alistair23-linux/drivers/scsi/qla2xxx/qla_mr.h
Bart Van Assche 15b7a68c1d scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures
Introduce two structures for the (DMA address, length) combination instead
of using separate structure members for the DMA address and length. This
patch fixes several Coverity complaints about 'cur_dsd' being used to write
outside the bounds of structure members.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29 17:24:51 -04:00

527 lines
13 KiB
C

/*
* QLogic Fibre Channel HBA Driver
* Copyright (c) 2003-2014 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
#ifndef __QLA_MR_H
#define __QLA_MR_H
#include "qla_dsd.h"
/*
* The PCI VendorID and DeviceID for our board.
*/
#define PCI_DEVICE_ID_QLOGIC_ISPF001 0xF001
/* FX00 specific definitions */
#define FX00_COMMAND_TYPE_7 0x07 /* Command Type 7 entry for 7XXX */
struct cmd_type_7_fx00 {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
uint32_t handle; /* System handle. */
uint8_t reserved_0;
uint8_t port_path_ctrl;
uint16_t reserved_1;
__le16 tgt_idx; /* Target Idx. */
uint16_t timeout; /* Command timeout. */
__le16 dseg_count; /* Data segment count. */
uint8_t scsi_rsp_dsd_len;
uint8_t reserved_2;
struct scsi_lun lun; /* LUN (LE). */
uint8_t cntrl_flags;
uint8_t task_mgmt_flags; /* Task management flags. */
uint8_t task;
uint8_t crn;
uint8_t fcp_cdb[MAX_CMDSZ]; /* SCSI command words. */
__le32 byte_count; /* Total byte count. */
struct dsd64 dsd;
};
#define STATUS_TYPE_FX00 0x01 /* Status entry. */
struct sts_entry_fx00 {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
uint32_t handle; /* System handle. */
uint32_t reserved_3; /* System handle. */
__le16 comp_status; /* Completion status. */
uint16_t reserved_0; /* OX_ID used by the firmware. */
__le32 residual_len; /* FW calc residual transfer length. */
uint16_t reserved_1;
uint16_t state_flags; /* State flags. */
uint16_t reserved_2;
__le16 scsi_status; /* SCSI status. */
uint32_t sense_len; /* FCP SENSE length. */
uint8_t data[32]; /* FCP response/sense information. */
};
#define MAX_HANDLE_COUNT 15
#define MULTI_STATUS_TYPE_FX00 0x0D
struct multi_sts_entry_fx00 {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t handle_count;
uint8_t entry_status;
__le32 handles[MAX_HANDLE_COUNT];
};
#define TSK_MGMT_IOCB_TYPE_FX00 0x05
struct tsk_mgmt_entry_fx00 {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define;
uint8_t entry_status; /* Entry Status. */
__le32 handle; /* System handle. */
uint32_t reserved_0;
__le16 tgt_id; /* Target Idx. */
uint16_t reserved_1;
uint16_t reserved_3;
uint16_t reserved_4;
struct scsi_lun lun; /* LUN (LE). */
__le32 control_flags; /* Control Flags. */
uint8_t reserved_2[32];
};
#define ABORT_IOCB_TYPE_FX00 0x08 /* Abort IOCB status. */
struct abort_iocb_entry_fx00 {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
__le32 handle; /* System handle. */
__le32 reserved_0;
__le16 tgt_id_sts; /* Completion status. */
__le16 options;
__le32 abort_handle; /* System handle. */
__le32 reserved_2;
__le16 req_que_no;
uint8_t reserved_1[38];
};
#define IOCTL_IOSB_TYPE_FX00 0x0C
struct ioctl_iocb_entry_fx00 {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System defined. */
