redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/clk/ingenic/jz4780-cgu.c
Linus Torvalds 916f562fb2 This round of clk driver and framework updates is heavy on the driver update 
side. The two main highlights in the core framework are the addition of an bulk
 clk_get API that handles optional clks and an extra debugfs file that tells the
 developer about the current parent of a clk.
 
 The driver updates are dominated by i.MX in the diffstat, but that is mostly
 because that SoC has started converting to the clk_hw style of clk
 registration. The next big update is in the Amlogic meson clk driver that
 gained some support for audio, cpu, and temperature clks while fixing some PLL
 issues. Finally, the biggest thing that stands out is the conversion of a large
 part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses
 less strings and more pointer comparisons to match clk parents and children up.
 
 In general, it looks like we have a lot of little fixes and tweaks here and
 there to clk data along with the normal addition of a handful of new drivers
 and a couple new core framework features.
 
 Core:
  - Add a 'clk_parent' file in clk debugfs
  - Add a clk_bulk_get_optional() API (with devm too)
 
 New Drivers:
  - Support gated clk controller on MIPS based BCM63XX SoCs
  - Support SiLabs Si5341 and Si5340 chips
  - Support for CPU clks on Raspberry Pi devices
  - Audsys clock driver for MediaTek MT8516 SoCs
 
 Updates:
  - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
  - Small frequency support for SiLabs Si544 chips
  - Slow clk support for AT91 SAM9X60 SoCs
  - Remove dead code in various clk drivers (-Wunused)
  - Support for Marvell 98DX1135 SoCs
  - Get duty cycle of generic pwm clks
  - Improvement in mmc phase calculation and cleanup of some rate defintions
  - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
  - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
  - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
  - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
  - Add clks for new Exynos5422 Dynamic Memory Controller driver
  - Clock definition for Exynos4412 Mali
  - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
  - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
  - TI clock probing done from DT by default instead of firmware
  - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
  - Add Amlogic meson8 audio clocks
  - Add Amlogic g12a temperature sensors clocks
  - Add Amlogic g12a and g12b cpu clocks
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
  - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
  - Add Clock Domain support on Renesas RZ/N1
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0uBEERHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSWucw/9ELKlfvdxrc8mdIuzt+CpKdNiSG88shXY
 hF+vnuE6Jhv5hmlbA/DbplPTAnHT/FQF65/GPQMAYy2wYO6CjleNxQyepiVv4h8/
 tWoXu5vYZXubtQyMnYTffREzjYFPBNAscLUhXNwJKRno7nT0qKCk62WgOMfaW/KN
 lP5dKmrL7rdJDUvxHEStrwP515Lg5Wkhj3+XzgbgFUKGuGlvHfwUOEZucT++kqhu
 Z1vMjPv2ksHQf3r15BsbX/6jMIONEt2Xd6jA3Lm7ebDXJl2hjX4Gq0Kkl5pmkj2w
 F0V7Tw4XYk6DkSl7HQaOBgQ8KV0Mw2L8Vj6eEDhUwx6wPGlQ5YTKkUCJkjs0mUyb
 UpO3TuPFN2W0hsTNDzwYpjqcfodDn159XJcduv1/ZpIanUvHgx0uVzQ7iwwYwW+l
 VR4SipY5AEn9hpief30X7TAUSKsE4do58imYeoGBrq78zdsJaEcDAMX7AcYdXVQ9
 ahBS8ME/d1JEBNdRsSW7eTAfu8dZdI08uR8/T37GRG59XyZSjsyVmZ6kHCYrBygF
 AyLNMsXMCbW1rOoIpWkuGMD86XZy40laLg8T7WWTaq28t1VQ0BaBTGM4/eEexs3p
 FhZ1M7aH+PsDLrI2IGTBt/4xAMv+dhDS7HnxRlOONbWnLWVqmR+tYzF0aCkqJCmd
 O2zWCGffeYs=
 =mK0C
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round of clk driver and framework updates is heavy on the driver
  update side. The two main highlights in the core framework are the
  addition of an bulk clk_get API that handles optional clks and an
  extra debugfs file that tells the developer about the current parent
  of a clk.

