![Greg Ungerer](/assets/img/avatar_default.png)
Add support for the net stats64 counters to the usbnet core. With that in place put the hooks into every usbnet driver to use it. This is a strait forward addition of 64bit counters for RX and TX packet and byte counts. It is done in the same style as for the other net drivers that support stats64. Note that the other stats fields remain as 32bit sized values (error counts, etc). The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
644 lines
17 KiB
C
644 lines
17 KiB
C
/*
|
|
* MOSCHIP MCS7830 based (7730/7830/7832) USB 2.0 Ethernet Devices
|
|
*
|
|
* based on usbnet.c, asix.c and the vendor provided mcs7830 driver
|
|
*
|
|
* Copyright (C) 2010 Andreas Mohr <andi@lisas.de>
|
|
* Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>
|
|
* Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
|
|
* Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
|
|
* Copyright (c) 2002-2003 TiVo Inc.
|
|
*
|
|
* Definitions gathered from MOSCHIP, Data Sheet_7830DA.pdf (thanks!).
|
|
*
|
|
* 2010-12-19: add 7832 USB PID ("functionality same as MCS7830"),
|
|
* per active notification by manufacturer
|
|
*
|
|
* TODO:
|
|
* - support HIF_REG_CONFIG_SLEEPMODE/HIF_REG_CONFIG_TXENABLE (via autopm?)
|
|
* - implement ethtool_ops get_pauseparam/set_pauseparam
|
|
* via HIF_REG_PAUSE_THRESHOLD (>= revision C only!)
|
|
* - implement get_eeprom/[set_eeprom]
|
|
* - switch PHY on/off on ifup/ifdown (perhaps in usbnet.c, via MII)
|
|
* - mcs7830_get_regs() handling is weird: for rev 2 we return 32 regs,
|
|
* can access only ~ 24, remaining user buffer is uninitialized garbage
|
|
* - anything else?
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/crc32.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/usbnet.h>
|
|
|
|
/* requests */
|
|
#define MCS7830_RD_BMREQ (USB_DIR_IN | USB_TYPE_VENDOR | \
|
|
USB_RECIP_DEVICE)
|
|
#define MCS7830_WR_BMREQ (USB_DIR_OUT | USB_TYPE_VENDOR | \
|
|
USB_RECIP_DEVICE)
|
|
#define MCS7830_RD_BREQ 0x0E
|
|
#define MCS7830_WR_BREQ 0x0D
|
|
|
|
#define MCS7830_CTRL_TIMEOUT 1000
|
|
#define MCS7830_MAX_MCAST 64
|
|
|
|
#define MCS7830_VENDOR_ID 0x9710
|
|
#define MCS7832_PRODUCT_ID 0x7832
|
|
#define MCS7830_PRODUCT_ID 0x7830
|
|
#define MCS7730_PRODUCT_ID 0x7730
|
|
|
|
#define SITECOM_VENDOR_ID 0x0DF6
|
|
#define LN_030_PRODUCT_ID 0x0021
|
|
|
|
#define MCS7830_MII_ADVERTISE (ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \
|
|
ADVERTISE_100HALF | ADVERTISE_10FULL | \
|
|
ADVERTISE_10HALF | ADVERTISE_CSMA)
|
|
|
|
/* HIF_REG_XX corresponding index value */
|
|
enum {
|
|
HIF_REG_MULTICAST_HASH = 0x00,
|
|
HIF_REG_PACKET_GAP1 = 0x08,
|
|
HIF_REG_PACKET_GAP2 = 0x09,
|
|
HIF_REG_PHY_DATA = 0x0a,
|
|
HIF_REG_PHY_CMD1 = 0x0c,
|
|
HIF_REG_PHY_CMD1_READ = 0x40,
|
|
HIF_REG_PHY_CMD1_WRITE = 0x20,
|
|
HIF_REG_PHY_CMD1_PHYADDR = 0x01,
|
|
HIF_REG_PHY_CMD2 = 0x0d,
|
|
HIF_REG_PHY_CMD2_PEND_FLAG_BIT = 0x80,
|
|
HIF_REG_PHY_CMD2_READY_FLAG_BIT = 0x40,
|
|
HIF_REG_CONFIG = 0x0e,
|
|
/* hmm, spec sez: "R/W", "Except bit 3" (likely TXENABLE). */
|
|
