825f4e0271
A quite large set of SoC updates this cycle. In no particular order:
- Multi-cluster power management for Samsung Exynos, adding support for
big.LITTLE CPU switching on EXYNOS5
- SMP support for Marvell Armada 375 and 38x
- SMP rework on Allwinner A31
- Xilinx Zynq support for SOC_BUS, big endian
- Marvell orion5x platform cleanup, modernizing the implementation and
moving to DT.
- _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
that their platform can be enabled in the same kernel binary as most
of the other v7 platforms in the tree. \o/ The work isn't quite complete,
there's some driver fixes still needed, but the basics now work.
New SoC support added:
- Freescale i.MX6SX
- LSI Axxia AXM55xx SoCs
- Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800
- STi STIH407
Plus a large set of various smaller updates for different platforms. I'm
probably missing some important one here.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=6LYI
-----END PGP SIGNATURE-----
Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next
Pull part one of ARM SoC updates from Olof Johansson:
"A quite large set of SoC updates this cycle. In no particular order:
- Multi-cluster power management for Samsung Exynos, adding support
for big.LITTLE CPU switching on EXYNOS5
- SMP support for Marvell Armada 375 and 38x
- SMP rework on Allwinner A31
- Xilinx Zynq support for SOC_BUS, big endian
- Marvell orion5x platform cleanup, modernizing the implementation
and moving to DT.
- _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
that their platform can be enabled in the same kernel binary as
most of the other v7 platforms in the tree. \o/
The work isn't quite complete, there's some driver fixes still
needed, but the basics now work.
New SoC support added:
- Freescale i.MX6SX
- LSI Axxia AXM55xx SoCs
- Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800
- STi STIH407
plus a large set of various smaller updates for different platforms.
I'm probably missing some important one here"
* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
ARM: exynos: don't run exynos4 l2x0 setup on other platforms
ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
ARM: EXYNOS: mcpm rename the power_down_finish
ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
ARM: EXYNOS: Enable multi-platform build support
ARM: EXYNOS: Consolidate Kconfig entries
ARM: EXYNOS: Add support for EXYNOS5410 SoC
ARM: EXYNOS: Support secondary CPU boot of Exynos3250
ARM: EXYNOS: Add Exynos3250 SoC ID
ARM: EXYNOS: Add 5800 SoC support
ARM: EXYNOS: initial board support for exynos5260 SoC
clk: exynos5410: register clocks using common clock framework
ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
ARM: sunxi: allow building without reset controller
Documentation: devicetree: arm: sort enable-method entries
ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
ARM: dts: axxia: Add reset controller
power: reset: Add Axxia system reset driver
ARM: axxia: Adding defconfig for AXM55xx
...
790 lines
21 KiB
Plaintext
790 lines
21 KiB
Plaintext
config ARCH_MXC
|
|
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
|
|
select ARCH_HAS_CPUFREQ
|
|
select ARCH_HAS_OPP
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select ARM_CPU_SUSPEND if PM
|
|
select CLKSRC_MMIO
|
|
select GENERIC_IRQ_CHIP
|
|
select PINCTRL
|
|
select PM_OPP if PM
|
|
select SOC_BUS
|
|
select SRAM
|
|
help
|
|
Support for Freescale MXC/iMX-based family of processors
|
|
|
|
menu "Freescale i.MX support"
|
|
depends on ARCH_MXC
|
|
|
|
config MXC_TZIC
|
|
bool
|
|
|
|
config MXC_AVIC
|
|
bool
|
|
|
|
config MXC_DEBUG_BOARD
|
|
bool "Enable MXC debug board(for 3-stack)"
|
|
help
|
|
The debug board is an integral part of the MXC 3-stack(PDK)
|
|
platforms, it can be attached or removed from the peripheral
|
|
board. On debug board, several debug devices(ethernet, UART,
|
|
buttons, LEDs and JTAG) are implemented. Between the MCU and
|
|
these devices, a CPLD is added as a bridge which performs
|
|
data/address de-multiplexing and decode, signal level shift,
|
|
interrupt control and various board functions.
