0be1621a74
Most processor modules (e.g., DSP, IVA, IPU) on OMAPs can be reset under the control of the PRM. This patch adds an API for this purpose for OMAP4 devices: int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift); int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift); int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift); This API is intended to be used only by the hwmod code - a subsequent patch will add that support to hwmod. This patch is a collaboration between Benoît Cousson <b-cousson@ti.com> and Paul Walmsley <paul@pwsan.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
177 lines
5.4 KiB
Makefile
177 lines
5.4 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
# Common support
|
|
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o
|
|
|
|
omap-2-3-common = irq.o sdrc.o
|
|
hwmod-common = omap_hwmod.o \
|
|
omap_hwmod_common_data.o
|
|
prcm-common = prcm.o powerdomain.o
|
|
clock-common = clock.o clock_common_data.o \
|
|
clockdomain.o clkt_dpll.o \
|
|
clkt_clksel.o
|
|
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) prm44xx.o $(hwmod-common)
|
|
|
|
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
|
|
|
|
# SMP support ONLY available for OMAP4
|
|
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
|
|
obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
|
|
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o
|
|
|
|
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a
|
|
AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a
|
|
|
|
# Functions loaded to SRAM
|
|
obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
|
|
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
|
|
|
|
AFLAGS_sram242x.o :=-Wa,-march=armv6
|
|
AFLAGS_sram243x.o :=-Wa,-march=armv6
|
|
AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
|
|
|
|
# Pin multiplexing
|
|
obj-$(CONFIG_ARCH_OMAP2420) += mux2420.o
|
|
obj-$(CONFIG_ARCH_OMAP2430) += mux2430.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
|
|
|
|
# SMS/SDRC
|
|
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
|
|
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
|
|
|
|
# Power Management
|
|
ifeq ($(CONFIG_PM),y)
|
|
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
|
|
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o cpuidle34xx.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o
|
|
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
|
|
|
|
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
|
|
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
|
|
|
|
endif
|
|
|
|
# PRCM
|
|
obj-$(CONFIG_ARCH_OMAP2) += cm.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += cm.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o
|
|
|
|
# Clock framework
|
|
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
|
|
clkt2xxx_sys.o \
|
|
clkt2xxx_dpllcore.o \
|
|
clkt2xxx_virt_prcm_set.o \
|
|
clkt2xxx_apll.o clkt2xxx_osc.o
|
|
obj-$(CONFIG_ARCH_OMAP2420) += clock2420_data.o
|
|
obj-$(CONFIG_ARCH_OMAP2430) += clock2430.o clock2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
|
|
clock34xx.o clkt34xx_dpll3m2.o \
|
|
clock3517.o clock36xx.o \
|
|
dpll3xxx.o clock3xxx_data.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
|
|
dpll3xxx.o
|
|
|
|
# OMAP2 clock rate set data (old "OPP" data)
|
|
obj-$(CONFIG_ARCH_OMAP2420) += opp2420_data.o
|
|
obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o
|
|
|
|
# hwmod data
|
|
obj-$(CONFIG_ARCH_OMAP2420) += omap_hwmod_2420_data.o
|
|
obj-$(CONFIG_ARCH_OMAP2430) += omap_hwmod_2430_data.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
|
|
|
|
# EMU peripherals
|
|
obj-$(CONFIG_OMAP3_EMU) += emu.o
|
|
|
|
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
|
|
mailbox_mach-objs := mailbox.o
|
|
|
|
obj-$(CONFIG_OMAP_IOMMU) += iommu2.o
|
|
|
|
iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
|
|
obj-y += $(iommu-m) $(iommu-y)
|
|
|
|
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
|
|
obj-y += $(i2c-omap-m) $(i2c-omap-y)
|
|
|
|
# Specific board support
|
|
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
|
|
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
|
|
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
|
|
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
|
|
board-flash.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OVERO) += board-overo.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
|
|
hsmmc.o \
|
|
board-flash.o
|
|
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
|
|
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
|
|
board-rx51-sdram.o \
|
|
board-rx51-peripherals.o \
|
|
board-rx51-video.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \
|
|
board-zoom-peripherals.o \
|
|
board-flash.o \
|
|
hsmmc.o \
|
|
board-zoom-debugboard.o
|
|
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \
|
|
board-zoom-peripherals.o \
|
|
board-flash.o \
|
|
hsmmc.o \
|
|
board-zoom-debugboard.o
|
|
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
|
|
board-zoom-peripherals.o \
|
|
board-flash.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
|
|
hsmmc.o
|
|
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
|
|
hsmmc.o
|
|
|
|
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
|
|
|
|
obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
|
|
hsmmc.o
|
|
# Platform specific device init code
|
|
usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
|
|
obj-y += $(usbfs-m) $(usbfs-y)
|
|
obj-y += usb-musb.o
|
|
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
|
|
obj-y += usb-ehci.o
|
|
|
|
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
|
|
obj-y += $(onenand-m) $(onenand-y)
|
|
|
|
nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
|
|
obj-y += $(nand-m) $(nand-y)
|
|
|
|
smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
|
|
obj-y += $(smc91x-m) $(smc91x-y)
|