![Greg Ungerer](/assets/img/avatar_default.png)
Add support for the net stats64 counters to the usbnet core. With that in place put the hooks into every usbnet driver to use it. This is a strait forward addition of 64bit counters for RX and TX packet and byte counts. It is done in the same style as for the other net drivers that support stats64. Note that the other stats fields remain as 32bit sized values (error counts, etc). The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
388 lines
9.9 KiB
C
388 lines
9.9 KiB
C
/*
|
|
* ASIX AX88172A based USB 2.0 Ethernet Devices
|
|
* Copyright (C) 2012 OMICRON electronics GmbH
|
|
*
|
|
* Supports external PHYs via phylib. Based on the driver for the
|
|
* AX88772. Original copyrights follow:
|
|
*
|
|
* Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
|
|
* Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
|
|
* Copyright (C) 2006 James Painter <jamie.painter@iname.com>
|
|
* Copyright (c) 2002-2003 TiVo Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "asix.h"
|
|
#include <linux/phy.h>
|
|
|
|
struct ax88172a_private {
|
|
struct mii_bus *mdio;
|
|
struct phy_device *phydev;
|
|
char phy_name[20];
|
|
u16 phy_addr;
|
|
u16 oldmode;
|
|
int use_embdphy;
|
|
struct asix_rx_fixup_info rx_fixup_info;
|
|
};
|
|
|
|
/* MDIO read and write wrappers for phylib */
|
|
static int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
|
|
{
|
|
return asix_mdio_read(((struct usbnet *)bus->priv)->net, phy_id,
|
|
regnum);
|
|
}
|
|
|
|
static int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum,
|
|
u16 val)
|
|
{
|
|
asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val);
|
|
return 0;
|
|
}
|
|
|
|
static int ax88172a_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
|
|
{
|
|
if (!netif_running(net))
|
|
return -EINVAL;
|
|
|
|
if (!net->phydev)
|
|
return -ENODEV;
|
|
|
|
return phy_mii_ioctl(net->phydev, rq, cmd);
|
|
}
|
|
|
|
/* set MAC link settings according to information from phylib */
|
|
static void ax88172a_adjust_link(struct net_device *netdev)
|
|
{
|
|
struct phy_device *phydev = netdev->phydev;
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
struct ax88172a_private *priv = dev->driver_priv;
|
|
u16 mode = 0;
|
|
|
|
if (phydev->link) {
|
|
mode = AX88772_MEDIUM_DEFAULT;
|
|
|
|
if (phydev->duplex == DUPLEX_HALF)
|
|
mode &= ~AX_MEDIUM_FD;
|
|
|
|
if (phydev->speed != SPEED_100)
|
|
mode &= ~AX_MEDIUM_PS;
|
|
}
|
|
|
|
if (mode != priv->oldmode) {
|
|
asix_write_medium_mode(dev, mode, 0);
|
|
priv->oldmode = mode;
|
|
netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
|
|
phydev->speed, phydev->duplex, mode);
|
|
phy_print_status(phydev);
|
|
}
|
|
}
|
|
|
|
static void ax88172a_status(struct usbnet *dev, struct urb *urb)
|
|
{
|
|
/* link changes are detected by polling the phy */
|
|
}
|
|
|
|
/* use phylib infrastructure */
|
|
static int ax88172a_init_mdio(struct usbnet *dev)
|
|
{
|
|
struct ax88172a_private *priv = dev->driver_priv;
|
|
int ret;
|
|
|
|
priv->mdio = mdiobus_alloc();
|
|
if (!priv->mdio) {
|
|
netdev_err(dev->net, "Could not allocate MDIO bus\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
priv->mdio->priv = (void *)dev;
|
|
priv->mdio->read = &asix_mdio_bus_read;
|
|
priv->mdio->write = &asix_mdio_bus_write;
|
|
priv->mdio->name = "Asix MDIO Bus";
|
|
/* mii bus name is usb-<usb bus number>-<usb device number> */
|
|
snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
|
|
dev->udev->bus->busnum, dev->udev->devnum);
|
|
|
|
ret = mdiobus_register(priv->mdio);
|
|
if (ret) {
|
|
