redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/mach-sa1100/generic.c
Viresh Kumar 9c0ebcf78f cpufreq: Implement light weight ->target_index() routine 
Currently, the prototype of cpufreq_drivers target routines is:

int target(struct cpufreq_policy *policy, unsigned int target_freq,
		unsigned int relation);

And most of the drivers call cpufreq_frequency_table_target() to get a valid
index of their frequency table which is closest to the target_freq. And they
don't use target_freq and relation after that.

So, it makes sense to just do this work in cpufreq core before calling
cpufreq_frequency_table_target() and simply pass index instead. But this can be
done only with drivers which expose their frequency table with cpufreq core. For
others we need to stick with the old prototype of target() until those drivers
are converted to expose frequency tables.

This patch implements the new light weight prototype for target_index() routine.
It looks like this:

int target_index(struct cpufreq_policy *policy, unsigned int index);

CPUFreq core will call cpufreq_frequency_table_target() before calling this
routine and pass index to it. Because CPUFreq core now requires to call routines
present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time.

This also marks target() interface as deprecated. So, that new drivers avoid
using it. And Documentation is updated accordingly.

It also converts existing .target() to newly defined light weight
.target_index() routine for many driver.

Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King <linux@arm.linux.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
2013-10-25 22:42:24 +02:00

413 lines
9.7 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-sa1100/generic.c
*
* Author: Nicolas Pitre
*
* Code common to all SA11x0 machines.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/pm.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <video/sa1100fb.h>
#include <asm/div64.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <asm/irq.h>
#include <asm/system_misc.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include "generic.h"
unsigned int reset_status;
EXPORT_SYMBOL(reset_status);
#define NR_FREQS 16
/*
* This table is setup for a 3.6864MHz Crystal.
*/
struct cpufreq_frequency_table sa11x0_freq_table[NR_FREQS+1] = {
{ .frequency = 59000, /* 59.0 MHz */},
{ .frequency = 73700, /* 73.7 MHz */},
{ .frequency = 88500, /* 88.5 MHz */},
{ .frequency = 103200, /* 103.2 MHz */},
{ .frequency = 118000, /* 118.0 MHz */},
{ .frequency = 132700, /* 132.7 MHz */},
{ .frequency = 147500, /* 147.5 MHz */},
{ .frequency = 162200, /* 162.2 MHz */},
{ .frequency = 176900, /* 176.9 MHz */},
{ .frequency = 191700, /* 191.7 MHz */},
{ .frequency = 206400, /* 206.4 MHz */},
{ .frequency = 221200, /* 221.2 MHz */},
{ .frequency = 235900, /* 235.9 MHz */},
{ .frequency = 250700, /* 250.7 MHz */},
{ .frequency = 265400, /* 265.4 MHz */},
{ .frequency = 280200, /* 280.2 MHz */},
{ .frequency = CPUFREQ_TABLE_END, },
};
unsigned int sa11x0_getspeed(unsigned int cpu)
{
if (cpu)
return 0;
return sa11x0_freq_table[PPCR & 0xf].frequency;
}
/*
* Default power-off for SA1100
*/
static void sa1100_power_off(void)
{
mdelay(100);
local_irq_disable();
/* disable internal oscillator, float CS lines */
PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
/* enable wake-up on GPIO0 (Assabet...) */
PWER = GFER = GRER = 1;
/*
* set scratchpad to zero, just in case it is used as a
* restart address by the bootloader.
*/
PSPR = 0;
/* enter sleep mode */
PMCR = PMCR_SF;
}
void sa11x0_restart(enum reboot_mode mode, const char *cmd)
