![Lars-Peter Clausen](/assets/img/avatar_default.png)
Since commit 1c6c69525b
("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail. This patch adds the
IRQF_ONESHOT to input drivers where it is missing. Not modified by
this patch are those drivers where the requested IRQ will always be a
nested IRQ (e.g. because it's part of an MFD), since for this special
case IRQF_ONESHOT is not required to be specified when requesting the
IRQ.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
756 lines
18 KiB
C
756 lines
18 KiB
C
/*
|
|
* TSC2005 touchscreen driver
|
|
*
|
|
* Copyright (C) 2006-2010 Nokia Corporation
|
|
*
|
|
* Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
|
|
* based on TSC2301 driver by Klaus K. Pedersen <klaus.k.pedersen@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/input.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/tsc2005.h>
|
|
|
|
/*
|
|
* The touchscreen interface operates as follows:
|
|
*
|
|
* 1) Pen is pressed against the touchscreen.
|
|
* 2) TSC2005 performs AD conversion.
|
|
* 3) After the conversion is done TSC2005 drives DAV line down.
|
|
* 4) GPIO IRQ is received and tsc2005_irq_thread() is scheduled.
|
|
* 5) tsc2005_irq_thread() queues up an spi transfer to fetch the x, y, z1, z2
|
|
* values.
|
|
* 6) tsc2005_irq_thread() reports coordinates to input layer and sets up
|
|
* tsc2005_penup_timer() to be called after TSC2005_PENUP_TIME_MS (40ms).
|
|
* 7) When the penup timer expires, there have not been touch or DAV interrupts
|
|
* during the last 40ms which means the pen has been lifted.
|
|
*
|
|
* ESD recovery via a hardware reset is done if the TSC2005 doesn't respond
|
|
* after a configurable period (in ms) of activity. If esd_timeout is 0, the
|
|
* watchdog is disabled.
|
|
*/
|
|
|
|
/* control byte 1 */
|
|
#define TSC2005_CMD 0x80
|
|
#define TSC2005_CMD_NORMAL 0x00
|
|
#define TSC2005_CMD_STOP 0x01
|
|
#define TSC2005_CMD_12BIT 0x04
|
|
|
|
/* control byte 0 */
|
|
#define TSC2005_REG_READ 0x0001
|
|
#define TSC2005_REG_PND0 0x0002
|
|
#define TSC2005_REG_X 0x0000
|
|
#define TSC2005_REG_Y 0x0008
|
|
#define TSC2005_REG_Z1 0x0010
|
|
#define TSC2005_REG_Z2 0x0018
|
|
#define TSC2005_REG_TEMP_HIGH 0x0050
|
|
#define TSC2005_REG_CFR0 0x0060
|
|
#define TSC2005_REG_CFR1 0x0068
|
|
#define TSC2005_REG_CFR2 0x0070
|
|
|
|
/* configuration register 0 */
|
|
#define TSC2005_CFR0_PRECHARGE_276US 0x0040
|
|
#define TSC2005_CFR0_STABTIME_1MS 0x0300
|
|
#define TSC2005_CFR0_CLOCK_1MHZ 0x1000
|
|
#define TSC2005_CFR0_RESOLUTION12 0x2000
|
|
#define TSC2005_CFR0_PENMODE 0x8000
|
|
#define TSC2005_CFR0_INITVALUE (TSC2005_CFR0_STABTIME_1MS | \
|
|
TSC2005_CFR0_CLOCK_1MHZ | \