HIF_REG_CONFIG_CFG = 0x80,
|
|
HIF_REG_CONFIG_SPEED100 = 0x40,
|
|
HIF_REG_CONFIG_FULLDUPLEX_ENABLE = 0x20,
|
|
HIF_REG_CONFIG_RXENABLE = 0x10,
|
|
HIF_REG_CONFIG_TXENABLE = 0x08,
|
|
HIF_REG_CONFIG_SLEEPMODE = 0x04,
|
|
HIF_REG_CONFIG_ALLMULTICAST = 0x02,
|
|
HIF_REG_CONFIG_PROMISCUOUS = 0x01,
|
|
HIF_REG_ETHERNET_ADDR = 0x0f,
|
|
HIF_REG_FRAME_DROP_COUNTER = 0x15, /* 0..ff; reset: 0 */
|
|
HIF_REG_PAUSE_THRESHOLD = 0x16,
|
|
HIF_REG_PAUSE_THRESHOLD_DEFAULT = 0,
|
|
};
|
|
|
|
/* Trailing status byte in Ethernet Rx frame */
|
|
enum {
|
|
MCS7830_RX_SHORT_FRAME = 0x01, /* < 64 bytes */
|
|
MCS7830_RX_LENGTH_ERROR = 0x02, /* framelen != Ethernet length field */
|
|
MCS7830_RX_ALIGNMENT_ERROR = 0x04, /* non-even number of nibbles */
|
|
MCS7830_RX_CRC_ERROR = 0x08,
|
|
MCS7830_RX_LARGE_FRAME = 0x10, /* > 1518 bytes */
|
|
MCS7830_RX_FRAME_CORRECT = 0x20, /* frame is correct */
|
|
/* [7:6] reserved */
|
|
};
|
|
|
|
struct mcs7830_data {
|
|
u8 multi_filter[8];
|
|
u8 config;
|
|
};
|
|
|
|
static const char driver_name[] = "MOSCHIP usb-ethernet driver";
|
|
|
|
static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
|
|
{
|
|
return usbnet_read_cmd(dev, MCS7830_RD_BREQ, MCS7830_RD_BMREQ,
|
|
0x0000, index, data, size);
|
|
}
|
|
|
|
static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, const void *data)
|
|
{
|
|
return usbnet_write_cmd(dev, MCS7830_WR_BREQ, MCS7830_WR_BMREQ,
|
|
0x0000, index, data, size);
|
|
}
|
|
|
|
static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void *data)
|
|
{
|
|
usbnet_write_cmd_async(dev, MCS7830_WR_BREQ, MCS7830_WR_BMREQ,
|
|
0x0000, index, data, size);
|
|
}
|
|
|
|
static int mcs7830_hif_get_mac_address(struct usbnet *dev, unsigned char *addr)
|
|
{
|
|
int ret = mcs7830_get_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
|
|
if (ret < 0)
|
|
return ret;
|
|
return 0;
|
|
}
|
|
|
|
static int mcs7830_hif_set_mac_address(struct usbnet *dev, unsigned char *addr)
|
|
{
|
|
int ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
return 0;
|
|
}
|
|
|
|
static int mcs7830_set_mac_address(struct net_device *netdev, void *p)
|
|
{
|
|
int ret;
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
struct sockaddr *addr = p;
|
|
|
|
if (netif_running(netdev))
|
|
return -EBUSY;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
ret = mcs7830_hif_set_mac_address(dev, addr->sa_data);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* it worked --> adopt it on netdev side */
|
|
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcs7830_read_phy(struct usbnet *dev, u8 index)
|
|
{
|
|
int ret;
|
|
int i;
|
|
__le16 val;
|
|
|
|
u8 cmd[2] = {
|
|
HIF_REG_PHY_CMD1_READ | HIF_REG_PHY_CMD1_PHYADDR,
|
|
HIF_REG_PHY_CMD2_PEND_FLAG_BIT | index,
|
|
};
|
|
|
|
mutex_lock(&dev->phy_mutex);
|
|
/* write the MII command */
|
|
ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* wait for the data to become valid, should be within < 1ms */
|
|
for (i = 0; i < 10; i++) {
|
|
ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
|
|
if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