  The driver updates are dominated by i.MX in the diffstat, but that is
  mostly because that SoC has started converting to the clk_hw style of
  clk registration. The next big update is in the Amlogic meson clk
  driver that gained some support for audio, cpu, and temperature clks
  while fixing some PLL issues. Finally, the biggest thing that stands
  out is the conversion of a large part of the Allwinner sunxi-ng driver
  to the new clk parent scheme that uses less strings and more pointer
  comparisons to match clk parents and children up.

  In general, it looks like we have a lot of little fixes and tweaks
  here and there to clk data along with the normal addition of a handful
  of new drivers and a couple new core framework features.

  Core:
   - Add a 'clk_parent' file in clk debugfs
   - Add a clk_bulk_get_optional() API (with devm too)

  New Drivers:
   - Support gated clk controller on MIPS based BCM63XX SoCs
   - Support SiLabs Si5341 and Si5340 chips
   - Support for CPU clks on Raspberry Pi devices
   - Audsys clock driver for MediaTek MT8516 SoCs

  Updates:
   - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
   - Small frequency support for SiLabs Si544 chips
   - Slow clk support for AT91 SAM9X60 SoCs
   - Remove dead code in various clk drivers (-Wunused)
   - Support for Marvell 98DX1135 SoCs
   - Get duty cycle of generic pwm clks
   - Improvement in mmc phase calculation and cleanup of some rate defintions
   - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
   - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
   - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
   - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
   - Add clks for new Exynos5422 Dynamic Memory Controller driver
   - Clock definition for Exynos4412 Mali
   - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
   - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
   - TI clock probing done from DT by default instead of firmware
   - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
   - Add Amlogic meson8 audio clocks
   - Add Amlogic g12a temperature sensors clocks
   - Add Amlogic g12a and g12b cpu clocks
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
   - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
   - Add Clock Domain support on Renesas RZ/N1"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
  clk: consoldiate the __clk_get_hw() declarations
  clk: sprd: Add check for return value of sprd_clk_regmap_init()
  clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
  clk: Add Si5341/Si5340 driver
  dt-bindings: clock: Add silabs,si5341
  clk: clk-si544: Implement small frequency change support
  clk: add BCM63XX gated clock controller driver
  devicetree: document the BCM63XX gated clock bindings
  clk: at91: sckc: use dedicated functions to unregister clock
  clk: at91: sckc: improve error path for sama5d4 sck registration
  clk: at91: sckc: remove unnecessary line
  clk: at91: sckc: improve error path for sam9x5 sck register
  clk: at91: sckc: add support to free slow clock osclillator
  clk: at91: sckc: add support to free slow rc oscillator
  clk: at91: sckc: add support to free slow oscillator
  clk: rockchip: export HDMIPHY clock on rk3228