uint8_t entry_status; /* Entry Status. */
uint32_t handle; /* System handle. */
uint32_t reserved_0; /* System handle. */
uint16_t comp_func_num;
__le16 fw_iotcl_flags;
__le32 dataword_r; /* Data word returned */
uint32_t adapid; /* Adapter ID */
uint32_t dataword_r_extra;
__le32 seq_no;
uint8_t reserved_2[20];
uint32_t residuallen;
__le32 status;
};
#define STATUS_CONT_TYPE_FX00 0x04
#define FX00_IOCB_TYPE 0x0B
struct fxdisc_entry_fx00 {
uint8_t entry_type; /* Entry type. */
uint8_t entry_count; /* Entry count. */
uint8_t sys_define; /* System Defined. */
uint8_t entry_status; /* Entry Status. */
__le32 handle; /* System handle. */
__le32 reserved_0; /* System handle. */
__le16 func_num;
__le16 req_xfrcnt;
__le16 req_dsdcnt;
__le16 rsp_xfrcnt;
__le16 rsp_dsdcnt;
uint8_t flags;
uint8_t reserved_1;
struct dsd64 dseg_rq;
struct dsd64 dseg_rsp;
__le32 dataword;
__le32 adapid;
__le32 adapid_hi;
__le32 dataword_extra;
};
struct qlafx00_tgt_node_info {
uint8_t tgt_node_wwpn[WWN_SIZE];
uint8_t tgt_node_wwnn[WWN_SIZE];
uint32_t tgt_node_state;
uint8_t reserved[128];
uint32_t reserved_1[8];
uint64_t reserved_2[4];
} __packed;
#define QLAFX00_TGT_NODE_INFO sizeof(struct qlafx00_tgt_node_info)
#define QLAFX00_LINK_STATUS_DOWN 0x10
#define QLAFX00_LINK_STATUS_UP 0x11
#define QLAFX00_PORT_SPEED_2G 0x2
#define QLAFX00_PORT_SPEED_4G 0x4
#define QLAFX00_PORT_SPEED_8G 0x8
#define QLAFX00_PORT_SPEED_10G 0xa
struct port_info_data {
uint8_t port_state;
uint8_t port_type;
uint16_t port_identifier;
uint32_t up_port_state;
uint8_t fw_ver_num[32];
uint8_t portal_attrib;
uint16_t host_option;
uint8_t reset_delay;
uint8_t pdwn_retry_cnt;
uint16_t max_luns2tgt;
uint8_t risc_ver;
uint8_t pconn_option;
uint16_t risc_option;
uint16_t max_frame_len;
uint16_t max_iocb_alloc;
uint16_t exec_throttle;
uint8_t retry_cnt;
uint8_t retry_delay;
uint8_t port_name[8];
uint8_t port_id[3];
uint8_t link_status;
uint8_t plink_rate;
uint32_t link_config;
uint16_t adap_haddr;
uint8_t tgt_disc;
uint8_t log_tout;
uint8_t node_name[8];
uint16_t erisc_opt1;
uint8_t resp_acc_tmr;
uint8_t intr_del_tmr;
uint8_t erisc_opt2;
uint8_t alt_port_name[8];
uint8_t alt_node_name[8];
uint8_t link_down_tout;
uint8_t conn_type;
uint8_t fc_fw_mode;
uint32_t uiReserved[48];
} __packed;
/* OS Type Designations */
#define OS_TYPE_UNKNOWN 0
#define OS_TYPE_LINUX 2
/* Linux Info */
#define SYSNAME_LENGTH 128
#define NODENAME_LENGTH 64
#define RELEASE_LENGTH 64
#define VERSION_LENGTH 64
#define MACHINE_LENGTH 64
#define DOMNAME_LENGTH 64
struct host_system_info {
uint32_t os_type;
char sysname[SYSNAME_LENGTH];
char nodename[NODENAME_LENGTH];
char release[RELEASE_LENGTH];
char version[VERSION_LENGTH];
char machine[MACHINE_LENGTH];
char domainname[DOMNAME_LENGTH];
char hostdriver[VERSION_LENGTH];
uint32_t reserved[64];
} __packed;
struct register_host_info {
struct host_system_info hsi; /* host system info */
uint64_t utc; /* UTC (system time) */
uint32_t reserved[64]; /* future additions */
} __packed;
#define QLAFX00_PORT_DATA_INFO (sizeof(struct port_info_data))
#define QLAFX00_TGT_NODE_LIST_SIZE (sizeof(uint32_t) * 32)
struct config_info_data {
