![Mauro Carvalho Chehab](/assets/img/avatar_default.png)
Due to the 80-cols restrictions, and latter due to checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. As we're right now fixing other drivers due to KERN_CONT, we need to be able to identify what printk strings don't end with a "\n". It is a way easier to detect those if we don't break long lines. So, join those continuation lines. The patch was generated via the script below, and manually adjusted if needed. </script> use Text::Tabs; while (<>) { if ($next ne "") { $c=$_; if ($c =~ /^\s+\"(.*)/) { $c2=$1; $next =~ s/\"\n$//; $n = expand($next); $funpos = index($n, '('); $pos = index($c2, '",'); if ($funpos && $pos > 0) { $s1 = substr $c2, 0, $pos + 2; $s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2; $s2 =~ s/^\s+//; $s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne ""); print unexpand("$next$s1\n"); print unexpand("$s2\n") if ($s2 ne ""); } else { print "$next$c2\n"; } $next=""; next; } else { print $next; } $next=""; } else { if (m/\"$/) { if (!m/\\n\"$/) { $next=$_; next; } } } print $_; } </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
618 lines
16 KiB
C
618 lines
16 KiB
C
/*
|
|
* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
|
|
* flexcop-usb.c - covers the USB part
|
|
* see flexcop.c for copyright information
|
|
*/
|
|
#define FC_LOG_PREFIX "flexcop_usb"
|
|
#include "flexcop-usb.h"
|
|
#include "flexcop-common.h"
|
|
|
|
/* Version information */
|
|
#define DRIVER_VERSION "0.1"
|
|
#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver"
|
|
#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@posteo.de>"
|
|
|
|
/* debug */
|
|
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
|
|
#define dprintk(level,args...) \
|
|
do { if ((debug & level)) printk(args); } while (0)
|
|
|
|
#define debug_dump(b, l, method) do {\
|
|
int i; \
|
|
for (i = 0; i < l; i++) \
|
|
method("%02x ", b[i]); \
|
|
method("\n"); \
|
|
} while (0)
|
|
|
|
#define DEBSTATUS ""
|
|
#else
|
|
#define dprintk(level, args...)
|
|
#define debug_dump(b, l, method)
|
|
#define DEBSTATUS " (debugging is not enabled)"
|
|
#endif
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS);
|
|
#undef DEBSTATUS
|
|
|
|
#define deb_info(args...) dprintk(0x01, args)
|
|
#define deb_ts(args...) dprintk(0x02, args)
|
|
#define deb_ctrl(args...) dprintk(0x04, args)
|
|
#define deb_i2c(args...) dprintk(0x08, args)
|
|
#define deb_v8(args...) dprintk(0x10, args)
|
|
|
|
/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits
|
|
* in the IBI address, to make the V8 code simpler.
|
|
* PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (the six bits used)
|
|
* in general: 0000 0HHH 000L LL00
|
|
* IBI ADDRESS FORMAT: RHHH BLLL
|
|
*
|
|
* where R is the read(1)/write(0) bit, B is the busy bit
|
|
* and HHH and LLL are the two sets of three bits from the PCI address.
|
|
*/
|
|
#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) \
|
|
(((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70))
|
|
#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) \
|
|
(((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4))
|
|
|
|
/*
|
|
* DKT 020228
|
|
* - forget about this VENDOR_BUFFER_SIZE, read and write register
|
|
* deal with DWORD or 4 bytes, that should be should from now on
|
|
* - from now on, we don't support anything older than firm 1.00
|
|
* I eliminated the write register as a 2 trip of writing hi word and lo word
|
|
* and force this to write only 4 bytes at a time.
