)))
|
|
return -ENODEV;
|
|
|
|
/* Don't re-enable devices in generic mode or we will break some
|
|
motherboards with disabled and unused IDE controllers */
|
|
pci_read_config_word(dev, PCI_COMMAND, &command);
|
|
if (!(command & PCI_COMMAND_IO))
|
|
return -ENODEV;
|
|
|
|
if (dev->vendor == PCI_VENDOR_ID_AL)
|
|
ata_pci_bmdma_clear_simplex(dev);
|
|
|
|
if (dev->vendor == PCI_VENDOR_ID_ATI) {
|
|
int rc = pcim_enable_device(dev);
|
|
if (rc < 0)
|
|
return rc;
|
|
pcim_pin_device(dev);
|
|
}
|
|
return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL, 0);
|
|
}
|
|
|
|
static struct pci_device_id ata_generic[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), },
|
|
#if !defined(CONFIG_PATA_TOSHIBA) && !defined(CONFIG_PATA_TOSHIBA_MODULE)
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), },
|
|
#endif
|
|
/* Must come last. If you add entries adjust this table appropriately */
|
|
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
|
|
{ 0, },
|
|
};
|
|
|
|
static struct pci_driver ata_generic_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = ata_generic,
|
|
.probe = ata_generic_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init ata_generic_init(void)
|
|
{
|
|
return pci_register_driver(&ata_generic_pci_driver);
|
|
}
|
|
|
|
|
|
static void __exit ata_generic_exit(void)
|
|
{
|
|
pci_unregister_driver(&ata_generic_pci_driver);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for generic ATA");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, ata_generic);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(ata_generic_init);
|
|
module_exit(ata_generic_exit);
|
|
|
|
module_param(all_generic_ide, int, 0);
|