34 lines
891 B
Plaintext
34 lines
891 B
Plaintext
Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
|
|
|
|
http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf
|
|
|
|
Required properties:
|
|
- compatible : should be "adi,adxl372"
|
|
- reg: the I2C address or SPI chip select number for the device
|
|
|
|
Required properties for SPI bus usage:
|
|
- spi-max-frequency: Max SPI frequency to use
|
|
|
|
Optional properties:
|
|
- interrupts: interrupt mapping for IRQ as documented in
|
|
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
|
|
|
Example for a I2C device node:
|
|
|
|
accelerometer@53 {
|
|
compatible = "adi,adxl372";
|
|
reg = <0x53>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|
|
|
|
Example for a SPI device node:
|
|
|
|
accelerometer@0 {
|
|
compatible = "adi,adxl372";
|
|
reg = <0>;
|
|
spi-max-frequency = <1000000>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
|
};
|