![Dominik Brodowski](/assets/img/avatar_default.png)
Page already had to be set to 0; Offset can easily be passed as parameter to pcmcia_map_mem_page. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2126 lines
61 KiB
C
2126 lines
61 KiB
C
/*======================================================================
|
|
|
|
A PCMCIA ethernet driver for SMC91c92-based cards.
|
|
|
|
This driver supports Megahertz PCMCIA ethernet cards; and
|
|
Megahertz, Motorola, Ositech, and Psion Dacom ethernet/modem
|
|
multifunction cards.
|
|
|
|
Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
|
|
|
|
smc91c92_cs.c 1.122 2002/10/25 06:26:39
|
|
|
|
This driver contains code written by Donald Becker
|
|
(becker@scyld.com), Rowan Hughes (x-csrdh@jcu.edu.au),
|
|
David Hinds (dahinds@users.sourceforge.net), and Erik Stahlman
|
|
(erik@vt.edu). Donald wrote the SMC 91c92 code using parts of
|
|
Erik's SMC 91c94 driver. Rowan wrote a similar driver, and I've
|
|
incorporated some parts of his driver here. I (Dave) wrote most
|
|
of the PCMCIA glue code, and the Ositech support code. Kelly
|
|
Stephens (kstephen@holli.com) added support for the Motorola
|
|
Mariner, with help from Allen Brost.
|
|
|
|
This software may be used and distributed according to the terms of
|
|
the GNU General Public License, incorporated herein by reference.
|
|
|
|
======================================================================*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/firmware.h>
|
|
|
|
#include <pcmcia/cs.h>
|
|
#include <pcmcia/cistpl.h>
|
|
#include <pcmcia/cisreg.h>
|
|
#include <pcmcia/ciscode.h>
|
|
#include <pcmcia/ds.h>
|
|
#include <pcmcia/ss.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
/*====================================================================*/
|
|
|
|
static const char *if_names[] = { "auto", "10baseT", "10base2"};
|
|
|
|
/* Firmware name */
|
|
#define FIRMWARE_NAME "ositech/Xilinx7OD.bin"
|
|
|
|
/* Module parameters */
|
|
|
|
MODULE_DESCRIPTION("SMC 91c92 series PCMCIA ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE(FIRMWARE_NAME);
|
|
|
|
#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
|
|
|
|
/*
|
|
Transceiver/media type.
|
|
0 = auto
|
|
1 = 10baseT (and autoselect if #define AUTOSELECT),
|
|
2 = AUI/10base2,
|
|
*/
|
|
INT_MODULE_PARM(if_port, 0);
|
|
|
|
|
|
#define DRV_NAME "smc91c92_cs"
|
|
#define DRV_VERSION "1.123"
|
|
|
|
/*====================================================================*/
|
|
|
|
/* Operational parameter that usually are not changed. */
|
|
|
|
/* Time in jiffies before concluding Tx hung */
|
|
#define TX_TIMEOUT ((400*HZ)/1000)
|
|
|
|
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
|
|
#define INTR_WORK 4
|
|
|
|
/* Times to check the check the chip before concluding that it doesn't
|
|
currently have room for another Tx packet. */
|
|
#define MEMORY_WAIT_TIME 8
|
|
|
|
struct smc_private {
|
|
struct pcmcia_device *p_dev;
|
|
spinlock_t lock;
|
|
u_short manfid;
|
|
u_short cardid;
|
|
|
|
struct sk_buff *saved_skb;
|
|
int packets_waiting;
|
|
void __iomem *base;
|
|
u_short cfg;
|
|
struct timer_list media;
|
|
int watchdog, tx_err;
|
|
u_short media_status;
|
|
u_short fast_poll;
|
|
u_short link_status;
|
|
struct mii_if_info mii_if;
|
|
int duplex;
|
|
int rx_ovrn;
|
|
};
|
|
|
|
/* Special definitions for Megahertz multifunction cards */
|
|
#define MEGAHERTZ_ISR 0x0380
|
|
|
|
/* Special function registers for Motorola Mariner */
|
|
#define MOT_LAN 0x0000
|
|
#define MOT_UART 0x0020
|
|
#define MOT_EEPROM 0x20
|
|
|
|
#define MOT_NORMAL \
|
|
(COR_LEVEL_REQ | COR_FUNC_ENA | COR_ADDR_DECODE | COR_IREQ_ENA)
|
|
|
|
/* Special function registers for Ositech cards */
|
|
#define OSITECH_AUI_CTL 0x0c
|
|
#define OSITECH_PWRDOWN 0x0d
|
|
#define OSITECH_RESET 0x0e
|
|
#define OSITECH_ISR 0x0f
|
|
#define OSITECH_AUI_PWR 0x0c
|
|
#define OSITECH_RESET_ISR 0x0e
|
|
|
|
#define OSI_AUI_PWR 0x40
|
|
#define OSI_LAN_PWRDOWN 0x02
|
|
#define OSI_MODEM_PWRDOWN 0x01
|
|
#define OSI_LAN_RESET 0x02
|
|
#define OSI_MODEM_RESET 0x01
|
|
|
|
/* Symbolic constants for the SMC91c9* series chips, from Erik Stahlman. */
|
|
#define BANK_SELECT 14 /* Window select register. */
|
|
#define SMC_SELECT_BANK(x) { outw(x, ioaddr + BANK_SELECT); }
|
|
|
|
/* Bank 0 registers. */
|
|
#define TCR 0 /* transmit control register */
|
|
#define TCR_CLEAR 0 /* do NOTHING */
|
|
#define TCR_ENABLE 0x0001 /* if this is 1, we can transmit */
|
|
#define TCR_PAD_EN 0x0080 /* pads short packets to 64 bytes */
|
|
#define TCR_MONCSN 0x0400 /* Monitor Carrier. */
|
|
#define TCR_FDUPLX 0x0800 /* Full duplex mode. */
|
|
#define TCR_NORMAL TCR_ENABLE | TCR_PAD_EN
|
|
|
|
#define EPH 2 /* Ethernet Protocol Handler report. */
|
|
#define EPH_TX_SUC 0x0001
|
|
#define EPH_SNGLCOL 0x0002
|
|
#define EPH_MULCOL 0x0004
|
|
#define EPH_LTX_MULT 0x0008
|
|
#define EPH_16COL 0x0010
|
|
#define EPH_SQET 0x0020
|
|
#define EPH_LTX_BRD 0x0040
|
|
#define EPH_TX_DEFR 0x0080
|
|
#define EPH_LAT_COL 0x0200
|
|
#define EPH_LOST_CAR 0x0400
|
|
#define EPH_EXC_DEF 0x0800
|
|
#define EPH_CTR_ROL 0x1000
|
|
#define EPH_RX_OVRN 0x2000
|
|
#define EPH_LINK_OK 0x4000
|
|
#define EPH_TX_UNRN 0x8000
|
|
#define MEMINFO 8 /* Memory Information Register */
|
|
#define MEMCFG 10 /* Memory Configuration Register */
|
|
|
|
/* Bank 1 registers. */
|
|
#define CONFIG 0
|
|
#define CFG_MII_SELECT 0x8000 /* 91C100 only */
|
|
#define CFG_NO_WAIT 0x1000
|
|
#define CFG_FULL_STEP 0x0400
|
|
#define CFG_SET_SQLCH 0x0200
|
|
#define CFG_AUI_SELECT 0x0100
|
|
#define CFG_16BIT 0x0080
|
|
#define CFG_DIS_LINK 0x0040
|
|
#define CFG_STATIC 0x0030
|
|
#define CFG_IRQ_SEL_1 0x0004
|
|
#define CFG_IRQ_SEL_0 0x0002
|
|
#define BASE_ADDR 2
|
|
#define ADDR0 4
|
|
#define GENERAL 10
|
|
#define CONTROL 12
|
|
#define CTL_STORE 0x0001
|
|
#define CTL_RELOAD 0x0002
|
|
#define CTL_EE_SELECT 0x0004
|
|
#define CTL_TE_ENABLE 0x0020
|
|
#define CTL_CR_ENABLE 0x0040
|
|
#define CTL_LE_ENABLE 0x0080
|
|
#define CTL_AUTO_RELEASE 0x0800
|
|
#define CTL_POWERDOWN 0x2000
|
|
|
|
/* Bank 2 registers. */
|
|
#define MMU_CMD 0
|
|
#define MC_ALLOC 0x20 /* or with number of 256 byte packets */
|
|
#define MC_RESET 0x40
|
|
#define MC_RELEASE 0x80 /* remove and release the current rx packet */
|
|
#define MC_FREEPKT 0xA0 /* Release packet in PNR register */
|
|
#define MC_ENQUEUE 0xC0 /* Enqueue the packet for transmit */
|
|
#define PNR_ARR 2
|
|
#define FIFO_PORTS 4
|
|
#define FP_RXEMPTY 0x8000
|
|
#define POINTER 6
|
|
#define PTR_AUTO_INC 0x0040
|
|
#define PTR_READ 0x2000
|
|
#define PTR_AUTOINC 0x4000
|
|
#define PTR_RCV 0x8000
|
|
#define DATA_1 8
|
|
#define INTERRUPT 12
|
|
#define IM_RCV_INT 0x1
|
|
#define IM_TX_INT 0x2
|
|
#define IM_TX_EMPTY_INT 0x4
|
|
#define IM_ALLOC_INT 0x8
|
|
#define IM_RX_OVRN_INT 0x10
|
|
#define IM_EPH_INT 0x20
|
|
|
|
#define RCR 4
|
|
enum RxCfg { RxAllMulti = 0x0004, RxPromisc = 0x0002,
|
|
RxEnable = 0x0100, RxStripCRC = 0x0200};
|
|
#define RCR_SOFTRESET 0x8000 /* resets the chip */
|
|
#define RCR_STRIP_CRC 0x200 /* strips CRC */
|
|
#define RCR_ENABLE 0x100 /* IFF this is set, we can receive packets */
|
|
#define RCR_ALMUL 0x4 /* receive all multicast packets */
|
|
#define RCR_PROMISC 0x2 /* enable promiscuous mode */
|
|
|
|
/* the normal settings for the RCR register : */
|
|
#define RCR_NORMAL (RCR_STRIP_CRC | RCR_ENABLE)
|
|
#define RCR_CLEAR 0x0 /* set it to a base state */
|
|
#define COUNTER 6
|
|
|
|
/* BANK 3 -- not the same values as in smc9194! */
|
|
#define MULTICAST0 0
|
|
#define MULTICAST2 2
|
|
#define MULTICAST4 4
|
|
#define MULTICAST6 6
|
|
#define MGMT 8
|
|
#define REVISION 0x0a
|
|
|
|
/* Transmit status bits. */
|
|
#define TS_SUCCESS 0x0001
|
|
#define TS_16COL 0x0010
|
|
#define TS_LATCOL 0x0200
|
|
#define TS_LOSTCAR 0x0400
|
|
|
|
/* Receive status bits. */
|
|
#define RS_ALGNERR 0x8000
|
|
#define RS_BADCRC 0x2000
|
|
#define RS_ODDFRAME 0x1000
|
|
#define RS_TOOLONG 0x0800
|
|
#define RS_TOOSHORT 0x0400
|
|
#define RS_MULTICAST 0x0001
|
|
#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
|
|
|
|
#define set_bits(v, p) outw(inw(p)|(v), (p))
|
|