|
|
|
|
config HAVE_EPIT
|
|
bool
|
|
|
|
config MXC_USE_EPIT
|
|
bool "Use EPIT instead of GPT"
|
|
depends on HAVE_EPIT
|
|
help
|
|
Use EPIT as the system timer on systems that have it. Normally you
|
|
don't have a reason to do so as the EPIT has the same features and
|
|
uses the same clocks as the GPT. Anyway, on some systems the GPT
|
|
may be in use for other purposes.
|
|
|
|
config ARCH_HAS_RNGA
|
|
bool
|
|
|
|
config HAVE_IMX_ANATOP
|
|
bool
|
|
|
|
config HAVE_IMX_GPC
|
|
bool
|
|
|
|
config HAVE_IMX_MMDC
|
|
bool
|
|
|
|
config HAVE_IMX_SRC
|
|
def_bool y if SMP
|
|
select ARCH_HAS_RESET_CONTROLLER
|
|
|
|
config IMX_HAVE_IOMUX_V1
|
|
bool
|
|
|
|
config ARCH_MXC_IOMUX_V3
|
|
bool
|
|
|
|
config ARCH_MX1
|
|
bool
|
|
|
|
config ARCH_MX25
|
|
bool
|
|
|
|
config MACH_MX27
|
|
bool
|
|
|
|
config SOC_IMX1
|
|
bool
|
|
select ARCH_MX1
|
|
select CPU_ARM920T
|
|
select IMX_HAVE_IOMUX_V1
|
|
select MXC_AVIC
|
|
|
|
config SOC_IMX21
|
|
bool
|
|
select CPU_ARM926T
|
|
select IMX_HAVE_IOMUX_V1
|
|
select MXC_AVIC
|
|
|
|
config SOC_IMX25
|
|
bool
|
|
select ARCH_MX25
|
|
select ARCH_MXC_IOMUX_V3
|
|
select CPU_ARM926T
|
|
select MXC_AVIC
|
|
select PINCTRL_IMX25
|
|
|
|
config SOC_IMX27
|
|
bool
|
|
select ARCH_HAS_CPUFREQ
|
|
select ARCH_HAS_OPP
|
|
select CPU_ARM926T
|
|
select IMX_HAVE_IOMUX_V1
|
|
select MACH_MX27
|
|
select MXC_AVIC
|
|
select PINCTRL_IMX27
|
|
|
|
config SOC_IMX31
|
|
bool
|
|
select CPU_V6
|
|
select IMX_HAVE_PLATFORM_MXC_RNGA
|
|
select MXC_AVIC
|
|
select SMP_ON_UP if SMP
|
|
|
|
config SOC_IMX35
|
|
bool
|
|
select ARCH_MXC_IOMUX_V3
|
|
select HAVE_EPIT
|
|
select MXC_AVIC
|
|
select PINCTRL_IMX35
|
|
select SMP_ON_UP if SMP
|
|
|
|
config SOC_IMX5
|
|
bool
|
|
select ARCH_HAS_CPUFREQ
|
|
select ARCH_HAS_OPP
|
|
select ARCH_MXC_IOMUX_V3
|
|
select MXC_TZIC
|
|
|
|
config SOC_IMX51
|
|
bool
|
|
select HAVE_IMX_SRC
|
|
select PINCTRL_IMX51
|
|
select SOC_IMX5
|
|
|
|
if ARCH_MULTI_V4T
|
|
|
|
comment "MX1 platforms:"
|
|
config MACH_MXLADS
|
|
bool
|
|
|
|
config ARCH_MX1ADS
|
|
bool "MX1ADS platform"
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select MACH_MXLADS
|
|
select SOC_IMX1
|
|
help
|
|
Say Y here if you are using Motorola MX1ADS/MXLADS boards
|
|
|
|
config MACH_SCB9328
|
|
bool "Synertronixx scb9328"
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX1
|
|
help
|
|
Say Y here if you are using a Synertronixx scb9328 board
|
|
|
|
config MACH_APF9328
|
|
bool "APF9328"
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX1
|
|
help
|
|
Say Yes here if you are using the Armadeus APF9328 development board
|
|
|
|
endif
|
|
|
|
if ARCH_MULTI_V5
|
|
|
|
comment "MX21 platforms:"
|
|
|
|
config MACH_MX21ADS
|
|
bool "MX21ADS platform"
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select SOC_IMX21
|
|
help
|
|
Include support for MX21ADS platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
comment "MX25 platforms:"
|
|
|
|
config MACH_MX25_3DS
|
|
bool "Support MX25PDK (3DS) Platform"
|
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMXDI_RTC
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select SOC_IMX25
|
|
|
|
config MACH_EUKREA_CPUIMX25SD
|
|
bool "Support Eukrea CPUIMX25 Platform"
|
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMXDI_RTC
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX25
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_EUKREA_CPUIMX25SD
|
|
default MACH_EUKREA_MBIMXSD25_BASEBOARD
|
|
|
|
config MACH_EUKREA_MBIMXSD25_BASEBOARD
|
|
bool "Eukrea MBIMXSD development board"
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
This adds board specific devices that can be found on Eukrea's
|
|
MBIMXSD evaluation board.
