![]() Implement support for WRITE SAME(10) and WRITE SAME(16) in the SCSI disk driver. - We set the default maximum to 0xFFFF because there are several devices out there that only support two-byte block counts even with WRITE SAME(16). We only enable transfers bigger than 0xFFFF if the device explicitly reports MAXIMUM WRITE SAME LENGTH in the BLOCK LIMITS VPD. - max_write_same_blocks can be overriden per-device basis in sysfs. - The UNMAP discovery heuristics remain unchanged but the discard limits are tweaked to match the "real" WRITE SAME commands. - In the error handling logic we now distinguish between WRITE SAME with and without UNMAP set. The discovery process heuristics are: - If the device reports a SCSI level of SPC-3 or greater we'll issue READ SUPPORTED OPERATION CODES to find out whether WRITE SAME(16) is supported. If that's the case we will use it. - If the device supports the block limits VPD and reports a MAXIMUM WRITE SAME LENGTH bigger than 0xFFFF we will use WRITE SAME(16). - Otherwise we will use WRITE SAME(10) unless the target LBA is beyond 0xFFFFFFFF or the block count exceeds 0xFFFF. - no_write_same is set for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> |
||
---|---|---|
.. | ||
core-card.c | ||
core-cdev.c | ||
core-device.c | ||
core-iso.c | ||
core-topology.c | ||
core-transaction.c | ||
core.h | ||
init_ohci1394_dma.c | ||
Kconfig | ||
Makefile | ||
net.c | ||
nosy-user.h | ||
nosy.c | ||
nosy.h | ||
ohci.c | ||
ohci.h | ||
sbp2.c |