alistair23-linux/drivers/pci/htirq.c
Eric W. Biederman 8b955b0ddd [PATCH] Initial generic hypertransport interrupt support
This patch implements two functions ht_create_irq and ht_destroy_irq for
use by drivers.  Several other functions are implemented as helpers for
arch specific irq_chip handlers.

The driver for the card I tested this on isn't yet ready to be merged.
However this code is and hypertransport irqs are in use in a few other
places in the kernel.  Not that any of this will get merged before 2.6.19

Because the ipath-ht400 is slightly out of spec this code will need to be
generalized to work there.

I think all of the powerpc uses are for a plain interrupt controller in a
chipset so support for native hypertransport devices is a little less
interesting.

However I think this is a half way decent model on how to separate arch
specific and generic helper code, and I think this is a functional model of
how to get the architecture dependencies out of the msi code.

[akpm@osdl.org: Kconfig fix]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:29 -07:00

190 lines
4.5 KiB
C

/*
* File: htirq.c
* Purpose: Hypertransport Interrupt Capability
*
* Copyright (C) 2006 Linux Networx
* Copyright (C) Eric Biederman <ebiederman@lnxi.com>
*/
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/gfp.h>
/* Global ht irq lock.
*
* This is needed to serialize access to the data port in hypertransport
* irq capability.
*
* With multiple simultaneous hypertransport irq devices it might pay
* to make this more fine grained. But start with simple, stupid, and correct.
*/
static DEFINE_SPINLOCK(ht_irq_lock);
struct ht_irq_cfg {
struct pci_dev *dev;
unsigned pos;
unsigned idx;
};
void write_ht_irq_low(unsigned int irq, u32 data)
{
struct ht_irq_cfg *cfg = get_irq_data(irq);
unsigned long flags;
spin_lock_irqsave(&ht_irq_lock, flags);
pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
pci_write_config_dword(cfg->dev, cfg->pos + 4, data);
spin_unlock_irqrestore(&ht_irq_lock, flags);
}
void write_ht_irq_high(unsigned int irq, u32 data)
{
struct ht_irq_cfg *cfg = get_irq_data(irq);
unsigned long flags;
spin_lock_irqsave(&ht_irq_lock, flags);
pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1);
pci_write_config_dword(cfg->dev, cfg->pos + 4, data);
spin_unlock_irqrestore(&ht_irq_lock, flags);
}
u32 read_ht_irq_low(unsigned int irq)
{
struct ht_irq_cfg *cfg = get_irq_data(irq);
unsigned long flags;
u32 data;
spin_lock_irqsave(&ht_irq_lock, flags);
pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
pci_read_config_dword(cfg->dev, cfg->pos + 4, &data);
spin_unlock_irqrestore(&ht_irq_lock, flags);
return data;
}
u32 read_ht_irq_high(unsigned int irq)
{
struct ht_irq_cfg *cfg = get_irq_data(irq);
unsigned long flags;
u32 data;
spin_lock_irqsave(&ht_irq_lock, flags);
pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1);
pci_read_config_dword(cfg->dev, cfg->pos + 4, &data);
spin_unlock_irqrestore(&ht_irq_lock, flags);
return data;
}
void mask_ht_irq(unsigned int irq)
{
struct ht_irq_cfg *cfg;
unsigned long flags;
u32 data;
cfg = get_irq_data(irq);
spin_lock_irqsave(&ht_irq_lock, flags);
pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
pci_read_config_dword(cfg->dev, cfg->pos + 4, &data);
data |= 1;
pci_write_config_dword(cfg->dev, cfg->pos + 4, data);
spin_unlock_irqrestore(&ht_irq_lock, flags);
}
void unmask_ht_irq(unsigned int irq)
{
struct ht_irq_cfg *cfg;
unsigned long flags;
u32 data;
cfg = get_irq_data(irq);
spin_lock_irqsave(&ht_irq_lock, flags);
pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx);
pci_read_config_dword(cfg->dev, cfg->pos + 4, &data);
data &= ~1;
pci_write_config_dword(cfg->dev, cfg->pos + 4, data);
spin_unlock_irqrestore(&ht_irq_lock, flags);
}
/**
* ht_create_irq - create an irq and attach it to a device.
* @dev: The hypertransport device to find the irq capability on.
* @idx: Which of the possible irqs to attach to.
*
* ht_create_irq is needs to be called for all hypertransport devices
* that generate irqs.
*
* The irq number of the new irq or a negative error value is returned.
*/
int ht_create_irq(struct pci_dev *dev, int idx)
{
struct ht_irq_cfg *cfg;
unsigned long flags;
u32 data;
int max_irq;
int pos;
int irq;
pos = pci_find_capability(dev, PCI_CAP_ID_HT);
while (pos) {
u8 subtype;
pci_read_config_byte(dev, pos + 3, &subtype);
if (subtype == HT_CAPTYPE_IRQ)
break;
pos = pci_find_next_capability(dev, pos, PCI_CAP_ID_HT);
}
if (!pos)
return -EINVAL;
/* Verify the idx I want to use is in range */
spin_lock_irqsave(&ht_irq_lock, flags);
pci_write_config_byte(dev, pos + 2, 1);
pci_read_config_dword(dev, pos + 4, &data);
spin_unlock_irqrestore(&ht_irq_lock, flags);
max_irq = (data >> 16) & 0xff;
if ( idx > max_irq)
return -EINVAL;
cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
if (!cfg)
return -ENOMEM;
cfg->dev = dev;
cfg->pos = pos;
cfg->idx = 0x10 + (idx * 2);
irq = create_irq();
if (irq < 0) {
kfree(cfg);
return -EBUSY;
}
set_irq_data(irq, cfg);
if (arch_setup_ht_irq(irq, dev) < 0) {
ht_destroy_irq(irq);
return -EBUSY;
}
return irq;
}
/**
* ht_destroy_irq - destroy an irq created with ht_create_irq
*
* This reverses ht_create_irq removing the specified irq from
* existence. The irq should be free before this happens.
*/
void ht_destroy_irq(unsigned int irq)
{
struct ht_irq_cfg *cfg;
cfg = get_irq_data(irq);
set_irq_chip(irq, NULL);
set_irq_data(irq, NULL);
destroy_irq(irq);
kfree(cfg);
}
EXPORT_SYMBOL(ht_create_irq);
EXPORT_SYMBOL(ht_destroy_irq);