|
|
* NOTE: this should work with all the firmware from 1.00 and newer
|
|
*/
|
|
static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u32 *val, u8 read)
|
|
{
|
|
struct flexcop_usb *fc_usb = fc->bus_specific;
|
|
u8 request = read ? B2C2_USB_READ_REG : B2C2_USB_WRITE_REG;
|
|
u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR;
|
|
u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) |
|
|
(read ? 0x80 : 0);
|
|
int ret;
|
|
|
|
mutex_lock(&fc_usb->data_mutex);
|
|
if (!read)
|
|
memcpy(fc_usb->data, val, sizeof(*val));
|
|
|
|
ret = usb_control_msg(fc_usb->udev,
|
|
read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT,
|
|
request,
|
|
request_type, /* 0xc0 read or 0x40 write */
|
|
wAddress,
|
|
0,
|
|
fc_usb->data,
|
|
sizeof(u32),
|
|
B2C2_WAIT_FOR_OPERATION_RDW * HZ);
|
|
|
|
if (ret != sizeof(u32)) {
|
|
err("error while %s dword from %d (%d).", read ? "reading" :
|
|
"writing", wAddress, wRegOffsPCI);
|
|
if (ret >= 0)
|
|
ret = -EIO;
|
|
}
|
|
|
|
if (read && ret >= 0)
|
|
memcpy(val, fc_usb->data, sizeof(*val));
|
|
mutex_unlock(&fc_usb->data_mutex);
|
|
|
|
return ret;
|
|
}
|
|
/*
|
|
* DKT 010817 - add support for V8 memory read/write and flash update
|
|
*/
|
|
static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
|
|
flexcop_usb_request_t req, u8 page, u16 wAddress,
|
|
u8 *pbBuffer, u32 buflen)
|
|
{
|
|
u8 request_type = USB_TYPE_VENDOR;
|
|
u16 wIndex;
|
|
int nWaitTime, pipe, ret;
|
|
wIndex = page << 8;
|
|
|
|
if (buflen > sizeof(fc_usb->data)) {
|
|
err("Buffer size bigger than max URB control message\n");
|
|
return -EIO;
|
|
}
|
|
|
|
switch (req) {
|
|
case B2C2_USB_READ_V8_MEM:
|
|
nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
|
|
request_type |= USB_DIR_IN;
|
|
pipe = B2C2_USB_CTRL_PIPE_IN;
|
|
break;
|
|
case B2C2_USB_WRITE_V8_MEM:
|
|
wIndex |= pbBuffer[0];
|
|
request_type |= USB_DIR_OUT;
|
|
nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE;
|
|
pipe = B2C2_USB_CTRL_PIPE_OUT;
|
|
break;
|
|
case B2C2_USB_FLASH_BLOCK:
|
|
request_type |= USB_DIR_OUT;
|
|
nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH;
|
|
pipe = B2C2_USB_CTRL_PIPE_OUT;
|
|
break;
|
|
default:
|
|
deb_info("unsupported request for v8_mem_req %x.\n", req);
|
|
return -EINVAL;
|
|
}
|
|
deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n", request_type, req,
|
|
wAddress, wIndex, buflen);
|
|
|
|
mutex_lock(&fc_usb->data_mutex);
|
|
|
|
if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)
|
|
memcpy(fc_usb->data, pbBuffer, buflen);
|
|
|
|
ret = usb_control_msg(fc_usb->udev, pipe,
|
|
req,
|
|
request_type,
|
|
wAddress,
|
|
wIndex,
|
|
fc_usb->data,
|
|
buflen,
|
|
nWaitTime * HZ);
|
|
if (ret != buflen)
|
|
ret = -EIO;
|
|
|
|
if (ret >= 0) {
|
|
ret = 0;
|
|
if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
|
|
memcpy(pbBuffer, fc_usb->data, buflen);
|
|
}
|
|
|
|
mutex_unlock(&fc_usb->data_mutex);
|
|
|
|
debug_dump(pbBuffer, ret, deb_v8);
|
|
return ret;
|
|
}
|
|
|
|
#define bytes_left_to_read_on_page(paddr,buflen) \
|
|
((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \
|
|
? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)))
|
|
|
|
static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb,
|
|
flexcop_usb_request_t req, flexcop_usb_mem_page_t page_start,
|
|
u32 addr, int extended, u8 *buf, u32 len)
|
|
{
|
|
int i,ret = 0;
|
|
u16 wMax;
|
|
u32 pagechunk = 0;
|
|
|
|
switch(req) {
|
|
case B2C2_USB_READ_V8_MEM:
|
|
wMax = USB_MEM_READ_MAX;
|
|
break;
|
|
case B2C2_USB_WRITE_V8_MEM:
|
|
wMax = USB_MEM_WRITE_MAX;
|
|
break;
|
|
case B2C2_USB_FLASH_BLOCK:
|
|
wMax = USB_FLASH_MAX;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
for (i = 0; i < len;) {
|
|
pagechunk =
|
|
wMax < bytes_left_to_read_on_page(addr, len) ?