#define mask_bits(v, p) outw(inw(p)&(v), (p))
|
|
|
|
/*====================================================================*/
|
|
|
|
static void smc91c92_detach(struct pcmcia_device *p_dev);
|
|
static int smc91c92_config(struct pcmcia_device *link);
|
|
static void smc91c92_release(struct pcmcia_device *link);
|
|
|
|
static int smc_open(struct net_device *dev);
|
|
static int smc_close(struct net_device *dev);
|
|
static int smc_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static void smc_tx_timeout(struct net_device *dev);
|
|
static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
|
|
struct net_device *dev);
|
|
static irqreturn_t smc_interrupt(int irq, void *dev_id);
|
|
static void smc_rx(struct net_device *dev);
|
|
static void set_rx_mode(struct net_device *dev);
|
|
static int s9k_config(struct net_device *dev, struct ifmap *map);
|
|
static void smc_set_xcvr(struct net_device *dev, int if_port);
|
|
static void smc_reset(struct net_device *dev);
|
|
static void media_check(u_long arg);
|
|
static void mdio_sync(unsigned int addr);
|
|
static int mdio_read(struct net_device *dev, int phy_id, int loc);
|
|
static void mdio_write(struct net_device *dev, int phy_id, int loc, int value);
|
|
static int smc_link_ok(struct net_device *dev);
|
|
static const struct ethtool_ops ethtool_ops;
|
|
|
|
static const struct net_device_ops smc_netdev_ops = {
|
|
.ndo_open = smc_open,
|
|
.ndo_stop = smc_close,
|
|
.ndo_start_xmit = smc_start_xmit,
|
|
.ndo_tx_timeout = smc_tx_timeout,
|
|
.ndo_set_config = s9k_config,
|
|
.ndo_set_multicast_list = set_rx_mode,
|
|
.ndo_do_ioctl = &smc_ioctl,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
};
|
|
|
|
/*======================================================================
|
|
|
|
smc91c92_attach() creates an "instance" of the driver, allocating
|
|
local data structures for one device. The device is registered
|
|
with Card Services.
|
|
|
|
======================================================================*/
|
|
|
|
static int smc91c92_probe(struct pcmcia_device *link)
|
|
{
|
|
struct smc_private *smc;
|
|
struct net_device *dev;
|
|
|
|
dev_dbg(&link->dev, "smc91c92_attach()\n");
|
|
|
|
/* Create new ethernet device */
|
|
dev = alloc_etherdev(sizeof(struct smc_private));
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
smc = netdev_priv(dev);
|
|
smc->p_dev = link;
|
|
link->priv = dev;
|
|
|
|
spin_lock_init(&smc->lock);
|
|
link->resource[0]->end = 16;
|
|
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
|
|
link->conf.Attributes = CONF_ENABLE_IRQ;
|
|
link->conf.IntType = INT_MEMORY_AND_IO;
|
|
|
|
/* The SMC91c92-specific entries in the device structure. */
|
|
dev->netdev_ops = &smc_netdev_ops;
|
|
SET_ETHTOOL_OPS(dev, ðtool_ops);
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
|
|
smc->mii_if.dev = dev;
|
|
smc->mii_if.mdio_read = mdio_read;
|
|
smc->mii_if.mdio_write = mdio_write;
|
|
smc->mii_if.phy_id_mask = 0x1f;
|
|
smc->mii_if.reg_num_mask = 0x1f;
|
|
|
|
return smc91c92_config(link);
|
|
} /* smc91c92_attach */
|
|
|
|
/*======================================================================
|
|
|
|
This deletes a driver "instance". The device is de-registered
|
|
with Card Services. If it has been released, all local data
|
|
structures are freed. Otherwise, the structures will be freed
|
|
when the device is released.
|
|
|
|
======================================================================*/
|
|
|
|
static void smc91c92_detach(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
|
|
dev_dbg(&link->dev, "smc91c92_detach\n");
|
|
|
|
unregister_netdev(dev);
|
|
|
|
smc91c92_release(link);
|
|
|
|
free_netdev(dev);
|
|
} /* smc91c92_detach */
|
|
|
|
/*====================================================================*/
|
|
|
|
static int cvt_ascii_address(struct net_device *dev, char *s)
|
|
{
|
|
int i, j, da, c;
|
|
|
|
if (strlen(s) != 12)
|
|
return -1;
|
|
for (i = 0; i < 6; i++) {
|
|
da = 0;
|
|
for (j = 0; j < 2; j++) {
|
|
c = *s++;
|
|
da <<= 4;
|
|
da += ((c >= '0') && (c <= '9')) ?
|
|
(c - '0') : ((c & 0x0f) + 9);
|
|
}
|
|
dev->dev_addr[i] = da;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*====================================================================
|
|
|
|
Configuration stuff for Megahertz cards
|
|
|
|
mhz_3288_power() is used to power up a 3288's ethernet chip.
|
|
mhz_mfc_config() handles socket setup for multifunction (1144
|
|
and 3288) cards. mhz_setup() gets a card's hardware ethernet
|
|
address.
|
|
|
|
======================================================================*/
|
|
|
|
static int mhz_3288_power(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
u_char tmp;
|
|
|
|
/* Read the ISR twice... */
|
|
readb(smc->base+MEGAHERTZ_ISR);
|
|
udelay(5);
|
|
readb(smc->base+MEGAHERTZ_ISR);
|
|
|
|
/* Pause 200ms... */
|
|
mdelay(200);
|
|
|
|
/* Now read and write the COR... */
|
|
tmp = readb(smc->base + link->conf.ConfigBase + CISREG_COR);
|
|
udelay(5);
|
|
writeb(tmp, smc->base + link->conf.ConfigBase + CISREG_COR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
|
|
cistpl_cftable_entry_t *cf,
|
|
cistpl_cftable_entry_t *dflt,
|
|
unsigned int vcc,
|
|
void *priv_data)
|
|
{
|
|
int k;
|
|
p_dev->resource[1]->start = cf->io.win[0].base;
|
|
for (k = 0; k < 0x400; k += 0x10) {
|
|
if (k & 0x80)
|
|
continue;
|
|
p_dev->resource[0]->start = k ^ 0x300;
|
|
p_dev->io_lines = 16;
|
|
if (!pcmcia_request_io(p_dev))
|
|
return 0;
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int mhz_mfc_config(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
win_req_t req;
|
|
unsigned int offset;
|
|
int i;
|
|
|
|
link->conf.Attributes |= CONF_ENABLE_SPKR;
|
|
link->conf.Status = CCSR_AUDIO_ENA;
|
|
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
|
|
link->resource[1]->end = 8;
|
|
|
|
/* The Megahertz combo cards have modem-like CIS entries, so
|
|
we have to explicitly try a bunch of port combinations. */
|
|
if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
|
|
return -ENODEV;
|
|
|
|
dev->base_addr = link->resource[0]->start;
|
|
|
|
/* Allocate a memory window, for accessing the ISR */
|
|
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
|
|
req.Base = req.Size = 0;
|
|
req.AccessSpeed = 0;
|
|
i = pcmcia_request_window(link, &req, &link->win);
|
|
if (i != 0)
|
|
return -ENODEV;
|
|
|
|
smc->base = ioremap(req.Base, req.Size);
|
|
offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0;
|
|
i = pcmcia_map_mem_page(link, link->win, offset);
|
|
if ((i == 0) &&
|
|
(smc->manfid == MANFID_MEGAHERTZ) &&
|
|
(smc->cardid == PRODID_MEGAHERTZ_EM3288))
|
|
mhz_3288_power(link);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcmcia_get_versmac(struct pcmcia_device *p_dev,
|
|
tuple_t *tuple,
|
|
void *priv)
|
|
{
|
|
struct net_device *dev = priv;
|
|
cisparse_t parse;
|
|
u8 *buf;
|
|
|
|
if (pcmcia_parse_tuple(tuple, &parse))
|
|
return -EINVAL;
|
|
|
|
buf = parse.version_1.str + parse.version_1.ofs[3];
|
|
|
|
if ((parse.version_1.ns > 3) && (cvt_ascii_address(dev, buf) == 0))
|
|
return 0;
|
|
|
|
return -EINVAL;
|
|
};
|
|
|
|
static int mhz_setup(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
size_t len;
|
|
u8 *buf;
|
|
int rc;
|
|
|
|
/* Read the station address from the CIS. It is stored as the last
|
|
(fourth) string in the Version 1 Version/ID tuple. */
|
|
if ((link->prod_id[3]) &&
|
|
(cvt_ascii_address(dev, link->prod_id[3]) == 0))
|
|
return 0;
|
|
|
|
/* Workarounds for broken cards start here. */
|
|
/* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
|
|
if (!pcmcia_loop_tuple(link, CISTPL_VERS_1, pcmcia_get_versmac, dev))
|
|
return 0;
|
|
|
|
/* Another possibility: for the EM3288, in a special tuple */
|
|
rc = -1;
|
|
len = pcmcia_get_tuple(link, 0x81, &buf);
|
|
if (buf && len >= 13) {
|
|
buf[12] = '\0';
|
|
if (cvt_ascii_address(dev, buf) == 0)
|
|
rc = 0;
|
|
}
|
|
kfree(buf);
|
|
|
|
return rc;
|
|
};
|
|
|
|
/*======================================================================
|
|
|
|
Configuration stuff for the Motorola Mariner
|
|
|
|
mot_config() writes directly to the Mariner configuration
|
|
registers because the CIS is just bogus.