|
|
TSC2005_CFR0_RESOLUTION12 | \
|
|
TSC2005_CFR0_PRECHARGE_276US | \
|
|
TSC2005_CFR0_PENMODE)
|
|
|
|
/* bits common to both read and write of configuration register 0 */
|
|
#define TSC2005_CFR0_RW_MASK 0x3fff
|
|
|
|
/* configuration register 1 */
|
|
#define TSC2005_CFR1_BATCHDELAY_4MS 0x0003
|
|
#define TSC2005_CFR1_INITVALUE TSC2005_CFR1_BATCHDELAY_4MS
|
|
|
|
/* configuration register 2 */
|
|
#define TSC2005_CFR2_MAVE_Z 0x0004
|
|
#define TSC2005_CFR2_MAVE_Y 0x0008
|
|
#define TSC2005_CFR2_MAVE_X 0x0010
|
|
#define TSC2005_CFR2_AVG_7 0x0800
|
|
#define TSC2005_CFR2_MEDIUM_15 0x3000
|
|
#define TSC2005_CFR2_INITVALUE (TSC2005_CFR2_MAVE_X | \
|
|
TSC2005_CFR2_MAVE_Y | \
|
|
TSC2005_CFR2_MAVE_Z | \
|
|
TSC2005_CFR2_MEDIUM_15 | \
|
|
TSC2005_CFR2_AVG_7)
|
|
|
|
#define MAX_12BIT 0xfff
|
|
#define TSC2005_SPI_MAX_SPEED_HZ 10000000
|
|
#define TSC2005_PENUP_TIME_MS 40
|
|
|
|
struct tsc2005_spi_rd {
|
|
struct spi_transfer spi_xfer;
|
|
u32 spi_tx;
|
|
u32 spi_rx;
|
|
};
|
|
|
|
struct tsc2005 {
|
|
struct spi_device *spi;
|
|
|
|
struct spi_message spi_read_msg;
|
|
struct tsc2005_spi_rd spi_x;
|
|
struct tsc2005_spi_rd spi_y;
|
|
struct tsc2005_spi_rd spi_z1;
|
|
struct tsc2005_spi_rd spi_z2;
|
|
|
|
struct input_dev *idev;
|
|
char phys[32];
|
|
|
|
struct mutex mutex;
|
|
|
|
/* raw copy of previous x,y,z */
|
|
int in_x;
|
|
int in_y;
|
|
int in_z1;
|
|
int in_z2;
|
|
|
|
spinlock_t lock;
|
|
struct timer_list penup_timer;
|
|
|
|
unsigned int esd_timeout;
|
|
struct delayed_work esd_work;
|
|
unsigned long last_valid_interrupt;
|
|
|
|
unsigned int x_plate_ohm;
|
|
|
|
bool opened;
|
|
bool suspended;
|
|
|
|
bool pen_down;
|
|
|
|
void (*set_reset)(bool enable);
|
|
};
|
|
|
|
static int tsc2005_cmd(struct tsc2005 *ts, u8 cmd)
|
|
{
|
|
u8 tx = TSC2005_CMD | TSC2005_CMD_12BIT | cmd;
|
|
struct spi_transfer xfer = {
|
|
.tx_buf = &tx,
|
|
.len = 1,
|
|
.bits_per_word = 8,
|
|
};
|
|
struct spi_message msg;
|
|
int error;
|
|
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&xfer, &msg);
|
|
|
|
error = spi_sync(ts->spi, &msg);
|
|
if (error) {
|
|
dev_err(&ts->spi->dev, "%s: failed, command: %x, error: %d\n",
|
|
__func__, cmd, error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tsc2005_write(struct tsc2005 *ts, u8 reg, u16 value)
|
|
{
|
|
u32 tx = ((reg | TSC2005_REG_PND0) << 16) | value;
|
|
struct spi_transfer xfer = {
|
|
.tx_buf = &tx,
|
|
.len = 4,
|
|
.bits_per_word = 24,
|
|
};
|
|
struct spi_message msg;
|
|
int error;
|
|
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&xfer, &msg);
|
|
|
|
error = spi_sync(ts->spi, &msg);
|
|
if (error) {
|
|
dev_err(&ts->spi->dev,
|
|
