alistair23-linux/arch/arm/mach-omap2
Kishon Vijay Abraham I 0717103e65 ARM: DRA7: hwmod_data: Fix hwmod data for pcie
Fixed hwmod data for pcie by having the correct module mode offset.
Previously this module mode offset was part of pcie PHY which was wrong.
Now this module mode offset was moved to pcie hwmod and removed the hwmod data
for pcie phy. While at that renamed pcie_hwmod to pciess_hwmod in order
to match with the name given in TRM.

This helps to get rid of the following warning
"omap_hwmod: pcie1: _wait_target_disable failed"

[Grygorii.Strashko@linaro.org: Found the issue that actually caused
 "omap_hwmod: pcie1: _wait_target_disable failed"]
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-02-26 00:02:28 -07:00
..
include/mach
am33xx-restart.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
am33xx.h
board-cm-t35.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
board-devkit8000.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-flash.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
board-flash.h ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
board-generic.c ARM: SoC platform changes 2015-02-17 09:27:54 -08:00
board-ldp.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-n8x0.c ARM: SoC/OMAP GPMC driver cleanup and move for 3.19 2014-12-09 16:57:56 -08:00
board-omap3beagle.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-omap3logic.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-omap3pandora.c ARM: OMAP2+: Make sure pandora_wl1251_init_card() applies to SDIO only 2015-01-19 09:56:04 +01:00
board-omap3stalker.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-omap3touchbook.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-overo.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-rx51-peripherals.c media updates for v3.19-rc1 2014-12-11 11:49:23 -08:00
board-rx51-video.c ARM: OMAP2+: N900: remove omapdss init for DT boot 2014-04-18 16:37:43 -07:00
board-rx51.c arm: omap: irq: drop omap3_intc_handle_irq() 2014-09-11 13:05:40 -07:00
board-rx51.h
clkt2xxx_dpll.c
clkt2xxx_dpllcore.c ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
clkt2xxx_virt_prcm_set.c ARM: OMAP2: clock: add DT boot support for cpufreq_ck 2014-05-28 13:05:57 +03:00
clkt34xx_dpll3m2.c
clkt_clksel.c
clkt_dpll.c Few fixes for the v3.17 merge window: 2014-08-09 08:23:27 -07:00
clkt_iclk.c ARM: OMAP2+: clock/interface: remove some headers from clkt_iclk.c file 2014-07-15 14:09:24 -06:00
clock.c The clock framework changes for 3.20 contain the usual driver additions, 2015-02-21 12:30:30 -08:00
clock.h The clock framework changes for 3.20 contain the usual driver additions, 2015-02-21 12:30:30 -08:00
clock2xxx.c
clock2xxx.h ARM: OMAP2: clock: remove unused apll code 2015-01-07 10:54:40 -08:00
clock3xxx.c ARM: OMAP3: clock: add support for dpll4_set_rate_and_parent 2014-11-13 09:26:33 -07:00
clock3xxx.h
clock34xx.c
clock34xx.h
clock36xx.c
clock36xx.h
clock44xx.h
clock2430.c
clock3517.c
clock3517.h
clock_common_data.c arm: omap2+ remove dead clock code 2015-02-02 14:23:39 -08:00
clockdomain.c
clockdomain.h ARM: OMAP2+: Add clock domain support for dm816x 2015-01-26 09:26:32 -08:00
clockdomains2xxx_3xxx_data.c
clockdomains3xxx_data.c ARM: OMAP3: fix iva mmu programming issues 2014-03-12 09:48:26 -07:00
clockdomains7xx_data.c
clockdomains33xx_data.c
clockdomains43xx_data.c
clockdomains44xx_data.c
clockdomains54xx_data.c
clockdomains81xx_data.c ARM: OMAP2+: Add clock domain support for dm816x 2015-01-26 09:26:32 -08:00
clockdomains2420_data.c
clockdomains2430_data.c
cm-regbits-7xx.h
cm-regbits-24xx.h ARM: OMAP2: convert sys_ck and osc_ck to standard clock types 2014-07-02 14:26:06 +03:00
cm-regbits-33xx.h
cm-regbits-34xx.h ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver 2014-07-06 15:51:23 -06:00
cm-regbits-44xx.h
cm-regbits-54xx.h
cm.h ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable 2014-10-27 08:39:24 -07:00
cm1_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm1_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_7xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_44xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2_54xx.h ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions 2014-10-27 08:39:25 -07:00