|
|
|
|
======================================================================*/
|
|
|
|
static void mot_config(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
unsigned int iouart = link->resource[1]->start;
|
|
|
|
/* Set UART base address and force map with COR bit 1 */
|
|
writeb(iouart & 0xff, smc->base + MOT_UART + CISREG_IOBASE_0);
|
|
writeb((iouart >> 8) & 0xff, smc->base + MOT_UART + CISREG_IOBASE_1);
|
|
writeb(MOT_NORMAL, smc->base + MOT_UART + CISREG_COR);
|
|
|
|
/* Set SMC base address and force map with COR bit 1 */
|
|
writeb(ioaddr & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_0);
|
|
writeb((ioaddr >> 8) & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_1);
|
|
writeb(MOT_NORMAL, smc->base + MOT_LAN + CISREG_COR);
|
|
|
|
/* Wait for things to settle down */
|
|
mdelay(100);
|
|
}
|
|
|
|
static int mot_setup(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
unsigned int ioaddr = dev->base_addr;
|
|
int i, wait, loop;
|
|
u_int addr;
|
|
|
|
/* Read Ethernet address from Serial EEPROM */
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
SMC_SELECT_BANK(2);
|
|
outw(MOT_EEPROM + i, ioaddr + POINTER);
|
|
SMC_SELECT_BANK(1);
|
|
outw((CTL_RELOAD | CTL_EE_SELECT), ioaddr + CONTROL);
|
|
|
|
for (loop = wait = 0; loop < 200; loop++) {
|
|
udelay(10);
|
|
wait = ((CTL_RELOAD | CTL_STORE) & inw(ioaddr + CONTROL));
|
|
if (wait == 0) break;
|
|
}
|
|
|
|
if (wait)
|
|
return -1;
|
|
|
|
addr = inw(ioaddr + GENERAL);
|
|
dev->dev_addr[2*i] = addr & 0xff;
|
|
dev->dev_addr[2*i+1] = (addr >> 8) & 0xff;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*====================================================================*/
|
|
|
|
static int smc_configcheck(struct pcmcia_device *p_dev,
|
|
cistpl_cftable_entry_t *cf,
|
|
cistpl_cftable_entry_t *dflt,
|
|
unsigned int vcc,
|
|
void *priv_data)
|
|
{
|
|
p_dev->resource[0]->start = cf->io.win[0].base;
|
|
p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
|
|
return pcmcia_request_io(p_dev);
|
|
}
|
|
|
|
static int smc_config(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
int i;
|
|
|
|
link->resource[0]->end = 16;
|
|
i = pcmcia_loop_config(link, smc_configcheck, NULL);
|
|
if (!i)
|
|
dev->base_addr = link->resource[0]->start;
|
|
|
|
return i;
|
|
}
|
|
|
|
|
|
static int smc_setup(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
|
|
/* Check for a LAN function extension tuple */
|
|
if (!pcmcia_get_mac_from_cis(link, dev))
|
|
return 0;
|
|
|
|
/* Try the third string in the Version 1 Version/ID tuple. */
|
|
if (link->prod_id[2]) {
|
|
if (cvt_ascii_address(dev, link->prod_id[2]) == 0)
|
|
return 0;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
/*====================================================================*/
|
|
|
|
static int osi_config(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
|
|
int i, j;
|
|
|
|
link->conf.Attributes |= CONF_ENABLE_SPKR;
|
|
link->conf.Status = CCSR_AUDIO_ENA;
|
|
link->resource[0]->end = 64;
|
|
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
|
|
link->resource[1]->end = 8;
|
|
|
|
/* Enable Hard Decode, LAN, Modem */
|
|
link->conf.ConfigIndex = 0x23;
|
|
link->io_lines = 16;
|
|
|
|
for (i = j = 0; j < 4; j++) {
|
|
link->resource[1]->start = com[j];
|
|
i = pcmcia_request_io(link);
|
|
if (i == 0)
|
|
break;
|
|
}
|
|
if (i != 0) {
|
|
/* Fallback: turn off hard decode */
|
|
link->conf.ConfigIndex = 0x03;
|
|
link->resource[1]->end = 0;
|
|
i = pcmcia_request_io(link);
|
|
}
|
|
dev->base_addr = link->resource[0]->start + 0x10;
|
|
return i;
|
|
}
|
|
|
|
static int osi_load_firmware(struct pcmcia_device *link)
|
|
{
|
|
const struct firmware *fw;
|
|
int i, err;
|
|
|
|
err = request_firmware(&fw, FIRMWARE_NAME, &link->dev);
|
|
if (err) {
|
|
pr_err("Failed to load firmware \"%s\"\n", FIRMWARE_NAME);
|
|
return err;
|
|
}
|
|
|
|
/* Download the Seven of Diamonds firmware */
|
|
for (i = 0; i < fw->size; i++) {
|
|
outb(fw->data[i], link->resource[0]->start + 2);
|
|
udelay(50);
|
|
}
|
|
release_firmware(fw);
|
|
return err;
|
|
}
|
|
|
|
static int pcmcia_osi_mac(struct pcmcia_device *p_dev,
|
|
tuple_t *tuple,
|
|
void *priv)
|
|
{
|
|
struct net_device *dev = priv;
|
|
int i;
|
|
|
|
if (tuple->TupleDataLen < 8)
|
|
return -EINVAL;
|
|
if (tuple->TupleData[0] != 0x04)
|
|
return -EINVAL;
|
|
for (i = 0; i < 6; i++)
|
|
dev->dev_addr[i] = tuple->TupleData[i+2];
|
|
return 0;
|
|
};
|
|
|
|
|
|
static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
int rc;
|
|
|
|
/* Read the station address from tuple 0x90, subtuple 0x04 */
|
|
if (pcmcia_loop_tuple(link, 0x90, pcmcia_osi_mac, dev))
|
|
return -1;
|
|
|
|
if (((manfid == MANFID_OSITECH) &&
|
|
(cardid == PRODID_OSITECH_SEVEN)) ||
|
|
((manfid == MANFID_PSION) &&
|
|
(cardid == PRODID_PSION_NET100))) {
|
|
rc = osi_load_firmware(link);
|
|
if (rc)
|
|
return rc;
|
|
} else if (manfid == MANFID_OSITECH) {
|
|
/* Make sure both functions are powered up */
|
|
set_bits(0x300, link->resource[0]->start + OSITECH_AUI_PWR);
|
|
/* Now, turn on the interrupt for both card functions */
|
|
set_bits(0x300, link->resource[0]->start + OSITECH_RESET_ISR);
|
|
dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
|
|
inw(link->resource[0]->start + OSITECH_AUI_PWR),
|
|
inw(link->resource[0]->start + OSITECH_RESET_ISR));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int smc91c92_suspend(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
|
|
if (link->open)
|
|
netif_device_detach(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smc91c92_resume(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
int i;
|
|
|
|
if ((smc->manfid == MANFID_MEGAHERTZ) &&
|
|
(smc->cardid == PRODID_MEGAHERTZ_EM3288))
|
|
mhz_3288_power(link);
|
|
if (smc->manfid == MANFID_MOTOROLA)
|
|
mot_config(link);
|
|
if ((smc->manfid == MANFID_OSITECH) &&
|
|
(smc->cardid != PRODID_OSITECH_SEVEN)) {
|
|
/* Power up the card and enable interrupts */
|
|
set_bits(0x0300, dev->base_addr-0x10+OSITECH_AUI_PWR);
|
|
set_bits(0x0300, dev->base_addr-0x10+OSITECH_RESET_ISR);
|
|
}
|
|
if (((smc->manfid == MANFID_OSITECH) &&
|
|
(smc->cardid == PRODID_OSITECH_SEVEN)) ||
|
|
((smc->manfid == MANFID_PSION) &&
|
|
(smc->cardid == PRODID_PSION_NET100))) {
|
|
i = osi_load_firmware(link);
|
|
if (i) {
|
|
pr_err("smc91c92_cs: Failed to load firmware\n");
|
|
return i;
|
|
}
|
|
}
|
|
if (link->open) {
|
|
smc_reset(dev);
|
|
netif_device_attach(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*======================================================================
|
|
|
|
This verifies that the chip is some SMC91cXX variant, and returns
|
|
the revision code if successful. Otherwise, it returns -ENODEV.
|
|
|
|
======================================================================*/
|
|
|
|
static int check_sig(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
unsigned int ioaddr = dev->base_addr;
|
|
int width;
|
|
u_short s;
|
|
|
|
SMC_SELECT_BANK(1);
|
|
if (inw(ioaddr + BANK_SELECT) >> 8 != 0x33) {
|
|
/* Try powering up the chip */
|
|
outw(0, ioaddr + CONTROL);
|
|
mdelay(55);
|
|
}
|
|
|
|
/* Try setting bus width */
|
|
width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO);
|
|
s = inb(ioaddr + CONFIG);
|
|
if (width)
|
|
s |= CFG_16BIT;
|
|
else
|
|
s &= ~CFG_16BIT;
|
|
outb(s, ioaddr + CONFIG);
|
|
|
|
/* Check Base Address Register to make sure bus width is OK */
|
|
s = inw(ioaddr + BASE_ADDR);
|
|
if ((inw(ioaddr + BANK_SELECT) >> 8 == 0x33) &&
|
|
((s >> 8) != (s & 0xff))) {
|
|
SMC_SELECT_BANK(3);
|
|
s = inw(ioaddr + REVISION);
|
|
return (s & 0xff);
|
|
}
|
|
|
|
if (width) {
|
|
modconf_t mod = {
|
|
.Attributes = CONF_IO_CHANGE_WIDTH,
|
|
};
|
|
printk(KERN_INFO "smc91c92_cs: using 8-bit IO window.\n");
|
|
|
|
smc91c92_suspend(link);
|
|
pcmcia_modify_configuration(link, &mod);
|
|
smc91c92_resume(link);
|
|
return check_sig(link);
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
smc91c92_config() is scheduled to run after a CARD_INSERTION event
|
|
is received, to configure the PCMCIA socket, and to make the
|
|
ethernet device available to the system.