"%s: failed, register: %x, value: %x, error: %d\n",
|
|
__func__, reg, value, error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tsc2005_setup_read(struct tsc2005_spi_rd *rd, u8 reg, bool last)
|
|
{
|
|
memset(rd, 0, sizeof(*rd));
|
|
|
|
rd->spi_tx = (reg | TSC2005_REG_READ) << 16;
|
|
rd->spi_xfer.tx_buf = &rd->spi_tx;
|
|
rd->spi_xfer.rx_buf = &rd->spi_rx;
|
|
rd->spi_xfer.len = 4;
|
|
rd->spi_xfer.bits_per_word = 24;
|
|
rd->spi_xfer.cs_change = !last;
|
|
}
|
|
|
|
static int tsc2005_read(struct tsc2005 *ts, u8 reg, u16 *value)
|
|
{
|
|
struct tsc2005_spi_rd spi_rd;
|
|
struct spi_message msg;
|
|
int error;
|
|
|
|
tsc2005_setup_read(&spi_rd, reg, true);
|
|
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&spi_rd.spi_xfer, &msg);
|
|
|
|
error = spi_sync(ts->spi, &msg);
|
|
if (error)
|
|
return error;
|
|
|
|
*value = spi_rd.spi_rx;
|
|
return 0;
|
|
}
|
|
|
|
static void tsc2005_update_pen_state(struct tsc2005 *ts,
|
|
int x, int y, int pressure)
|
|
{
|
|
if (pressure) {
|
|
input_report_abs(ts->idev, ABS_X, x);
|
|
input_report_abs(ts->idev, ABS_Y, y);
|
|
input_report_abs(ts->idev, ABS_PRESSURE, pressure);
|
|
if (!ts->pen_down) {
|
|
input_report_key(ts->idev, BTN_TOUCH, !!pressure);
|
|
ts->pen_down = true;
|
|
}
|
|
} else {
|
|
input_report_abs(ts->idev, ABS_PRESSURE, 0);
|
|
if (ts->pen_down) {
|
|
input_report_key(ts->idev, BTN_TOUCH, 0);
|
|
ts->pen_down = false;
|
|
}
|
|
}
|
|
input_sync(ts->idev);
|
|
dev_dbg(&ts->spi->dev, "point(%4d,%4d), pressure (%4d)\n", x, y,
|
|
pressure);
|
|
}
|
|
|
|
static irqreturn_t tsc2005_irq_thread(int irq, void *_ts)
|
|
{
|
|
struct tsc2005 *ts = _ts;
|
|
unsigned long flags;
|
|
unsigned int pressure;
|
|
u32 x, y;
|
|
u32 z1, z2;
|
|
int error;
|
|
|
|
/* read the coordinates */
|
|
error = spi_sync(ts->spi, &ts->spi_read_msg);
|
|
if (unlikely(error))
|
|
goto out;
|
|
|
|
x = ts->spi_x.spi_rx;
|
|
y = ts->spi_y.spi_rx;
|
|
z1 = ts->spi_z1.spi_rx;
|
|
z2 = ts->spi_z2.spi_rx;
|
|
|
|
/* validate position */
|
|
if (unlikely(x > MAX_12BIT || y > MAX_12BIT))
|
|
goto out;
|
|
|
|
/* Skip reading if the pressure components are out of range */
|
|
if (unlikely(z1 == 0 || z2 > MAX_12BIT || z1 >= z2))
|
|
goto out;
|
|
|
|
/*
|
|
* Skip point if this is a pen down with the exact same values as
|
|
* the value before pen-up - that implies SPI fed us stale data
|
|
*/
|
|
if (!ts->pen_down &&
|
|
ts->in_x == x && ts->in_y == y &&
|
|
ts->in_z1 == z1 && ts->in_z2 == z2) {
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* At this point we are happy we have a valid and useful reading.
|
|
* Remember it for later comparisons. We may now begin downsampling.