cm2xxx.c ARM: OMAP2: CM: remove unused PLL functions 2015-01-07 14:27:39 -08:00
cm2xxx.h ARM: OMAP2: CM: remove unused PLL functions 2015-01-07 14:27:39 -08:00
cm2xxx_3xxx.h ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
cm3xxx.c ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static 2014-10-27 08:39:24 -07:00
cm3xxx.h ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static 2014-10-27 08:39:24 -07:00
cm33xx.c ARM: OMAP2+: cm33xx.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
cm33xx.h ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable 2014-10-27 08:39:24 -07:00
cm44xx.h ARM: OMAP4: CM: move public definitions from cminst44xx.h to cm44xx.h 2014-10-27 08:39:25 -07:00
cm81xx.h ARM: OMAP2+: Add clock domain support for dm816x 2015-01-26 09:26:32 -08:00
cm_common.c ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable 2014-10-27 08:39:24 -07:00
cminst44xx.c ARM: OMAP4: CM: make cminst direct register access functions static 2014-10-27 08:39:25 -07:00
common-board-devices.c
common-board-devices.h arm: omap2: n8x0: move i2c devices to DT 2014-09-16 14:43:11 -07:00
common.c ARM: OMAP2+: remove DSP platform device 2014-07-15 21:01:05 -07:00
common.h ARM: SoC non-critical fixes 2015-02-17 09:15:46 -08:00
control.c ARM: OMAP3: Fix coding style problems in arch/arm/mach-omap2/control.c 2014-08-01 01:21:14 -07:00
control.h ARM: SoC non-critical fixes 2015-02-17 09:15:46 -08:00
cpuidle34xx.c cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic 2014-11-12 21:17:27 +01:00
cpuidle44xx.c cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic 2014-11-12 21:17:27 +01:00
ctrl_module_wkup_44xx.h
devices.c media updates for v3.19-rc1 2014-12-11 11:49:23 -08:00
devices.h
display.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
display.h ARM: OMAP2+: add omapdss_init_of() 2014-03-19 10:52:23 +02:00
dma.c ARM: OMAP2+: DMA: remove requirement of irq for platform-dma driver 2014-07-21 23:32:51 -07:00
dpll3xxx.c clk: Add rate constraints to clocks 2015-02-02 14:23:42 -08:00
dpll44xx.c The clock framework changes for 3.20 contain the usual driver additions, 2015-02-21 12:30:30 -08:00
drm.c
dss-common.c ARM: OMAP2+: remove pdata quirks for displays 2014-04-04 09:55:18 +03:00
dss-common.h
fb.c
gpio.c
gpmc-nand.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
gpmc-onenand.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
gpmc-smsc911x.c
gpmc-smsc911x.h
gpmc.h ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
hdq1w.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
hdq1w.h
hsmmc.c mmc: omap_hsmmc: remove unused slot_id parameter 2014-11-26 14:30:56 +01:00
hsmmc.h mmc: omap_hsmmc: remove unused slot_id parameter 2014-11-26 14:30:56 +01:00
hwspinlock.c
i2c.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
i2c.h
id.c ARM: OMAP2+: Fix ti81xx devtype 2015-01-14 17:37:15 -08:00
id.h
io.c The clock framework changes for 3.20 contain the usual driver additions, 2015-02-21 12:30:30 -08:00
iomap.h
Kconfig ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC 2015-01-20 08:49:08 -08:00
l3_2xxx.h
l3_3xxx.h
l4_2xxx.h
l4_3xxx.h
Makefile The clock framework changes for 3.20 contain the usual driver additions, 2015-02-21 12:30:30 -08:00
Makefile.boot
mcbsp.c
mmc.h ARM: OMAP2: MMC: include mmc-omap platform header directly 2014-11-26 14:30:53 +01:00
msdi.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
mux.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
mux.h ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF 2014-02-28 15:36:34 -08:00
mux34xx.c
mux34xx.h
omap-headsmp.S ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode 2015-01-05 15:48:21 -08:00
omap-hotplug.c ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
omap-iommu.c ARM: omap: Don't set iommu pdata da_start and da_end fields 2014-07-29 12:39:23 +02:00
omap-mpuss-lowpower.c ARM: OMAP4+: PM: Program CPU logic power state 2014-11-10 16:02:05 -08:00
omap-pm-noop.c ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-pm.h ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