  clk: rockchip: add watchdog pclk on rk3328
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  clk: at91: sckc: add support for SAM9X60
  ...
2019-07-17 10:07:48 -07:00

729 lines
17 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Ingenic JZ4780 SoC CGU driver
*
* Copyright (c) 2013-2015 Imagination Technologies
* Author: Paul Burton <paul.burton@mips.com>
*/
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/of.h>
#include <dt-bindings/clock/jz4780-cgu.h>
#include "cgu.h"
#include "pm.h"
/* CGU register offsets */
#define CGU_REG_CLOCKCONTROL 0x00
#define CGU_REG_PLLCONTROL 0x0c
#define CGU_REG_APLL 0x10
#define CGU_REG_MPLL 0x14
#define CGU_REG_EPLL 0x18
#define CGU_REG_VPLL 0x1c
#define CGU_REG_CLKGR0 0x20
#define CGU_REG_OPCR 0x24
#define CGU_REG_CLKGR1 0x28
#define CGU_REG_DDRCDR 0x2c
#define CGU_REG_VPUCDR 0x30
#define CGU_REG_USBPCR 0x3c
#define CGU_REG_USBRDT 0x40
#define CGU_REG_USBVBFIL 0x44
#define CGU_REG_USBPCR1 0x48
#define CGU_REG_LP0CDR 0x54
#define CGU_REG_I2SCDR 0x60
#define CGU_REG_LP1CDR 0x64
#define CGU_REG_MSC0CDR 0x68
#define CGU_REG_UHCCDR 0x6c
#define CGU_REG_SSICDR 0x74
#define CGU_REG_CIMCDR 0x7c
#define CGU_REG_PCMCDR 0x84
#define CGU_REG_GPUCDR 0x88
#define CGU_REG_HDMICDR 0x8c
#define CGU_REG_MSC1CDR 0xa4
#define CGU_REG_MSC2CDR 0xa8
#define CGU_REG_BCHCDR 0xac
#define CGU_REG_CLOCKSTATUS 0xd4
/* bits within the OPCR register */
#define OPCR_SPENDN0 (1 << 7)
#define OPCR_SPENDN1 (1 << 6)
/* bits within the USBPCR register */
#define USBPCR_USB_MODE BIT(31)
#define USBPCR_IDPULLUP_MASK (0x3 << 28)
#define USBPCR_COMMONONN BIT(25)
#define USBPCR_VBUSVLDEXT BIT(24)
#define USBPCR_VBUSVLDEXTSEL BIT(23)
#define USBPCR_POR BIT(22)
#define USBPCR_OTG_DISABLE BIT(20)
#define USBPCR_COMPDISTUNE_MASK (0x7 << 17)
#define USBPCR_OTGTUNE_MASK (0x7 << 14)
#define USBPCR_SQRXTUNE_MASK (0x7 << 11)
#define USBPCR_TXFSLSTUNE_MASK (0xf << 7)
#define USBPCR_TXPREEMPHTUNE BIT(6)
#define USBPCR_TXHSXVTUNE_MASK (0x3 << 4)
#define USBPCR_TXVREFTUNE_MASK 0xf
/* bits within the USBPCR1 register */
#define USBPCR1_REFCLKSEL_SHIFT 26
#define USBPCR1_REFCLKSEL_MASK (0x3 << USBPCR1_REFCLKSEL_SHIFT)
#define USBPCR1_REFCLKSEL_CORE (0x2 << USBPCR1_REFCLKSEL_SHIFT)
#define USBPCR1_REFCLKDIV_SHIFT 24
#define USBPCR1_REFCLKDIV_MASK (0x3 << USBPCR1_REFCLKDIV_SHIFT)
#define USBPCR1_REFCLKDIV_19_2 (0x3 << USBPCR1_REFCLKDIV_SHIFT)
#define USBPCR1_REFCLKDIV_48 (0x2 << USBPCR1_REFCLKDIV_SHIFT)
#define USBPCR1_REFCLKDIV_24 (0x1 << USBPCR1_REFCLKDIV_SHIFT)
#define USBPCR1_REFCLKDIV_12 (0x0 << USBPCR1_REFCLKDIV_SHIFT)
#define USBPCR1_USB_SEL BIT(28)
#define USBPCR1_WORD_IF0 BIT(19)
#define USBPCR1_WORD_IF1 BIT(18)
/* bits within the USBRDT register */
#define USBRDT_VBFIL_LD_EN BIT(25)
#define USBRDT_USBRDT_MASK 0x7fffff
/* bits within the USBVBFIL register */
#define USBVBFIL_IDDIGFIL_SHIFT 16
#define USBVBFIL_IDDIGFIL_MASK (0xffff << USBVBFIL_IDDIGFIL_SHIFT)
#define USBVBFIL_USBVBFIL_MASK (0xffff)
static struct ingenic_cgu *cgu;
static u8 jz4780_otg_phy_get_parent(struct clk_hw *hw)
{
/* we only use CLKCORE, revisit if that ever changes */
return 0;
}
static int jz4780_otg_phy_set_parent(struct clk_hw *hw, u8 idx)
{
unsigned long flags;
u32 usbpcr1;
