alistair23-linux/drivers/usb
Deepa Dinamani 078cd8279e fs: Replace CURRENT_TIME with current_time() for inode timestamps
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_time() instead.

CURRENT_TIME is also not y2038 safe.

This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks. Hence, it is necessary for all
file system timestamps to use current_time(). Also,
current_time() will be transitioned along with vfs to be
y2038 safe.

Note that whenever a single call to current_time() is used
to change timestamps in different inodes, it is because they
share the same time granularity.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:06:21 -04:00
..
atm
c67x00
chipidea usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase 2016-09-09 17:19:57 +08:00
class cdc-acm: fix wrong pipe type on rx interrupt xfers 2016-08-15 16:30:56 +02:00
common Merge 4.7-rc6 into usb-next 2016-07-04 08:19:21 -07:00
core fs: Replace CURRENT_TIME with current_time() for inode timestamps 2016-09-27 21:06:21 -04:00
dwc2 usb: dwc2: Add reset control to dwc2 2016-08-22 10:45:11 +03:00
dwc3 usb: dwc3: pci: fix build warning on !PM_SLEEP 2016-09-07 15:37:36 +03:00
early usb: early/ehci-dbgp: make it explicitly non-modular 2016-06-26 11:48:18 -07:00
gadget fs: Replace CURRENT_TIME with current_time() for inode timestamps 2016-09-27 21:06:21 -04:00
host xhci: fix null pointer dereference in stop command timeout function 2016-09-08 08:39:46 +02:00
image
isp1760
misc usb: misc: usbtest: add fix for driver hang 2016-08-11 18:31:51 +02:00
mon
musb usb: musb: Fix locking errors for host only mode 2016-08-30 14:11:38 +02:00
phy usb: phy: phy-generic: Check clk_prepare_enable() error 2016-09-05 13:39:23 +03:00
renesas_usbhs usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition 2016-09-05 13:39:23 +03:00
serial USB: serial: option: add WeTelecom 0x6802 and 0x6803 products 2016-08-24 14:13:40 +02:00
storage
usbip
wusbcore
Kconfig
Makefile
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.