|
|
wMax :
|
|
bytes_left_to_read_on_page(addr, len);
|
|
deb_info("%x\n",
|
|
(addr & V8_MEMORY_PAGE_MASK) |
|
|
(V8_MEMORY_EXTENDED*extended));
|
|
|
|
ret = flexcop_usb_v8_memory_req(fc_usb, req,
|
|
page_start + (addr / V8_MEMORY_PAGE_SIZE),
|
|
(addr & V8_MEMORY_PAGE_MASK) |
|
|
(V8_MEMORY_EXTENDED*extended),
|
|
&buf[i], pagechunk);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
addr += pagechunk;
|
|
len -= pagechunk;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended)
|
|
{
|
|
return flexcop_usb_memory_req(fc->bus_specific, B2C2_USB_READ_V8_MEM,
|
|
V8_MEMORY_PAGE_FLASH, 0x1f010, 1,
|
|
fc->dvb_adapter.proposed_mac, 6);
|
|
}
|
|
|
|
/* usb i2c stuff */
|
|
static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
|
|
flexcop_usb_request_t req, flexcop_usb_i2c_function_t func,
|
|
u8 chipaddr, u8 addr, u8 *buf, u8 buflen)
|
|
{
|
|
struct flexcop_usb *fc_usb = i2c->fc->bus_specific;
|
|
u16 wValue, wIndex;
|
|
int nWaitTime, pipe, ret;
|
|
u8 request_type = USB_TYPE_VENDOR;
|
|
|
|
if (buflen > sizeof(fc_usb->data)) {
|
|
err("Buffer size bigger than max URB control message\n");
|
|
return -EIO;
|
|
}
|
|
|
|
switch (func) {
|
|
case USB_FUNC_I2C_WRITE:
|
|
case USB_FUNC_I2C_MULTIWRITE:
|
|
case USB_FUNC_I2C_REPEATWRITE:
|
|
/* DKT 020208 - add this to support special case of DiSEqC */
|
|
case USB_FUNC_I2C_CHECKWRITE:
|
|
pipe = B2C2_USB_CTRL_PIPE_OUT;
|
|
nWaitTime = 2;
|
|
request_type |= USB_DIR_OUT;
|
|
break;
|
|
case USB_FUNC_I2C_READ:
|
|
case USB_FUNC_I2C_REPEATREAD:
|
|
pipe = B2C2_USB_CTRL_PIPE_IN;
|
|
nWaitTime = 2;
|
|
request_type |= USB_DIR_IN;
|
|
break;
|
|
default:
|
|
deb_info("unsupported function for i2c_req %x\n", func);
|
|
return -EINVAL;
|
|
}
|
|
wValue = (func << 8) | (i2c->port << 4);
|
|
wIndex = (chipaddr << 8 ) | addr;
|
|
|
|
deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",
|
|
func, request_type, req,
|
|
wValue & 0xff, wValue >> 8,
|
|
wIndex & 0xff, wIndex >> 8);
|
|
|
|
mutex_lock(&fc_usb->data_mutex);
|
|
|
|
if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)
|
|
memcpy(fc_usb->data, buf, buflen);
|
|
|
|
ret = usb_control_msg(fc_usb->udev, pipe,
|
|
req,
|
|
request_type,
|
|
wValue,
|
|
wIndex,
|
|
fc_usb->data,
|
|
buflen,
|
|
nWaitTime * HZ);
|
|
|
|
if (ret != buflen)
|
|
ret = -EIO;
|
|
|
|
if (ret >= 0) {
|
|
ret = 0;
|
|
if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
|
|
memcpy(buf, fc_usb->data, buflen);
|
|
}
|
|
|
|
mutex_unlock(&fc_usb->data_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* actual bus specific access functions,
|
|
make sure prototype are/will be equal to pci */
|
|
static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc,
|
|
flexcop_ibi_register reg)
|
|
{
|
|
flexcop_ibi_value val;
|
|
val.raw = 0;
|
|
flexcop_usb_readwrite_dw(fc, reg, &val.raw, 1);
|
|
return val;
|
|
}
|
|
|
|
static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc,
|
|
flexcop_ibi_register reg, flexcop_ibi_value val)
