alistair23-linux/arch/arm/mach-mvebu/Kconfig
Linus Torvalds 825f4e0271 ARM: SoC updates for 3.16 (part 1)
A quite large set of SoC updates this cycle. In no particular order:
 
 - Multi-cluster power management for Samsung Exynos, adding support for
   big.LITTLE CPU switching on EXYNOS5
 - SMP support for Marvell Armada 375 and 38x
 - SMP rework on Allwinner A31
 - Xilinx Zynq support for SOC_BUS, big endian
 - Marvell orion5x platform cleanup, modernizing the implementation and
   moving to DT.
 - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
   that their platform can be enabled in the same kernel binary as most
   of the other v7 platforms in the tree. \o/ The work isn't quite complete,
   there's some driver fixes still needed, but the basics now work.
 
 New SoC support added:
 - Freescale i.MX6SX
 - LSI Axxia AXM55xx SoCs
 - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800
 - STi STIH407
 
 Plus a large set of various smaller updates for different platforms. I'm
 probably missing some important one here.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjOKWAAoJEIwa5zzehBx36aEP/2vTD7x9FC59FACNHJ8iO7aw
 0ebTgBBjI1Np6X18O+M7URbxV5TaBgwpUm/NDN86p03MpQ2eOXr8r47qVxe/HhZs
 AdlTvzgE6QwxcVL/HeCKKUEN3BPH74+TZgFl9I5aSzNjpR39xETeK1aWP/ZiAl/q
 /lGRZAQ59+c7Ung00Hg0g2YDxH9WFpK50Nj90ROnyjKSFkhIYngXYVpZB3maOypq
 Pgib/U8IraKZ52oGJw3yinSoORr7FdcUdAGWGTz/lQdNL/jYDfQ6GkRW2oblWXdt
 3Xvj9UW6NmkbMICucMvFuuW1nXAgutZuTp9w7mBxsiUlYepxPv/DXM6yiI1WGlEb
 BeVOmOreNeN2nT6avv/uUhk3Osq63Jn9x8cz5y+7/lgWQwllh3/c+G01RotvgJEQ
 vpQq5ps9fMxIAMaNP6N/YqMJI1IOrBj0iXxaZEDw3VYM/k4lSvtb3VXP9c/rqApu
 U4i6hpSIGzrraU4NrjndYPndcLeNOVZbByETQKosZXuCo6G1sb7FstNSkzI9vSo8
 O/pujIVUfYyBW82GzZGDw+aa7DWA29FPeUQ3p+sj5MSCg051xXT8h6QwqMo2K/zY
 5ATs/qo6w7zH/Ou9rtHTRynCIb0GQJThDSlWtuXFedUF9quEltS+TDz/2o+dWtGJ
 yBFGKDRuBB20D36w9xqg
 =6LYI
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull part one of ARM SoC updates from Olof Johansson:
 "A quite large set of SoC updates this cycle.  In no particular order:

   - Multi-cluster power management for Samsung Exynos, adding support
     for big.LITTLE CPU switching on EXYNOS5

   - SMP support for Marvell Armada 375 and 38x

   - SMP rework on Allwinner A31

   - Xilinx Zynq support for SOC_BUS, big endian

   - Marvell orion5x platform cleanup, modernizing the implementation
     and moving to DT.

   - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
     that their platform can be enabled in the same kernel binary as
     most of the other v7 platforms in the tree.  \o/

     The work isn't quite complete, there's some driver fixes still
     needed, but the basics now work.

  New SoC support added:

   - Freescale i.MX6SX

   - LSI Axxia AXM55xx SoCs

   - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800

   - STi STIH407

  plus a large set of various smaller updates for different platforms.
  I'm probably missing some important one here"

* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
  ARM: exynos: don't run exynos4 l2x0 setup on other platforms
  ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
  ARM: EXYNOS: mcpm rename the power_down_finish
  ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
  ARM: EXYNOS: Enable multi-platform build support
  ARM: EXYNOS: Consolidate Kconfig entries
  ARM: EXYNOS: Add support for EXYNOS5410 SoC
  ARM: EXYNOS: Support secondary CPU boot of Exynos3250
  ARM: EXYNOS: Add Exynos3250 SoC ID
  ARM: EXYNOS: Add 5800 SoC support
  ARM: EXYNOS: initial board support for exynos5260 SoC
  clk: exynos5410: register clocks using common clock framework
  ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
  ARM: sunxi: allow building without reset controller
  Documentation: devicetree: arm: sort enable-method entries
  ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
  clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
  ARM: dts: axxia: Add reset controller
  power: reset: Add Axxia system reset driver
  ARM: axxia: Adding defconfig for AXM55xx
  ...
2014-06-02 16:15:12 -07:00

103 lines
2.5 KiB
Plaintext

config ARCH_MVEBU
bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select PINCTRL
select PLAT_ORION
select SOC_BUS
select MVEBU_MBUS
select ZONE_DMA if ARM_LPAE
select ARCH_REQUIRE_GPIOLIB
select PCI_QUIRKS if PCI
if ARCH_MVEBU
menu "Marvell EBU SoC variants"
config MACH_MVEBU_V7
bool
select ARMADA_370_XP_TIMER
select CACHE_L2X0
config MACH_ARMADA_370
bool "Marvell Armada 370 boards" if ARCH_MULTI_V7
select ARMADA_370_CLK
select CPU_PJ4B
select MACH_MVEBU_V7
select PINCTRL_ARMADA_370
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 370 SoC with device tree.
config MACH_ARMADA_375
bool "Marvell Armada 375 boards" if ARCH_MULTI_V7
select ARM_ERRATA_720789
select ARM_ERRATA_753970
select ARM_GIC
select ARMADA_375_CLK
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_375
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 375 SoC with device tree.
config MACH_ARMADA_38X
bool "Marvell Armada 380/385 boards" if ARCH_MULTI_V7
select ARM_ERRATA_720789
select ARM_ERRATA_753970
select ARM_GIC
select ARMADA_38X_CLK
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
select HAVE_SMP
select MACH_MVEBU_V7
select PINCTRL_ARMADA_38X
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada 380/385 SoC with device tree.
config MACH_ARMADA_XP
bool "Marvell Armada XP boards" if ARCH_MULTI_V7
select ARMADA_XP_CLK
select CPU_PJ4B
select MACH_MVEBU_V7
select PINCTRL_ARMADA_XP
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Armada XP SoC with device tree.
config MACH_DOVE
bool "Marvell Dove boards" if ARCH_MULTI_V7
select CACHE_L2X0
select CPU_PJ4
select DOVE_CLK
select ORION_IRQCHIP
select ORION_TIMER
select PINCTRL_DOVE
help
Say 'Y' here if you want your kernel to support the
Marvell Dove using flattened device tree.
config MACH_KIRKWOOD
bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select KIRKWOOD_CLK
select ORION_IRQCHIP
select ORION_TIMER
select PCI
select PCI_QUIRKS
select PINCTRL_KIRKWOOD
help
Say 'Y' here if you want your kernel to support boards based
on the Marvell Kirkwood device tree.
endmenu
endif