{
if (mode == REBOOT_SOFT) {
/* Jump into ROM at address 0 */
soft_restart(0);
} else {
/* Use on-chip reset capability */
RSRR = RSRR_SWR;
}
}
static void sa11x0_register_device(struct platform_device *dev, void *data)
{
int err;
dev->dev.platform_data = data;
err = platform_device_register(dev);
if (err)
printk(KERN_ERR "Unable to register device %s: %d\n",
dev->name, err);
}
static struct resource sa11x0udc_resources[] = {
[0] = DEFINE_RES_MEM(__PREG(Ser0UDCCR), SZ_64K),
[1] = DEFINE_RES_IRQ(IRQ_Ser0UDC),
};
static u64 sa11x0udc_dma_mask = 0xffffffffUL;
static struct platform_device sa11x0udc_device = {
.name = "sa11x0-udc",
.id = -1,
.dev = {
.dma_mask = &sa11x0udc_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(sa11x0udc_resources),
.resource = sa11x0udc_resources,
};
static struct resource sa11x0uart1_resources[] = {
[0] = DEFINE_RES_MEM(__PREG(Ser1UTCR0), SZ_64K),
[1] = DEFINE_RES_IRQ(IRQ_Ser1UART),
};
static struct platform_device sa11x0uart1_device = {
.name = "sa11x0-uart",
.id = 1,
.num_resources = ARRAY_SIZE(sa11x0uart1_resources),
.resource = sa11x0uart1_resources,
};
static struct resource sa11x0uart3_resources[] = {
[0] = DEFINE_RES_MEM(__PREG(Ser3UTCR0), SZ_64K),
[1] = DEFINE_RES_IRQ(IRQ_Ser3UART),
};
static struct platform_device sa11x0uart3_device = {
.name = "sa11x0-uart",
.id = 3,
.num_resources = ARRAY_SIZE(sa11x0uart3_resources),
.resource = sa11x0uart3_resources,
};
static struct resource sa11x0mcp_resources[] = {
[0] = DEFINE_RES_MEM(__PREG(Ser4MCCR0), SZ_64K),
[1] = DEFINE_RES_MEM(__PREG(Ser4MCCR1), 4),
[2] = DEFINE_RES_IRQ(IRQ_Ser4MCP),
};
static u64 sa11x0mcp_dma_mask = 0xffffffffUL;
static struct platform_device sa11x0mcp_device = {
.name = "sa11x0-mcp",
.id = -1,
.dev = {
.dma_mask = &sa11x0mcp_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(sa11x0mcp_resources),
.resource = sa11x0mcp_resources,
};
void __init sa11x0_ppc_configure_mcp(void)
{
/* Setup the PPC unit for the MCP */
PPDR &= ~PPC_RXD4;
PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
PSDR |= PPC_RXD4;
PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
}
void sa11x0_register_mcp(struct mcp_plat_data *data)
{
sa11x0_register_device(&sa11x0mcp_device, data);
}
static struct resource sa11x0ssp_resources[] = {
[0] = DEFINE_RES_MEM(0x80070000, SZ_64K),
[1] = DEFINE_RES_IRQ(IRQ_Ser4SSP),
};
static u64 sa11x0ssp_dma_mask = 0xffffffffUL;
static struct platform_device sa11x0ssp_device = {
.name = "sa11x0-ssp",
.id = -1,
.dev = {
.dma_mask = &sa11x0ssp_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(sa11x0ssp_resources),
.resource = sa11x0ssp_resources,
};
static struct resource sa11x0fb_resources[] = {
[0] = DEFINE_RES_MEM(0xb0100000, SZ_64K),
[1] = DEFINE_RES_IRQ(IRQ_LCD),
};
static struct platform_device sa11x0fb_device = {
.name = "sa11x0-fb",
.id = -1,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(sa11x0fb_resources),
.resource = sa11x0fb_resources,
};
void sa11x0_register_lcd(struct sa1100fb_mach_info *inf)
{
sa11x0_register_device(&sa11x0fb_device, inf);
}
static struct platform_device sa11x0pcmcia_device = {
.name = "sa11x0-pcmcia",
.id = -1,
};
static struct platform_device sa11x0mtd_device = {
.name = "sa1100-mtd",
.id = -1,
};
void sa11x0_register_mtd(struct flash_platform_data *flash,
struct resource *res, int nr)
{
flash->name = "sa1100";
sa11x0mtd_device.resource = res;
sa11x0mtd_device.num_resources = nr;
sa11x0_register_device(&sa11x0mtd_device, flash);
}
static struct resource sa11x0ir_resources[] = {
DEFINE_RES_MEM(__PREG(Ser2UTCR0), 0x24),
DEFINE_RES_MEM(__PREG(Ser2HSCR0), 0x1c),