omap-secure.c
omap-secure.h ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default 2014-09-08 11:38:41 -05:00
omap-smc.S
omap-smp.c ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode 2015-01-05 15:48:21 -08:00
omap-wakeupgen.c ARM: OMAP5 / DRA7: Enable CPU RET on suspend 2014-09-08 11:38:43 -05:00
omap-wakeupgen.h ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default 2014-09-08 11:38:41 -05:00
omap2-restart.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
omap3-restart.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
omap4-common.c ARM: make of_device_ids const 2015-02-19 09:44:25 +01:00
omap4-restart.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
omap4-sar-layout.h
omap24xx.h
omap34xx.h
omap44xx.h
omap54xx.h
omap_device.c ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM 2014-12-13 00:42:49 +01:00
omap_device.h
omap_hwmod.c ARM: omap2+: omap_hwmod: Set unique lock_class_key per hwmod 2015-02-26 00:00:51 -07:00
omap_hwmod.h ARM: omap2+: omap_hwmod: Set unique lock_class_key per hwmod 2015-02-26 00:00:51 -07:00
omap_hwmod_2xxx_3xxx_interconnect_data.c ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
omap_hwmod_2xxx_interconnect_data.c
omap_hwmod_2xxx_ipblock_data.c
omap_hwmod_3xxx_data.c ARM: OMAP3: Remove legacy support for am35xx-emac 2015-01-13 09:00:38 -08:00
omap_hwmod_7xx_data.c ARM: DRA7: hwmod_data: Fix hwmod data for pcie 2015-02-26 00:02:28 -07:00
omap_hwmod_33xx_43xx_common_data.h
omap_hwmod_33xx_43xx_interconnect_data.c ARM: AM33xx: hwmod_data: Remove legacy mailbox addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_33xx_43xx_ipblock_data.c ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver 2014-11-26 14:30:53 +01:00
omap_hwmod_33xx_data.c ARM: OMAP2: MMC: include mmc-omap platform header directly 2014-11-26 14:30:53 +01:00
omap_hwmod_43xx_data.c ARM: AM43xx: hwmod: set DSS submodule parent hwmods 2015-01-20 18:12:17 -07:00
omap_hwmod_44xx_data.c ARM: OMAP: Work around hardcoded interrupts 2015-01-17 08:56:12 -08:00
omap_hwmod_54xx_data.c ARM: OMAP: Work around hardcoded interrupts 2015-01-17 08:56:12 -08:00
omap_hwmod_81xx_data.c ARM: OMAP2+: Add dm816x hwmod support 2015-01-26 09:26:32 -08:00
omap_hwmod_2420_data.c ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_2430_data.c ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver 2014-11-26 14:30:53 +01:00
omap_hwmod_common_data.c
omap_hwmod_common_data.h ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs 2014-07-15 05:08:56 -07:00
omap_hwmod_common_ipblock_data.c ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
omap_hwmod_reset.c
omap_opp_data.h
omap_phy_internal.c ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
omap_twl.c mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree 2014-04-23 15:31:05 +01:00
opp.c
opp2xxx.h
opp3xxx_data.c
opp4xxx_data.c
opp2420_data.c
opp2430_data.c
pdata-quirks.c ARM: OMAP3: Remove legacy support for am35xx-emac 2015-01-13 09:00:38 -08:00
pm-debug.c
pm.c cpufreq: cpu0: rename driver and internals to 'cpufreq_dt' 2014-10-03 15:37:54 +02:00
pm.h ARM: OMAP5 / DRA7: Enable CPU RET on suspend 2014-09-08 11:38:43 -05:00
pm24xx.c ARM: SoC device-tree changes for 3.17 2014-08-08 11:16:58 -07:00
pm34xx.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header 2014-11-20 12:11:25 -08:00
pm44xx.c ARM: OMAP4+: PM: Centralize static dependency mapping table 2014-11-10 16:01:40 -08:00
pmu.c arm: omap: specify PMUs are for ARMv7 CPUs 2015-02-06 00:13:06 -08:00
powerdomain-common.c ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files 2014-05-15 22:35:10 -06:00
powerdomain.c ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
powerdomain.h ARM: OMAP2+: powerdomain.c: Remove some unused functions 2015-01-07 09:53:51 -08:00
powerdomains2xxx_3xxx_data.c
powerdomains2xxx_3xxx_data.h
powerdomains2xxx_data.c
powerdomains3xxx_data.c ARM: OMAP2+: Fix ti81xx class type 2015-01-14 17:37:16 -08:00
powerdomains7xx_data.c ARM: OMAP: DRA7: powerdomain data: fix powerdomain powerstate 2014-09-08 11:22:31 -05:00
powerdomains33xx_data.c
powerdomains43xx_data.c
powerdomains44xx_data.c
