![Antti Palosaari](/assets/img/avatar_default.png)
Rename it device state variable to dev. Both priv and dev are very common terms for such variable in kernel, but I like use dev in order to keep drivers consistent. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
1234 lines
29 KiB
C
1234 lines
29 KiB
C
/*
|
|
* Realtek RTL2832 DVB-T demodulator driver
|
|
*
|
|
* Copyright (C) 2012 Thomas Mair <thomas.mair86@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*/
|
|
|
|
#include "rtl2832_priv.h"
|
|
#include "dvb_math.h"
|
|
#include <linux/bitops.h>
|
|
|
|
/* Max transfer size done by I2C transfer functions */
|
|
#define MAX_XFER_SIZE 64
|
|
#define REG_MASK(b) (BIT(b + 1) - 1)
|
|
|
|
static const struct rtl2832_reg_entry registers[] = {
|
|
[DVBT_SOFT_RST] = {0x1, 0x1, 2, 2},
|
|
[DVBT_IIC_REPEAT] = {0x1, 0x1, 3, 3},
|
|
[DVBT_TR_WAIT_MIN_8K] = {0x1, 0x88, 11, 2},
|
|
[DVBT_RSD_BER_FAIL_VAL] = {0x1, 0x8f, 15, 0},
|
|
[DVBT_EN_BK_TRK] = {0x1, 0xa6, 7, 7},
|
|
[DVBT_AD_EN_REG] = {0x0, 0x8, 7, 7},
|
|
[DVBT_AD_EN_REG1] = {0x0, 0x8, 6, 6},
|
|
[DVBT_EN_BBIN] = {0x1, 0xb1, 0, 0},
|
|
[DVBT_MGD_THD0] = {0x1, 0x95, 7, 0},
|
|
[DVBT_MGD_THD1] = {0x1, 0x96, 7, 0},
|
|
[DVBT_MGD_THD2] = {0x1, 0x97, 7, 0},
|
|
[DVBT_MGD_THD3] = {0x1, 0x98, 7, 0},
|
|
[DVBT_MGD_THD4] = {0x1, 0x99, 7, 0},
|
|
[DVBT_MGD_THD5] = {0x1, 0x9a, 7, 0},
|
|
[DVBT_MGD_THD6] = {0x1, 0x9b, 7, 0},
|
|
[DVBT_MGD_THD7] = {0x1, 0x9c, 7, 0},
|
|
[DVBT_EN_CACQ_NOTCH] = {0x1, 0x61, 4, 4},
|
|
[DVBT_AD_AV_REF] = {0x0, 0x9, 6, 0},
|
|
[DVBT_REG_PI] = {0x0, 0xa, 2, 0},
|
|
[DVBT_PIP_ON] = {0x0, 0x21, 3, 3},
|
|
[DVBT_SCALE1_B92] = {0x2, 0x92, 7, 0},
|
|
[DVBT_SCALE1_B93] = {0x2, 0x93, 7, 0},
|
|
[DVBT_SCALE1_BA7] = {0x2, 0xa7, 7, 0},
|
|
[DVBT_SCALE1_BA9] = {0x2, 0xa9, 7, 0},
|
|
[DVBT_SCALE1_BAA] = {0x2, 0xaa, 7, 0},
|
|
[DVBT_SCALE1_BAB] = {0x2, 0xab, 7, 0},
|
|
[DVBT_SCALE1_BAC] = {0x2, 0xac, 7, 0},
|
|
[DVBT_SCALE1_BB0] = {0x2, 0xb0, 7, 0},
|
|
[DVBT_SCALE1_BB1] = {0x2, 0xb1, 7, 0},
|
|
[DVBT_KB_P1] = {0x1, 0x64, 3, 1},
|
|
[DVBT_KB_P2] = {0x1, 0x64, 6, 4},
|
|
[DVBT_KB_P3] = {0x1, 0x65, 2, 0},
|
|
[DVBT_OPT_ADC_IQ] = {0x0, 0x6, 5, 4},
|
|
[DVBT_AD_AVI] = {0x0, 0x9, 1, 0},
|
|
[DVBT_AD_AVQ] = {0x0, 0x9, 3, 2},
|
|
[DVBT_K1_CR_STEP12] = {0x2, 0xad, 9, 4},
|
|
[DVBT_TRK_KS_P2] = {0x1, 0x6f, 2, 0},
|
|
[DVBT_TRK_KS_I2] = {0x1, 0x70, 5, 3},
|
|
[DVBT_TR_THD_SET2] = {0x1, 0x72, 3, 0},
|
|
[DVBT_TRK_KC_P2] = {0x1, 0x73, 5, 3},
|
|
[DVBT_TRK_KC_I2] = {0x1, 0x75, 2, 0},
|
|
[DVBT_CR_THD_SET2] = {0x1, 0x76, 7, 6},
|
|
[DVBT_PSET_IFFREQ] = {0x1, 0x19, 21, 0},
|
|
[DVBT_SPEC_INV] = {0x1, 0x15, 0, 0},
|
|
[DVBT_RSAMP_RATIO] = {0x1, 0x9f, 27, 2},
|
|
[DVBT_CFREQ_OFF_RATIO] = {0x1, 0x9d, 23, 4},
|
|
[DVBT_FSM_STAGE] = {0x3, 0x51, 6, 3},
|
|
[DVBT_RX_CONSTEL] = {0x3, 0x3c, 3, 2},
|
|
[DVBT_RX_HIER] = {0x3, 0x3c, 6, 4},
|
|
[DVBT_RX_C_RATE_LP] = {0x3, 0x3d, 2, 0},
|
|
[DVBT_RX_C_RATE_HP] = {0x3, 0x3d, 5, 3},
|
|
[DVBT_GI_IDX] = {0x3, 0x51, 1, 0},
|
|
[DVBT_FFT_MODE_IDX] = {0x3, 0x51, 2, 2},
|
|
[DVBT_RSD_BER_EST] = {0x3, 0x4e, 15, 0},
|
|
[DVBT_CE_EST_EVM] = {0x4, 0xc, 15, 0},
|
|
[DVBT_RF_AGC_VAL] = {0x3, 0x5b, 13, 0},
|
|
[DVBT_IF_AGC_VAL] = {0x3, 0x59, 13, 0},
|
|
[DVBT_DAGC_VAL] = {0x3, 0x5, 7, 0},
|
|
[DVBT_SFREQ_OFF] = {0x3, 0x18, 13, 0},
|
|
[DVBT_CFREQ_OFF] = {0x3, 0x5f, 17, 0},
|
|
[DVBT_POLAR_RF_AGC] = {0x0, 0xe, 1, 1},
|
|
[DVBT_POLAR_IF_AGC] = {0x0, 0xe, 0, 0},
|
|
[DVBT_AAGC_HOLD] = {0x1, 0x4, 5, 5},
|
|
[DVBT_EN_RF_AGC] = {0x1, 0x4, 6, 6},
|
|
[DVBT_EN_IF_AGC] = {0x1, 0x4, 7, 7},
|
|
[DVBT_IF_AGC_MIN] = {0x1, 0x8, 7, 0},
|
|
[DVBT_IF_AGC_MAX] = {0x1, 0x9, 7, 0},
|
|
[DVBT_RF_AGC_MIN] = {0x1, 0xa, 7, 0},
|
|
[DVBT_RF_AGC_MAX] = {0x1, 0xb, 7, 0},
|
|
[DVBT_IF_AGC_MAN] = {0x1, 0xc, 6, 6},
|
|
[DVBT_IF_AGC_MAN_VAL] = {0x1, 0xc, 13, 0},
|
|
[DVBT_RF_AGC_MAN] = {0x1, 0xe, 6, 6},
|
|
[DVBT_RF_AGC_MAN_VAL] = {0x1, 0xe, 13, 0},
|
|
[DVBT_DAGC_TRG_VAL] = {0x1, 0x12, 7, 0},