netdev_err(dev->net, "Could not register MDIO bus\n");
|
|
goto mfree;
|
|
}
|
|
|
|
netdev_info(dev->net, "registered mdio bus %s\n", priv->mdio->id);
|
|
return 0;
|
|
|
|
mfree:
|
|
mdiobus_free(priv->mdio);
|
|
return ret;
|
|
}
|
|
|
|
static void ax88172a_remove_mdio(struct usbnet *dev)
|
|
{
|
|
struct ax88172a_private *priv = dev->driver_priv;
|
|
|
|
netdev_info(dev->net, "deregistering mdio bus %s\n", priv->mdio->id);
|
|
mdiobus_unregister(priv->mdio);
|
|
mdiobus_free(priv->mdio);
|
|
}
|
|
|
|
static const struct net_device_ops ax88172a_netdev_ops = {
|
|
.ndo_open = usbnet_open,
|
|
.ndo_stop = usbnet_stop,
|
|
.ndo_start_xmit = usbnet_start_xmit,
|
|
.ndo_tx_timeout = usbnet_tx_timeout,
|
|
.ndo_change_mtu = usbnet_change_mtu,
|
|
.ndo_get_stats64 = usbnet_get_stats64,
|
|
.ndo_set_mac_address = asix_set_mac_address,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_do_ioctl = ax88172a_ioctl,
|
|
.ndo_set_rx_mode = asix_set_multicast,
|
|
};
|
|
|
|
static const struct ethtool_ops ax88172a_ethtool_ops = {
|
|
.get_drvinfo = asix_get_drvinfo,
|
|
.get_link = usbnet_get_link,
|
|
.get_msglevel = usbnet_get_msglevel,
|
|
.set_msglevel = usbnet_set_msglevel,
|
|
.get_wol = asix_get_wol,
|
|
.set_wol = asix_set_wol,
|
|
.get_eeprom_len = asix_get_eeprom_len,
|
|
.get_eeprom = asix_get_eeprom,
|
|
.set_eeprom = asix_set_eeprom,
|
|
.nway_reset = phy_ethtool_nway_reset,
|
|
.get_link_ksettings = phy_ethtool_get_link_ksettings,
|
|
.set_link_ksettings = phy_ethtool_set_link_ksettings,
|
|
};
|
|
|
|
static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy)
|
|
{
|
|
int ret;
|
|
|
|
ret = asix_sw_reset(dev, AX_SWRESET_IPPD, 0);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
msleep(150);
|
|
ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, 0);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
msleep(150);
|
|
|
|
ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD,
|
|
0);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
|
|
{
|
|
int ret;
|
|
u8 buf[ETH_ALEN];
|
|
struct ax88172a_private *priv;
|
|
|
|
usbnet_get_endpoints(dev, intf);
|
|
|
|
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
dev->driver_priv = priv;
|
|
|
|
/* Get the MAC address */
|
|
ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
|
|
if (ret < 0) {
|
|
netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
|
|
goto free;
|
|
}
|
|
memcpy(dev->net->dev_addr, buf, ETH_ALEN);
|
|
|
|
dev->net->netdev_ops = &ax88172a_netdev_ops;
|
|
dev->net->ethtool_ops = &ax88172a_ethtool_ops;
|
|
|
|
/* are we using the internal or the external phy? */
|
|
ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf, 0);
|
|
if (ret < 0) {
|
|
netdev_err(dev->net, "Failed to read software interface selection register: %d\n",
|
|
ret);
|
|
goto free;
|
|
}
|
|
|
|
netdev_dbg(dev->net, "AX_CMD_SW_PHY_STATUS = 0x%02x\n", buf[0]);
|
|
switch (buf[0] & AX_PHY_SELECT_MASK) {
|
|
case AX_PHY_SELECT_INTERNAL:
|
|
netdev_dbg(dev->net, "use internal phy\n");
|
|
priv->use_embdphy = 1;
|
|
break;
|
|
case AX_PHY_SELECT_EXTERNAL:
|
|
netdev_dbg(dev->net, "use external phy\n");
|
|
priv->use_embdphy = 0;
|
|
break;
|
|
default:
|
|
netdev_err(dev->net, "Interface mode not supported by driver\n");
|
|
ret = -ENOTSUPP;
|
|
goto free;
|
|
}
|
|
|
|
priv->phy_addr = asix_read_phy_addr(dev, priv->use_embdphy);
|
|
ax88172a_reset_phy(dev, priv->use_embdphy);
|
|
|
|
/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
|
|
if (dev->driver_info->flags & FLAG_FRAMING_AX) {
|
|
/* hard_mtu is still the default - the device does not support
|
|