|
|
{
|
|
return flexcop_usb_readwrite_dw(fc, reg, &val.raw, 0);
|
|
}
|
|
|
|
static int flexcop_usb_i2c_request(struct flexcop_i2c_adapter *i2c,
|
|
flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len)
|
|
{
|
|
if (op == FC_READ)
|
|
return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
|
|
USB_FUNC_I2C_READ, chipaddr, addr, buf, len);
|
|
else
|
|
return flexcop_usb_i2c_req(i2c, B2C2_USB_I2C_REQUEST,
|
|
USB_FUNC_I2C_WRITE, chipaddr, addr, buf, len);
|
|
}
|
|
|
|
static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb,
|
|
u8 *buffer, int buffer_length)
|
|
{
|
|
u8 *b;
|
|
int l;
|
|
|
|
deb_ts("tmp_buffer_length=%d, buffer_length=%d\n",
|
|
fc_usb->tmp_buffer_length, buffer_length);
|
|
|
|
if (fc_usb->tmp_buffer_length > 0) {
|
|
memcpy(fc_usb->tmp_buffer+fc_usb->tmp_buffer_length, buffer,
|
|
buffer_length);
|
|
fc_usb->tmp_buffer_length += buffer_length;
|
|
b = fc_usb->tmp_buffer;
|
|
l = fc_usb->tmp_buffer_length;
|
|
} else {
|
|
b=buffer;
|
|
l=buffer_length;
|
|
}
|
|
|
|
while (l >= 190) {
|
|
if (*b == 0xff) {
|
|
switch (*(b+1) & 0x03) {
|
|
case 0x01: /* media packet */
|
|
if (*(b+2) == 0x47)
|
|
flexcop_pass_dmx_packets(
|
|
fc_usb->fc_dev, b+2, 1);
|
|
else
|
|
deb_ts("not ts packet %*ph\n", 4, b+2);
|
|
b += 190;
|
|
l -= 190;
|
|
break;
|
|
default:
|
|
deb_ts("wrong packet type\n");
|
|
l = 0;
|
|
break;
|
|
}
|
|
} else {
|
|
deb_ts("wrong header\n");
|
|
l = 0;
|
|
}
|
|
}
|
|
|
|
if (l>0)
|
|
memcpy(fc_usb->tmp_buffer, b, l);
|
|
fc_usb->tmp_buffer_length = l;
|
|
}
|
|
|
|
static void flexcop_usb_urb_complete(struct urb *urb)
|
|
{
|
|
struct flexcop_usb *fc_usb = urb->context;
|
|
int i;
|
|
|
|
if (urb->actual_length > 0)
|
|
deb_ts("urb completed, bufsize: %d actlen; %d\n",
|
|
urb->transfer_buffer_length, urb->actual_length);
|
|
|
|
for (i = 0; i < urb->number_of_packets; i++) {
|
|
if (urb->iso_frame_desc[i].status < 0) {
|
|
err("iso frame descriptor %d has an error: %d\n", i,
|
|
urb->iso_frame_desc[i].status);
|
|
} else
|
|
if (urb->iso_frame_desc[i].actual_length > 0) {
|
|
deb_ts("passed %d bytes to the demux\n",
|
|
urb->iso_frame_desc[i].actual_length);
|
|
|
|
flexcop_usb_process_frame(fc_usb,
|
|
urb->transfer_buffer +
|
|
urb->iso_frame_desc[i].offset,
|
|
urb->iso_frame_desc[i].actual_length);
|
|
}
|
|
urb->iso_frame_desc[i].status = 0;
|
|
urb->iso_frame_desc[i].actual_length = 0;
|
|
}
|
|
usb_submit_urb(urb,GFP_ATOMIC);
|
|
}
|
|
|
|
static int flexcop_usb_stream_control(struct flexcop_device *fc, int onoff)
|
|
{
|
|
/* submit/kill iso packets */
|
|
return 0;
|
|
}
|
|
|
|
static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb)
|
|
{
|
|
int i;
|
|
for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++)
|
|
if (fc_usb->iso_urb[i] != NULL) {
|
|
deb_ts("unlinking/killing urb no. %d\n",i);
|
|
usb_kill_urb(fc_usb->iso_urb[i]);
|
|
usb_free_urb(fc_usb->iso_urb[i]);
|
|
}
|
|
|
|
if (fc_usb->iso_buffer != NULL)