if (idx > 0)
return -EINVAL;
spin_lock_irqsave(&cgu->lock, flags);
usbpcr1 = readl(cgu->base + CGU_REG_USBPCR1);
usbpcr1 &= ~USBPCR1_REFCLKSEL_MASK;
/* we only use CLKCORE */
usbpcr1 |= USBPCR1_REFCLKSEL_CORE;
writel(usbpcr1, cgu->base + CGU_REG_USBPCR1);
spin_unlock_irqrestore(&cgu->lock, flags);
return 0;
}
static unsigned long jz4780_otg_phy_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
u32 usbpcr1;
unsigned refclk_div;
usbpcr1 = readl(cgu->base + CGU_REG_USBPCR1);
refclk_div = usbpcr1 & USBPCR1_REFCLKDIV_MASK;
switch (refclk_div) {
case USBPCR1_REFCLKDIV_12:
return 12000000;
case USBPCR1_REFCLKDIV_24:
return 24000000;
case USBPCR1_REFCLKDIV_48:
return 48000000;
case USBPCR1_REFCLKDIV_19_2:
return 19200000;
}
BUG();
return parent_rate;
}
static long jz4780_otg_phy_round_rate(struct clk_hw *hw, unsigned long req_rate,
unsigned long *parent_rate)
{
if (req_rate < 15600000)
return 12000000;
if (req_rate < 21600000)
return 19200000;
if (req_rate < 36000000)
return 24000000;
return 48000000;
}
static int jz4780_otg_phy_set_rate(struct clk_hw *hw, unsigned long req_rate,
unsigned long parent_rate)
{
unsigned long flags;
u32 usbpcr1, div_bits;
switch (req_rate) {
case 12000000:
div_bits = USBPCR1_REFCLKDIV_12;
break;
case 19200000:
div_bits = USBPCR1_REFCLKDIV_19_2;
break;
case 24000000:
div_bits = USBPCR1_REFCLKDIV_24;
break;
case 48000000:
div_bits = USBPCR1_REFCLKDIV_48;
break;
default:
return -EINVAL;
}
spin_lock_irqsave(&cgu->lock, flags);
usbpcr1 = readl(cgu->base + CGU_REG_USBPCR1);
usbpcr1 &= ~USBPCR1_REFCLKDIV_MASK;
usbpcr1 |= div_bits;
writel(usbpcr1, cgu->base + CGU_REG_USBPCR1);
spin_unlock_irqrestore(&cgu->lock, flags);
return 0;
}
static const struct clk_ops jz4780_otg_phy_ops = {
.get_parent = jz4780_otg_phy_get_parent,
.set_parent = jz4780_otg_phy_set_parent,
.recalc_rate = jz4780_otg_phy_recalc_rate,
.round_rate = jz4780_otg_phy_round_rate,
.set_rate = jz4780_otg_phy_set_rate,
};
static const s8 pll_od_encoding[16] = {
0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf,
};
static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
/* External clocks */
[JZ4780_CLK_EXCLK] = { "ext", CGU_CLK_EXT },
[JZ4780_CLK_RTCLK] = { "rtc", CGU_CLK_EXT },
/* PLLs */
#define DEF_PLL(name) { \
.reg = CGU_REG_ ## name, \
.m_shift = 19, \
.m_bits = 13, \
.m_offset = 1, \
.n_shift = 13, \
.n_bits = 6, \
.n_offset = 1, \
.od_shift = 9, \
.od_bits = 4, \
.od_max = 16, \
.od_encoding = pll_od_encoding, \
.stable_bit = 6, \
.bypass_bit = 1, \
.enable_bit = 0, \
}
[JZ4780_CLK_APLL] = {
"apll", CGU_CLK_PLL,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.pll = DEF_PLL(APLL),
},
[JZ4780_CLK_MPLL] = {
"mpll", CGU_CLK_PLL,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.pll = DEF_PLL(MPLL),
},
[JZ4780_CLK_EPLL] = {
"epll", CGU_CLK_PLL,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.pll = DEF_PLL(EPLL),
},
[JZ4780_CLK_VPLL] = {
"vpll", CGU_CLK_PLL,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.pll = DEF_PLL(VPLL),
},
#undef DEF_PLL
/* Custom (SoC-specific) OTG PHY */
[JZ4780_CLK_OTGPHY] = {
"otg_phy", CGU_CLK_CUSTOM,
.parents = { -1, -1, JZ4780_CLK_EXCLK, -1 },
.custom = { &jz4780_otg_phy_ops },
},
/* Muxes & dividers */
[JZ4780_CLK_SCLKA] = {