|
|
break;
|
|
ret = -EIO;
|
|
msleep(1);
|
|
}
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* read actual register contents */
|
|
ret = mcs7830_get_reg(dev, HIF_REG_PHY_DATA, 2, &val);
|
|
if (ret < 0)
|
|
goto out;
|
|
ret = le16_to_cpu(val);
|
|
dev_dbg(&dev->udev->dev, "read PHY reg %02x: %04x (%d tries)\n",
|
|
index, val, i);
|
|
out:
|
|
mutex_unlock(&dev->phy_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int mcs7830_write_phy(struct usbnet *dev, u8 index, u16 val)
|
|
{
|
|
int ret;
|
|
int i;
|
|
__le16 le_val;
|
|
|
|
u8 cmd[2] = {
|
|
HIF_REG_PHY_CMD1_WRITE | HIF_REG_PHY_CMD1_PHYADDR,
|
|
HIF_REG_PHY_CMD2_PEND_FLAG_BIT | (index & 0x1F),
|
|
};
|
|
|
|
mutex_lock(&dev->phy_mutex);
|
|
|
|
/* write the new register contents */
|
|
le_val = cpu_to_le16(val);
|
|
ret = mcs7830_set_reg(dev, HIF_REG_PHY_DATA, 2, &le_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* write the MII command */
|
|
ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/* wait for the command to be accepted by the PHY */
|
|
for (i = 0; i < 10; i++) {
|
|
ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
|
|
if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
|
|
break;
|
|
ret = -EIO;
|
|
msleep(1);
|
|
}
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = 0;
|
|
dev_dbg(&dev->udev->dev, "write PHY reg %02x: %04x (%d tries)\n",
|
|
index, val, i);
|
|
out:
|
|
mutex_unlock(&dev->phy_mutex);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This algorithm comes from the original mcs7830 version 1.4 driver,
|
|
* not sure if it is needed.
|
|
*/
|
|
static int mcs7830_set_autoneg(struct usbnet *dev, int ptrUserPhyMode)
|
|
{
|
|
int ret;
|
|
/* Enable all media types */
|
|
ret = mcs7830_write_phy(dev, MII_ADVERTISE, MCS7830_MII_ADVERTISE);
|
|
|
|
/* First reset BMCR */
|
|
if (!ret)
|
|
ret = mcs7830_write_phy(dev, MII_BMCR, 0x0000);
|
|
/* Enable Auto Neg */
|
|
if (!ret)
|
|
ret = mcs7830_write_phy(dev, MII_BMCR, BMCR_ANENABLE);
|
|
/* Restart Auto Neg (Keep the Enable Auto Neg Bit Set) */
|
|
if (!ret)
|
|
ret = mcs7830_write_phy(dev, MII_BMCR,
|
|
BMCR_ANENABLE | BMCR_ANRESTART );
|
|
return ret;
|
|
}
|
|
|
|
|
|
/*
|
|
* if we can read register 22, the chip revision is C or higher
|
|
*/
|
|
static int mcs7830_get_rev(struct usbnet *dev)
|
|
{
|
|
u8 dummy[2];
|
|
int ret;
|
|
ret = mcs7830_get_reg(dev, HIF_REG_FRAME_DROP_COUNTER, 2, dummy);
|
|
if (ret > 0)
|
|
return 2; /* Rev C or later */
|
|
return 1; /* earlier revision */
|
|
}
|
|
|
|
/*
|
|
* On rev. C we need to set the pause threshold
|
|
*/
|
|
static void mcs7830_rev_C_fixup(struct usbnet *dev)
|
|
{
|
|
u8 pause_threshold = HIF_REG_PAUSE_THRESHOLD_DEFAULT;
|
|
int retry;
|
|
|
|
for (retry = 0; retry < 2; retry++) {
|
|
if (mcs7830_get_rev(dev) == 2) {
|
|
dev_info(&dev->udev->dev, "applying rev.C fixup\n");
|
|
mcs7830_set_reg(dev, HIF_REG_PAUSE_THRESHOLD,
|
|
1, &pause_threshold);
|
|
}
|
|
msleep(1);
|
|
}
|
|
}
|
|
|
|
static int mcs7830_mdio_read(struct net_device *netdev, int phy_id,
|
|