|
|
*/
|
|
ts->in_x = x;
|
|
ts->in_y = y;
|
|
ts->in_z1 = z1;
|
|
ts->in_z2 = z2;
|
|
|
|
/* Compute touch pressure resistance using equation #1 */
|
|
pressure = x * (z2 - z1) / z1;
|
|
pressure = pressure * ts->x_plate_ohm / 4096;
|
|
if (unlikely(pressure > MAX_12BIT))
|
|
goto out;
|
|
|
|
spin_lock_irqsave(&ts->lock, flags);
|
|
|
|
tsc2005_update_pen_state(ts, x, y, pressure);
|
|
mod_timer(&ts->penup_timer,
|
|
jiffies + msecs_to_jiffies(TSC2005_PENUP_TIME_MS));
|
|
|
|
spin_unlock_irqrestore(&ts->lock, flags);
|
|
|
|
ts->last_valid_interrupt = jiffies;
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void tsc2005_penup_timer(unsigned long data)
|
|
{
|
|
struct tsc2005 *ts = (struct tsc2005 *)data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ts->lock, flags);
|
|
tsc2005_update_pen_state(ts, 0, 0, 0);
|
|
spin_unlock_irqrestore(&ts->lock, flags);
|
|
}
|
|
|
|
static void tsc2005_start_scan(struct tsc2005 *ts)
|
|
{
|
|
tsc2005_write(ts, TSC2005_REG_CFR0, TSC2005_CFR0_INITVALUE);
|
|
tsc2005_write(ts, TSC2005_REG_CFR1, TSC2005_CFR1_INITVALUE);
|
|
tsc2005_write(ts, TSC2005_REG_CFR2, TSC2005_CFR2_INITVALUE);
|
|
tsc2005_cmd(ts, TSC2005_CMD_NORMAL);
|
|
}
|
|
|
|
static void tsc2005_stop_scan(struct tsc2005 *ts)
|
|
{
|
|
tsc2005_cmd(ts, TSC2005_CMD_STOP);
|
|
}
|
|
|
|
/* must be called with ts->mutex held */
|
|
static void __tsc2005_disable(struct tsc2005 *ts)
|
|
{
|
|
tsc2005_stop_scan(ts);
|
|
|
|
disable_irq(ts->spi->irq);
|
|
del_timer_sync(&ts->penup_timer);
|
|
|
|
cancel_delayed_work_sync(&ts->esd_work);
|
|
|
|
enable_irq(ts->spi->irq);
|
|
}
|
|
|
|
/* must be called with ts->mutex held */
|
|
static void __tsc2005_enable(struct tsc2005 *ts)
|
|
{
|
|
tsc2005_start_scan(ts);
|
|
|
|
if (ts->esd_timeout && ts->set_reset) {
|
|
ts->last_valid_interrupt = jiffies;
|
|
schedule_delayed_work(&ts->esd_work,
|
|
round_jiffies_relative(
|
|
msecs_to_jiffies(ts->esd_timeout)));
|
|
}
|
|
|
|
}
|
|
|
|
static ssize_t tsc2005_selftest_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct tsc2005 *ts = spi_get_drvdata(spi);
|
|
u16 temp_high;
|
|
u16 temp_high_orig;
|
|
u16 temp_high_test;
|
|
bool success = true;
|
|
int error;
|
|
|
|
mutex_lock(&ts->mutex);
|
|
|
|
/*
|
|
* Test TSC2005 communications via temp high register.
|
|
*/
|
|
__tsc2005_disable(ts);
|
|
|
|
error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high_orig);
|
|
if (error) {
|
|
dev_warn(dev, "selftest failed: read error %d\n", error);
|
|
success = false;
|
|
goto out;
|
|
}
|
|
|
|
temp_high_test = (temp_high_orig - 1) & MAX_12BIT;
|
|
|
|
error = tsc2005_write(ts, TSC2005_REG_TEMP_HIGH, temp_high_test);
|
|
if (error) {
|
|
dev_warn(dev, "selftest failed: write error %d\n", error);
|
|
success = false;
|
|
goto out;
|
|
}
|
|