"sclk_a", CGU_CLK_MUX,
.parents = { -1, JZ4780_CLK_APLL, JZ4780_CLK_EXCLK,
JZ4780_CLK_RTCLK },
.mux = { CGU_REG_CLOCKCONTROL, 30, 2 },
},
[JZ4780_CLK_CPUMUX] = {
"cpumux", CGU_CLK_MUX,
.parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
JZ4780_CLK_EPLL },
.mux = { CGU_REG_CLOCKCONTROL, 28, 2 },
},
[JZ4780_CLK_CPU] = {
"cpu", CGU_CLK_DIV,
.parents = { JZ4780_CLK_CPUMUX, -1, -1, -1 },
.div = { CGU_REG_CLOCKCONTROL, 0, 1, 4, 22, -1, -1 },
},
[JZ4780_CLK_L2CACHE] = {
"l2cache", CGU_CLK_DIV,
.parents = { JZ4780_CLK_CPUMUX, -1, -1, -1 },
.div = { CGU_REG_CLOCKCONTROL, 4, 1, 4, -1, -1, -1 },
},
[JZ4780_CLK_AHB0] = {
"ahb0", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
JZ4780_CLK_EPLL },
.mux = { CGU_REG_CLOCKCONTROL, 26, 2 },
.div = { CGU_REG_CLOCKCONTROL, 8, 1, 4, 21, -1, -1 },
},
[JZ4780_CLK_AHB2PMUX] = {
"ahb2_apb_mux", CGU_CLK_MUX,
.parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
JZ4780_CLK_RTCLK },
.mux = { CGU_REG_CLOCKCONTROL, 24, 2 },
},
[JZ4780_CLK_AHB2] = {
"ahb2", CGU_CLK_DIV,
.parents = { JZ4780_CLK_AHB2PMUX, -1, -1, -1 },
.div = { CGU_REG_CLOCKCONTROL, 12, 1, 4, 20, -1, -1 },
},
[JZ4780_CLK_PCLK] = {
"pclk", CGU_CLK_DIV,
.parents = { JZ4780_CLK_AHB2PMUX, -1, -1, -1 },
.div = { CGU_REG_CLOCKCONTROL, 16, 1, 4, 20, -1, -1 },
},
[JZ4780_CLK_DDR] = {
"ddr", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL, -1 },
.mux = { CGU_REG_DDRCDR, 30, 2 },
.div = { CGU_REG_DDRCDR, 0, 1, 4, 29, 28, 27 },
},
[JZ4780_CLK_VPU] = {
"vpu", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
JZ4780_CLK_EPLL, -1 },
.mux = { CGU_REG_VPUCDR, 30, 2 },
.div = { CGU_REG_VPUCDR, 0, 1, 4, 29, 28, 27 },
.gate = { CGU_REG_CLKGR1, 2 },
},
[JZ4780_CLK_I2SPLL] = {
"i2s_pll", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_EPLL, -1, -1 },
.mux = { CGU_REG_I2SCDR, 30, 1 },
.div = { CGU_REG_I2SCDR, 0, 1, 8, 29, 28, 27 },
},
[JZ4780_CLK_I2S] = {
"i2s", CGU_CLK_MUX,
.parents = { JZ4780_CLK_EXCLK, JZ4780_CLK_I2SPLL, -1, -1 },
.mux = { CGU_REG_I2SCDR, 31, 1 },
},
[JZ4780_CLK_LCD0PIXCLK] = {
"lcd0pixclk", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
JZ4780_CLK_VPLL, -1 },
.mux = { CGU_REG_LP0CDR, 30, 2 },
.div = { CGU_REG_LP0CDR, 0, 1, 8, 28, 27, 26 },
},
[JZ4780_CLK_LCD1PIXCLK] = {
"lcd1pixclk", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
JZ4780_CLK_VPLL, -1 },
.mux = { CGU_REG_LP1CDR, 30, 2 },
.div = { CGU_REG_LP1CDR, 0, 1, 8, 28, 27, 26 },
},
[JZ4780_CLK_MSCMUX] = {
"msc_mux", CGU_CLK_MUX,
.parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL, -1 },
.mux = { CGU_REG_MSC0CDR, 30, 2 },
},
[JZ4780_CLK_MSC0] = {
"msc0", CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4780_CLK_MSCMUX, -1, -1, -1 },
.div = { CGU_REG_MSC0CDR, 0, 2, 8, 29, 28, 27 },
.gate = { CGU_REG_CLKGR0, 3 },
},
[JZ4780_CLK_MSC1] = {
"msc1", CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4780_CLK_MSCMUX, -1, -1, -1 },
.div = { CGU_REG_MSC1CDR, 0, 2, 8, 29, 28, 27 },
.gate = { CGU_REG_CLKGR0, 11 },
},
[JZ4780_CLK_MSC2] = {
"msc2", CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4780_CLK_MSCMUX, -1, -1, -1 },
.div = { CGU_REG_MSC2CDR, 0, 2, 8, 29, 28, 27 },
.gate = { CGU_REG_CLKGR0, 12 },
},
[JZ4780_CLK_UHC] = {
"uhc", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
