26dd3e4ff9
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some code where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace/add as needed. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Build coverage of all the mips defconfigs revealed the module.h header was masking a couple of implicit include instances, so we add the appropriate headers there. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15131/ [james.hogan@imgtec.com: Preserve sort order where it already exists] Signed-off-by: James Hogan <james.hogan@imgtec.com>
226 lines
6.7 KiB
C
226 lines
6.7 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*
|
|
* Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
|
|
* Copyright (C) 2015 John Crispin <john@phrozen.org>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/mipsregs.h>
|
|
#include <asm/smp-ops.h>
|
|
#include <asm/mips-cm.h>
|
|
#include <asm/mips-cpc.h>
|
|
#include <asm/mach-ralink/ralink_regs.h>
|
|
#include <asm/mach-ralink/mt7621.h>
|
|
|
|
#include <pinmux.h>
|
|
|
|
#include "common.h"
|
|
|
|
#define SYSC_REG_SYSCFG 0x10
|
|
#define SYSC_REG_CPLL_CLKCFG0 0x2c
|
|
#define SYSC_REG_CUR_CLK_STS 0x44
|
|
#define CPU_CLK_SEL (BIT(30) | BIT(31))
|
|
|
|
#define MT7621_GPIO_MODE_UART1 1
|
|
#define MT7621_GPIO_MODE_I2C 2
|
|
#define MT7621_GPIO_MODE_UART3_MASK 0x3
|
|
#define MT7621_GPIO_MODE_UART3_SHIFT 3
|
|
#define MT7621_GPIO_MODE_UART3_GPIO 1
|
|
#define MT7621_GPIO_MODE_UART2_MASK 0x3
|
|
#define MT7621_GPIO_MODE_UART2_SHIFT 5
|
|
#define MT7621_GPIO_MODE_UART2_GPIO 1
|
|
#define MT7621_GPIO_MODE_JTAG 7
|
|
#define MT7621_GPIO_MODE_WDT_MASK 0x3
|
|
#define MT7621_GPIO_MODE_WDT_SHIFT 8
|
|
#define MT7621_GPIO_MODE_WDT_GPIO 1
|
|
#define MT7621_GPIO_MODE_PCIE_RST 0
|
|
#define MT7621_GPIO_MODE_PCIE_REF 2
|
|
#define MT7621_GPIO_MODE_PCIE_MASK 0x3
|
|
#define MT7621_GPIO_MODE_PCIE_SHIFT 10
|
|
#define MT7621_GPIO_MODE_PCIE_GPIO 1
|
|
#define MT7621_GPIO_MODE_MDIO_MASK 0x3
|
|
#define MT7621_GPIO_MODE_MDIO_SHIFT 12
|
|
#define MT7621_GPIO_MODE_MDIO_GPIO 1
|
|
#define MT7621_GPIO_MODE_RGMII1 14
|
|
#define MT7621_GPIO_MODE_RGMII2 15
|
|
#define MT7621_GPIO_MODE_SPI_MASK 0x3
|
|
#define MT7621_GPIO_MODE_SPI_SHIFT 16
|
|
#define MT7621_GPIO_MODE_SPI_GPIO 1
|
|
#define MT7621_GPIO_MODE_SDHCI_MASK 0x3
|
|
#define MT7621_GPIO_MODE_SDHCI_SHIFT 18
|
|
#define MT7621_GPIO_MODE_SDHCI_GPIO 1
|
|
|
|
static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) };
|
|
static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) };
|
|
static struct rt2880_pmx_func uart3_grp[] = {
|
|
FUNC("uart3", 0, 5, 4),
|
|
FUNC("i2s", 2, 5, 4),
|
|
FUNC("spdif3", 3, 5, 4),
|
|
};
|
|
static struct rt2880_pmx_func uart2_grp[] = {
|
|
FUNC("uart2", 0, 9, 4),
|
|
FUNC("pcm", 2, 9, 4),
|
|
FUNC("spdif2", 3, 9, 4),
|
|
};
|
|
static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
|
|
static struct rt2880_pmx_func wdt_grp[] = {
|
|
FUNC("wdt rst", 0, 18, 1),
|
|
FUNC("wdt refclk", 2, 18, 1),
|
|
};
|
|
static struct rt2880_pmx_func pcie_rst_grp[] = {
|
|
FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
|
|
FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
|
|
};
|
|
static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
|
|
static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
|
|
static struct rt2880_pmx_func spi_grp[] = {
|
|
FUNC("spi", 0, 34, 7),
|
|
FUNC("nand1", 2, 34, 7),
|
|
};
|
|
static struct rt2880_pmx_func sdhci_grp[] = {
|
|
FUNC("sdhci", 0, 41, 8),
|
|
FUNC("nand2", 2, 41, 8),
|
|
};
|
|
static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
|
|
|
|
static struct rt2880_pmx_group mt7621_pinmux_data[] = {
|
|
GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
|
|
GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
|
|
GRP_G("uart3", uart3_grp, MT7621_GPIO_MODE_UART3_MASK,
|
|
MT7621_GPIO_MODE_UART3_GPIO, MT7621_GPIO_MODE_UART3_SHIFT),
|
|
GRP_G("uart2", uart2_grp, MT7621_GPIO_MODE_UART2_MASK,
|
|
MT7621_GPIO_MODE_UART2_GPIO, MT7621_GPIO_MODE_UART2_SHIFT),
|
|
GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG),
|
|
GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK,
|
|
MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT),
|
|
GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK,
|
|
MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT),
|
|
GRP_G("mdio", mdio_grp, MT7621_GPIO_MODE_MDIO_MASK,
|
|
MT7621_GPIO_MODE_MDIO_GPIO, MT7621_GPIO_MODE_MDIO_SHIFT),
|
|
GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2),
|
|
GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK,
|
|
MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT),
|
|
GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK,
|
|
MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT),
|
|
GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1),
|
|
{ 0 }
|
|
};
|
|
|
|
phys_addr_t mips_cpc_default_phys_base(void)
|
|
{
|
|
panic("Cannot detect cpc address");
|
|
}
|
|
|
|
void __init ralink_clk_init(void)
|
|
{
|
|
int cpu_fdiv = 0;
|
|
int cpu_ffrac = 0;
|
|
int fbdiv = 0;
|
|
u32 clk_sts, syscfg;
|
|
u8 clk_sel = 0, xtal_mode;
|
|
u32 cpu_clk;
|
|
|
|
if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
|
|
clk_sel = 1;
|
|
|
|
switch (clk_sel) {
|
|
case 0:
|
|
clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
|
|
cpu_fdiv = ((clk_sts >> 8) & 0x1F);
|
|
cpu_ffrac = (clk_sts & 0x1F);
|
|
cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
|
|
break;
|
|
|
|
case 1:
|
|
fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
|
|
syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
|
|
xtal_mode = (syscfg >> 6) & 0x7;
|
|
if (xtal_mode >= 6) {
|
|
/* 25Mhz Xtal */
|
|
cpu_clk = 25 * fbdiv * 1000 * 1000;
|
|
} else if (xtal_mode >= 3) {
|
|
/* 40Mhz Xtal */
|
|
cpu_clk = 40 * fbdiv * 1000 * 1000;
|
|
} else {
|
|
/* 20Mhz Xtal */
|
|
cpu_clk = 20 * fbdiv * 1000 * 1000;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
void __init ralink_of_remap(void)
|
|
{
|
|
rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
|
|
rt_memc_membase = plat_of_remap_node("mtk,mt7621-memc");
|
|
|
|
if (!rt_sysc_membase || !rt_memc_membase)
|
|
panic("Failed to remap core resources");
|
|
}
|
|
|
|
void prom_soc_init(struct ralink_soc_info *soc_info)
|
|
{
|
|
void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
|
|
unsigned char *name = NULL;
|
|
u32 n0;
|
|
u32 n1;
|
|
u32 rev;
|
|
|
|
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
|
|
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
|
|
|
|
if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
|
|
name = "MT7621";
|
|
soc_info->compatible = "mtk,mt7621-soc";
|
|
} else {
|
|
panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
|
|
}
|
|
ralink_soc = MT762X_SOC_MT7621AT;
|
|
rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
|
|
|
|
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
|
|
"MediaTek %s ver:%u eco:%u",
|
|
name,
|
|
(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
|
|
(rev & CHIP_REV_ECO_MASK));
|
|
|
|
soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
|
|
soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
|
|
soc_info->mem_base = MT7621_DRAM_BASE;
|
|
|
|
rt2880_pinmux_data = mt7621_pinmux_data;
|
|
|
|
/* Early detection of CMP support */
|
|
mips_cm_probe();
|
|
mips_cpc_probe();
|
|
|
|
if (mips_cm_numiocu()) {
|
|
/*
|
|
* mips_cm_probe() wipes out bootloader
|
|
* config for CM regions and we have to configure them
|
|
* again. This SoC cannot talk to pamlbus devices
|
|
* witout proper iocu region set up.
|
|
*
|
|
* FIXME: it would be better to do this with values
|
|
* from DT, but we need this very early because
|
|
* without this we cannot talk to pretty much anything
|
|
* including serial.
|
|
*/
|
|
write_gcr_reg0_base(MT7621_PALMBUS_BASE);
|
|
write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE |
|
|
CM_GCR_REGn_MASK_CMTGT_IOCU0);
|
|
}
|
|
|
|
if (!register_cps_smp_ops())
|
|
return;
|
|
if (!register_cmp_smp_ops())
|
|
return;
|
|
if (!register_vsmp_smp_ops())
|
|
return;
|
|
}
|