|
|
|
|
endchoice
|
|
|
|
config MACH_IMX25_DT
|
|
bool "Support i.MX25 platforms from device tree"
|
|
select SOC_IMX25
|
|
help
|
|
Include support for Freescale i.MX25 based platforms
|
|
using the device tree for discovery
|
|
|
|
comment "MX27 platforms:"
|
|
|
|
config MACH_MX27ADS
|
|
bool "MX27ADS platform"
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select SOC_IMX27
|
|
help
|
|
Include support for MX27ADS platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_PCM038
|
|
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX27
|
|
help
|
|
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
|
|
includes specific configurations for the module and its peripherals.
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_PCM038
|
|
default MACH_PCM970_BASEBOARD
|
|
|
|
config MACH_PCM970_BASEBOARD
|
|
bool "PHYTEC PCM970 development board"
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
help
|
|
This adds board specific devices that can be found on Phytec's
|
|
PCM970 evaluation board.
|
|
|
|
endchoice
|
|
|
|
config MACH_CPUIMX27
|
|
bool "Eukrea CPUIMX27 module"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX27
|
|
help
|
|
Include support for Eukrea CPUIMX27 platform. This includes
|
|
specific configurations for the module and its peripherals.
|
|
|
|
config MACH_EUKREA_CPUIMX27_USESDHC2
|
|
bool "CPUIMX27 integrates SDHC2 module"
|
|
depends on MACH_CPUIMX27
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
help
|
|
This adds support for the internal SDHC2 used on CPUIMX27
|
|
for wifi or eMMC.
|
|
|
|
config MACH_EUKREA_CPUIMX27_USEUART4
|
|
bool "CPUIMX27 integrates UART4 module"
|
|
depends on MACH_CPUIMX27
|
|
help
|
|
This adds support for the internal UART4 used on CPUIMX27
|
|
for bluetooth.
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_CPUIMX27
|
|
default MACH_EUKREA_MBIMX27_BASEBOARD
|
|
|
|
config MACH_EUKREA_MBIMX27_BASEBOARD
|
|
bool "Eukrea MBIMX27 development board"
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
This adds board specific devices that can be found on Eukrea's
|
|
MBIMX27 evaluation board.
|
|
|
|
endchoice
|
|
|
|
config MACH_MX27_3DS
|
|
bool "MX27PDK platform"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MX2_CAMERA
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select MXC_DEBUG_BOARD
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX27
|
|
help
|
|
Include support for MX27PDK platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_IMX27_VISSTRIM_M10
|
|
bool "Vista Silicon i.MX27 Visstrim_m10"
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MX2_CAMERA
|
|
select IMX_HAVE_PLATFORM_MX2_EMMA
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select LEDS_GPIO_REGISTER
|
|
select SOC_IMX27
|
|
help
|
|
Include support for Visstrim_m10 platform and its different variants.
|
|
This includes specific configurations for the board and its
|
|
peripherals.
|
|
|
|
config MACH_IMX27LITE
|
|
bool "LogicPD MX27 LITEKIT platform"
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX27
|
|
help
|
|
Include support for MX27 LITEKIT platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_PCA100
|
|
bool "Phytec phyCARD-s (pca100)"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX27
|
|
help
|
|
Include support for phyCARD-s (aka pca100) platform. This
|
|
includes specific configurations for the module and its peripherals.
|
|
|
|
config MACH_MXT_TD60
|
|
bool "Maxtrack i-MXT TD60"
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select SOC_IMX27
|
|
help
|
|
Include support for i-MXT (aka td60) platform. This
|
|
includes specific configurations for the module and its peripherals.