JZ4780_CLK_EPLL, JZ4780_CLK_OTGPHY },
.mux = { CGU_REG_UHCCDR, 30, 2 },
.div = { CGU_REG_UHCCDR, 0, 1, 8, 29, 28, 27 },
.gate = { CGU_REG_CLKGR0, 24 },
},
[JZ4780_CLK_SSIPLL] = {
"ssi_pll", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL, -1, -1 },
.mux = { CGU_REG_SSICDR, 30, 1 },
.div = { CGU_REG_SSICDR, 0, 1, 8, 29, 28, 27 },
},
[JZ4780_CLK_SSI] = {
"ssi", CGU_CLK_MUX,
.parents = { JZ4780_CLK_EXCLK, JZ4780_CLK_SSIPLL, -1, -1 },
.mux = { CGU_REG_SSICDR, 31, 1 },
},
[JZ4780_CLK_CIMMCLK] = {
"cim_mclk", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL, -1, -1 },
.mux = { CGU_REG_CIMCDR, 31, 1 },
.div = { CGU_REG_CIMCDR, 0, 1, 8, 30, 29, 28 },
},
[JZ4780_CLK_PCMPLL] = {
"pcm_pll", CGU_CLK_MUX | CGU_CLK_DIV,
.parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
JZ4780_CLK_EPLL, JZ4780_CLK_VPLL },
.mux = { CGU_REG_PCMCDR, 29, 2 },
.div = { CGU_REG_PCMCDR, 0, 1, 8, 28, 27, 26 },
},
[JZ4780_CLK_PCM] = {
"pcm", CGU_CLK_MUX | CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, JZ4780_CLK_PCMPLL, -1, -1 },
.mux = { CGU_REG_PCMCDR, 31, 1 },
.gate = { CGU_REG_CLKGR1, 3 },
},
[JZ4780_CLK_GPU] = {
"gpu", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
JZ4780_CLK_EPLL },
.mux = { CGU_REG_GPUCDR, 30, 2 },
.div = { CGU_REG_GPUCDR, 0, 1, 4, 29, 28, 27 },
.gate = { CGU_REG_CLKGR1, 4 },
},
[JZ4780_CLK_HDMI] = {
"hdmi", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
JZ4780_CLK_VPLL, -1 },
.mux = { CGU_REG_HDMICDR, 30, 2 },
.div = { CGU_REG_HDMICDR, 0, 1, 8, 29, 28, 26 },
.gate = { CGU_REG_CLKGR1, 9 },
},
[JZ4780_CLK_BCH] = {
"bch", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { -1, JZ4780_CLK_SCLKA, JZ4780_CLK_MPLL,
JZ4780_CLK_EPLL },
.mux = { CGU_REG_BCHCDR, 30, 2 },
.div = { CGU_REG_BCHCDR, 0, 1, 4, 29, 28, 27 },
.gate = { CGU_REG_CLKGR0, 1 },
},
/* Gate-only clocks */
[JZ4780_CLK_NEMC] = {
"nemc", CGU_CLK_GATE,
.parents = { JZ4780_CLK_AHB2, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 0 },
},
[JZ4780_CLK_OTG0] = {
"otg0", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 2 },
},
[JZ4780_CLK_SSI0] = {
"ssi0", CGU_CLK_GATE,
.parents = { JZ4780_CLK_SSI, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 4 },
},
[JZ4780_CLK_SMB0] = {
"smb0", CGU_CLK_GATE,
.parents = { JZ4780_CLK_PCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 5 },
},
[JZ4780_CLK_SMB1] = {
"smb1", CGU_CLK_GATE,
.parents = { JZ4780_CLK_PCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 6 },
},
[JZ4780_CLK_SCC] = {
"scc", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 7 },
},
[JZ4780_CLK_AIC] = {
"aic", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 8 },
},
[JZ4780_CLK_TSSI0] = {
"tssi0", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 9 },
},
[JZ4780_CLK_OWI] = {
"owi", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 10 },
},
[JZ4780_CLK_KBC] = {
"kbc", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 13 },
},
[JZ4780_CLK_SADC] = {
"sadc", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 14 },
},
[JZ4780_CLK_UART0] = {
"uart0", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 15 },
},
[JZ4780_CLK_UART1] = {
"uart1", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 16 },
},
[JZ4780_CLK_UART2] = {