uint8_t model_num[16];
uint8_t model_description[80];
uint8_t reserved0[160];
uint8_t symbolic_name[64];
uint8_t serial_num[32];
uint8_t hw_version[16];
uint8_t fw_version[16];
uint8_t uboot_version[16];
uint8_t fru_serial_num[32];
uint8_t fc_port_count;
uint8_t iscsi_port_count;
uint8_t reserved1[2];
uint8_t mode;
uint8_t log_level;
uint8_t reserved2[2];
uint32_t log_size;
uint8_t tgt_pres_mode;
uint8_t iqn_flags;
uint8_t lun_mapping;
uint64_t adapter_id;
uint32_t cluster_key_len;
uint8_t cluster_key[16];
uint64_t cluster_master_id;
uint64_t cluster_slave_id;
uint8_t cluster_flags;
uint32_t enabled_capabilities;
uint32_t nominal_temp_value;
} __packed;
#define FXDISC_GET_CONFIG_INFO 0x01
#define FXDISC_GET_PORT_INFO 0x02
#define FXDISC_GET_TGT_NODE_INFO 0x80
#define FXDISC_GET_TGT_NODE_LIST 0x81
#define FXDISC_REG_HOST_INFO 0x99
#define FXDISC_ABORT_IOCTL 0xff
#define QLAFX00_HBA_ICNTRL_REG 0x20B08
#define QLAFX00_ICR_ENB_MASK 0x80000000
#define QLAFX00_ICR_DIS_MASK 0x7fffffff
#define QLAFX00_HST_RST_REG 0x18264
#define QLAFX00_SOC_TEMP_REG 0x184C4
#define QLAFX00_HST_TO_HBA_REG 0x20A04
#define QLAFX00_HBA_TO_HOST_REG 0x21B70
#define QLAFX00_HST_INT_STS_BITS 0x7
#define QLAFX00_BAR1_BASE_ADDR_REG 0x40018
#define QLAFX00_PEX0_WIN0_BASE_ADDR_REG 0x41824
#define QLAFX00_INTR_MB_CMPLT 0x1
#define QLAFX00_INTR_RSP_CMPLT 0x2
#define QLAFX00_INTR_ASYNC_CMPLT 0x4
#define QLAFX00_MBA_SYSTEM_ERR 0x8002
#define QLAFX00_MBA_TEMP_OVER 0x8005
#define QLAFX00_MBA_TEMP_NORM 0x8006
#define QLAFX00_MBA_TEMP_CRIT 0x8007
#define QLAFX00_MBA_LINK_UP 0x8011
#define QLAFX00_MBA_LINK_DOWN 0x8012
#define QLAFX00_MBA_PORT_UPDATE 0x8014
#define QLAFX00_MBA_SHUTDOWN_RQSTD 0x8062
#define SOC_SW_RST_CONTROL_REG_CORE0 0x0020800
#define SOC_FABRIC_RST_CONTROL_REG 0x0020840
#define SOC_FABRIC_CONTROL_REG 0x0020200
#define SOC_FABRIC_CONFIG_REG 0x0020204
#define SOC_PWR_MANAGEMENT_PWR_DOWN_REG 0x001820C
#define SOC_INTERRUPT_SOURCE_I_CONTROL_REG 0x0020B00
#define SOC_CORE_TIMER_REG 0x0021850
#define SOC_IRQ_ACK_REG 0x00218b4
#define CONTINUE_A64_TYPE_FX00 0x03 /* Continuation entry. */
#define QLAFX00_SET_HST_INTR(ha, value) \
WRT_REG_DWORD((ha)->cregbase + QLAFX00_HST_TO_HBA_REG, \
value)
#define QLAFX00_CLR_HST_INTR(ha, value) \
WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG, \
~value)
#define QLAFX00_RD_INTR_REG(ha) \
RD_REG_DWORD((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG)
#define QLAFX00_CLR_INTR_REG(ha, value) \
WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_TO_HOST_REG, \
~value)
#define QLAFX00_SET_HBA_SOC_REG(ha, off, val)\
WRT_REG_DWORD((ha)->cregbase + off, val)
#define QLAFX00_GET_HBA_SOC_REG(ha, off)\
RD_REG_DWORD((ha)->cregbase + off)
#define QLAFX00_HBA_RST_REG(ha, val)\
WRT_REG_DWORD((ha)->cregbase + QLAFX00_HST_RST_REG, val)
#define QLAFX00_RD_ICNTRL_REG(ha) \
RD_REG_DWORD((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG)
#define QLAFX00_ENABLE_ICNTRL_REG(ha) \
WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG, \
(QLAFX00_GET_HBA_SOC_REG(ha, QLAFX00_HBA_ICNTRL_REG) | \
QLAFX00_ICR_ENB_MASK))
#define QLAFX00_DISABLE_ICNTRL_REG(ha) \
WRT_REG_DWORD((ha)->cregbase + QLAFX00_HBA_ICNTRL_REG, \