|
|
|
|
======================================================================*/
|
|
|
|
static int smc91c92_config(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
char *name;
|
|
int i, j, rev;
|
|
unsigned int ioaddr;
|
|
u_long mir;
|
|
|
|
dev_dbg(&link->dev, "smc91c92_config\n");
|
|
|
|
smc->manfid = link->manf_id;
|
|
smc->cardid = link->card_id;
|
|
|
|
if ((smc->manfid == MANFID_OSITECH) &&
|
|
(smc->cardid != PRODID_OSITECH_SEVEN)) {
|
|
i = osi_config(link);
|
|
} else if ((smc->manfid == MANFID_MOTOROLA) ||
|
|
((smc->manfid == MANFID_MEGAHERTZ) &&
|
|
((smc->cardid == PRODID_MEGAHERTZ_VARIOUS) ||
|
|
(smc->cardid == PRODID_MEGAHERTZ_EM3288)))) {
|
|
i = mhz_mfc_config(link);
|
|
} else {
|
|
i = smc_config(link);
|
|
}
|
|
if (i)
|
|
goto config_failed;
|
|
|
|
i = pcmcia_request_irq(link, smc_interrupt);
|
|
if (i)
|
|
goto config_failed;
|
|
i = pcmcia_request_configuration(link, &link->conf);
|
|
if (i)
|
|
goto config_failed;
|
|
|
|
if (smc->manfid == MANFID_MOTOROLA)
|
|
mot_config(link);
|
|
|
|
dev->irq = link->irq;
|
|
|
|
if ((if_port >= 0) && (if_port <= 2))
|
|
dev->if_port = if_port;
|
|
else
|
|
printk(KERN_NOTICE "smc91c92_cs: invalid if_port requested\n");
|
|
|
|
switch (smc->manfid) {
|
|
case MANFID_OSITECH:
|
|
case MANFID_PSION:
|
|
i = osi_setup(link, smc->manfid, smc->cardid); break;
|
|
case MANFID_SMC:
|
|
case MANFID_NEW_MEDIA:
|
|
i = smc_setup(link); break;
|
|
case 0x128: /* For broken Megahertz cards */
|
|
case MANFID_MEGAHERTZ:
|
|
i = mhz_setup(link); break;
|
|
case MANFID_MOTOROLA:
|
|
default: /* get the hw address from EEPROM */
|
|
i = mot_setup(link); break;
|
|
}
|
|
|
|
if (i != 0) {
|
|
printk(KERN_NOTICE "smc91c92_cs: Unable to find hardware address.\n");
|
|
goto config_failed;
|
|
}
|
|
|
|
smc->duplex = 0;
|
|
smc->rx_ovrn = 0;
|
|
|
|
rev = check_sig(link);
|
|
name = "???";
|
|
if (rev > 0)
|
|
switch (rev >> 4) {
|
|
case 3: name = "92"; break;
|
|
case 4: name = ((rev & 15) >= 6) ? "96" : "94"; break;
|
|
case 5: name = "95"; break;
|
|
case 7: name = "100"; break;
|
|
case 8: name = "100-FD"; break;
|
|
case 9: name = "110"; break;
|
|
}
|
|
|
|
ioaddr = dev->base_addr;
|
|
if (rev > 0) {
|
|
u_long mcr;
|
|
SMC_SELECT_BANK(0);
|
|
mir = inw(ioaddr + MEMINFO) & 0xff;
|
|
if (mir == 0xff) mir++;
|
|
/* Get scale factor for memory size */
|
|
mcr = ((rev >> 4) > 3) ? inw(ioaddr + MEMCFG) : 0x0200;
|
|
mir *= 128 * (1<<((mcr >> 9) & 7));
|
|
SMC_SELECT_BANK(1);
|
|
smc->cfg = inw(ioaddr + CONFIG) & ~CFG_AUI_SELECT;
|
|
smc->cfg |= CFG_NO_WAIT | CFG_16BIT | CFG_STATIC;
|
|
if (smc->manfid == MANFID_OSITECH)
|
|
smc->cfg |= CFG_IRQ_SEL_1 | CFG_IRQ_SEL_0;
|
|
if ((rev >> 4) >= 7)
|
|
smc->cfg |= CFG_MII_SELECT;
|
|
} else
|
|
mir = 0;
|
|
|
|
if (smc->cfg & CFG_MII_SELECT) {
|
|
SMC_SELECT_BANK(3);
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
j = mdio_read(dev, i, 1);
|
|
if ((j != 0) && (j != 0xffff)) break;
|
|
}
|
|
smc->mii_if.phy_id = (i < 32) ? i : -1;
|
|
|
|
SMC_SELECT_BANK(0);
|
|
}
|
|
|
|
SET_NETDEV_DEV(dev, &link->dev);
|
|
|
|
if (register_netdev(dev) != 0) {
|
|
printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n");
|
|
goto config_undo;
|
|
}
|
|
|
|
printk(KERN_INFO "%s: smc91c%s rev %d: io %#3lx, irq %d, "
|
|
"hw_addr %pM\n",
|
|
dev->name, name, (rev & 0x0f), dev->base_addr, dev->irq,
|
|
dev->dev_addr);
|
|
|
|
if (rev > 0) {
|
|
if (mir & 0x3ff)
|
|
printk(KERN_INFO " %lu byte", mir);
|
|
else
|
|
printk(KERN_INFO " %lu kb", mir>>10);
|
|
printk(" buffer, %s xcvr\n", (smc->cfg & CFG_MII_SELECT) ?
|
|
"MII" : if_names[dev->if_port]);
|
|
}
|
|
|
|
if (smc->cfg & CFG_MII_SELECT) {
|
|
if (smc->mii_if.phy_id != -1) {
|
|
dev_dbg(&link->dev, " MII transceiver at index %d, status %x.\n",
|
|
smc->mii_if.phy_id, j);
|
|
} else {
|
|
printk(KERN_NOTICE " No MII transceivers found!\n");
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
config_undo:
|
|
unregister_netdev(dev);
|
|
config_failed:
|
|
smc91c92_release(link);
|
|
free_netdev(dev);
|
|
return -ENODEV;
|
|
} /* smc91c92_config */
|
|
|
|
/*======================================================================
|
|
|
|
After a card is removed, smc91c92_release() will unregister the net
|
|
device, and release the PCMCIA configuration. If the device is
|
|
still open, this will be postponed until it is closed.
|
|
|
|
======================================================================*/
|
|
|
|
static void smc91c92_release(struct pcmcia_device *link)
|
|
{
|
|
dev_dbg(&link->dev, "smc91c92_release\n");
|
|
if (link->win) {
|
|
struct net_device *dev = link->priv;
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
iounmap(smc->base);
|
|
}
|
|
pcmcia_disable_device(link);
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
MII interface support for SMC91cXX based cards
|
|
======================================================================*/
|
|
|
|
#define MDIO_SHIFT_CLK 0x04
|
|
#define MDIO_DATA_OUT 0x01
|
|
#define MDIO_DIR_WRITE 0x08
|
|
#define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE)
|
|
#define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT)
|
|
#define MDIO_DATA_READ 0x02
|
|
|
|
static void mdio_sync(unsigned int addr)
|
|
{
|
|
int bits;
|
|
for (bits = 0; bits < 32; bits++) {
|
|
outb(MDIO_DATA_WRITE1, addr);
|
|
outb(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr);
|
|
}
|
|
}
|
|
|
|
static int mdio_read(struct net_device *dev, int phy_id, int loc)
|
|
{
|
|
unsigned int addr = dev->base_addr + MGMT;
|
|
u_int cmd = (0x06<<10)|(phy_id<<5)|loc;
|
|
int i, retval = 0;
|
|
|
|
mdio_sync(addr);
|
|
for (i = 13; i >= 0; i--) {
|
|
int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
|
|
outb(dat, addr);
|
|
outb(dat | MDIO_SHIFT_CLK, addr);
|
|
}
|
|
for (i = 19; i > 0; i--) {
|
|
outb(0, addr);
|
|
retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0);
|
|
outb(MDIO_SHIFT_CLK, addr);
|
|
}
|
|
return (retval>>1) & 0xffff;
|
|
}
|
|
|
|
static void mdio_write(struct net_device *dev, int phy_id, int loc, int value)
|
|
{
|
|
unsigned int addr = dev->base_addr + MGMT;
|
|
u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value;
|
|
int i;
|
|
|
|
mdio_sync(addr);
|
|
for (i = 31; i >= 0; i--) {
|
|
int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
|
|
outb(dat, addr);
|
|
outb(dat | MDIO_SHIFT_CLK, addr);
|
|
}
|
|
for (i = 1; i >= 0; i--) {
|
|
outb(0, addr);
|
|
outb(MDIO_SHIFT_CLK, addr);
|
|
}
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
The driver core code, most of which should be common with a
|
|
non-PCMCIA implementation.