|
|
error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high);
|
|
if (error) {
|
|
dev_warn(dev, "selftest failed: read error %d after write\n",
|
|
error);
|
|
success = false;
|
|
goto out;
|
|
}
|
|
|
|
if (temp_high != temp_high_test) {
|
|
dev_warn(dev, "selftest failed: %d != %d\n",
|
|
temp_high, temp_high_test);
|
|
success = false;
|
|
}
|
|
|
|
/* hardware reset */
|
|
ts->set_reset(false);
|
|
usleep_range(100, 500); /* only 10us required */
|
|
ts->set_reset(true);
|
|
|
|
if (!success)
|
|
goto out;
|
|
|
|
/* test that the reset really happened */
|
|
error = tsc2005_read(ts, TSC2005_REG_TEMP_HIGH, &temp_high);
|
|
if (error) {
|
|
dev_warn(dev, "selftest failed: read error %d after reset\n",
|
|
error);
|
|
success = false;
|
|
goto out;
|
|
}
|
|
|
|
if (temp_high != temp_high_orig) {
|
|
dev_warn(dev, "selftest failed after reset: %d != %d\n",
|
|
temp_high, temp_high_orig);
|
|
success = false;
|
|
}
|
|
|
|
out:
|
|
__tsc2005_enable(ts);
|
|
mutex_unlock(&ts->mutex);
|
|
|
|
return sprintf(buf, "%d\n", success);
|
|
}
|
|
|
|
static DEVICE_ATTR(selftest, S_IRUGO, tsc2005_selftest_show, NULL);
|
|
|
|
static struct attribute *tsc2005_attrs[] = {
|
|
&dev_attr_selftest.attr,
|
|
NULL
|
|
};
|
|
|
|
static umode_t tsc2005_attr_is_visible(struct kobject *kobj,
|
|
struct attribute *attr, int n)
|
|
{
|
|
struct device *dev = container_of(kobj, struct device, kobj);
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct tsc2005 *ts = spi_get_drvdata(spi);
|
|
umode_t mode = attr->mode;
|
|
|
|
if (attr == &dev_attr_selftest.attr) {
|
|
if (!ts->set_reset)
|
|
mode = 0;
|
|
}
|
|
|
|
return mode;
|
|
}
|
|
|
|
static const struct attribute_group tsc2005_attr_group = {
|
|
.is_visible = tsc2005_attr_is_visible,
|
|
.attrs = tsc2005_attrs,
|
|
};
|
|
|
|
static void tsc2005_esd_work(struct work_struct *work)
|
|
{
|
|
struct tsc2005 *ts = container_of(work, struct tsc2005, esd_work.work);
|
|
int error;
|
|
u16 r;
|
|
|
|
if (!mutex_trylock(&ts->mutex)) {
|
|
/*
|
|
* If the mutex is taken, it means that disable or enable is in
|
|
* progress. In that case just reschedule the work. If the work
|
|
* is not needed, it will be canceled by disable.
|
|
*/
|
|
goto reschedule;
|
|
}
|
|
|
|
if (time_is_after_jiffies(ts->last_valid_interrupt +
|
|
msecs_to_jiffies(ts->esd_timeout)))
|
|
goto out;
|
|
|
|
/* We should be able to read register without disabling interrupts. */
|
|
error = tsc2005_read(ts, TSC2005_REG_CFR0, &r);
|
|
if (!error &&
|
|
!((r ^ TSC2005_CFR0_INITVALUE) & TSC2005_CFR0_RW_MASK)) {
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* If we could not read our known value from configuration register 0
|
|
* then we should reset the controller as if from power-up and start
|
|
* scanning again.