|
|
[DVBT_AGC_TARG_VAL_0] = {0x1, 0x2, 0, 0},
|
|
[DVBT_AGC_TARG_VAL_8_1] = {0x1, 0x3, 7, 0},
|
|
[DVBT_AAGC_LOOP_GAIN] = {0x1, 0xc7, 5, 1},
|
|
[DVBT_LOOP_GAIN2_3_0] = {0x1, 0x4, 4, 1},
|
|
[DVBT_LOOP_GAIN2_4] = {0x1, 0x5, 7, 7},
|
|
[DVBT_LOOP_GAIN3] = {0x1, 0xc8, 4, 0},
|
|
[DVBT_VTOP1] = {0x1, 0x6, 5, 0},
|
|
[DVBT_VTOP2] = {0x1, 0xc9, 5, 0},
|
|
[DVBT_VTOP3] = {0x1, 0xca, 5, 0},
|
|
[DVBT_KRF1] = {0x1, 0xcb, 7, 0},
|
|
[DVBT_KRF2] = {0x1, 0x7, 7, 0},
|
|
[DVBT_KRF3] = {0x1, 0xcd, 7, 0},
|
|
[DVBT_KRF4] = {0x1, 0xce, 7, 0},
|
|
[DVBT_EN_GI_PGA] = {0x1, 0xe5, 0, 0},
|
|
[DVBT_THD_LOCK_UP] = {0x1, 0xd9, 8, 0},
|
|
[DVBT_THD_LOCK_DW] = {0x1, 0xdb, 8, 0},
|
|
[DVBT_THD_UP1] = {0x1, 0xdd, 7, 0},
|
|
[DVBT_THD_DW1] = {0x1, 0xde, 7, 0},
|
|
[DVBT_INTER_CNT_LEN] = {0x1, 0xd8, 3, 0},
|
|
[DVBT_GI_PGA_STATE] = {0x1, 0xe6, 3, 3},
|
|
[DVBT_EN_AGC_PGA] = {0x1, 0xd7, 0, 0},
|
|
[DVBT_CKOUTPAR] = {0x1, 0x7b, 5, 5},
|
|
[DVBT_CKOUT_PWR] = {0x1, 0x7b, 6, 6},
|
|
[DVBT_SYNC_DUR] = {0x1, 0x7b, 7, 7},
|
|
[DVBT_ERR_DUR] = {0x1, 0x7c, 0, 0},
|
|
[DVBT_SYNC_LVL] = {0x1, 0x7c, 1, 1},
|
|
[DVBT_ERR_LVL] = {0x1, 0x7c, 2, 2},
|
|
[DVBT_VAL_LVL] = {0x1, 0x7c, 3, 3},
|
|
[DVBT_SERIAL] = {0x1, 0x7c, 4, 4},
|
|
[DVBT_SER_LSB] = {0x1, 0x7c, 5, 5},
|
|
[DVBT_CDIV_PH0] = {0x1, 0x7d, 3, 0},
|
|
[DVBT_CDIV_PH1] = {0x1, 0x7d, 7, 4},
|
|
[DVBT_MPEG_IO_OPT_2_2] = {0x0, 0x6, 7, 7},
|
|
[DVBT_MPEG_IO_OPT_1_0] = {0x0, 0x7, 7, 6},
|
|
[DVBT_CKOUTPAR_PIP] = {0x0, 0xb7, 4, 4},
|
|
[DVBT_CKOUT_PWR_PIP] = {0x0, 0xb7, 3, 3},
|
|
[DVBT_SYNC_LVL_PIP] = {0x0, 0xb7, 2, 2},
|
|
[DVBT_ERR_LVL_PIP] = {0x0, 0xb7, 1, 1},
|
|
[DVBT_VAL_LVL_PIP] = {0x0, 0xb7, 0, 0},
|
|
[DVBT_CKOUTPAR_PID] = {0x0, 0xb9, 4, 4},
|
|
[DVBT_CKOUT_PWR_PID] = {0x0, 0xb9, 3, 3},
|
|
[DVBT_SYNC_LVL_PID] = {0x0, 0xb9, 2, 2},
|
|
[DVBT_ERR_LVL_PID] = {0x0, 0xb9, 1, 1},
|
|
[DVBT_VAL_LVL_PID] = {0x0, 0xb9, 0, 0},
|
|
[DVBT_SM_PASS] = {0x1, 0x93, 11, 0},
|
|
[DVBT_AD7_SETTING] = {0x0, 0x11, 15, 0},
|
|
[DVBT_RSSI_R] = {0x3, 0x1, 6, 0},
|
|
[DVBT_ACI_DET_IND] = {0x3, 0x12, 0, 0},
|
|
[DVBT_REG_MON] = {0x0, 0xd, 1, 0},
|
|
[DVBT_REG_MONSEL] = {0x0, 0xd, 2, 2},
|
|
[DVBT_REG_GPE] = {0x0, 0xd, 7, 7},
|
|
[DVBT_REG_GPO] = {0x0, 0x10, 0, 0},
|
|
[DVBT_REG_4MSEL] = {0x0, 0x13, 0, 0},
|
|
};
|
|
|
|
/* write multiple hardware registers */
|
|
static int rtl2832_wr(struct rtl2832_dev *dev, u8 reg, u8 *val, int len)
|
|
{
|
|
int ret;
|
|
u8 buf[MAX_XFER_SIZE];
|
|
struct i2c_msg msg[1] = {
|
|
{
|
|
.addr = dev->cfg.i2c_addr,
|
|
.flags = 0,
|
|
.len = 1 + len,
|
|
.buf = buf,
|
|
}
|
|
};
|
|
|
|
if (1 + len > sizeof(buf)) {
|
|
dev_warn(&dev->i2c->dev,
|
|
"%s: i2c wr reg=%04x: len=%d is too big!\n",
|
|
KBUILD_MODNAME, reg, len);
|
|
return -EINVAL;
|
|
}
|
|
|
|
buf[0] = reg;
|
|
memcpy(&buf[1], val, len);
|
|
|
|
ret = i2c_transfer(dev->i2c_adapter, msg, 1);
|
|
if (ret == 1) {
|
|
ret = 0;
|
|
} else {
|
|
dev_warn(&dev->i2c->dev,
|
|
"%s: i2c wr failed=%d reg=%02x len=%d\n",
|
|
KBUILD_MODNAME, ret, reg, len);
|
|
ret = -EREMOTEIO;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* read multiple hardware registers */
|
|
static int rtl2832_rd(struct rtl2832_dev *dev, u8 reg, u8 *val, int len)
|
|
{
|
|
int ret;
|
|
struct i2c_msg msg[2] = {
|
|
{
|
|
.addr = dev->cfg.i2c_addr,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = ®,
|
|
}, {
|
|
.addr = dev->cfg.i2c_addr,
|
|
.flags = I2C_M_RD,
|
|
.len = len,
|
|
.buf = val,
|
|
}
|
|
};
|
|
|
|
ret = i2c_transfer(dev->i2c_adapter, msg, 2);
|
|
if (ret == 2) {
|
|
ret = 0;
|
|
} else {
|
|
dev_warn(&dev->i2c->dev,
|
|
"%s: i2c rd failed=%d reg=%02x len=%d\n",
|
|
KBUILD_MODNAME, ret, reg, len);
|
|
ret = -EREMOTEIO;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* write multiple registers */
|
|
static int rtl2832_wr_regs(struct rtl2832_dev *dev, u8 reg, u8 page, u8 *val,
|
|
int len)
|
|
{
|
|
int ret;
|
|
|
|
/* switch bank if needed */