int location)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
return mcs7830_read_phy(dev, location);
|
|
}
|
|
|
|
static void mcs7830_mdio_write(struct net_device *netdev, int phy_id,
|
|
int location, int val)
|
|
{
|
|
struct usbnet *dev = netdev_priv(netdev);
|
|
mcs7830_write_phy(dev, location, val);
|
|
}
|
|
|
|
static int mcs7830_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
|
|
}
|
|
|
|
static inline struct mcs7830_data *mcs7830_get_data(struct usbnet *dev)
|
|
{
|
|
return (struct mcs7830_data *)&dev->data;
|
|
}
|
|
|
|
static void mcs7830_hif_update_multicast_hash(struct usbnet *dev)
|
|
{
|
|
struct mcs7830_data *data = mcs7830_get_data(dev);
|
|
mcs7830_set_reg_async(dev, HIF_REG_MULTICAST_HASH,
|
|
sizeof data->multi_filter,
|
|
data->multi_filter);
|
|
}
|
|
|
|
static void mcs7830_hif_update_config(struct usbnet *dev)
|
|
{
|
|
/* implementation specific to data->config
|
|
(argument needs to be heap-based anyway - USB DMA!) */
|
|
struct mcs7830_data *data = mcs7830_get_data(dev);
|
|
mcs7830_set_reg_async(dev, HIF_REG_CONFIG, 1, &data->config);
|
|
}
|
|
|
|
static void mcs7830_data_set_multicast(struct net_device *net)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
struct mcs7830_data *data = mcs7830_get_data(dev);
|
|
|
|
memset(data->multi_filter, 0, sizeof data->multi_filter);
|
|
|
|
data->config = HIF_REG_CONFIG_TXENABLE;
|
|
|
|
/* this should not be needed, but it doesn't work otherwise */
|
|
data->config |= HIF_REG_CONFIG_ALLMULTICAST;
|
|
|
|
if (net->flags & IFF_PROMISC) {
|
|
data->config |= HIF_REG_CONFIG_PROMISCUOUS;
|
|
} else if (net->flags & IFF_ALLMULTI ||
|
|
netdev_mc_count(net) > MCS7830_MAX_MCAST) {
|
|
data->config |= HIF_REG_CONFIG_ALLMULTICAST;
|
|
} else if (netdev_mc_empty(net)) {
|
|
/* just broadcast and directed */
|
|
} else {
|
|
/* We use the 20 byte dev->data
|
|
* for our 8 byte filter buffer
|
|
* to avoid allocating memory that
|
|
* is tricky to free later */
|
|
struct netdev_hw_addr *ha;
|
|
u32 crc_bits;
|
|
|
|
/* Build the multicast hash filter. */
|
|
netdev_for_each_mc_addr(ha, net) {
|
|
crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
|
|
data->multi_filter[crc_bits >> 3] |= 1 << (crc_bits & 7);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int mcs7830_apply_base_config(struct usbnet *dev)
|
|
{
|
|
int ret;
|
|
|
|
/* re-configure known MAC (suspend case etc.) */
|
|
ret = mcs7830_hif_set_mac_address(dev, dev->net->dev_addr);
|
|
if (ret) {
|
|
dev_info(&dev->udev->dev, "Cannot set MAC address\n");
|
|
goto out;
|
|
}
|
|
|
|
/* Set up PHY */
|
|
ret = mcs7830_set_autoneg(dev, 0);
|
|
if (ret) {
|
|
dev_info(&dev->udev->dev, "Cannot set autoneg\n");
|
|
goto out;
|
|
}
|
|
|
|
mcs7830_hif_update_multicast_hash(dev);
|
|
mcs7830_hif_update_config(dev);
|
|
|
|
mcs7830_rev_C_fixup(dev);
|
|
ret = 0;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/* credits go to asix_set_multicast */
|
|
static void mcs7830_set_multicast(struct net_device *net)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
|
|
