alistair23-linux/drivers/cpufreq/sc520_freq.c
Andi Kleen fa8031aefe cpufreq: Add support for x86 cpuinfo auto loading v4
This marks all the x86 cpuinfo tables to the CPU specific device drivers,
to allow auto loading by udev. This should simplify the distribution
startup scripts for this greatly.

I didn't add MODULE_DEVICE_IDs to the centrino and p4-clockmod drivers,
because those probably shouldn't be auto loaded and the acpi driver
be used instead (not fully sure on that, would appreciate feedback)

The old nforce drivers autoload based on the PCI ID.

ACPI cpufreq is autoloaded in another patch.

v3: Autoload gx based on PCI IDs only. Remove cpu check (Dave Jones)
v4: Use newly introduce HW_PSTATE feature for powernow-k8 loading

Cc: Dave Jones <davej@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26 16:49:06 -08:00

195 lines
4.1 KiB
C

/*
* sc520_freq.c: cpufreq driver for the AMD Elan sc520
*
* Copyright (C) 2005 Sean Young <sean@mess.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Based on elanfreq.c
*
* 2005-03-30: - initial revision
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/cpufreq.h>
#include <linux/timex.h>
#include <linux/io.h>
#include <asm/cpu_device_id.h>
#include <asm/msr.h>
#define MMCR_BASE 0xfffef000 /* The default base address */
#define OFFS_CPUCTL 0x2 /* CPU Control Register */
static __u8 __iomem *cpuctl;
#define PFX "sc520_freq: "
static struct cpufreq_frequency_table sc520_freq_table[] = {
{0x01, 100000},
{0x02, 133000},
{0, CPUFREQ_TABLE_END},
};
static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
{
u8 clockspeed_reg = *cpuctl;
switch (clockspeed_reg & 0x03) {
default:
printk(KERN_ERR PFX "error: cpuctl register has unexpected "
"value %02x\n", clockspeed_reg);
case 0x01:
return 100000;
case 0x02:
return 133000;
}
}
static void sc520_freq_set_cpu_state(unsigned int state)
{
struct cpufreq_freqs freqs;
u8 clockspeed_reg;
freqs.old = sc520_freq_get_cpu_frequency(0);
freqs.new = sc520_freq_table[state].frequency;
freqs.cpu = 0; /* AMD Elan is UP */
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
pr_debug("attempting to set frequency to %i kHz\n",
sc520_freq_table[state].frequency);
local_irq_disable();
clockspeed_reg = *cpuctl & ~0x03;
*cpuctl = clockspeed_reg | sc520_freq_table[state].index;
local_irq_enable();
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
};
static int sc520_freq_verify(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]);
}
static int sc520_freq_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
unsigned int newstate = 0;
if (cpufreq_frequency_table_target(policy, sc520_freq_table,
target_freq, relation, &newstate))
return -EINVAL;
sc520_freq_set_cpu_state(newstate);
return 0;
}
/*
* Module init and exit code
*/
static int sc520_freq_cpu_init(struct cpufreq_policy *policy)
{
struct cpuinfo_x86 *c = &cpu_data(0);
int result;
/* capability check */
if (c->x86_vendor != X86_VENDOR_AMD ||
c->x86 != 4 || c->x86_model != 9)
return -ENODEV;
/* cpuinfo and default policy values */
policy->cpuinfo.transition_latency = 1000000; /* 1ms */
policy->cur = sc520_freq_get_cpu_frequency(0);
result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table);
if (result)
return result;
cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu);
return 0;
}
static int sc520_freq_cpu_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_put_attr(policy->cpu);
return 0;
}
static struct freq_attr *sc520_freq_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
static struct cpufreq_driver sc520_freq_driver = {
.get = sc520_freq_get_cpu_frequency,
.verify = sc520_freq_verify,
.target = sc520_freq_target,
.init = sc520_freq_cpu_init,
.exit = sc520_freq_cpu_exit,
.name = "sc520_freq",
.owner = THIS_MODULE,
.attr = sc520_freq_attr,
};
static const struct x86_cpu_id sc520_ids[] = {
{ X86_VENDOR_AMD, 4, 9 },
{}
};
MODULE_DEVICE_TABLE(x86cpu, sc520_ids);
static int __init sc520_freq_init(void)
{
int err;
if (!x86_match_cpu(sc520_ids))
return -ENODEV;
cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
if (!cpuctl) {
printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
return -ENOMEM;
}
err = cpufreq_register_driver(&sc520_freq_driver);
if (err)
iounmap(cpuctl);
return err;
}
static void __exit sc520_freq_exit(void)
{
cpufreq_unregister_driver(&sc520_freq_driver);
iounmap(cpuctl);
}
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Sean Young <sean@mess.org>");
MODULE_DESCRIPTION("cpufreq driver for AMD's Elan sc520 CPU");
module_init(sc520_freq_init);
module_exit(sc520_freq_exit);