|
|
if (page != dev->page) {
|
|
ret = rtl2832_wr(dev, 0x00, &page, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev->page = page;
|
|
}
|
|
|
|
return rtl2832_wr(dev, reg, val, len);
|
|
}
|
|
|
|
/* read multiple registers */
|
|
static int rtl2832_rd_regs(struct rtl2832_dev *dev, u8 reg, u8 page, u8 *val,
|
|
int len)
|
|
{
|
|
int ret;
|
|
|
|
/* switch bank if needed */
|
|
if (page != dev->page) {
|
|
ret = rtl2832_wr(dev, 0x00, &page, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev->page = page;
|
|
}
|
|
|
|
return rtl2832_rd(dev, reg, val, len);
|
|
}
|
|
|
|
/* write single register */
|
|
static int rtl2832_wr_reg(struct rtl2832_dev *dev, u8 reg, u8 page, u8 val)
|
|
{
|
|
return rtl2832_wr_regs(dev, reg, page, &val, 1);
|
|
}
|
|
|
|
/* read single register */
|
|
static int rtl2832_rd_reg(struct rtl2832_dev *dev, u8 reg, u8 page, u8 *val)
|
|
{
|
|
return rtl2832_rd_regs(dev, reg, page, val, 1);
|
|
}
|
|
|
|
static int rtl2832_rd_demod_reg(struct rtl2832_dev *dev, int reg, u32 *val)
|
|
{
|
|
int ret;
|
|
|
|
u8 reg_start_addr;
|
|
u8 msb, lsb;
|
|
u8 page;
|
|
u8 reading[4];
|
|
u32 reading_tmp;
|
|
int i;
|
|
|
|
u8 len;
|
|
u32 mask;
|
|
|
|
reg_start_addr = registers[reg].start_address;
|
|
msb = registers[reg].msb;
|
|
lsb = registers[reg].lsb;
|
|
page = registers[reg].page;
|
|
|
|
len = (msb >> 3) + 1;
|
|
mask = REG_MASK(msb - lsb);
|
|
|
|
ret = rtl2832_rd_regs(dev, reg_start_addr, page, &reading[0], len);
|
|
if (ret)
|
|
goto err;
|
|
|
|
reading_tmp = 0;
|
|
for (i = 0; i < len; i++)
|
|
reading_tmp |= reading[i] << ((len - 1 - i) * 8);
|
|
|
|
*val = (reading_tmp >> lsb) & mask;
|
|
|
|
return ret;
|
|
|
|
err:
|
|
dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
return ret;
|
|
|
|
}
|
|
|
|
static int rtl2832_wr_demod_reg(struct rtl2832_dev *dev, int reg, u32 val)
|
|
{
|
|
int ret, i;
|
|
u8 len;
|
|
u8 reg_start_addr;
|
|
u8 msb, lsb;
|
|
u8 page;
|
|
u32 mask;
|
|
|
|
|
|
u8 reading[4];
|
|
u8 writing[4];
|
|
u32 reading_tmp;
|
|
u32 writing_tmp;
|
|
|
|
|
|
reg_start_addr = registers[reg].start_address;
|
|
msb = registers[reg].msb;
|
|
lsb = registers[reg].lsb;
|
|
page = registers[reg].page;
|
|
|
|
len = (msb >> 3) + 1;
|
|
mask = REG_MASK(msb - lsb);
|
|
|
|
|
|
ret = rtl2832_rd_regs(dev, reg_start_addr, page, &reading[0], len);
|
|
if (ret)
|
|
goto err;
|
|
|
|
reading_tmp = 0;
|
|
for (i = 0; i < len; i++)
|
|
reading_tmp |= reading[i] << ((len - 1 - i) * 8);
|
|
|
|
writing_tmp = reading_tmp & ~(mask << lsb);
|
|
writing_tmp |= ((val & mask) << lsb);
|
|
|
|
|
|
for (i = 0; i < len; i++)
|
|
writing[i] = (writing_tmp >> ((len - 1 - i) * 8)) & 0xff;
|
|
|
|
ret = rtl2832_wr_regs(dev, reg_start_addr, page, &writing[0], len);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return ret;
|
|
|
|
err:
|
|
dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
return ret;
|
|
|
|
}
|
|
|
|
static int rtl2832_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
|
|
{
|
|
int ret;
|
|
struct rtl2832_dev *dev = fe->demodulator_priv;
|
|
|
|
dev_dbg(&dev->i2c->dev, "%s: enable=%d\n", __func__, enable);
|
|
|
|
/* gate already open or close */
|
|
if (dev->i2c_gate_state == enable)
|
|
return 0;
|
|
|
|
ret = rtl2832_wr_demod_reg(dev, DVBT_IIC_REPEAT, (enable ? 0x1 : 0x0));
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev->i2c_gate_state = enable;
|
|
|
|
return ret;
|
|
err:
|
|
dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int rtl2832_set_if(struct dvb_frontend *fe, u32 if_freq)
|
|
{
|
|
struct rtl2832_dev *dev = fe->demodulator_priv;
|
|
int ret;
|
|
u64 pset_iffreq;
|
|
u8 en_bbin = (if_freq == 0 ? 0x1 : 0x0);
|
|
|
|
/*
|
|
* PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22)
|
|
* / CrystalFreqHz)
|
|
*/
|
|
|
|
pset_iffreq = if_freq % dev->cfg.xtal;
|
|
pset_iffreq *= 0x400000;
|
|
pset_iffreq = div_u64(pset_iffreq, dev->cfg.xtal);
|