|
|
|
|
config MACH_IMX27IPCAM
|
|
bool "IMX27 IPCAM platform"
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX27
|
|
help
|
|
Include support for IMX27 IPCAM platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_IMX27_DT
|
|
bool "Support i.MX27 platforms from device tree"
|
|
select SOC_IMX27
|
|
help
|
|
Include support for Freescale i.MX27 based platforms
|
|
using the device tree for discovery
|
|
|
|
endif
|
|
|
|
if ARCH_MULTI_V6
|
|
|
|
comment "MX31 platforms:"
|
|
|
|
config MACH_MX31ADS
|
|
bool "Support MX31ADS platforms"
|
|
default y
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX31
|
|
help
|
|
Include support for MX31ADS platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_MX31ADS_WM1133_EV1
|
|
bool "Support Wolfson Microelectronics 1133-EV1 module"
|
|
depends on MACH_MX31ADS
|
|
depends on MFD_WM8350_I2C
|
|
depends on REGULATOR_WM8350 = y
|
|
help
|
|
Include support for the Wolfson Microelectronics 1133-EV1 PMU
|
|
and audio module for the MX31ADS platform.
|
|
|
|
config MACH_MX31LILLY
|
|
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX31
|
|
help
|
|
Include support for mx31 based LILLY1131 modules. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_MX31LITE
|
|
bool "Support MX31 LITEKIT (LogicPD)"
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_RTC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX31
|
|
help
|
|
Include support for MX31 LITEKIT platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_PCM037
|
|
bool "Support Phytec pcm037 (i.MX31) platforms"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX31
|
|
help
|
|
Include support for Phytec pcm037 platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_PCM037_EET
|
|
bool "Support pcm037 EET board extensions"
|
|
depends on MACH_PCM037
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
help
|
|
Add support for PCM037 EET baseboard extensions. If you are using the
|
|
OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
|
|
command-line parameter.
|
|
|
|
config MACH_MX31_3DS
|
|
bool "Support MX31PDK (3DS)"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select MXC_DEBUG_BOARD
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX31
|
|
help
|
|
Include support for MX31PDK (3DS) platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_MX31_3DS_MXC_NAND_USE_BBT
|
|
bool "Make the MXC NAND driver use the in flash Bad Block Table"
|
|
depends on MACH_MX31_3DS
|
|
depends on MTD_NAND_MXC
|
|
help
|
|
Enable this if you want that the MXC NAND driver uses the in flash
|
|
Bad Block Table to know what blocks are bad instead of scanning the
|
|
entire flash looking for bad block markers.
|
|
|
|
config MACH_MX31MOBOARD
|
|
bool "Support mx31moboard platforms (EPFL Mobots group)"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX31
|
|
help
|
|
Include support for mx31moboard platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_QONG
|
|
bool "Support Dave/DENX QongEVB-LITE platform"
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX31
|
|
help
|
|
Include support for Dave/DENX QongEVB-LITE platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_ARMADILLO5X0
|
|
bool "Support Atmark Armadillo-500 Development Base Board"
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX31
|
|
help
|
|
Include support for Atmark Armadillo-500 platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_KZM_ARM11_01
|
|
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX31
|
|
help
|
|
Include support for KZM-ARM11-01. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_BUG
|
|
bool "Support Buglabs BUGBase platform"
|
|
default y
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX31
|
|
help
|
|
Include support for BUGBase 1.3 platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_IMX31_DT
|
|
bool "Support i.MX31 platforms from device tree"
|
|
select SOC_IMX31
|
|
help
|
|
Include support for Freescale i.MX31 based platforms
|
|
using the device tree for discovery.
|
|
|
|
comment "MX35 platforms:"
|
|
|
|
config MACH_IMX35_DT
|
|
bool "Support i.MX35 platforms from device tree"
|
|
select SOC_IMX35
|
|
help
|
|
Include support for Freescale i.MX35 based platforms
|
|
using the device tree for discovery.