|
|
*/
|
|
dev_info(&ts->spi->dev, "TSC2005 not responding - resetting\n");
|
|
|
|
disable_irq(ts->spi->irq);
|
|
del_timer_sync(&ts->penup_timer);
|
|
|
|
tsc2005_update_pen_state(ts, 0, 0, 0);
|
|
|
|
ts->set_reset(false);
|
|
usleep_range(100, 500); /* only 10us required */
|
|
ts->set_reset(true);
|
|
|
|
enable_irq(ts->spi->irq);
|
|
tsc2005_start_scan(ts);
|
|
|
|
out:
|
|
mutex_unlock(&ts->mutex);
|
|
reschedule:
|
|
/* re-arm the watchdog */
|
|
schedule_delayed_work(&ts->esd_work,
|
|
round_jiffies_relative(
|
|
msecs_to_jiffies(ts->esd_timeout)));
|
|
}
|
|
|
|
static int tsc2005_open(struct input_dev *input)
|
|
{
|
|
struct tsc2005 *ts = input_get_drvdata(input);
|
|
|
|
mutex_lock(&ts->mutex);
|
|
|
|
if (!ts->suspended)
|
|
__tsc2005_enable(ts);
|
|
|
|
ts->opened = true;
|
|
|
|
mutex_unlock(&ts->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tsc2005_close(struct input_dev *input)
|
|
{
|
|
struct tsc2005 *ts = input_get_drvdata(input);
|
|
|
|
mutex_lock(&ts->mutex);
|
|
|
|
if (!ts->suspended)
|
|
__tsc2005_disable(ts);
|
|
|
|
ts->opened = false;
|
|
|
|
mutex_unlock(&ts->mutex);
|
|
}
|
|
|
|
static void __devinit tsc2005_setup_spi_xfer(struct tsc2005 *ts)
|
|
{
|
|
tsc2005_setup_read(&ts->spi_x, TSC2005_REG_X, false);
|
|
tsc2005_setup_read(&ts->spi_y, TSC2005_REG_Y, false);
|
|
tsc2005_setup_read(&ts->spi_z1, TSC2005_REG_Z1, false);
|
|
tsc2005_setup_read(&ts->spi_z2, TSC2005_REG_Z2, true);
|
|
|
|
spi_message_init(&ts->spi_read_msg);
|
|
spi_message_add_tail(&ts->spi_x.spi_xfer, &ts->spi_read_msg);
|
|
spi_message_add_tail(&ts->spi_y.spi_xfer, &ts->spi_read_msg);
|
|
spi_message_add_tail(&ts->spi_z1.spi_xfer, &ts->spi_read_msg);
|
|
spi_message_add_tail(&ts->spi_z2.spi_xfer, &ts->spi_read_msg);
|
|
}
|
|
|
|
static int __devinit tsc2005_probe(struct spi_device *spi)
|
|
{
|
|
const struct tsc2005_platform_data *pdata = spi->dev.platform_data;
|
|
struct tsc2005 *ts;
|
|
struct input_dev *input_dev;
|
|
unsigned int max_x, max_y, max_p;
|
|
unsigned int fudge_x, fudge_y, fudge_p;
|
|
int error;
|
|
|
|
if (!pdata) {
|
|
dev_dbg(&spi->dev, "no platform data\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
fudge_x = pdata->ts_x_fudge ? : 4;
|
|
fudge_y = pdata->ts_y_fudge ? : 8;
|
|
fudge_p = pdata->ts_pressure_fudge ? : 2;
|
|
max_x = pdata->ts_x_max ? : MAX_12BIT;
|
|
max_y = pdata->ts_y_max ? : MAX_12BIT;
|
|
max_p = pdata->ts_pressure_max ? : MAX_12BIT;
|
|
|
|
if (spi->irq <= 0) {
|
|
dev_dbg(&spi->dev, "no irq\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
spi->mode = SPI_MODE_0;
|
|
spi->bits_per_word = 8;
|
|
if (!spi->max_speed_hz)
|
|
spi->max_speed_hz = TSC2005_SPI_MAX_SPEED_HZ;
|
|
|
|
error = spi_setup(spi);
|
|
if (error)
|
|
return error;
|
|
|
|
ts = kzalloc(sizeof(*ts), GFP_KERNEL);
|
|
input_dev = input_allocate_device();
|
|
if (!ts || !input_dev) {
|
|
error = -ENOMEM;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
ts->spi = spi;
|
|
ts->idev = input_dev;
|
|
|
|
ts->x_plate_ohm = pdata->ts_x_plate_ohm ? : 280;
|
|
ts->esd_timeout = pdata->esd_timeout_ms;
|
|
ts->set_reset = pdata->set_reset;
|
|
|
|
mutex_init(&ts->mutex);
|
|
|
|
spin_lock_init(&ts->lock);
|
|
setup_timer(&ts->penup_timer, tsc2005_penup_timer, (unsigned long)ts);
|
|
|
|
INIT_DELAYED_WORK(&ts->esd_work, tsc2005_esd_work);