(QLAFX00_GET_HBA_SOC_REG(ha, QLAFX00_HBA_ICNTRL_REG) & \
QLAFX00_ICR_DIS_MASK))
#define QLAFX00_RD_REG(ha, off) \
RD_REG_DWORD((ha)->cregbase + off)
#define QLAFX00_WR_REG(ha, off, val) \
WRT_REG_DWORD((ha)->cregbase + off, val)
struct qla_mt_iocb_rqst_fx00 {
__le32 reserved_0;
__le16 func_type;
uint8_t flags;
uint8_t reserved_1;
__le32 dataword;
__le32 adapid;
__le32 adapid_hi;
__le32 dataword_extra;
__le16 req_len;
__le16 reserved_2;
__le16 rsp_len;
__le16 reserved_3;
};
struct qla_mt_iocb_rsp_fx00 {
uint32_t reserved_1;
uint16_t func_type;
__le16 ioctl_flags;
__le32 ioctl_data;
uint32_t adapid;
uint32_t adapid_hi;
uint32_t reserved_2;
__le32 seq_number;
uint8_t reserved_3[20];
int32_t res_count;
__le32 status;
};
#define MAILBOX_REGISTER_COUNT_FX00 16
#define AEN_MAILBOX_REGISTER_COUNT_FX00 8
#define MAX_FIBRE_DEVICES_FX00 512
#define MAX_LUNS_FX00 0x1024
#define MAX_TARGETS_FX00 MAX_ISA_DEVICES
#define REQUEST_ENTRY_CNT_FX00 512 /* Number of request entries. */
#define RESPONSE_ENTRY_CNT_FX00 256 /* Number of response entries.*/
/*
* Firmware state codes for QLAFX00 adapters
*/
#define FSTATE_FX00_CONFIG_WAIT 0x0000 /* Waiting for driver to issue
* Initialize FW Mbox cmd
*/
#define FSTATE_FX00_INITIALIZED 0x1000 /* FW has been initialized by
* the driver
*/
#define FX00_DEF_RATOV 10
struct mr_data_fx00 {
uint8_t symbolic_name[64];
uint8_t serial_num[32];
uint8_t hw_version[16];
uint8_t fw_version[16];
uint8_t uboot_version[16];
uint8_t fru_serial_num[32];
fc_port_t fcport; /* fcport used for requests
* that are not linked
* to a particular target
*/
uint8_t fw_hbt_en;
uint8_t fw_hbt_cnt;
uint8_t fw_hbt_miss_cnt;
uint32_t old_fw_hbt_cnt;
uint16_t fw_reset_timer_tick;
uint8_t fw_reset_timer_exp;
uint16_t fw_critemp_timer_tick;
uint32_t old_aenmbx0_state;
uint32_t critical_temperature;
bool extended_io_enabled;
bool host_info_resend;
uint8_t hinfo_resend_timer_tick;
};
#define QLAFX00_EXTENDED_IO_EN_MASK 0x20
/*
* SoC Junction Temperature is stored in
* bits 9:1 of SoC Junction Temperature Register
* in a firmware specific format format.
* To get the temperature in Celsius degrees
* the value from this bitfiled should be converted
* using this formula:
* Temperature (degrees C) = ((3,153,000 - (10,000 * X)) / 13,825)
* where X is the bit field value
* this macro reads the register, extracts the bitfield value,
* performs the calcualtions and returns temperature in Celsius
*/
#define QLAFX00_GET_TEMPERATURE(ha) ((3153000 - (10000 * \
((QLAFX00_RD_REG(ha, QLAFX00_SOC_TEMP_REG) & 0x3FE) >> 1))) / 13825)
#define QLAFX00_LOOP_DOWN_TIME 615 /* 600 */
#define QLAFX00_HEARTBEAT_INTERVAL 6 /* number of seconds */
#define QLAFX00_HEARTBEAT_MISS_CNT 3 /* number of miss */
#define QLAFX00_RESET_INTERVAL 120 /* number of seconds */
#define QLAFX00_MAX_RESET_INTERVAL 600 /* number of seconds */
#define QLAFX00_CRITEMP_INTERVAL 60 /* number of seconds */
#define QLAFX00_HINFO_RESEND_INTERVAL 60 /* number of seconds */
#define QLAFX00_CRITEMP_THRSHLD 80 /* Celsius degrees */
/* Max conncurrent IOs that can be queued */
#define QLAFX00_MAX_CANQUEUE 1024
/* IOCTL IOCB abort success */
#define QLAFX00_IOCTL_ICOB_ABORT_SUCCESS 0x68
#endif