|
pset_iffreq = -pset_iffreq;
|
|
pset_iffreq = pset_iffreq & 0x3fffff;
|
|
dev_dbg(&dev->i2c->dev, "%s: if_frequency=%d pset_iffreq=%08x\n",
|
|
__func__, if_freq, (unsigned)pset_iffreq);
|
|
|
|
ret = rtl2832_wr_demod_reg(dev, DVBT_EN_BBIN, en_bbin);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rtl2832_wr_demod_reg(dev, DVBT_PSET_IFFREQ, pset_iffreq);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rtl2832_init(struct dvb_frontend *fe)
|
|
{
|
|
struct rtl2832_dev *dev = fe->demodulator_priv;
|
|
const struct rtl2832_reg_value *init;
|
|
int i, ret, len;
|
|
|
|
/* initialization values for the demodulator registers */
|
|
struct rtl2832_reg_value rtl2832_initial_regs[] = {
|
|
{DVBT_AD_EN_REG, 0x1},
|
|
{DVBT_AD_EN_REG1, 0x1},
|
|
{DVBT_RSD_BER_FAIL_VAL, 0x2800},
|
|
{DVBT_MGD_THD0, 0x10},
|
|
{DVBT_MGD_THD1, 0x20},
|
|
{DVBT_MGD_THD2, 0x20},
|
|
{DVBT_MGD_THD3, 0x40},
|
|
{DVBT_MGD_THD4, 0x22},
|
|
{DVBT_MGD_THD5, 0x32},
|
|
{DVBT_MGD_THD6, 0x37},
|
|
{DVBT_MGD_THD7, 0x39},
|
|
{DVBT_EN_BK_TRK, 0x0},
|
|
{DVBT_EN_CACQ_NOTCH, 0x0},
|
|
{DVBT_AD_AV_REF, 0x2a},
|
|
{DVBT_REG_PI, 0x6},
|
|
{DVBT_PIP_ON, 0x0},
|
|
{DVBT_CDIV_PH0, 0x8},
|
|
{DVBT_CDIV_PH1, 0x8},
|
|
{DVBT_SCALE1_B92, 0x4},
|
|
{DVBT_SCALE1_B93, 0xb0},
|
|
{DVBT_SCALE1_BA7, 0x78},
|
|
{DVBT_SCALE1_BA9, 0x28},
|
|
{DVBT_SCALE1_BAA, 0x59},
|
|
{DVBT_SCALE1_BAB, 0x83},
|
|
{DVBT_SCALE1_BAC, 0xd4},
|
|
{DVBT_SCALE1_BB0, 0x65},
|
|
{DVBT_SCALE1_BB1, 0x43},
|
|
{DVBT_KB_P1, 0x1},
|
|
{DVBT_KB_P2, 0x4},
|
|
{DVBT_KB_P3, 0x7},
|
|
{DVBT_K1_CR_STEP12, 0xa},
|
|
{DVBT_REG_GPE, 0x1},
|
|
{DVBT_SERIAL, 0x0},
|
|
{DVBT_CDIV_PH0, 0x9},
|
|
{DVBT_CDIV_PH1, 0x9},
|
|
{DVBT_MPEG_IO_OPT_2_2, 0x0},
|
|
{DVBT_MPEG_IO_OPT_1_0, 0x0},
|
|
{DVBT_TRK_KS_P2, 0x4},
|
|
{DVBT_TRK_KS_I2, 0x7},
|
|
{DVBT_TR_THD_SET2, 0x6},
|
|
{DVBT_TRK_KC_I2, 0x5},
|
|
{DVBT_CR_THD_SET2, 0x1},
|
|
};
|
|
|
|
dev_dbg(&dev->i2c->dev, "%s:\n", __func__);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rtl2832_initial_regs); i++) {
|
|
ret = rtl2832_wr_demod_reg(dev, rtl2832_initial_regs[i].reg,
|
|
rtl2832_initial_regs[i].value);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* load tuner specific settings */
|
|
dev_dbg(&dev->i2c->dev, "%s: load settings for tuner=%02x\n",
|
|
__func__, dev->cfg.tuner);
|
|
switch (dev->cfg.tuner) {
|
|
case RTL2832_TUNER_FC0012:
|
|
case RTL2832_TUNER_FC0013:
|
|
len = ARRAY_SIZE(rtl2832_tuner_init_fc0012);
|
|
init = rtl2832_tuner_init_fc0012;
|
|
break;
|
|
case RTL2832_TUNER_TUA9001:
|
|
len = ARRAY_SIZE(rtl2832_tuner_init_tua9001);
|
|
init = rtl2832_tuner_init_tua9001;
|
|
break;
|
|
case RTL2832_TUNER_E4000:
|
|
len = ARRAY_SIZE(rtl2832_tuner_init_e4000);
|
|
init = rtl2832_tuner_init_e4000;
|
|
break;
|
|
case RTL2832_TUNER_R820T:
|
|
case RTL2832_TUNER_R828D:
|
|
len = ARRAY_SIZE(rtl2832_tuner_init_r820t);
|
|
init = rtl2832_tuner_init_r820t;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
for (i = 0; i < len; i++) {
|
|
ret = rtl2832_wr_demod_reg(dev, init[i].reg, init[i].value);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/*
|
|
* r820t NIM code does a software reset here at the demod -
|
|
* may not be needed, as there's already a software reset at
|
|
* set_params()
|
|
*/
|
|
#if 1
|
|
/* soft reset */
|
|
ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0);
|
|
if (ret)
|
|
goto err;
|
|
#endif
|
|
|
|
dev->sleeping = false;
|
|
|
|
return ret;
|
|
|
|
err:
|
|
dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int rtl2832_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct rtl2832_dev *dev = fe->demodulator_priv;
|
|
|
|
dev_dbg(&dev->i2c->dev, "%s:\n", __func__);
|
|
dev->sleeping = true;
|
|
return 0;
|
|
}
|
|
|
|
static int rtl2832_get_tune_settings(struct dvb_frontend *fe,
|
|
struct dvb_frontend_tune_settings *s)
|
|
{
|
|
struct rtl2832_dev *dev = fe->demodulator_priv;
|
|
|
|
dev_dbg(&dev->i2c->dev, "%s:\n", __func__);