"uart2", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 17 },
},
[JZ4780_CLK_UART3] = {
"uart3", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 18 },
},
[JZ4780_CLK_SSI1] = {
"ssi1", CGU_CLK_GATE,
.parents = { JZ4780_CLK_SSI, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 19 },
},
[JZ4780_CLK_SSI2] = {
"ssi2", CGU_CLK_GATE,
.parents = { JZ4780_CLK_SSI, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 20 },
},
[JZ4780_CLK_PDMA] = {
"pdma", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 21 },
},
[JZ4780_CLK_GPS] = {
"gps", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 22 },
},
[JZ4780_CLK_MAC] = {
"mac", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 23 },
},
[JZ4780_CLK_SMB2] = {
"smb2", CGU_CLK_GATE,
.parents = { JZ4780_CLK_PCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 24 },
},
[JZ4780_CLK_CIM] = {
"cim", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 26 },
},
[JZ4780_CLK_LCD] = {
"lcd", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 28 },
},
[JZ4780_CLK_TVE] = {
"tve", CGU_CLK_GATE,
.parents = { JZ4780_CLK_LCD, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 27 },
},
[JZ4780_CLK_IPU] = {
"ipu", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 29 },
},
[JZ4780_CLK_DDR0] = {
"ddr0", CGU_CLK_GATE,
.parents = { JZ4780_CLK_DDR, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 30 },
},
[JZ4780_CLK_DDR1] = {
"ddr1", CGU_CLK_GATE,
.parents = { JZ4780_CLK_DDR, -1, -1, -1 },
.gate = { CGU_REG_CLKGR0, 31 },
},
[JZ4780_CLK_SMB3] = {
"smb3", CGU_CLK_GATE,
.parents = { JZ4780_CLK_PCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 0 },
},
[JZ4780_CLK_TSSI1] = {
"tssi1", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 1 },
},
[JZ4780_CLK_COMPRESS] = {
"compress", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 5 },
},
[JZ4780_CLK_AIC1] = {
"aic1", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 6 },
},
[JZ4780_CLK_GPVLC] = {
"gpvlc", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 7 },
},
[JZ4780_CLK_OTG1] = {
"otg1", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 8 },
},
[JZ4780_CLK_UART4] = {
"uart4", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 10 },
},
[JZ4780_CLK_AHBMON] = {
"ahb_mon", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 11 },
},
[JZ4780_CLK_SMB4] = {
"smb4", CGU_CLK_GATE,
.parents = { JZ4780_CLK_PCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 12 },
},
[JZ4780_CLK_DES] = {
"des", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 13 },
},
[JZ4780_CLK_X2D] = {
"x2d", CGU_CLK_GATE,
.parents = { JZ4780_CLK_EXCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 14 },
},
[JZ4780_CLK_CORE1] = {
"core1", CGU_CLK_GATE,
.parents = { JZ4780_CLK_CPU, -1, -1, -1 },
.gate = { CGU_REG_CLKGR1, 15 },
},
};
static void __init jz4780_cgu_init(struct device_node *np)
{
int retval;
cgu = ingenic_cgu_new(jz4780_cgu_clocks,
ARRAY_SIZE(jz4780_cgu_clocks), np);
if (!cgu) {
pr_err("%s: failed to initialise CGU\n", __func__);
return;
}
retval = ingenic_cgu_register_clocks(cgu);
if (retval) {
pr_err("%s: failed to register CGU Clocks\n", __func__);
return;
}
ingenic_cgu_register_syscore_ops(cgu);
}
CLK_OF_DECLARE(jz4780_cgu, "ingenic,jz4780-cgu", jz4780_cgu_init);
View git blame Copy permalink