|
|
|
|
config MACH_PCM043
|
|
bool "Support Phytec pcm043 (i.MX35) platforms"
|
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX35
|
|
help
|
|
Include support for Phytec pcm043 platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_MX35_3DS
|
|
bool "Support MX35PDK platform"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_RTC
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select MXC_DEBUG_BOARD
|
|
select SOC_IMX35
|
|
help
|
|
Include support for MX35PDK platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_EUKREA_CPUIMX35SD
|
|
bool "Support Eukrea CPUIMX35 Platform"
|
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX35
|
|
help
|
|
Include support for Eukrea CPUIMX35 platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_EUKREA_CPUIMX35SD
|
|
default MACH_EUKREA_MBIMXSD35_BASEBOARD
|
|
|
|
config MACH_EUKREA_MBIMXSD35_BASEBOARD
|
|
bool "Eukrea MBIMXSD development board"
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
This adds board specific devices that can be found on Eukrea's
|
|
MBIMXSD evaluation board.
|
|
|
|
endchoice
|
|
|
|
config MACH_VPR200
|
|
bool "Support VPR200 platform"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select SOC_IMX35
|
|
help
|
|
Include support for VPR200 platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
endif
|
|
|
|
if ARCH_MULTI_V7
|
|
|
|
comment "Device tree only"
|
|
|
|
config SOC_IMX50
|
|
bool "i.MX50 support"
|
|
select HAVE_IMX_SRC
|
|
select PINCTRL_IMX50
|
|
select SOC_IMX5
|
|
|
|
help
|
|
This enables support for Freescale i.MX50 processor.
|
|
|
|
config MACH_IMX51_DT
|
|
bool "i.MX51 support"
|
|
select SOC_IMX51
|
|
help
|
|
This enables support for Freescale i.MX51 processor
|
|
|
|
config SOC_IMX53
|
|
bool "i.MX53 support"
|
|
select HAVE_IMX_SRC
|
|
select PINCTRL_IMX53
|
|
select SOC_IMX5
|
|
|
|
help
|
|
This enables support for Freescale i.MX53 processor.
|
|
|
|
config SOC_IMX6
|
|
bool
|
|
select ARM_ERRATA_754322
|
|
select ARM_ERRATA_775420
|
|
select ARM_GIC
|
|
select HAVE_IMX_ANATOP
|
|
select HAVE_IMX_GPC
|
|
select HAVE_IMX_MMDC
|
|
select HAVE_IMX_SRC
|
|
select MFD_SYSCON
|
|
select PL310_ERRATA_588369 if CACHE_PL310
|
|
select PL310_ERRATA_727915 if CACHE_PL310
|
|
select PL310_ERRATA_769419 if CACHE_PL310
|
|
|
|
config SOC_IMX6Q
|
|
bool "i.MX6 Quad/DualLite support"
|
|
select ARM_ERRATA_764369 if SMP
|
|
select HAVE_ARM_SCU if SMP
|
|
select HAVE_ARM_TWD if SMP
|
|
select PCI_DOMAINS if PCI
|
|
select PINCTRL_IMX6Q
|
|
select SOC_IMX6
|
|
|
|
help
|
|
This enables support for Freescale i.MX6 Quad processor.
|
|
|
|
config SOC_IMX6SL
|
|
bool "i.MX6 SoloLite support"
|
|
select PINCTRL_IMX6SL
|
|
select SOC_IMX6
|
|
|
|
help
|
|
This enables support for Freescale i.MX6 SoloLite processor.
|
|
|
|
config SOC_IMX6SX
|
|
bool "i.MX6 SoloX support"
|
|
select PINCTRL_IMX6SX
|
|
select SOC_IMX6
|
|
|
|
help
|
|
This enables support for Freescale i.MX6 SoloX processor.
|
|
|
|
config SOC_VF610
|
|
bool "Vybrid Family VF610 support"
|
|
select ARM_GIC
|
|
select PINCTRL_VF610
|
|
select VF_PIT_TIMER
|
|
select PL310_ERRATA_588369 if CACHE_PL310
|
|
select PL310_ERRATA_727915 if CACHE_PL310
|
|
select PL310_ERRATA_769419 if CACHE_PL310
|
|
|
|
help
|
|
This enable support for Freescale Vybrid VF610 processor.
|
|
|
|
endif
|
|
|
|
source "arch/arm/mach-imx/devices/Kconfig"
|
|
|
|
endmenu
|