|
|
s->min_delay_ms = 1000;
|
|
s->step_size = fe->ops.info.frequency_stepsize * 2;
|
|
s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1;
|
|
return 0;
|
|
}
|
|
|
|
static int rtl2832_set_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct rtl2832_dev *dev = fe->demodulator_priv;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret, i, j;
|
|
u64 bw_mode, num, num2;
|
|
u32 resamp_ratio, cfreq_off_ratio;
|
|
static u8 bw_params[3][32] = {
|
|
/* 6 MHz bandwidth */
|
|
{
|
|
0xf5, 0xff, 0x15, 0x38, 0x5d, 0x6d, 0x52, 0x07, 0xfa, 0x2f,
|
|
0x53, 0xf5, 0x3f, 0xca, 0x0b, 0x91, 0xea, 0x30, 0x63, 0xb2,
|
|
0x13, 0xda, 0x0b, 0xc4, 0x18, 0x7e, 0x16, 0x66, 0x08, 0x67,
|
|
0x19, 0xe0,
|
|
},
|
|
|
|
/* 7 MHz bandwidth */
|
|
{
|
|
0xe7, 0xcc, 0xb5, 0xba, 0xe8, 0x2f, 0x67, 0x61, 0x00, 0xaf,
|
|
0x86, 0xf2, 0xbf, 0x59, 0x04, 0x11, 0xb6, 0x33, 0xa4, 0x30,
|
|
0x15, 0x10, 0x0a, 0x42, 0x18, 0xf8, 0x17, 0xd9, 0x07, 0x22,
|
|
0x19, 0x10,
|
|
},
|
|
|
|
/* 8 MHz bandwidth */
|
|
{
|
|
0x09, 0xf6, 0xd2, 0xa7, 0x9a, 0xc9, 0x27, 0x77, 0x06, 0xbf,
|
|
0xec, 0xf4, 0x4f, 0x0b, 0xfc, 0x01, 0x63, 0x35, 0x54, 0xa7,
|
|
0x16, 0x66, 0x08, 0xb4, 0x19, 0x6e, 0x19, 0x65, 0x05, 0xc8,
|
|
0x19, 0xe0,
|
|
},
|
|
};
|
|
|
|
|
|
dev_dbg(&dev->i2c->dev,
|
|
"%s: frequency=%d bandwidth_hz=%d inversion=%d\n",
|
|
__func__, c->frequency, c->bandwidth_hz, c->inversion);
|
|
|
|
/* program tuner */
|
|
if (fe->ops.tuner_ops.set_params)
|
|
fe->ops.tuner_ops.set_params(fe);
|
|
|
|
/* PIP mode related */
|
|
ret = rtl2832_wr_regs(dev, 0x92, 1, "\x00\x0f\xff", 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* If the frontend has get_if_frequency(), use it */
|
|
if (fe->ops.tuner_ops.get_if_frequency) {
|
|
u32 if_freq;
|
|
|
|
ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = rtl2832_set_if(fe, if_freq);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
switch (c->bandwidth_hz) {
|
|
case 6000000:
|
|
i = 0;
|
|
bw_mode = 48000000;
|
|
break;
|
|
case 7000000:
|
|
i = 1;
|
|
bw_mode = 56000000;
|
|
break;
|
|
case 8000000:
|
|
i = 2;
|
|
bw_mode = 64000000;
|
|
break;
|
|
default:
|
|
dev_dbg(&dev->i2c->dev, "%s: invalid bandwidth\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (j = 0; j < sizeof(bw_params[0]); j++) {
|
|
ret = rtl2832_wr_regs(dev, 0x1c+j, 1, &bw_params[i][j], 1);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
/* calculate and set resample ratio
|
|
* RSAMP_RATIO = floor(CrystalFreqHz * 7 * pow(2, 22)
|
|
* / ConstWithBandwidthMode)
|
|
*/
|
|
num = dev->cfg.xtal * 7;
|
|
num *= 0x400000;
|
|
num = div_u64(num, bw_mode);
|
|
resamp_ratio = num & 0x3ffffff;
|
|
ret = rtl2832_wr_demod_reg(dev, DVBT_RSAMP_RATIO, resamp_ratio);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* calculate and set cfreq off ratio
|
|
* CFREQ_OFF_RATIO = - floor(ConstWithBandwidthMode * pow(2, 20)
|
|
* / (CrystalFreqHz * 7))
|
|
*/
|
|
num = bw_mode << 20;
|
|
num2 = dev->cfg.xtal * 7;
|
|
num = div_u64(num, num2);
|
|
num = -num;
|
|
cfreq_off_ratio = num & 0xfffff;
|
|
ret = rtl2832_wr_demod_reg(dev, DVBT_CFREQ_OFF_RATIO, cfreq_off_ratio);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* soft reset */
|
|
ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return ret;
|
|
err:
|
|
dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int rtl2832_get_frontend(struct dvb_frontend *fe)
|
|
{
|
|
struct rtl2832_dev *dev = fe->demodulator_priv;
|
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
|
int ret;
|
|
u8 buf[3];
|
|
|
|
if (dev->sleeping)
|
|
return 0;
|
|
|
|
ret = rtl2832_rd_regs(dev, 0x3c, 3, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = rtl2832_rd_reg(dev, 0x51, 3, &buf[2]);
|
|
if (ret)
|
|
goto err;
|
|
|
|
dev_dbg(&dev->i2c->dev, "%s: TPS=%*ph\n", __func__, 3, buf);
|
|
|
|
switch ((buf[0] >> 2) & 3) {
|
|
case 0:
|
|
c->modulation = QPSK;
|
|
break;
|
|
case 1:
|
|
c->modulation = QAM_16;