|
|
|
|
======================================================================*/
|
|
|
|
#ifdef PCMCIA_DEBUG
|
|
static void smc_dump(struct net_device *dev)
|
|
{
|
|
unsigned int ioaddr = dev->base_addr;
|
|
u_short i, w, save;
|
|
save = inw(ioaddr + BANK_SELECT);
|
|
for (w = 0; w < 4; w++) {
|
|
SMC_SELECT_BANK(w);
|
|
printk(KERN_DEBUG "bank %d: ", w);
|
|
for (i = 0; i < 14; i += 2)
|
|
printk(" %04x", inw(ioaddr + i));
|
|
printk("\n");
|
|
}
|
|
outw(save, ioaddr + BANK_SELECT);
|
|
}
|
|
#endif
|
|
|
|
static int smc_open(struct net_device *dev)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
struct pcmcia_device *link = smc->p_dev;
|
|
|
|
dev_dbg(&link->dev, "%s: smc_open(%p), ID/Window %4.4x.\n",
|
|
dev->name, dev, inw(dev->base_addr + BANK_SELECT));
|
|
#ifdef PCMCIA_DEBUG
|
|
smc_dump(dev);
|
|
#endif
|
|
|
|
/* Check that the PCMCIA card is still here. */
|
|
if (!pcmcia_dev_present(link))
|
|
return -ENODEV;
|
|
/* Physical device present signature. */
|
|
if (check_sig(link) < 0) {
|
|
printk("smc91c92_cs: Yikes! Bad chip signature!\n");
|
|
return -ENODEV;
|
|
}
|
|
link->open++;
|
|
|
|
netif_start_queue(dev);
|
|
smc->saved_skb = NULL;
|
|
smc->packets_waiting = 0;
|
|
|
|
smc_reset(dev);
|
|
init_timer(&smc->media);
|
|
smc->media.function = &media_check;
|
|
smc->media.data = (u_long) dev;
|
|
smc->media.expires = jiffies + HZ;
|
|
add_timer(&smc->media);
|
|
|
|
return 0;
|
|
} /* smc_open */
|
|
|
|
/*====================================================================*/
|
|
|
|
static int smc_close(struct net_device *dev)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
struct pcmcia_device *link = smc->p_dev;
|
|
unsigned int ioaddr = dev->base_addr;
|
|
|
|
dev_dbg(&link->dev, "%s: smc_close(), status %4.4x.\n",
|
|
dev->name, inw(ioaddr + BANK_SELECT));
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
/* Shut off all interrupts, and turn off the Tx and Rx sections.
|
|
Don't bother to check for chip present. */
|
|
SMC_SELECT_BANK(2); /* Nominally paranoia, but do no assume... */
|
|
outw(0, ioaddr + INTERRUPT);
|
|
SMC_SELECT_BANK(0);
|
|
mask_bits(0xff00, ioaddr + RCR);
|
|
mask_bits(0xff00, ioaddr + TCR);
|
|
|
|
/* Put the chip into power-down mode. */
|
|
SMC_SELECT_BANK(1);
|
|
outw(CTL_POWERDOWN, ioaddr + CONTROL );
|
|
|
|
link->open--;
|
|
del_timer_sync(&smc->media);
|
|
|
|
return 0;
|
|
} /* smc_close */
|
|
|
|
/*======================================================================
|
|
|
|
Transfer a packet to the hardware and trigger the packet send.
|
|
This may be called at either from either the Tx queue code
|
|
or the interrupt handler.
|
|
|
|
======================================================================*/
|
|
|
|
static void smc_hardware_send_packet(struct net_device * dev)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
struct sk_buff *skb = smc->saved_skb;
|
|
unsigned int ioaddr = dev->base_addr;
|
|
u_char packet_no;
|
|
|
|
if (!skb) {
|
|
printk(KERN_ERR "%s: In XMIT with no packet to send.\n", dev->name);
|
|
return;
|
|
}
|
|
|
|
/* There should be a packet slot waiting. */
|
|
packet_no = inw(ioaddr + PNR_ARR) >> 8;
|
|
if (packet_no & 0x80) {
|
|
/* If not, there is a hardware problem! Likely an ejected card. */
|
|
printk(KERN_WARNING "%s: 91c92 hardware Tx buffer allocation"
|
|
" failed, status %#2.2x.\n", dev->name, packet_no);
|
|
dev_kfree_skb_irq(skb);
|
|
smc->saved_skb = NULL;
|
|
netif_start_queue(dev);
|
|
return;
|
|
}
|
|
|
|
dev->stats.tx_bytes += skb->len;
|
|
/* The card should use the just-allocated buffer. */
|
|
outw(packet_no, ioaddr + PNR_ARR);
|
|
/* point to the beginning of the packet */
|
|
outw(PTR_AUTOINC , ioaddr + POINTER);
|
|
|
|
/* Send the packet length (+6 for status, length and ctl byte)
|
|
and the status word (set to zeros). */
|
|
{
|
|
u_char *buf = skb->data;
|
|
u_int length = skb->len; /* The chip will pad to ethernet min. */
|
|
|
|
pr_debug("%s: Trying to xmit packet of length %d.\n",
|
|
dev->name, length);
|
|
|
|
/* send the packet length: +6 for status word, length, and ctl */
|
|
outw(0, ioaddr + DATA_1);
|
|
outw(length + 6, ioaddr + DATA_1);
|
|
outsw(ioaddr + DATA_1, buf, length >> 1);
|
|
|
|
/* The odd last byte, if there is one, goes in the control word. */
|
|
outw((length & 1) ? 0x2000 | buf[length-1] : 0, ioaddr + DATA_1);
|
|
}
|
|
|
|
/* Enable the Tx interrupts, both Tx (TxErr) and TxEmpty. */
|
|
outw(((IM_TX_INT|IM_TX_EMPTY_INT)<<8) |
|
|
(inw(ioaddr + INTERRUPT) & 0xff00),
|
|
ioaddr + INTERRUPT);
|
|
|
|
/* The chip does the rest of the work. */
|
|
outw(MC_ENQUEUE , ioaddr + MMU_CMD);
|
|
|
|
smc->saved_skb = NULL;
|
|
dev_kfree_skb_irq(skb);
|
|
dev->trans_start = jiffies;
|
|
netif_start_queue(dev);
|
|
}
|
|
|
|
/*====================================================================*/
|
|
|
|
static void smc_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
|
|
printk(KERN_NOTICE "%s: SMC91c92 transmit timed out, "
|
|
"Tx_status %2.2x status %4.4x.\n",
|
|
dev->name, inw(ioaddr)&0xff, inw(ioaddr + 2));
|
|
dev->stats.tx_errors++;
|
|
smc_reset(dev);
|
|
dev->trans_start = jiffies; /* prevent tx timeout */
|
|
smc->saved_skb = NULL;
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
|
|
struct net_device *dev)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
u_short num_pages;
|
|
short time_out, ir;
|
|
unsigned long flags;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
pr_debug("%s: smc_start_xmit(length = %d) called,"
|
|
" status %4.4x.\n", dev->name, skb->len, inw(ioaddr + 2));
|
|
|
|
if (smc->saved_skb) {
|
|
/* THIS SHOULD NEVER HAPPEN. */
|
|
dev->stats.tx_aborted_errors++;
|
|
printk(KERN_DEBUG "%s: Internal error -- sent packet while busy.\n",
|
|
dev->name);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
smc->saved_skb = skb;
|
|
|
|
num_pages = skb->len >> 8;
|
|
|
|
if (num_pages > 7) {
|
|
printk(KERN_ERR "%s: Far too big packet error.\n", dev->name);
|
|
dev_kfree_skb (skb);
|
|
smc->saved_skb = NULL;
|
|
dev->stats.tx_dropped++;
|
|
return NETDEV_TX_OK; /* Do not re-queue this packet. */
|
|
}
|
|
/* A packet is now waiting. */
|
|
smc->packets_waiting++;
|
|
|
|
spin_lock_irqsave(&smc->lock, flags);
|
|
SMC_SELECT_BANK(2); /* Paranoia, we should always be in window 2 */
|
|
|
|
/* need MC_RESET to keep the memory consistent. errata? */
|
|
if (smc->rx_ovrn) {
|
|
outw(MC_RESET, ioaddr + MMU_CMD);
|
|
smc->rx_ovrn = 0;
|
|
}
|
|
|
|
/* Allocate the memory; send the packet now if we win. */
|
|
outw(MC_ALLOC | num_pages, ioaddr + MMU_CMD);
|
|
for (time_out = MEMORY_WAIT_TIME; time_out >= 0; time_out--) {
|
|
ir = inw(ioaddr+INTERRUPT);
|
|
if (ir & IM_ALLOC_INT) {
|
|
/* Acknowledge the interrupt, send the packet. */
|
|
outw((ir&0xff00) | IM_ALLOC_INT, ioaddr + INTERRUPT);
|
|
smc_hardware_send_packet(dev); /* Send the packet now.. */
|
|
spin_unlock_irqrestore(&smc->lock, flags);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
}
|
|
|
|
/* Otherwise defer until the Tx-space-allocated interrupt. */
|
|
pr_debug("%s: memory allocation deferred.\n", dev->name);
|
|
outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT);
|
|
spin_unlock_irqrestore(&smc->lock, flags);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
Handle a Tx anomolous event. Entered while in Window 2.