|
|
usb_free_coherent(fc_usb->udev,
|
|
fc_usb->buffer_size, fc_usb->iso_buffer,
|
|
fc_usb->dma_addr);
|
|
}
|
|
|
|
static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
|
|
{
|
|
u16 frame_size = le16_to_cpu(
|
|
fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
|
|
int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO *
|
|
frame_size, i, j, ret;
|
|
int buffer_offset = 0;
|
|
|
|
deb_ts("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n",
|
|
B2C2_USB_NUM_ISO_URB,
|
|
B2C2_USB_FRAMES_PER_ISO, frame_size, bufsize);
|
|
|
|
fc_usb->iso_buffer = usb_alloc_coherent(fc_usb->udev,
|
|
bufsize, GFP_KERNEL, &fc_usb->dma_addr);
|
|
if (fc_usb->iso_buffer == NULL)
|
|
return -ENOMEM;
|
|
|
|
memset(fc_usb->iso_buffer, 0, bufsize);
|
|
fc_usb->buffer_size = bufsize;
|
|
|
|
/* creating iso urbs */
|
|
for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
|
|
fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,
|
|
GFP_ATOMIC);
|
|
if (fc_usb->iso_urb[i] == NULL) {
|
|
ret = -ENOMEM;
|
|
goto urb_error;
|
|
}
|
|
}
|
|
|
|
/* initialising and submitting iso urbs */
|
|
for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) {
|
|
int frame_offset = 0;
|
|
struct urb *urb = fc_usb->iso_urb[i];
|
|
deb_ts("initializing and submitting urb no. %d (buf_offset: %d).\n",
|
|
i, buffer_offset);
|
|
|
|
urb->dev = fc_usb->udev;
|
|
urb->context = fc_usb;
|
|
urb->complete = flexcop_usb_urb_complete;
|
|
urb->pipe = B2C2_USB_DATA_PIPE;
|
|
urb->transfer_flags = URB_ISO_ASAP;
|
|
urb->interval = 1;
|
|
urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO;
|
|
urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO;
|
|
urb->transfer_buffer = fc_usb->iso_buffer + buffer_offset;
|
|
|
|
buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO;
|
|
for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) {
|
|
deb_ts("urb no: %d, frame: %d, frame_offset: %d\n",
|
|
i, j, frame_offset);
|
|
urb->iso_frame_desc[j].offset = frame_offset;
|
|
urb->iso_frame_desc[j].length = frame_size;
|
|
frame_offset += frame_size;
|
|
}
|
|
|
|
if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) {
|
|
err("submitting urb %d failed with %d.", i, ret);
|
|
goto urb_error;
|
|
}
|
|
deb_ts("submitted urb no. %d.\n",i);
|
|
}
|
|
|
|
/* SRAM */
|
|
flexcop_sram_set_dest(fc_usb->fc_dev, FC_SRAM_DEST_MEDIA |
|
|
FC_SRAM_DEST_NET | FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI,
|
|
FC_SRAM_DEST_TARGET_WAN_USB);
|
|
flexcop_wan_set_speed(fc_usb->fc_dev, FC_WAN_SPEED_8MBITS);
|
|
flexcop_sram_ctrl(fc_usb->fc_dev, 1, 1, 1);
|
|
return 0;
|
|
|
|
urb_error:
|
|
flexcop_usb_transfer_exit(fc_usb);
|
|
return ret;
|
|
}
|
|
|
|
static int flexcop_usb_init(struct flexcop_usb *fc_usb)
|
|
{
|
|
/* use the alternate setting with the larges buffer */
|
|
usb_set_interface(fc_usb->udev,0,1);
|
|
switch (fc_usb->udev->speed) {
|
|
case USB_SPEED_LOW:
|
|
err("cannot handle USB speed because it is too slow.");