|
|
break;
|
|
case 2:
|
|
c->modulation = QAM_64;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[2] >> 2) & 1) {
|
|
case 0:
|
|
c->transmission_mode = TRANSMISSION_MODE_2K;
|
|
break;
|
|
case 1:
|
|
c->transmission_mode = TRANSMISSION_MODE_8K;
|
|
}
|
|
|
|
switch ((buf[2] >> 0) & 3) {
|
|
case 0:
|
|
c->guard_interval = GUARD_INTERVAL_1_32;
|
|
break;
|
|
case 1:
|
|
c->guard_interval = GUARD_INTERVAL_1_16;
|
|
break;
|
|
case 2:
|
|
c->guard_interval = GUARD_INTERVAL_1_8;
|
|
break;
|
|
case 3:
|
|
c->guard_interval = GUARD_INTERVAL_1_4;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[0] >> 4) & 7) {
|
|
case 0:
|
|
c->hierarchy = HIERARCHY_NONE;
|
|
break;
|
|
case 1:
|
|
c->hierarchy = HIERARCHY_1;
|
|
break;
|
|
case 2:
|
|
c->hierarchy = HIERARCHY_2;
|
|
break;
|
|
case 3:
|
|
c->hierarchy = HIERARCHY_4;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[1] >> 3) & 7) {
|
|
case 0:
|
|
c->code_rate_HP = FEC_1_2;
|
|
break;
|
|
case 1:
|
|
c->code_rate_HP = FEC_2_3;
|
|
break;
|
|
case 2:
|
|
c->code_rate_HP = FEC_3_4;
|
|
break;
|
|
case 3:
|
|
c->code_rate_HP = FEC_5_6;
|
|
break;
|
|
case 4:
|
|
c->code_rate_HP = FEC_7_8;
|
|
break;
|
|
}
|
|
|
|
switch ((buf[1] >> 0) & 7) {
|
|
case 0:
|
|
c->code_rate_LP = FEC_1_2;
|
|
break;
|
|
case 1:
|
|
c->code_rate_LP = FEC_2_3;
|
|
break;
|
|
case 2:
|
|
c->code_rate_LP = FEC_3_4;
|
|
break;
|
|
case 3:
|
|
c->code_rate_LP = FEC_5_6;
|
|
break;
|
|
case 4:
|
|
c->code_rate_LP = FEC_7_8;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int rtl2832_read_status(struct dvb_frontend *fe, fe_status_t *status)
|
|
{
|
|
struct rtl2832_dev *dev = fe->demodulator_priv;
|
|
int ret;
|
|
u32 tmp;
|
|
*status = 0;
|
|
|
|
dev_dbg(&dev->i2c->dev, "%s:\n", __func__);
|
|
if (dev->sleeping)
|
|
return 0;
|
|
|
|
ret = rtl2832_rd_demod_reg(dev, DVBT_FSM_STAGE, &tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (tmp == 11) {
|
|
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
|
|
}
|
|
/* TODO find out if this is also true for rtl2832? */
|
|
/*else if (tmp == 10) {
|
|
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
|
FE_HAS_VITERBI;
|
|
}*/
|
|
|
|
return ret;
|
|
err:
|
|
dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int rtl2832_read_snr(struct dvb_frontend *fe, u16 *snr)
|
|
{
|
|
struct rtl2832_dev *dev = fe->demodulator_priv;
|
|
int ret, hierarchy, constellation;
|
|
u8 buf[2], tmp;
|
|
u16 tmp16;
|
|
#define CONSTELLATION_NUM 3
|
|
#define HIERARCHY_NUM 4
|
|
static const u32 snr_constant[CONSTELLATION_NUM][HIERARCHY_NUM] = {
|
|
{ 85387325, 85387325, 85387325, 85387325 },
|
|
{ 86676178, 86676178, 87167949, 87795660 },
|
|
{ 87659938, 87659938, 87885178, 88241743 },
|
|
};
|
|
|
|
/* reports SNR in resolution of 0.1 dB */
|
|
|
|
ret = rtl2832_rd_reg(dev, 0x3c, 3, &tmp);
|
|
if (ret)
|
|
goto err;
|
|
|
|
constellation = (tmp >> 2) & 0x03; /* [3:2] */
|
|
if (constellation > CONSTELLATION_NUM - 1)
|
|
goto err;
|
|
|
|
hierarchy = (tmp >> 4) & 0x07; /* [6:4] */
|
|
if (hierarchy > HIERARCHY_NUM - 1)
|
|
goto err;
|
|
|
|
ret = rtl2832_rd_regs(dev, 0x0c, 4, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
tmp16 = buf[0] << 8 | buf[1];
|
|
|
|
if (tmp16)
|
|
*snr = (snr_constant[constellation][hierarchy] -
|
|
intlog10(tmp16)) / ((1 << 24) / 100);
|
|
else
|
|
*snr = 0;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int rtl2832_read_ber(struct dvb_frontend *fe, u32 *ber)
|
|
{
|
|
struct rtl2832_dev *dev = fe->demodulator_priv;
|
|
int ret;
|
|
u8 buf[2];
|
|
|
|
ret = rtl2832_rd_regs(dev, 0x4e, 3, buf, 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
*ber = buf[0] << 8 | buf[1];
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Delay mechanism to avoid unneeded I2C gate open / close. Gate close is
|
|
* delayed here a little bit in order to see if there is sequence of I2C
|
|
* messages sent to same I2C bus.