jumbo eth frames */
|
|
dev->rx_urb_size = 2048;
|
|
}
|
|
|
|
/* init MDIO bus */
|
|
ret = ax88172a_init_mdio(dev);
|
|
if (ret)
|
|
goto free;
|
|
|
|
return 0;
|
|
|
|
free:
|
|
kfree(priv);
|
|
return ret;
|
|
}
|
|
|
|
static int ax88172a_stop(struct usbnet *dev)
|
|
{
|
|
struct ax88172a_private *priv = dev->driver_priv;
|
|
|
|
netdev_dbg(dev->net, "Stopping interface\n");
|
|
|
|
if (priv->phydev) {
|
|
netdev_info(dev->net, "Disconnecting from phy %s\n",
|
|
priv->phy_name);
|
|
phy_stop(priv->phydev);
|
|
phy_disconnect(priv->phydev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ax88172a_unbind(struct usbnet *dev, struct usb_interface *intf)
|
|
{
|
|
struct ax88172a_private *priv = dev->driver_priv;
|
|
|
|
ax88172a_remove_mdio(dev);
|
|
kfree(priv);
|
|
}
|
|
|
|
static int ax88172a_reset(struct usbnet *dev)
|
|
{
|
|
struct asix_data *data = (struct asix_data *)&dev->data;
|
|
struct ax88172a_private *priv = dev->driver_priv;
|
|
int ret;
|
|
u16 rx_ctl;
|
|
|
|
ax88172a_reset_phy(dev, priv->use_embdphy);
|
|
|
|
msleep(150);
|
|
rx_ctl = asix_read_rx_ctl(dev, 0);
|
|
netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
|
|
ret = asix_write_rx_ctl(dev, 0x0000, 0);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
rx_ctl = asix_read_rx_ctl(dev, 0);
|
|
netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
|
|
|
|
msleep(150);
|
|
|
|
ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
|
|
AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
|
|
AX88772_IPG2_DEFAULT, 0, NULL, 0);
|
|
if (ret < 0) {
|
|
netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
/* Rewrite MAC address */
|
|
memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
|
|
ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
|
|
data->mac_addr, 0);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* Set RX_CTL to default values with 2k buffer, and enable cactus */
|
|
ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
rx_ctl = asix_read_rx_ctl(dev, 0);
|
|
netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
|
|
rx_ctl);
|
|
|
|
rx_ctl = asix_read_medium_status(dev, 0);
|
|
netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n",
|
|
rx_ctl);
|
|
|
|
/* Connect to PHY */
|
|
snprintf(priv->phy_name, 20, PHY_ID_FMT,
|
|
priv->mdio->id, priv->phy_addr);
|
|
|
|
priv->phydev = phy_connect(dev->net, priv->phy_name,
|
|
&ax88172a_adjust_link,
|
|
PHY_INTERFACE_MODE_MII);
|
|
if (IS_ERR(priv->phydev)) {
|
|
netdev_err(dev->net, "Could not connect to PHY device %s\n",
|
|
priv->phy_name);
|
|
ret = PTR_ERR(priv->phydev);
|
|
goto out;
|
|
}
|
|
|
|
netdev_info(dev->net, "Connected to phy %s\n", priv->phy_name);
|
|
|
|
/* During power-up, the AX88172A set the power down (BMCR_PDOWN)
|
|
* bit of the PHY. Bring the PHY up again.
|
|
*/
|
|
genphy_resume(priv->phydev);
|
|
phy_start(priv->phydev);
|
|
|
|
return 0;
|
|
|
|
out:
|
|
return ret;
|
|
|
|
}
|
|
|
|
static int ax88172a_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
|
|
{
|
|
struct ax88172a_private *dp = dev->driver_priv;
|
|
struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
|
|
|
|
return asix_rx_fixup_internal(dev, skb, rx);
|
|
}
|
|
|
|
const struct driver_info ax88172a_info = {
|
|
.description = "ASIX AX88172A USB 2.0 Ethernet",
|
|
.bind = ax88172a_bind,
|
|
.reset = ax88172a_reset,
|
|
.stop = ax88172a_stop,
|
|
.unbind = ax88172a_unbind,
|
|
.status = ax88172a_status,
|
|
.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
|
|
FLAG_MULTI_PACKET,
|
|
.rx_fixup = ax88172a_rx_fixup,
|
|
.tx_fixup = asix_tx_fixup,
|
|
};
|