|
|
return -ENODEV;
|
|
break;
|
|
case USB_SPEED_FULL:
|
|
info("running at FULL speed.");
|
|
break;
|
|
case USB_SPEED_HIGH:
|
|
info("running at HIGH speed.");
|
|
break;
|
|
case USB_SPEED_UNKNOWN: /* fall through */
|
|
default:
|
|
err("cannot handle USB speed because it is unknown.");
|
|
return -ENODEV;
|
|
}
|
|
usb_set_intfdata(fc_usb->uintf, fc_usb);
|
|
return 0;
|
|
}
|
|
|
|
static void flexcop_usb_exit(struct flexcop_usb *fc_usb)
|
|
{
|
|
usb_set_intfdata(fc_usb->uintf, NULL);
|
|
}
|
|
|
|
static int flexcop_usb_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct usb_device *udev = interface_to_usbdev(intf);
|
|
struct flexcop_usb *fc_usb = NULL;
|
|
struct flexcop_device *fc = NULL;
|
|
int ret;
|
|
|
|
if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) {
|
|
err("out of memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* general flexcop init */
|
|
fc_usb = fc->bus_specific;
|
|
fc_usb->fc_dev = fc;
|
|
mutex_init(&fc_usb->data_mutex);
|
|
|
|
fc->read_ibi_reg = flexcop_usb_read_ibi_reg;
|
|
fc->write_ibi_reg = flexcop_usb_write_ibi_reg;
|
|
fc->i2c_request = flexcop_usb_i2c_request;
|
|
fc->get_mac_addr = flexcop_usb_get_mac_addr;
|
|
|
|
fc->stream_control = flexcop_usb_stream_control;
|
|
|
|
fc->pid_filtering = 1;
|
|
fc->bus_type = FC_USB;
|
|
|
|
fc->dev = &udev->dev;
|
|
fc->owner = THIS_MODULE;
|
|
|
|
/* bus specific part */
|
|
fc_usb->udev = udev;
|
|
fc_usb->uintf = intf;
|
|
if ((ret = flexcop_usb_init(fc_usb)) != 0)
|
|
goto err_kfree;
|
|
|
|
/* init flexcop */
|
|
if ((ret = flexcop_device_initialize(fc)) != 0)
|
|
goto err_usb_exit;
|
|
|
|
/* xfer init */
|
|
if ((ret = flexcop_usb_transfer_init(fc_usb)) != 0)
|
|
goto err_fc_exit;
|
|
|
|
info("%s successfully initialized and connected.", DRIVER_NAME);
|
|
return 0;
|
|
|
|
err_fc_exit:
|
|
flexcop_device_exit(fc);
|
|
err_usb_exit:
|
|
flexcop_usb_exit(fc_usb);
|
|
err_kfree:
|
|
flexcop_device_kfree(fc);
|
|
return ret;
|
|
}
|
|
|
|
static void flexcop_usb_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct flexcop_usb *fc_usb = usb_get_intfdata(intf);
|
|
flexcop_usb_transfer_exit(fc_usb);
|
|
flexcop_device_exit(fc_usb->fc_dev);
|
|
flexcop_usb_exit(fc_usb);
|
|
flexcop_device_kfree(fc_usb->fc_dev);
|
|
info("%s successfully deinitialized and disconnected.", DRIVER_NAME);
|
|
}
|
|
|
|
static struct usb_device_id flexcop_usb_table [] = {
|
|
{ USB_DEVICE(0x0af7, 0x0101) },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE (usb, flexcop_usb_table);
|
|
|
|
/* usb specific object needed to register this driver with the usb subsystem */
|
|
static struct usb_driver flexcop_usb_driver = {
|
|
.name = "b2c2_flexcop_usb",
|
|
.probe = flexcop_usb_probe,
|
|
.disconnect = flexcop_usb_disconnect,
|
|
.id_table = flexcop_usb_table,
|
|
};
|
|
|
|
module_usb_driver(flexcop_usb_driver);
|
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_NAME);
|
|
MODULE_LICENSE("GPL");
|