|
|
* We must use unlocked version of __i2c_transfer() in order to avoid deadlock
|
|
* as lock is already taken by calling muxed i2c_transfer().
|
|
*/
|
|
static void rtl2832_i2c_gate_work(struct work_struct *work)
|
|
{
|
|
struct rtl2832_dev *dev = container_of(work,
|
|
struct rtl2832_dev, i2c_gate_work.work);
|
|
struct i2c_adapter *adap = dev->i2c;
|
|
int ret;
|
|
u8 buf[2];
|
|
struct i2c_msg msg[1] = {
|
|
{
|
|
.addr = dev->cfg.i2c_addr,
|
|
.flags = 0,
|
|
.len = sizeof(buf),
|
|
.buf = buf,
|
|
}
|
|
};
|
|
|
|
/* select reg bank 1 */
|
|
buf[0] = 0x00;
|
|
buf[1] = 0x01;
|
|
ret = __i2c_transfer(adap, msg, 1);
|
|
if (ret != 1)
|
|
goto err;
|
|
|
|
dev->page = 1;
|
|
|
|
/* close I2C repeater gate */
|
|
buf[0] = 0x01;
|
|
buf[1] = 0x10;
|
|
ret = __i2c_transfer(adap, msg, 1);
|
|
if (ret != 1)
|
|
goto err;
|
|
|
|
dev->i2c_gate_state = false;
|
|
|
|
return;
|
|
err:
|
|
dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
|
|
return;
|
|
}
|
|
|
|
static int rtl2832_select(struct i2c_adapter *adap, void *mux_priv, u32 chan_id)
|
|
{
|
|
struct rtl2832_dev *dev = mux_priv;
|
|
int ret;
|
|
u8 buf[2], val;
|
|
struct i2c_msg msg[1] = {
|
|
{
|
|
.addr = dev->cfg.i2c_addr,
|
|
.flags = 0,
|
|
.len = sizeof(buf),
|
|
.buf = buf,
|
|
}
|
|
};
|
|
struct i2c_msg msg_rd[2] = {
|
|
{
|
|
.addr = dev->cfg.i2c_addr,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = "\x01",
|
|
}, {
|
|
.addr = dev->cfg.i2c_addr,
|
|
.flags = I2C_M_RD,
|
|
.len = 1,
|
|
.buf = &val,
|
|
}
|
|
};
|
|
|
|
/* terminate possible gate closing */
|
|
cancel_delayed_work_sync(&dev->i2c_gate_work);
|
|
|
|
if (dev->i2c_gate_state == chan_id)
|
|
return 0;
|
|
|
|
/* select reg bank 1 */
|
|
buf[0] = 0x00;
|
|
buf[1] = 0x01;
|
|
ret = __i2c_transfer(adap, msg, 1);
|
|
if (ret != 1)
|
|
goto err;
|
|
|
|
dev->page = 1;
|
|
|
|
/* we must read that register, otherwise there will be errors */
|
|
ret = __i2c_transfer(adap, msg_rd, 2);
|
|
if (ret != 2)
|
|
goto err;
|
|
|
|
/* open or close I2C repeater gate */
|
|
buf[0] = 0x01;
|
|
if (chan_id == 1)
|
|
buf[1] = 0x18; /* open */
|
|
else
|
|
buf[1] = 0x10; /* close */
|
|
|
|
ret = __i2c_transfer(adap, msg, 1);
|
|
if (ret != 1)
|
|
goto err;
|
|
|
|
dev->i2c_gate_state = chan_id;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&dev->i2c->dev, "%s: failed=%d\n", __func__, ret);
|
|
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
static int rtl2832_deselect(struct i2c_adapter *adap, void *mux_priv,
|
|
u32 chan_id)
|
|
{
|
|
struct rtl2832_dev *dev = mux_priv;
|
|
schedule_delayed_work(&dev->i2c_gate_work, usecs_to_jiffies(100));
|
|
return 0;
|
|
}
|
|
|
|
static struct dvb_frontend_ops rtl2832_ops = {
|
|
.delsys = { SYS_DVBT },
|
|
.info = {
|
|
.name = "Realtek RTL2832 (DVB-T)",
|
|
.frequency_min = 174000000,
|
|
.frequency_max = 862000000,
|
|
.frequency_stepsize = 166667,
|
|
.caps = FE_CAN_FEC_1_2 |
|
|
FE_CAN_FEC_2_3 |
|
|
FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 |
|
|
FE_CAN_FEC_7_8 |
|
|
FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK |
|
|
FE_CAN_QAM_16 |
|
|
FE_CAN_QAM_64 |
|
|
FE_CAN_QAM_AUTO |
|
|
FE_CAN_TRANSMISSION_MODE_AUTO |
|
|
FE_CAN_GUARD_INTERVAL_AUTO |
|
|
FE_CAN_HIERARCHY_AUTO |
|
|
FE_CAN_RECOVER |
|
|
FE_CAN_MUTE_TS
|
|
},
|
|
|
|
.init = rtl2832_init,
|
|
.sleep = rtl2832_sleep,
|
|
|
|
.get_tune_settings = rtl2832_get_tune_settings,
|
|
|
|
.set_frontend = rtl2832_set_frontend,
|
|
.get_frontend = rtl2832_get_frontend,
|
|
|
|
.read_status = rtl2832_read_status,
|
|
.read_snr = rtl2832_read_snr,
|
|
.read_ber = rtl2832_read_ber,
|
|
|
|
.i2c_gate_ctrl = rtl2832_i2c_gate_ctrl,
|
|
};
|
|
|
|
static struct dvb_frontend *rtl2832_get_dvb_frontend(struct i2c_client *client)
|
|
{
|
|
struct rtl2832_dev *dev = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
return &dev->fe;
|
|
}
|
|
|
|
static struct i2c_adapter *rtl2832_get_i2c_adapter_(struct i2c_client *client)
|
|
{
|
|
struct rtl2832_dev *dev = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
return dev->i2c_adapter_tuner;
|
|
}
|
|
|
|
static struct i2c_adapter *rtl2832_get_private_i2c_adapter_(struct i2c_client *client)