mcs7830_data_set_multicast(net);
|
|
|
|
mcs7830_hif_update_multicast_hash(dev);
|
|
mcs7830_hif_update_config(dev);
|
|
}
|
|
|
|
static int mcs7830_get_regs_len(struct net_device *net)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
|
|
switch (mcs7830_get_rev(dev)) {
|
|
case 1:
|
|
return 21;
|
|
case 2:
|
|
return 32;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void mcs7830_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *drvinfo)
|
|
{
|
|
usbnet_get_drvinfo(net, drvinfo);
|
|
}
|
|
|
|
static void mcs7830_get_regs(struct net_device *net, struct ethtool_regs *regs, void *data)
|
|
{
|
|
struct usbnet *dev = netdev_priv(net);
|
|
|
|
regs->version = mcs7830_get_rev(dev);
|
|
mcs7830_get_reg(dev, 0, regs->len, data);
|
|
}
|
|
|
|
static const struct ethtool_ops mcs7830_ethtool_ops = {
|
|
.get_drvinfo = mcs7830_get_drvinfo,
|
|
.get_regs_len = mcs7830_get_regs_len,
|
|
.get_regs = mcs7830_get_regs,
|
|
|
|
/* common usbnet calls */
|
|
.get_link = usbnet_get_link,
|
|
.get_msglevel = usbnet_get_msglevel,
|
|
.set_msglevel = usbnet_set_msglevel,
|
|
.nway_reset = usbnet_nway_reset,
|
|
.get_link_ksettings = usbnet_get_link_ksettings,
|
|
.set_link_ksettings = usbnet_set_link_ksettings,
|
|
};
|
|
|
|
static const struct net_device_ops mcs7830_netdev_ops = {
|
|
.ndo_open = usbnet_open,
|
|
.ndo_stop = usbnet_stop,
|
|
.ndo_start_xmit = usbnet_start_xmit,
|
|
.ndo_tx_timeout = usbnet_tx_timeout,
|
|
.ndo_change_mtu = usbnet_change_mtu,
|
|
.ndo_get_stats64 = usbnet_get_stats64,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_do_ioctl = mcs7830_ioctl,
|
|
.ndo_set_rx_mode = mcs7830_set_multicast,
|
|
.ndo_set_mac_address = mcs7830_set_mac_address,
|
|
};
|
|
|
|
static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
|
|
{
|
|
struct net_device *net = dev->net;
|
|
int ret;
|
|
int retry;
|
|
|
|
/* Initial startup: Gather MAC address setting from EEPROM */
|
|
ret = -EINVAL;
|
|
for (retry = 0; retry < 5 && ret; retry++)
|
|
ret = mcs7830_hif_get_mac_address(dev, net->dev_addr);
|
|
if (ret) {
|
|
dev_warn(&dev->udev->dev, "Cannot read MAC address\n");
|
|
goto out;
|
|
}
|
|
|
|
mcs7830_data_set_multicast(net);
|
|
|
|
ret = mcs7830_apply_base_config(dev);
|
|
if (ret)
|
|
goto out;
|
|
|
|
net->ethtool_ops = &mcs7830_ethtool_ops;
|
|
net->netdev_ops = &mcs7830_netdev_ops;
|
|
|
|
/* reserve space for the status byte on rx */
|
|
dev->rx_urb_size = ETH_FRAME_LEN + 1;
|
|
|
|
dev->mii.mdio_read = mcs7830_mdio_read;
|
|
dev->mii.mdio_write = mcs7830_mdio_write;
|
|
dev->mii.dev = net;
|
|
dev->mii.phy_id_mask = 0x3f;
|
|
dev->mii.reg_num_mask = 0x1f;
|
|
dev->mii.phy_id = *((u8 *) net->dev_addr + 1);
|
|
|
|
ret = usbnet_get_endpoints(dev, udev);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/* The chip always appends a status byte that we need to strip */
|
|
static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
|
|
{
|
|
u8 status;
|
|
|
|
/* This check is no longer done by usbnet */
|
|
if (skb->len < dev->net->hard_header_len) {
|
|
dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