|
|
|
|
tsc2005_setup_spi_xfer(ts);
|
|
|
|
snprintf(ts->phys, sizeof(ts->phys),
|
|
"%s/input-ts", dev_name(&spi->dev));
|
|
|
|
input_dev->name = "TSC2005 touchscreen";
|
|
input_dev->phys = ts->phys;
|
|
input_dev->id.bustype = BUS_SPI;
|
|
input_dev->dev.parent = &spi->dev;
|
|
input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
|
|
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
|
|
|
|
input_set_abs_params(input_dev, ABS_X, 0, max_x, fudge_x, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, 0, max_y, fudge_y, 0);
|
|
input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
|
|
|
|
input_dev->open = tsc2005_open;
|
|
input_dev->close = tsc2005_close;
|
|
|
|
input_set_drvdata(input_dev, ts);
|
|
|
|
/* Ensure the touchscreen is off */
|
|
tsc2005_stop_scan(ts);
|
|
|
|
error = request_threaded_irq(spi->irq, NULL, tsc2005_irq_thread,
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
"tsc2005", ts);
|
|
if (error) {
|
|
dev_err(&spi->dev, "Failed to request irq, err: %d\n", error);
|
|
goto err_free_mem;
|
|
}
|
|
|
|
spi_set_drvdata(spi, ts);
|
|
error = sysfs_create_group(&spi->dev.kobj, &tsc2005_attr_group);
|
|
if (error) {
|
|
dev_err(&spi->dev,
|
|
"Failed to create sysfs attributes, err: %d\n", error);
|
|
goto err_clear_drvdata;
|
|
}
|
|
|
|
error = input_register_device(ts->idev);
|
|
if (error) {
|
|
dev_err(&spi->dev,
|
|
"Failed to register input device, err: %d\n", error);
|
|
goto err_remove_sysfs;
|
|
}
|
|
|
|
irq_set_irq_wake(spi->irq, 1);
|
|
return 0;
|
|
|
|
err_remove_sysfs:
|
|
sysfs_remove_group(&spi->dev.kobj, &tsc2005_attr_group);
|
|
err_clear_drvdata:
|
|
spi_set_drvdata(spi, NULL);
|
|
free_irq(spi->irq, ts);
|
|
err_free_mem:
|
|
input_free_device(input_dev);
|
|
kfree(ts);
|
|
return error;
|
|
}
|
|
|
|
static int __devexit tsc2005_remove(struct spi_device *spi)
|
|
{
|
|
struct tsc2005 *ts = spi_get_drvdata(spi);
|
|
|
|
sysfs_remove_group(&ts->spi->dev.kobj, &tsc2005_attr_group);
|
|
|
|
free_irq(ts->spi->irq, ts);
|
|
input_unregister_device(ts->idev);
|
|
kfree(ts);
|
|
|
|
spi_set_drvdata(spi, NULL);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int tsc2005_suspend(struct device *dev)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct tsc2005 *ts = spi_get_drvdata(spi);
|
|
|
|
mutex_lock(&ts->mutex);
|
|
|
|
if (!ts->suspended && ts->opened)
|
|
__tsc2005_disable(ts);
|
|
|
|
ts->suspended = true;
|
|
|
|
mutex_unlock(&ts->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tsc2005_resume(struct device *dev)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct tsc2005 *ts = spi_get_drvdata(spi);
|
|
|
|
mutex_lock(&ts->mutex);
|
|
|
|
if (ts->suspended && ts->opened)
|
|
__tsc2005_enable(ts);
|
|
|
|
ts->suspended = false;
|
|
|
|
mutex_unlock(&ts->mutex);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(tsc2005_pm_ops, tsc2005_suspend, tsc2005_resume);
|
|
|
|
static struct spi_driver tsc2005_driver = {
|
|
.driver = {
|
|
.name = "tsc2005",
|
|
.owner = THIS_MODULE,
|
|
.pm = &tsc2005_pm_ops,
|
|
},
|
|
.probe = tsc2005_probe,
|
|
.remove = __devexit_p(tsc2005_remove),
|
|
};
|
|
|
|
module_spi_driver(tsc2005_driver);
|
|
|
|
MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>");
|
|
MODULE_DESCRIPTION("TSC2005 Touchscreen Driver");
|
|
MODULE_LICENSE("GPL");
|