|
|
{
|
|
struct rtl2832_dev *dev = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
return dev->i2c_adapter;
|
|
}
|
|
|
|
static int rtl2832_enable_slave_ts(struct i2c_client *client)
|
|
{
|
|
struct rtl2832_dev *dev = i2c_get_clientdata(client);
|
|
int ret;
|
|
|
|
dev_dbg(&client->dev, "setting PIP mode\n");
|
|
|
|
ret = rtl2832_wr_regs(dev, 0x0c, 1, "\x5f\xff", 2);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = rtl2832_wr_demod_reg(dev, DVBT_PIP_ON, 0x1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = rtl2832_wr_reg(dev, 0xbc, 0, 0x18);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = rtl2832_wr_reg(dev, 0x22, 0, 0x01);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = rtl2832_wr_reg(dev, 0x26, 0, 0x1f);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = rtl2832_wr_reg(dev, 0x27, 0, 0xff);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = rtl2832_wr_regs(dev, 0x92, 1, "\x7f\xf7\xff", 3);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* soft reset */
|
|
ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int rtl2832_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct rtl2832_platform_data *pdata = client->dev.platform_data;
|
|
const struct rtl2832_config *config = pdata->config;
|
|
struct i2c_adapter *i2c = client->adapter;
|
|
struct rtl2832_dev *dev;
|
|
int ret;
|
|
u8 tmp;
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
/* allocate memory for the internal state */
|
|
dev = kzalloc(sizeof(struct rtl2832_dev), GFP_KERNEL);
|
|
if (dev == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
/* setup the state */
|
|
dev->client = client;
|
|
dev->i2c = i2c;
|
|
dev->tuner = config->tuner;
|
|
dev->sleeping = true;
|
|
memcpy(&dev->cfg, config, sizeof(struct rtl2832_config));
|
|
INIT_DELAYED_WORK(&dev->i2c_gate_work, rtl2832_i2c_gate_work);
|
|
|
|
/* create muxed i2c adapter for demod itself */
|
|
dev->i2c_adapter = i2c_add_mux_adapter(i2c, &i2c->dev, dev, 0, 0, 0,
|
|
rtl2832_select, NULL);
|
|
if (dev->i2c_adapter == NULL) {
|
|
ret = -ENODEV;
|
|
goto err_kfree;
|
|
}
|
|
|
|
/* check if the demod is there */
|
|
ret = rtl2832_rd_reg(dev, 0x00, 0x0, &tmp);
|
|
if (ret)
|
|
goto err_i2c_del_mux_adapter;
|
|
|
|
/* create muxed i2c adapter for demod tuner bus */
|
|
dev->i2c_adapter_tuner = i2c_add_mux_adapter(i2c, &i2c->dev, dev,
|
|
0, 1, 0, rtl2832_select, rtl2832_deselect);
|
|
if (dev->i2c_adapter_tuner == NULL) {
|
|
ret = -ENODEV;
|
|
goto err_i2c_del_mux_adapter;
|
|
}
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&dev->fe.ops, &rtl2832_ops, sizeof(struct dvb_frontend_ops));
|
|
dev->fe.demodulator_priv = dev;
|
|
i2c_set_clientdata(client, dev);
|
|
|
|
/* setup callbacks */
|
|
pdata->get_dvb_frontend = rtl2832_get_dvb_frontend;
|
|
pdata->get_i2c_adapter = rtl2832_get_i2c_adapter_;
|
|
pdata->get_private_i2c_adapter = rtl2832_get_private_i2c_adapter_;
|
|
pdata->enable_slave_ts = rtl2832_enable_slave_ts;
|
|
|
|
dev_info(&client->dev, "Realtek RTL2832 successfully attached\n");
|
|
return 0;
|
|
err_i2c_del_mux_adapter:
|
|
i2c_del_mux_adapter(dev->i2c_adapter);
|
|
err_kfree:
|
|
kfree(dev);
|
|
err:
|
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
static int rtl2832_remove(struct i2c_client *client)
|
|
{
|
|
struct rtl2832_dev *dev = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "\n");
|
|
|
|
cancel_delayed_work_sync(&dev->i2c_gate_work);
|
|
|
|
i2c_del_mux_adapter(dev->i2c_adapter_tuner);
|
|
|
|
i2c_del_mux_adapter(dev->i2c_adapter);
|
|
|
|
kfree(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id rtl2832_id_table[] = {
|
|
{"rtl2832", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, rtl2832_id_table);
|
|
|
|
static struct i2c_driver rtl2832_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "rtl2832",
|
|
},
|
|
.probe = rtl2832_probe,
|
|
.remove = rtl2832_remove,
|
|
.id_table = rtl2832_id_table,
|
|
};
|
|
|
|
module_i2c_driver(rtl2832_driver);
|
|
|
|
MODULE_AUTHOR("Thomas Mair <mair.thomas86@gmail.com>");
|
|
MODULE_DESCRIPTION("Realtek RTL2832 DVB-T demodulator driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION("0.5");
|