..
8250
serial: 8250: Support XR17V35x fraction divisor
2014-02-13 10:02:19 -08:00
cpm_uart
tty: delete non-required instances of include <linux/init.h>
2014-01-07 17:05:21 -08:00
jsm
TTY: jsm, remove superfluous check
2013-03-18 16:17:20 -07:00
21285.c
TTY: switch tty_flip_buffer_push
2013-01-15 22:30:15 -08:00
68328serial.c
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
2013-05-10 07:22:35 -07:00
altera_jtaguart.c
ARM: SoC DT updates for 3.12
2013-09-06 13:26:27 -07:00
altera_uart.c
ARM: SoC DT updates for 3.12
2013-09-06 13:26:27 -07:00
amba-pl010.c
serial: pl010: Convert to modern PM ops
2013-12-08 17:09:07 -08:00
amba-pl011.c
serial: pl011: fix fall back from DMA to interrupt mode
2013-12-17 09:36:23 -08:00
apbuart.c
tty: serial: apbuart: drop uart_port->lock before calling tty_flip_buffer_push()
2013-08-27 16:17:33 -07:00
apbuart.h
ar933x_uart.c
tty: ar933x_uart: add device tree support and binding documentation
2013-08-30 14:11:27 -07:00
arc_uart.c
serial: arc_uart: Remove casting the return value which is a void pointer
2013-09-26 14:29:58 -07:00
atmel_serial.c
tty/serial: at91: disable uart timer at start of shutdown
2014-01-13 15:55:59 -08:00
bcm63xx_uart.c
tty: serial: bcm63xx_uart: use linux/serial_bcm63xx.h
2014-01-23 13:02:36 +01:00
bfin_sport_uart.c
serial: bfin_sport_uart: Remove casting the return value which is a void pointer
2013-09-26 14:29:58 -07:00
bfin_sport_uart.h
bfin_uart.c
tty: Remove unnecessary semicolons
2013-10-16 13:08:16 -07:00
clps711x.c
serial: clps711x: Enable driver compilation with COMPILE_TEST
2014-01-07 17:06:18 -08:00
crisv10.c
treewide: fix comments and printk msgs
2014-01-07 15:06:07 +01:00
crisv10.h
crisv10: use counts from tty_port
2013-03-18 16:26:33 -07:00
dz.c
TTY: switch tty_flip_buffer_push
2013-01-15 22:30:15 -08:00
dz.h
efm32-uart.c
tty: serial: efm32: drop uart_port->lock before calling tty_flip_buffer_push()
2013-08-27 16:17:34 -07:00
fsl_lpuart.c
serial: fsl_lpuart: Return proper error on lpuart_serial_init error path
2013-07-26 16:01:20 -07:00
icom.c
serial: icom: dereference after free in load_code()
2013-12-08 17:16:05 -08:00
icom.h
ifx6x60.c
serial: ifx6x60: Remove casting the return value which is a void pointer
2013-09-26 14:29:58 -07:00
ifx6x60.h
serial:ifx6x60:Prevent data transfer when IFX6x60 port is shutdown
2012-11-01 08:50:01 -07:00
imx.c
serial: imx: add support for loopback mode.
2013-12-08 17:09:07 -08:00
ioc3_serial.c
TTY: switch tty_flip_buffer_push
2013-01-15 22:30:15 -08:00
ioc4_serial.c
serial: ioc4_serial: Staticize ioc4_serial_attach_one()
2013-08-12 11:35:32 -07:00
ip22zilog.c
tty: Remove unnecessary semicolons
2013-10-16 13:08:16 -07:00
ip22zilog.h
Kconfig
ARM: driver updates for 3.14
2014-01-23 18:49:36 -08:00
kgdb_nmi.c
tty: delete non-required instances of include <linux/init.h>
2014-01-07 17:05:21 -08:00
kgdboc.c
treewide: Convert retrun typos to return
2013-09-04 12:26:36 +02:00
lantiq.c
serial: MIPS: lantiq: fix clock error check
2013-08-12 11:37:48 -07:00
lpc32xx_hs.c
tty: serial: lpc32xx_hs: drop uart_port->lock before calling tty_flip_buffer_push()
2013-08-27 16:17:34 -07:00
m32r_sio.c
tty: serial: m32r_sio: drop uart_port->lock before calling tty_flip_buffer_push()
2013-08-27 16:17:34 -07:00
m32r_sio.h
m32r_sio_reg.h
Makefile
serial: Remove old SC26XX driver
2013-12-19 12:34:30 -08:00
max310x.c
tty: Remove unnecessary semicolons
2013-10-16 13:08:16 -07:00
max3100.c
serial: use dev_get_platdata()
2013-07-31 17:56:15 -07:00
mcf.c
tty: serial: mcf: drop uart_port->lock before calling tty_flip_buffer_push()
2013-08-27 16:17:34 -07:00
mfd.c
serial: mfd: Staticize local symbols
2013-10-29 16:34:11 -07:00
mpc52xx_uart.c
serial: mpc512x: setup the PSC FIFO clock as well
2014-01-12 18:53:05 +01:00
mpsc.c
serial: mpsc: Remove casting the return value which is a void pointer
2013-09-26 14:29:58 -07:00
mrst_max3110.c