powerdomains54xx_data.c ARM: OMAP5: powerdomain data: fix powerdomain powerstate 2014-09-08 11:22:40 -05:00
prcm-common.h ARM: OMAP: Work around hardcoded interrupts 2015-01-17 08:56:12 -08:00
prcm43xx.h ARM: AM43xx: hwmod: add DSS hwmod data 2014-07-05 17:44:57 -06:00
prcm44xx.h
prcm_mpu7xx.h
prcm_mpu44xx.c ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
prcm_mpu44xx.h ARM: OMAP2+: PRCM: cleanup some header includes 2014-05-15 22:34:48 -06:00
prcm_mpu54xx.h
prcm_mpu_44xx_54xx.h
prm-regbits-24xx.h
prm-regbits-33xx.h
prm-regbits-34xx.h ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver 2014-07-06 15:51:23 -06:00
prm-regbits-44xx.h
prm.h ARM: OMAP3: PRM: add support for legacy iomapping init 2015-01-30 10:55:23 -08:00
prm2xxx.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
prm2xxx.h ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
prm2xxx_3xxx.c ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm2xxx_3xxx.h ARM: OMAP2+: PRM: add generic API for checking hardreset status 2014-10-27 08:39:25 -07:00
prm3xxx.c ARM: make of_device_ids const 2015-02-19 09:44:25 +01:00
prm3xxx.h ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers 2015-01-07 14:27:39 -08:00
prm7xx.h arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy 2014-07-22 14:35:05 -06:00
prm33xx.c ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
prm33xx.h ARM: OMAP2+: PRM: provide generic API for system reset 2014-10-27 08:39:26 -07:00
prm44xx.c ARM: make of_device_ids const 2015-02-19 09:44:25 +01:00
prm44xx.h
prm44xx_54xx.h ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers 2015-01-07 14:27:39 -08:00
prm54xx.h
prm_common.c The clock framework changes for 3.20 contain the usual driver additions, 2015-02-21 12:30:30 -08:00
prminst44xx.c ARM: OMAP2+: PRM: add generic API for deasserting hardware reset 2014-10-27 08:39:25 -07:00
prminst44xx.h ARM: OMAP2+: PRM: add generic API for deasserting hardware reset 2014-10-27 08:39:25 -07:00
scrm44xx.h
scrm54xx.h
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-nokia.c
sdram-nokia.h
sdram-numonyx-m65kxxxxam.h
sdram-qimonda-hyb18m512160af-6.h
sdrc.c
sdrc.h ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
sdrc2xxx.c ARM: OMAP2+: raw read and write endian fix 2014-05-08 07:09:53 -07:00
serial.c ARM: OMAP: serial: remove last vestige of DTR_gpio support. 2014-11-10 09:06:44 -08:00
serial.h
sleep24xx.S
sleep34xx.S
sleep44xx.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
smartreflex-class3.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
soc.h ARM: OMAP2+: Fix ti81xx class type 2015-01-14 17:37:16 -08:00
sr_device.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
sram.c ARM: OMAP4+: Remove static iotable mappings for SRAM 2014-09-18 09:47:35 -07:00
sram.h ARM: OMAP4+: Remove static iotable mappings for SRAM 2014-09-18 09:47:35 -07:00
sram34xx.S
sram242x.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
sram243x.S ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+ 2014-07-18 12:29:04 +01:00
ti81xx-restart.c ARM: OMAP2+: Fix reboot for 81xx 2015-01-14 17:37:16 -08:00
ti81xx.h
timer.c ARM: SoC non-critical fixes 2015-02-17 09:15:46 -08:00
twl-common.c ARM: OMAP: Work around hardcoded interrupts 2015-01-17 08:56:12 -08:00
twl-common.h
usb-host.c usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h> 2014-04-21 14:07:24 -05:00
usb-musb.c ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
usb-tusb6010.c ARM: omap2+: usb-tusb6010.c: Cleaning up variable is set more than once 2014-07-07 04:52:31 -07:00
usb.h ARM: OMAP2+: Remove unused ti81xx platform init code 2015-01-14 17:21:00 -08:00
vc.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
vc.h ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode 2014-05-06 13:48:35 -07:00
vc3xxx_data.c
vc44xx_data.c
voltage.c ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
voltage.h ARM: OMAP2+: voltage: Remove some unused functions 2015-01-07 09:53:51 -08:00
voltagedomains2xxx_data.c
voltagedomains3xxx_data.c
voltagedomains44xx_data.c
voltagedomains54xx_data.c
vp.c
vp.h
vp3xxx_data.c
vp44xx_data.c
wd_timer.c arm: mach-omap2: Convert pr_warning to pr_warn 2014-09-18 09:53:57 -07:00
wd_timer.h