|
|
|
|
======================================================================*/
|
|
|
|
static void smc_tx_err(struct net_device * dev)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
int saved_packet = inw(ioaddr + PNR_ARR) & 0xff;
|
|
int packet_no = inw(ioaddr + FIFO_PORTS) & 0x7f;
|
|
int tx_status;
|
|
|
|
/* select this as the packet to read from */
|
|
outw(packet_no, ioaddr + PNR_ARR);
|
|
|
|
/* read the first word from this packet */
|
|
outw(PTR_AUTOINC | PTR_READ | 0, ioaddr + POINTER);
|
|
|
|
tx_status = inw(ioaddr + DATA_1);
|
|
|
|
dev->stats.tx_errors++;
|
|
if (tx_status & TS_LOSTCAR) dev->stats.tx_carrier_errors++;
|
|
if (tx_status & TS_LATCOL) dev->stats.tx_window_errors++;
|
|
if (tx_status & TS_16COL) {
|
|
dev->stats.tx_aborted_errors++;
|
|
smc->tx_err++;
|
|
}
|
|
|
|
if (tx_status & TS_SUCCESS) {
|
|
printk(KERN_NOTICE "%s: Successful packet caused error "
|
|
"interrupt?\n", dev->name);
|
|
}
|
|
/* re-enable transmit */
|
|
SMC_SELECT_BANK(0);
|
|
outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);
|
|
SMC_SELECT_BANK(2);
|
|
|
|
outw(MC_FREEPKT, ioaddr + MMU_CMD); /* Free the packet memory. */
|
|
|
|
/* one less packet waiting for me */
|
|
smc->packets_waiting--;
|
|
|
|
outw(saved_packet, ioaddr + PNR_ARR);
|
|
}
|
|
|
|
/*====================================================================*/
|
|
|
|
static void smc_eph_irq(struct net_device *dev)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
u_short card_stats, ephs;
|
|
|
|
SMC_SELECT_BANK(0);
|
|
ephs = inw(ioaddr + EPH);
|
|
pr_debug("%s: Ethernet protocol handler interrupt, status"
|
|
" %4.4x.\n", dev->name, ephs);
|
|
/* Could be a counter roll-over warning: update stats. */
|
|
card_stats = inw(ioaddr + COUNTER);
|
|
/* single collisions */
|
|
dev->stats.collisions += card_stats & 0xF;
|
|
card_stats >>= 4;
|
|
/* multiple collisions */
|
|
dev->stats.collisions += card_stats & 0xF;
|
|
#if 0 /* These are for when linux supports these statistics */
|
|
card_stats >>= 4; /* deferred */
|
|
card_stats >>= 4; /* excess deferred */
|
|
#endif
|
|
/* If we had a transmit error we must re-enable the transmitter. */
|
|
outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR);
|
|
|
|
/* Clear a link error interrupt. */
|
|
SMC_SELECT_BANK(1);
|
|
outw(CTL_AUTO_RELEASE | 0x0000, ioaddr + CONTROL);
|
|
outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
|
|
ioaddr + CONTROL);
|
|
SMC_SELECT_BANK(2);
|
|
}
|
|
|
|
/*====================================================================*/
|
|
|
|
static irqreturn_t smc_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
unsigned int ioaddr;
|
|
u_short saved_bank, saved_pointer, mask, status;
|
|
unsigned int handled = 1;
|
|
char bogus_cnt = INTR_WORK; /* Work we are willing to do. */
|
|
|
|
if (!netif_device_present(dev))
|
|
return IRQ_NONE;
|
|
|
|
ioaddr = dev->base_addr;
|
|
|
|
pr_debug("%s: SMC91c92 interrupt %d at %#x.\n", dev->name,
|
|
irq, ioaddr);
|
|
|
|
spin_lock(&smc->lock);
|
|
smc->watchdog = 0;
|
|
saved_bank = inw(ioaddr + BANK_SELECT);
|
|
if ((saved_bank & 0xff00) != 0x3300) {
|
|
/* The device does not exist -- the card could be off-line, or
|
|
maybe it has been ejected. */
|
|
pr_debug("%s: SMC91c92 interrupt %d for non-existent"
|
|
"/ejected device.\n", dev->name, irq);
|
|
handled = 0;
|
|
goto irq_done;
|
|
}
|
|
|
|
SMC_SELECT_BANK(2);
|
|
saved_pointer = inw(ioaddr + POINTER);
|
|
mask = inw(ioaddr + INTERRUPT) >> 8;
|
|
/* clear all interrupts */
|
|
outw(0, ioaddr + INTERRUPT);
|
|
|
|
do { /* read the status flag, and mask it */
|
|
status = inw(ioaddr + INTERRUPT) & 0xff;
|
|
pr_debug("%s: Status is %#2.2x (mask %#2.2x).\n", dev->name,
|
|
status, mask);
|
|
if ((status & mask) == 0) {
|
|
if (bogus_cnt == INTR_WORK)
|
|
handled = 0;
|
|
break;
|
|
}
|
|
if (status & IM_RCV_INT) {
|
|
/* Got a packet(s). */
|
|
smc_rx(dev);
|
|
}
|
|
if (status & IM_TX_INT) {
|
|
smc_tx_err(dev);
|
|
outw(IM_TX_INT, ioaddr + INTERRUPT);
|
|
}
|
|
status &= mask;
|
|
if (status & IM_TX_EMPTY_INT) {
|
|
outw(IM_TX_EMPTY_INT, ioaddr + INTERRUPT);
|
|
mask &= ~IM_TX_EMPTY_INT;
|
|
dev->stats.tx_packets += smc->packets_waiting;
|
|
smc->packets_waiting = 0;
|
|
}
|
|
if (status & IM_ALLOC_INT) {
|
|
/* Clear this interrupt so it doesn't happen again */
|
|
mask &= ~IM_ALLOC_INT;
|
|
|
|
smc_hardware_send_packet(dev);
|
|
|
|
/* enable xmit interrupts based on this */
|
|
mask |= (IM_TX_EMPTY_INT | IM_TX_INT);
|
|
|
|
/* and let the card send more packets to me */
|
|
netif_wake_queue(dev);
|
|
}
|
|
if (status & IM_RX_OVRN_INT) {
|
|
dev->stats.rx_errors++;
|
|
dev->stats.rx_fifo_errors++;
|
|
if (smc->duplex)
|
|
smc->rx_ovrn = 1; /* need MC_RESET outside smc_interrupt */
|
|
outw(IM_RX_OVRN_INT, ioaddr + INTERRUPT);
|
|
}
|
|
if (status & IM_EPH_INT)
|
|
smc_eph_irq(dev);
|
|
} while (--bogus_cnt);
|
|
|
|
pr_debug(" Restoring saved registers mask %2.2x bank %4.4x"
|
|
" pointer %4.4x.\n", mask, saved_bank, saved_pointer);
|
|
|
|
/* restore state register */
|
|
outw((mask<<8), ioaddr + INTERRUPT);
|
|
outw(saved_pointer, ioaddr + POINTER);
|
|
SMC_SELECT_BANK(saved_bank);
|
|
|
|
pr_debug("%s: Exiting interrupt IRQ%d.\n", dev->name, irq);
|
|
|
|
irq_done:
|
|
|
|
if ((smc->manfid == MANFID_OSITECH) &&
|
|
(smc->cardid != PRODID_OSITECH_SEVEN)) {
|
|
/* Retrigger interrupt if needed */
|
|
mask_bits(0x00ff, ioaddr-0x10+OSITECH_RESET_ISR);
|
|
set_bits(0x0300, ioaddr-0x10+OSITECH_RESET_ISR);
|
|
}
|
|
if (smc->manfid == MANFID_MOTOROLA) {
|
|
u_char cor;
|
|
cor = readb(smc->base + MOT_UART + CISREG_COR);
|
|
writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_UART + CISREG_COR);
|
|
writeb(cor, smc->base + MOT_UART + CISREG_COR);
|
|
cor = readb(smc->base + MOT_LAN + CISREG_COR);
|
|
writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR);
|
|
writeb(cor, smc->base + MOT_LAN + CISREG_COR);
|
|
}
|
|
|
|
if ((smc->base != NULL) && /* Megahertz MFC's */
|
|
(smc->manfid == MANFID_MEGAHERTZ) &&
|
|
(smc->cardid == PRODID_MEGAHERTZ_EM3288)) {
|
|
|
|
u_char tmp;
|
|
tmp = readb(smc->base+MEGAHERTZ_ISR);
|
|
tmp = readb(smc->base+MEGAHERTZ_ISR);
|
|
|
|
/* Retrigger interrupt if needed */
|
|
writeb(tmp, smc->base + MEGAHERTZ_ISR);
|
|
writeb(tmp, smc->base + MEGAHERTZ_ISR);
|
|
}
|
|
|
|
spin_unlock(&smc->lock);
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/*====================================================================*/
|
|
|
|
static void smc_rx(struct net_device *dev)
|
|
{
|
|
unsigned int ioaddr = dev->base_addr;
|
|
int rx_status;
|
|
int packet_length; /* Caution: not frame length, rather words
|
|
to transfer from the chip. */
|
|
|
|
/* Assertion: we are in Window 2. */
|
|
|
|
if (inw(ioaddr + FIFO_PORTS) & FP_RXEMPTY) {
|
|
printk(KERN_ERR "%s: smc_rx() with nothing on Rx FIFO.\n",
|
|
dev->name);
|
|
return;
|
|
}
|
|
|
|
/* Reset the read pointer, and read the status and packet length. */
|
|
outw(PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER);
|
|
rx_status = inw(ioaddr + DATA_1);
|
|
packet_length = inw(ioaddr + DATA_1) & 0x07ff;
|
|
|
|
pr_debug("%s: Receive status %4.4x length %d.\n",
|
|
dev->name, rx_status, packet_length);
|
|
|
|
if (!(rx_status & RS_ERRORS)) {
|
|
/* do stuff to make a new packet */
|
|
struct sk_buff *skb;
|
|
|
|
/* Note: packet_length adds 5 or 6 extra bytes here! */
|
|
skb = dev_alloc_skb(packet_length+2);
|
|
|
|
if (skb == NULL) {
|
|
pr_debug("%s: Low memory, packet dropped.\n", dev->name);
|
|
dev->stats.rx_dropped++;
|
|
outw(MC_RELEASE, ioaddr + MMU_CMD);
|
|
return;
|
|
}
|
|
|
|
packet_length -= (rx_status & RS_ODDFRAME ? 5 : 6);
|
|
skb_reserve(skb, 2);
|
|
insw(ioaddr+DATA_1, skb_put(skb, packet_length),
|
|
(packet_length+1)>>1);
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
netif_rx(skb);
|
|
dev->last_rx = jiffies;
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += packet_length;
|
|
if (rx_status & RS_MULTICAST)
|
|
dev->stats.multicast++;
|
|
} else {
|
|
/* error ... */
|
|
dev->stats.rx_errors++;
|
|
|
|
if (rx_status & RS_ALGNERR) dev->stats.rx_frame_errors++;
|
|
if (rx_status & (RS_TOOSHORT | RS_TOOLONG))
|
|
dev->stats.rx_length_errors++;
|
|
if (rx_status & RS_BADCRC) dev->stats.rx_crc_errors++;
|
|
}
|
|
/* Let the MMU free the memory of this packet. */
|
|
outw(MC_RELEASE, ioaddr + MMU_CMD);
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
Set the receive mode.
|
|
|
|
This routine is used by both the protocol level to notify us of
|
|
promiscuous/multicast mode changes, and by the open/reset code to
|
|
initialize the Rx registers. We always set the multicast list and
|
|
leave the receiver running.