mrst_max3110: fix unbalanced IRQ issue during resume
2013-10-29 16:26:54 -07:00
mrst_max3110.h
msm_serial.c
msm_serial: Send more than 1 character on the console w/ UARTDM
2013-08-27 16:22:59 -07:00
msm_serial.h
msm_serial: Make baud_code detection more dynamic
2013-07-26 16:13:29 -07:00
msm_serial_hs.c
serial: use dev_get_platdata()
2013-07-31 17:56:15 -07:00
msm_smd_tty.c
TTY: msm_smd_tty, clean up activate/shutdown
2013-03-18 16:19:44 -07:00
mux.c
TTY: switch tty_flip_buffer_push
2013-01-15 22:30:15 -08:00
mxs-auart.c
tty: serial: mxs-auart: Check the return value from clk_prepare_enable()
2013-12-08 17:14:58 -08:00
netx-serial.c
tty: serial: netx: drop uart_port->lock before calling tty_flip_buffer_push()
2013-08-27 16:17:34 -07:00
nwpserial.c
tty: serial: nwpserial: drop uart_port->lock before calling tty_flip_buffer_push()
2013-08-27 16:17:35 -07:00
of_serial.c
tty: delete non-required instances of include <linux/init.h>
2014-01-07 17:05:21 -08:00
omap-serial.c
serial: omap: fix rs485 probe on defered pinctrl
2014-02-13 09:57:33 -08:00
pch_uart.c
Merge branch 'fixes' into tty-next
2014-01-22 13:42:19 -08:00
pmac_zilog.c
TTY: pmac_zilog, check existence of ports in pmz_console_init()
2013-11-25 08:54:25 -08:00
pmac_zilog.h
pnx8xxx_uart.c
tty: serial: pnx8xxx: drop uart_port->lock before calling tty_flip_buffer_push()
2013-08-27 16:17:35 -07:00
pxa.c
serial: pxa: Staticize local symbols
2013-08-12 11:10:16 -07:00
rp2.c
tty: remove DEFINE_PCI_DEVICE_TABLE macro
2013-12-08 17:09:07 -08:00
sa1100.c
serial: sa1100: delete .set_wake callback
2013-10-16 13:16:18 -07:00
samsung.c
serial: samsung: move clock deactivation below uart registration
2013-12-08 17:16:05 -08:00
samsung.h
serial: samsung: Remove casting the return value which is a void pointer
2013-09-26 14:29:59 -07:00
sb1250-duart.c
TTY: switch tty_flip_buffer_push
2013-01-15 22:30:15 -08:00
sccnxp.c
serial: sccnxp: missing uart_unregister_driver() on error in sccnxp_probe()
2013-09-26 15:44:45 -07:00
serial-tegra.c
serial: tegra: convert to standard DMA DT bindings
2013-12-11 16:44:35 -07:00
serial_core.c
serial_core: Don't re-initialize a previously initialized spinlock.
2013-12-08 16:44:21 -08:00
serial_ks8695.c
TTY: switch tty_flip_buffer_push
2013-01-15 22:30:15 -08:00
serial_txx9.c
serial: txx9: remove unnecessary pci_set_drvdata()
2013-09-26 15:41:38 -07:00
sh-sci.c
serial: sh-sci: Add OF support
2013-12-24 21:50:54 +09:00
sh-sci.h
serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
2013-12-24 11:17:48 +09:00
sirfsoc_uart.c
serial: sirf: fix kernel panic caused by unpaired spinlock
2014-02-13 10:02:19 -08:00
sirfsoc_uart.h
serial: sirf: remove duplicate defines
2013-10-29 16:26:54 -07:00
sn_console.c
TTY: switch tty_flip_buffer_push
2013-01-15 22:30:15 -08:00
st-asc.c
serial: st-asc: remove unnecessary platform_set_drvdata()
2013-08-27 16:24:33 -07:00
suncore.c
sunhv.c
serial: use platform_{get,set}_drvdata()
2013-06-03 10:21:33 -07:00
sunsab.c
tty: Remove unnecessary semicolons
2013-10-16 13:08:16 -07:00
sunsab.h
sunsu.c
tty: Remove unnecessary semicolons
2013-10-16 13:08:16 -07:00
sunzilog.c
tty: Remove unnecessary semicolons
2013-10-16 13:08:16 -07:00
sunzilog.h
tilegx.c
tilegx: Add tty serial support for TILE-Gx on-chip UART
2013-09-03 14:50:40 -04:00
timbuart.c
serial: timbuart: Staticize local symbols
2013-08-12 11:35:31 -07:00
timbuart.h
uartlite.c
tty: serial: uartlite: Support uartlite on big and little endian systems
2013-02-13 08:38:45 -08:00
ucc_uart.c
DeviceTree updates for 3.13. This is a bit larger pull request than
2013-11-12 16:52:17 +09:00
vr41xx_siu.c
serial: use dev_get_platdata()
2013-07-31 17:56:15 -07:00
vt8500_serial.c
serial: vt8500: add missing braces
2013-10-16 13:22:16 -07:00
xilinx_uartps.c
tty: xuartps: Properly guard sysrq specific code
2013-12-17 16:02:25 -08:00
zs.c
TTY: switch tty_flip_buffer_push
2013-01-15 22:30:15 -08:00
zs.h
45a7bd6359