alistair23-linux/drivers/pwm/pwm-pxa.c
Thierry Reding c2d476a98f pwm: Check for negative duty-cycle and period
Make sure the duty-cycle and period passed in are not negative. This
should eventually be made implicit by making them unsigned. While at
it, the drivers' .config() implementations can have the equivalent
checks removed.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Axel Lin <axel.lin@gmail.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Jonghwan Choi <jhbird.choi@samsung.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: "Philip, Avinash" <avinashphilip@ti.com>
Cc: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
2012-10-05 20:56:43 +02:00

216 lines
4.7 KiB
C

/*
* drivers/pwm/pwm-pxa.c
*
* simple driver for PWM (Pulse Width Modulator) controller
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* 2008-02-13 initial version
* eric miao <eric.miao@marvell.com>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/pwm.h>
#include <asm/div64.h>
#define HAS_SECONDARY_PWM 0x10
#define PWM_ID_BASE(d) ((d) & 0xf)
static const struct platform_device_id pwm_id_table[] = {
/* PWM has_secondary_pwm? */
{ "pxa25x-pwm", 0 },
{ "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
{ "pxa168-pwm", 1 },
{ "pxa910-pwm", 1 },
{ },
};
MODULE_DEVICE_TABLE(platform, pwm_id_table);
/* PWM registers and bits definitions */
#define PWMCR (0x00)
#define PWMDCR (0x04)
#define PWMPCR (0x08)
#define PWMCR_SD (1 << 6)
#define PWMDCR_FD (1 << 10)
struct pxa_pwm_chip {
struct pwm_chip chip;
struct device *dev;
struct clk *clk;
int clk_enabled;
void __iomem *mmio_base;
};
static inline struct pxa_pwm_chip *to_pxa_pwm_chip(struct pwm_chip *chip)
{
return container_of(chip, struct pxa_pwm_chip, chip);
}
/*
* period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
* duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
*/
static int pxa_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
unsigned long long c;
unsigned long period_cycles, prescale, pv, dc;
unsigned long offset;
int rc;
offset = pwm->hwpwm ? 0x10 : 0;
c = clk_get_rate(pc->clk);
c = c * period_ns;
do_div(c, 1000000000);
period_cycles = c;
if (period_cycles < 1)
period_cycles = 1;
prescale = (period_cycles - 1) / 1024;
pv = period_cycles / (prescale + 1) - 1;
if (prescale > 63)
return -EINVAL;
if (duty_ns == period_ns)
dc = PWMDCR_FD;
else
dc = (pv + 1) * duty_ns / period_ns;
/* NOTE: the clock to PWM has to be enabled first
* before writing to the registers
*/
rc = clk_prepare_enable(pc->clk);
if (rc < 0)
return rc;
writel(prescale, pc->mmio_base + offset + PWMCR);
writel(dc, pc->mmio_base + offset + PWMDCR);
writel(pv, pc->mmio_base + offset + PWMPCR);
clk_disable_unprepare(pc->clk);
return 0;
}
static int pxa_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
int rc = 0;
if (!pc->clk_enabled) {
rc = clk_prepare_enable(pc->clk);
if (!rc)
pc->clk_enabled++;
}
return rc;
}
static void pxa_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
if (pc->clk_enabled) {
clk_disable_unprepare(pc->clk);
pc->clk_enabled--;
}
}
static struct pwm_ops pxa_pwm_ops = {
.config = pxa_pwm_config,
.enable = pxa_pwm_enable,
.disable = pxa_pwm_disable,
.owner = THIS_MODULE,
};
static int __devinit pwm_probe(struct platform_device *pdev)
{
const struct platform_device_id *id = platform_get_device_id(pdev);
struct pxa_pwm_chip *pwm;
struct resource *r;
int ret = 0;
pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
if (pwm == NULL) {
dev_err(&pdev->dev, "failed to allocate memory\n");
return -ENOMEM;
}
pwm->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(pwm->clk))
return PTR_ERR(pwm->clk);
pwm->clk_enabled = 0;
pwm->chip.dev = &pdev->dev;
pwm->chip.ops = &pxa_pwm_ops;
pwm->chip.base = -1;
pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
dev_err(&pdev->dev, "no memory resource defined\n");
return -ENODEV;
}
pwm->mmio_base = devm_request_and_ioremap(&pdev->dev, r);
if (pwm->mmio_base == NULL)
return -EADDRNOTAVAIL;
ret = pwmchip_add(&pwm->chip);
if (ret < 0) {
dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
return ret;
}
platform_set_drvdata(pdev, pwm);
return 0;
}
static int __devexit pwm_remove(struct platform_device *pdev)
{
struct pxa_pwm_chip *chip;
chip = platform_get_drvdata(pdev);
if (chip == NULL)
return -ENODEV;
return pwmchip_remove(&chip->chip);
}
static struct platform_driver pwm_driver = {
.driver = {
.name = "pxa25x-pwm",
.owner = THIS_MODULE,
},
.probe = pwm_probe,
.remove = __devexit_p(pwm_remove),
.id_table = pwm_id_table,
};
static int __init pwm_init(void)
{
return platform_driver_register(&pwm_driver);
}
arch_initcall(pwm_init);
static void __exit pwm_exit(void)
{
platform_driver_unregister(&pwm_driver);
}
module_exit(pwm_exit);
MODULE_LICENSE("GPL v2");