|
|
|
|
======================================================================*/
|
|
|
|
static void set_rx_mode(struct net_device *dev)
|
|
{
|
|
unsigned int ioaddr = dev->base_addr;
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
unsigned char multicast_table[8];
|
|
unsigned long flags;
|
|
u_short rx_cfg_setting;
|
|
int i;
|
|
|
|
memset(multicast_table, 0, sizeof(multicast_table));
|
|
|
|
if (dev->flags & IFF_PROMISC) {
|
|
rx_cfg_setting = RxStripCRC | RxEnable | RxPromisc | RxAllMulti;
|
|
} else if (dev->flags & IFF_ALLMULTI)
|
|
rx_cfg_setting = RxStripCRC | RxEnable | RxAllMulti;
|
|
else {
|
|
if (!netdev_mc_empty(dev)) {
|
|
struct netdev_hw_addr *ha;
|
|
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
u_int position = ether_crc(6, ha->addr);
|
|
multicast_table[position >> 29] |= 1 << ((position >> 26) & 7);
|
|
}
|
|
}
|
|
rx_cfg_setting = RxStripCRC | RxEnable;
|
|
}
|
|
|
|
/* Load MC table and Rx setting into the chip without interrupts. */
|
|
spin_lock_irqsave(&smc->lock, flags);
|
|
SMC_SELECT_BANK(3);
|
|
for (i = 0; i < 8; i++)
|
|
outb(multicast_table[i], ioaddr + MULTICAST0 + i);
|
|
SMC_SELECT_BANK(0);
|
|
outw(rx_cfg_setting, ioaddr + RCR);
|
|
SMC_SELECT_BANK(2);
|
|
spin_unlock_irqrestore(&smc->lock, flags);
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
Senses when a card's config changes. Here, it's coax or TP.
|
|
|
|
======================================================================*/
|
|
|
|
static int s9k_config(struct net_device *dev, struct ifmap *map)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
|
|
if (smc->cfg & CFG_MII_SELECT)
|
|
return -EOPNOTSUPP;
|
|
else if (map->port > 2)
|
|
return -EINVAL;
|
|
dev->if_port = map->port;
|
|
printk(KERN_INFO "%s: switched to %s port\n",
|
|
dev->name, if_names[dev->if_port]);
|
|
smc_reset(dev);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
Reset the chip, reloading every register that might be corrupted.
|
|
|
|
======================================================================*/
|
|
|
|
/*
|
|
Set transceiver type, perhaps to something other than what the user
|
|
specified in dev->if_port.
|
|
*/
|
|
static void smc_set_xcvr(struct net_device *dev, int if_port)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
u_short saved_bank;
|
|
|
|
saved_bank = inw(ioaddr + BANK_SELECT);
|
|
SMC_SELECT_BANK(1);
|
|
if (if_port == 2) {
|
|
outw(smc->cfg | CFG_AUI_SELECT, ioaddr + CONFIG);
|
|
if ((smc->manfid == MANFID_OSITECH) &&
|
|
(smc->cardid != PRODID_OSITECH_SEVEN))
|
|
set_bits(OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
|
|
smc->media_status = ((dev->if_port == 0) ? 0x0001 : 0x0002);
|
|
} else {
|
|
outw(smc->cfg, ioaddr + CONFIG);
|
|
if ((smc->manfid == MANFID_OSITECH) &&
|
|
(smc->cardid != PRODID_OSITECH_SEVEN))
|
|
mask_bits(~OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR);
|
|
smc->media_status = ((dev->if_port == 0) ? 0x0012 : 0x4001);
|
|
}
|
|
SMC_SELECT_BANK(saved_bank);
|
|
}
|
|
|
|
static void smc_reset(struct net_device *dev)
|
|
{
|
|
unsigned int ioaddr = dev->base_addr;
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
int i;
|
|
|
|
pr_debug("%s: smc91c92 reset called.\n", dev->name);
|
|
|
|
/* The first interaction must be a write to bring the chip out
|
|
of sleep mode. */
|
|
SMC_SELECT_BANK(0);
|
|
/* Reset the chip. */
|
|
outw(RCR_SOFTRESET, ioaddr + RCR);
|
|
udelay(10);
|
|
|
|
/* Clear the transmit and receive configuration registers. */
|
|
outw(RCR_CLEAR, ioaddr + RCR);
|
|
outw(TCR_CLEAR, ioaddr + TCR);
|
|
|
|
/* Set the Window 1 control, configuration and station addr registers.
|
|
No point in writing the I/O base register ;-> */
|
|
SMC_SELECT_BANK(1);
|
|
/* Automatically release successfully transmitted packets,
|
|
Accept link errors, counter and Tx error interrupts. */
|
|
outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE,
|
|
ioaddr + CONTROL);
|
|
smc_set_xcvr(dev, dev->if_port);
|
|
if ((smc->manfid == MANFID_OSITECH) &&
|
|
(smc->cardid != PRODID_OSITECH_SEVEN))
|
|
outw((dev->if_port == 2 ? OSI_AUI_PWR : 0) |
|
|
(inw(ioaddr-0x10+OSITECH_AUI_PWR) & 0xff00),
|
|
ioaddr - 0x10 + OSITECH_AUI_PWR);
|
|
|
|
/* Fill in the physical address. The databook is wrong about the order! */
|
|
for (i = 0; i < 6; i += 2)
|
|
outw((dev->dev_addr[i+1]<<8)+dev->dev_addr[i],
|
|
ioaddr + ADDR0 + i);
|
|
|
|
/* Reset the MMU */
|
|
SMC_SELECT_BANK(2);
|
|
outw(MC_RESET, ioaddr + MMU_CMD);
|
|
outw(0, ioaddr + INTERRUPT);
|
|
|
|
/* Re-enable the chip. */
|
|
SMC_SELECT_BANK(0);
|
|
outw(((smc->cfg & CFG_MII_SELECT) ? 0 : TCR_MONCSN) |
|
|
TCR_ENABLE | TCR_PAD_EN | smc->duplex, ioaddr + TCR);
|
|
set_rx_mode(dev);
|
|
|
|
if (smc->cfg & CFG_MII_SELECT) {
|
|
SMC_SELECT_BANK(3);
|
|
|
|
/* Reset MII */
|
|
mdio_write(dev, smc->mii_if.phy_id, 0, 0x8000);
|
|
|
|
/* Advertise 100F, 100H, 10F, 10H */
|
|
mdio_write(dev, smc->mii_if.phy_id, 4, 0x01e1);
|
|
|
|
/* Restart MII autonegotiation */
|
|
mdio_write(dev, smc->mii_if.phy_id, 0, 0x0000);
|
|
mdio_write(dev, smc->mii_if.phy_id, 0, 0x1200);
|
|
}
|
|
|
|
/* Enable interrupts. */
|
|
SMC_SELECT_BANK(2);
|
|
outw((IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT) << 8,
|
|
ioaddr + INTERRUPT);
|
|
}
|
|
|
|
/*======================================================================
|
|
|
|
Media selection timer routine
|
|
|
|
======================================================================*/
|
|
|
|
static void media_check(u_long arg)
|
|
{
|
|
struct net_device *dev = (struct net_device *) arg;
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
u_short i, media, saved_bank;
|
|
u_short link;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&smc->lock, flags);
|
|
|
|
saved_bank = inw(ioaddr + BANK_SELECT);
|
|
|
|
if (!netif_device_present(dev))
|
|
goto reschedule;
|
|
|
|
SMC_SELECT_BANK(2);
|
|
|
|
/* need MC_RESET to keep the memory consistent. errata? */
|
|
if (smc->rx_ovrn) {
|
|
outw(MC_RESET, ioaddr + MMU_CMD);
|
|
smc->rx_ovrn = 0;
|
|
}
|
|
i = inw(ioaddr + INTERRUPT);
|
|
SMC_SELECT_BANK(0);
|
|
media = inw(ioaddr + EPH) & EPH_LINK_OK;
|
|
SMC_SELECT_BANK(1);
|
|
media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1;
|
|
|
|
SMC_SELECT_BANK(saved_bank);
|
|
spin_unlock_irqrestore(&smc->lock, flags);
|
|
|
|
/* Check for pending interrupt with watchdog flag set: with
|
|
this, we can limp along even if the interrupt is blocked */
|
|
if (smc->watchdog++ && ((i>>8) & i)) {
|
|
if (!smc->fast_poll)
|
|
printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
|
|
local_irq_save(flags);
|
|
smc_interrupt(dev->irq, dev);
|
|
local_irq_restore(flags);
|
|
smc->fast_poll = HZ;
|
|
}
|
|
if (smc->fast_poll) {
|
|
smc->fast_poll--;
|
|
smc->media.expires = jiffies + HZ/100;
|
|
add_timer(&smc->media);
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&smc->lock, flags);
|
|
|
|
saved_bank = inw(ioaddr + BANK_SELECT);
|
|
|
|
if (smc->cfg & CFG_MII_SELECT) {
|
|
if (smc->mii_if.phy_id < 0)
|
|
goto reschedule;
|
|
|
|
SMC_SELECT_BANK(3);
|
|
link = mdio_read(dev, smc->mii_if.phy_id, 1);
|
|
if (!link || (link == 0xffff)) {
|
|
printk(KERN_INFO "%s: MII is missing!\n", dev->name);
|
|
smc->mii_if.phy_id = -1;
|
|
goto reschedule;
|
|
}
|
|
|
|
link &= 0x0004;
|
|
if (link != smc->link_status) {
|
|
u_short p = mdio_read(dev, smc->mii_if.phy_id, 5);
|
|
printk(KERN_INFO "%s: %s link beat\n", dev->name,
|
|
(link) ? "found" : "lost");
|
|
smc->duplex = (((p & 0x0100) || ((p & 0x1c0) == 0x40))
|
|
? TCR_FDUPLX : 0);
|
|
if (link) {
|
|
printk(KERN_INFO "%s: autonegotiation complete: "
|
|
"%sbaseT-%cD selected\n", dev->name,
|
|
((p & 0x0180) ? "100" : "10"),
|
|
(smc->duplex ? 'F' : 'H'));
|
|
}
|
|
SMC_SELECT_BANK(0);
|
|
outw(inw(ioaddr + TCR) | smc->duplex, ioaddr + TCR);
|
|
smc->link_status = link;
|
|
}
|
|
goto reschedule;
|
|
}
|
|
|
|
/* Ignore collisions unless we've had no rx's recently */
|
|
if (time_after(jiffies, dev->last_rx + HZ)) {
|
|
if (smc->tx_err || (smc->media_status & EPH_16COL))
|
|
media |= EPH_16COL;
|
|
}
|
|
smc->tx_err = 0;
|
|
|
|
if (media != smc->media_status) {
|
|
if ((media & smc->media_status & 1) &&
|
|
((smc->media_status ^ media) & EPH_LINK_OK))
|
|
printk(KERN_INFO "%s: %s link beat\n", dev->name,
|
|