|
|
return 0;
|
|
}
|
|
|
|
skb_trim(skb, skb->len - 1);
|
|
status = skb->data[skb->len];
|
|
|
|
if (status != MCS7830_RX_FRAME_CORRECT) {
|
|
dev_dbg(&dev->udev->dev, "rx fixup status %x\n", status);
|
|
|
|
/* hmm, perhaps usbnet.c already sees a globally visible
|
|
frame error and increments rx_errors on its own already? */
|
|
dev->net->stats.rx_errors++;
|
|
|
|
if (status & (MCS7830_RX_SHORT_FRAME
|
|
|MCS7830_RX_LENGTH_ERROR
|
|
|MCS7830_RX_LARGE_FRAME))
|
|
dev->net->stats.rx_length_errors++;
|
|
if (status & MCS7830_RX_ALIGNMENT_ERROR)
|
|
dev->net->stats.rx_frame_errors++;
|
|
if (status & MCS7830_RX_CRC_ERROR)
|
|
dev->net->stats.rx_crc_errors++;
|
|
}
|
|
|
|
return skb->len > 0;
|
|
}
|
|
|
|
static void mcs7830_status(struct usbnet *dev, struct urb *urb)
|
|
{
|
|
u8 *buf = urb->transfer_buffer;
|
|
bool link, link_changed;
|
|
|
|
if (urb->actual_length < 16)
|
|
return;
|
|
|
|
link = !(buf[1] == 0x20);
|
|
link_changed = netif_carrier_ok(dev->net) != link;
|
|
if (link_changed) {
|
|
usbnet_link_change(dev, link, 0);
|
|
netdev_dbg(dev->net, "Link Status is: %d\n", link);
|
|
}
|
|
}
|
|
|
|
static const struct driver_info moschip_info = {
|
|
.description = "MOSCHIP 7830/7832/7730 usb-NET adapter",
|
|
.bind = mcs7830_bind,
|
|
.rx_fixup = mcs7830_rx_fixup,
|
|
.flags = FLAG_ETHER | FLAG_LINK_INTR,
|
|
.status = mcs7830_status,
|
|
.in = 1,
|
|
.out = 2,
|
|
};
|
|
|
|
static const struct driver_info sitecom_info = {
|
|
.description = "Sitecom LN-30 usb-NET adapter",
|
|
.bind = mcs7830_bind,
|
|
.rx_fixup = mcs7830_rx_fixup,
|
|
.flags = FLAG_ETHER | FLAG_LINK_INTR,
|
|
.status = mcs7830_status,
|
|
.in = 1,
|
|
.out = 2,
|
|
};
|
|
|
|
static const struct usb_device_id products[] = {
|
|
{
|
|
USB_DEVICE(MCS7830_VENDOR_ID, MCS7832_PRODUCT_ID),
|
|
.driver_info = (unsigned long) &moschip_info,
|
|
},
|
|
{
|
|
USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
|
|
.driver_info = (unsigned long) &moschip_info,
|
|
},
|
|
{
|
|
USB_DEVICE(MCS7830_VENDOR_ID, MCS7730_PRODUCT_ID),
|
|
.driver_info = (unsigned long) &moschip_info,
|
|
},
|
|
{
|
|
USB_DEVICE(SITECOM_VENDOR_ID, LN_030_PRODUCT_ID),
|
|
.driver_info = (unsigned long) &sitecom_info,
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, products);
|
|
|
|
static int mcs7830_reset_resume (struct usb_interface *intf)
|
|
{
|
|
/* YES, this function is successful enough that ethtool -d
|
|
does show same output pre-/post-suspend */
|
|
|
|
struct usbnet *dev = usb_get_intfdata(intf);
|
|
|
|
mcs7830_apply_base_config(dev);
|
|
|
|
usbnet_resume(intf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct usb_driver mcs7830_driver = {
|
|
.name = driver_name,
|
|
.id_table = products,
|
|
.probe = usbnet_probe,
|
|
.disconnect = usbnet_disconnect,
|
|
.suspend = usbnet_suspend,
|
|
.resume = usbnet_resume,
|
|
.reset_resume = mcs7830_reset_resume,
|
|
.disable_hub_initiated_lpm = 1,
|
|
};
|
|
|
|
module_usb_driver(mcs7830_driver);
|
|
|
|
MODULE_DESCRIPTION("USB to network adapter MCS7830)");
|
|
MODULE_LICENSE("GPL");
|