DEFINE_RES_MEM(__PREG(Ser2HSCR2), 0x04),
DEFINE_RES_IRQ(IRQ_Ser2ICP),
};
static struct platform_device sa11x0ir_device = {
.name = "sa11x0-ir",
.id = -1,
.num_resources = ARRAY_SIZE(sa11x0ir_resources),
.resource = sa11x0ir_resources,
};
void sa11x0_register_irda(struct irda_platform_data *irda)
{
sa11x0_register_device(&sa11x0ir_device, irda);
}
static struct resource sa1100_rtc_resources[] = {
DEFINE_RES_MEM(0x90010000, 0x40),
DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
};
static struct platform_device sa11x0rtc_device = {
.name = "sa1100-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(sa1100_rtc_resources),
.resource = sa1100_rtc_resources,
};
static struct resource sa11x0dma_resources[] = {
DEFINE_RES_MEM(DMA_PHYS, DMA_SIZE),
DEFINE_RES_IRQ(IRQ_DMA0),
DEFINE_RES_IRQ(IRQ_DMA1),
DEFINE_RES_IRQ(IRQ_DMA2),
DEFINE_RES_IRQ(IRQ_DMA3),
DEFINE_RES_IRQ(IRQ_DMA4),
DEFINE_RES_IRQ(IRQ_DMA5),
};
static u64 sa11x0dma_dma_mask = DMA_BIT_MASK(32);
static struct platform_device sa11x0dma_device = {
.name = "sa11x0-dma",
.id = -1,
.dev = {
.dma_mask = &sa11x0dma_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(sa11x0dma_resources),
.resource = sa11x0dma_resources,
};
static struct platform_device *sa11x0_devices[] __initdata = {
&sa11x0udc_device,
&sa11x0uart1_device,
&sa11x0uart3_device,
&sa11x0ssp_device,
&sa11x0pcmcia_device,
&sa11x0rtc_device,
&sa11x0dma_device,
};
static int __init sa1100_init(void)
{
pm_power_off = sa1100_power_off;
return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
}
arch_initcall(sa1100_init);
void __init sa11x0_init_late(void)
{
sa11x0_pm_init();
}
/*
* Common I/O mapping:
*
* Typically, static virtual address mappings are as follow:
*
* 0xf0000000-0xf3ffffff: miscellaneous stuff (CPLDs, etc.)
* 0xf4000000-0xf4ffffff: SA-1111
* 0xf5000000-0xf5ffffff: reserved (used by cache flushing area)
* 0xf6000000-0xfffeffff: reserved (internal SA1100 IO defined above)
* 0xffff0000-0xffff0fff: SA1100 exception vectors
* 0xffff2000-0xffff2fff: Minicache copy_user_page area
*
* Below 0xe8000000 is reserved for vm allocation.
*
* The machine specific code must provide the extra mapping beside the
* default mapping provided here.
*/
static struct map_desc standard_io_desc[] __initdata = {
{ /* PCM */
.virtual = 0xf8000000,
.pfn = __phys_to_pfn(0x80000000),
.length = 0x00100000,
.type = MT_DEVICE
}, { /* SCM */
.virtual = 0xfa000000,
.pfn = __phys_to_pfn(0x90000000),
.length = 0x00100000,
.type = MT_DEVICE
}, { /* MER */
.virtual = 0xfc000000,
.pfn = __phys_to_pfn(0xa0000000),
.length = 0x00100000,
.type = MT_DEVICE
}, { /* LCD + DMA */
.virtual = 0xfe000000,
.pfn = __phys_to_pfn(0xb0000000),
.length = 0x00200000,
.type = MT_DEVICE
},
};
void __init sa1100_map_io(void)
{
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
}
/*
* Disable the memory bus request/grant signals on the SA1110 to
* ensure that we don't receive spurious memory requests. We set
* the MBGNT signal false to ensure the SA1111 doesn't own the
* SDRAM bus.
*/
void sa1110_mb_disable(void)
{
unsigned long flags;
local_irq_save(flags);
PGSR &= ~GPIO_MBGNT;
GPCR = GPIO_MBGNT;
GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
GAFR &= ~(GPIO_MBGNT | GPIO_MBREQ);
local_irq_restore(flags);
}
/*
* If the system is going to use the SA-1111 DMA engines, set up
* the memory bus request/grant pins.
*/
void sa1110_mb_enable(void)
{
unsigned long flags;
local_irq_save(flags);
PGSR &= ~GPIO_MBGNT;
GPCR = GPIO_MBGNT;
GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
GAFR |= (GPIO_MBGNT | GPIO_MBREQ);
TUCR |= TUCR_MR;
local_irq_restore(flags);
}
View git blame Copy permalink