(smc->media_status & EPH_LINK_OK ? "lost" : "found"));
|
|
else if ((media & smc->media_status & 2) &&
|
|
((smc->media_status ^ media) & EPH_16COL))
|
|
printk(KERN_INFO "%s: coax cable %s\n", dev->name,
|
|
(media & EPH_16COL ? "problem" : "ok"));
|
|
if (dev->if_port == 0) {
|
|
if (media & 1) {
|
|
if (media & EPH_LINK_OK)
|
|
printk(KERN_INFO "%s: flipped to 10baseT\n",
|
|
dev->name);
|
|
else
|
|
smc_set_xcvr(dev, 2);
|
|
} else {
|
|
if (media & EPH_16COL)
|
|
smc_set_xcvr(dev, 1);
|
|
else
|
|
printk(KERN_INFO "%s: flipped to 10base2\n",
|
|
dev->name);
|
|
}
|
|
}
|
|
smc->media_status = media;
|
|
}
|
|
|
|
reschedule:
|
|
smc->media.expires = jiffies + HZ;
|
|
add_timer(&smc->media);
|
|
SMC_SELECT_BANK(saved_bank);
|
|
spin_unlock_irqrestore(&smc->lock, flags);
|
|
}
|
|
|
|
static int smc_link_ok(struct net_device *dev)
|
|
{
|
|
unsigned int ioaddr = dev->base_addr;
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
|
|
if (smc->cfg & CFG_MII_SELECT) {
|
|
return mii_link_ok(&smc->mii_if);
|
|
} else {
|
|
SMC_SELECT_BANK(0);
|
|
return inw(ioaddr + EPH) & EPH_LINK_OK;
|
|
}
|
|
}
|
|
|
|
static int smc_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
|
|
{
|
|
u16 tmp;
|
|
unsigned int ioaddr = dev->base_addr;
|
|
|
|
ecmd->supported = (SUPPORTED_TP | SUPPORTED_AUI |
|
|
SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full);
|
|
|
|
SMC_SELECT_BANK(1);
|
|
tmp = inw(ioaddr + CONFIG);
|
|
ecmd->port = (tmp & CFG_AUI_SELECT) ? PORT_AUI : PORT_TP;
|
|
ecmd->transceiver = XCVR_INTERNAL;
|
|
ecmd->speed = SPEED_10;
|
|
ecmd->phy_address = ioaddr + MGMT;
|
|
|
|
SMC_SELECT_BANK(0);
|
|
tmp = inw(ioaddr + TCR);
|
|
ecmd->duplex = (tmp & TCR_FDUPLX) ? DUPLEX_FULL : DUPLEX_HALF;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smc_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
|
|
{
|
|
u16 tmp;
|
|
unsigned int ioaddr = dev->base_addr;
|
|
|
|
if (ecmd->speed != SPEED_10)
|
|
return -EINVAL;
|
|
if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
|
|
return -EINVAL;
|
|
if (ecmd->port != PORT_TP && ecmd->port != PORT_AUI)
|
|
return -EINVAL;
|
|
if (ecmd->transceiver != XCVR_INTERNAL)
|
|
return -EINVAL;
|
|
|
|
if (ecmd->port == PORT_AUI)
|
|
smc_set_xcvr(dev, 1);
|
|
else
|
|
smc_set_xcvr(dev, 0);
|
|
|
|
SMC_SELECT_BANK(0);
|
|
tmp = inw(ioaddr + TCR);
|
|
if (ecmd->duplex == DUPLEX_FULL)
|
|
tmp |= TCR_FDUPLX;
|
|
else
|
|
tmp &= ~TCR_FDUPLX;
|
|
outw(tmp, ioaddr + TCR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int check_if_running(struct net_device *dev)
|
|
{
|
|
if (!netif_running(dev))
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
static void smc_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
strcpy(info->driver, DRV_NAME);
|
|
strcpy(info->version, DRV_VERSION);
|
|
}
|
|
|
|
static int smc_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
u16 saved_bank = inw(ioaddr + BANK_SELECT);
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&smc->lock, flags);
|
|
SMC_SELECT_BANK(3);
|
|
if (smc->cfg & CFG_MII_SELECT)
|
|
ret = mii_ethtool_gset(&smc->mii_if, ecmd);
|
|
else
|
|
ret = smc_netdev_get_ecmd(dev, ecmd);
|
|
SMC_SELECT_BANK(saved_bank);
|
|
spin_unlock_irqrestore(&smc->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static int smc_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
u16 saved_bank = inw(ioaddr + BANK_SELECT);
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&smc->lock, flags);
|
|
SMC_SELECT_BANK(3);
|
|
if (smc->cfg & CFG_MII_SELECT)
|
|
ret = mii_ethtool_sset(&smc->mii_if, ecmd);
|
|
else
|
|
ret = smc_netdev_set_ecmd(dev, ecmd);
|
|
SMC_SELECT_BANK(saved_bank);
|
|
spin_unlock_irqrestore(&smc->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static u32 smc_get_link(struct net_device *dev)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
u16 saved_bank = inw(ioaddr + BANK_SELECT);
|
|
u32 ret;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&smc->lock, flags);
|
|
SMC_SELECT_BANK(3);
|
|
ret = smc_link_ok(dev);
|
|
SMC_SELECT_BANK(saved_bank);
|
|
spin_unlock_irqrestore(&smc->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static int smc_nway_reset(struct net_device *dev)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
if (smc->cfg & CFG_MII_SELECT) {
|
|
unsigned int ioaddr = dev->base_addr;
|
|
u16 saved_bank = inw(ioaddr + BANK_SELECT);
|
|
int res;
|
|
|
|
SMC_SELECT_BANK(3);
|
|
res = mii_nway_restart(&smc->mii_if);
|
|
SMC_SELECT_BANK(saved_bank);
|
|
|
|
return res;
|
|
} else
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static const struct ethtool_ops ethtool_ops = {
|
|
.begin = check_if_running,
|
|
.get_drvinfo = smc_get_drvinfo,
|
|
.get_settings = smc_get_settings,
|
|
.set_settings = smc_set_settings,
|
|
.get_link = smc_get_link,
|
|
.nway_reset = smc_nway_reset,
|
|
};
|
|
|
|
static int smc_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct smc_private *smc = netdev_priv(dev);
|
|
struct mii_ioctl_data *mii = if_mii(rq);
|
|
int rc = 0;
|
|
u16 saved_bank;
|
|
unsigned int ioaddr = dev->base_addr;
|
|
unsigned long flags;
|
|
|
|
if (!netif_running(dev))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&smc->lock, flags);
|
|
saved_bank = inw(ioaddr + BANK_SELECT);
|
|
SMC_SELECT_BANK(3);
|
|
rc = generic_mii_ioctl(&smc->mii_if, mii, cmd, NULL);
|
|
SMC_SELECT_BANK(saved_bank);
|
|
spin_unlock_irqrestore(&smc->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
static struct pcmcia_device_id smc91c92_ids[] = {
|
|
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0109, 0x0501),
|
|
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0140, 0x000a),
|
|
PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
|
|
PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
|
|
PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
|
|
PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
|
|
PCMCIA_PFC_DEVICE_PROD_ID12(0, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
|
|
PCMCIA_PFC_DEVICE_PROD_ID12(0, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
|
|
PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
|
|
PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
|
|
PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x016c, 0x0020),
|
|
PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0023),
|
|
PCMCIA_DEVICE_PROD_ID123("BASICS by New Media Corporation", "Ethernet", "SMC91C94", 0x23c78a9d, 0x00b2e941, 0xcef397fb),
|
|
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "Fast Ethernet PCCard", 0x78f308dc, 0xdcea68bc),
|
|
PCMCIA_DEVICE_PROD_ID12("dit Co., Ltd.", "PC Card-10/100BTX", 0xe59365c8, 0x6a2161d1),
|
|
PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L100C", 0x6a26d1cf, 0xc16ce9c5),
|
|
PCMCIA_DEVICE_PROD_ID12("Farallon", "Farallon Enet", 0x58d93fc4, 0x244734e9),
|
|
PCMCIA_DEVICE_PROD_ID12("Megahertz", "CC10BT/2", 0x33234748, 0x3c95b953),
|
|
PCMCIA_DEVICE_PROD_ID12("MELCO/SMC", "LPC-TX", 0xa2cd8e6d, 0x42da662a),
|
|
PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Four of Diamonds Ethernet", 0xc2f80cd, 0xb3466314),
|
|
PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Seven of Diamonds Ethernet", 0xc2f80cd, 0x194b650a),
|
|
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast Ethernet PCCard", 0x281f1c5d, 0xdcea68bc),
|
|
PCMCIA_DEVICE_PROD_ID12("Psion", "10Mb Ethernet", 0x4ef00b21, 0x844be9e9),
|
|
PCMCIA_DEVICE_PROD_ID12("SMC", "EtherEZ Ethernet 8020", 0xc4f8b18b, 0x4a0eeb2d),
|
|
/* These conflict with other cards! */
|
|
/* PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0100), */
|
|
/* PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab), */
|
|
PCMCIA_DEVICE_NULL,
|
|
};
|
|
MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids);
|
|
|
|
static struct pcmcia_driver smc91c92_cs_driver = {
|
|
.owner = THIS_MODULE,
|
|
.drv = {
|
|
.name = "smc91c92_cs",
|
|
},
|
|
.probe = smc91c92_probe,
|
|
.remove = smc91c92_detach,
|
|
.id_table = smc91c92_ids,
|
|
.suspend = smc91c92_suspend,
|
|
.resume = smc91c92_resume,
|
|
};
|
|
|
|
static int __init init_smc91c92_cs(void)
|
|
{
|
|
return pcmcia_register_driver(&smc91c92_cs_driver);
|
|
}
|
|
|
|
static void __exit exit_smc91c92_cs(void)
|
|
{
|
|
pcmcia_unregister_driver(&smc91c92_cs_driver);
|
|
}
|
|
|
|
module_init(init_smc91c92_cs);
|
|
module_exit(exit_smc91c92_cs);
|