![Dominik Brodowski](/assets/img/avatar_default.png)
Page already had to be set to 0; Offset can easily be passed as parameter to pcmcia_map_mem_page. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
1879 lines
54 KiB
C
1879 lines
54 KiB
C
/* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03)
|
|
* Xircom CreditCard Ethernet Adapter IIps driver
|
|
* Xircom Realport 10/100 (RE-100) driver
|
|
*
|
|
* This driver supports various Xircom CreditCard Ethernet adapters
|
|
* including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56,
|
|
* CE3-100, CE3B, RE-100, REM10BT, and REM56G-100.
|
|
*
|
|
* 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not
|
|
* autodetect the media properly. In this case use the
|
|
* if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options
|
|
* to force the media type.
|
|
*
|
|
* Written originally by Werner Koch based on David Hinds' skeleton of the
|
|
* PCMCIA driver.
|
|
*
|
|
* Copyright (c) 1997,1998 Werner Koch (dd9jn)
|
|
*
|
|
* This driver is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* It is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
|
|
*
|
|
*
|
|
* ALTERNATIVELY, this driver may be distributed under the terms of
|
|
* the following license, in which case the provisions of this license
|
|
* are required INSTEAD OF the GNU General Public License. (This clause
|
|
* is necessary due to a potential bad interaction between the GPL and
|
|
* the restrictions contained in a BSD-style copyright.)
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, and the entire permission notice in its entirety,
|
|
* including the disclaimer of warranties.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote
|
|
* products derived from this software without specific prior
|
|
* written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/in.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/mii.h>
|
|
|
|
#include <pcmcia/cs.h>
|
|
#include <pcmcia/cistpl.h>
|
|
#include <pcmcia/cisreg.h>
|
|
#include <pcmcia/ciscode.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#ifndef MANFID_COMPAQ
|
|
#define MANFID_COMPAQ 0x0138
|
|
#define MANFID_COMPAQ2 0x0183 /* is this correct? */
|
|
#endif
|
|
|
|
#include <pcmcia/ds.h>
|
|
|
|
/* Time in jiffies before concluding Tx hung */
|
|
#define TX_TIMEOUT ((400*HZ)/1000)
|
|
|
|
/****************
|
|
* Some constants used to access the hardware
|
|
*/
|
|
|
|
/* Register offsets and value constans */
|
|
#define XIRCREG_CR 0 /* Command register (wr) */
|
|
enum xirc_cr {
|
|
TransmitPacket = 0x01,
|
|
SoftReset = 0x02,
|
|
EnableIntr = 0x04,
|
|
ForceIntr = 0x08,
|
|
ClearTxFIFO = 0x10,
|
|
ClearRxOvrun = 0x20,
|
|
RestartTx = 0x40
|
|
};
|
|
#define XIRCREG_ESR 0 /* Ethernet status register (rd) */
|
|
enum xirc_esr {
|
|
FullPktRcvd = 0x01, /* full packet in receive buffer */
|
|
PktRejected = 0x04, /* a packet has been rejected */
|
|
TxPktPend = 0x08, /* TX Packet Pending */
|
|
IncorPolarity = 0x10,
|
|
MediaSelect = 0x20 /* set if TP, clear if AUI */
|
|
};
|
|
#define XIRCREG_PR 1 /* Page Register select */
|
|
#define XIRCREG_EDP 4 /* Ethernet Data Port Register */
|
|
#define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */
|
|
enum xirc_isr {
|
|
TxBufOvr = 0x01, /* TX Buffer Overflow */
|
|
PktTxed = 0x02, /* Packet Transmitted */
|
|
MACIntr = 0x04, /* MAC Interrupt occurred */
|
|
TxResGrant = 0x08, /* Tx Reservation Granted */
|
|
RxFullPkt = 0x20, /* Rx Full Packet */
|
|
RxPktRej = 0x40, /* Rx Packet Rejected */
|
|
ForcedIntr= 0x80 /* Forced Interrupt */
|
|
};
|
|
#define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/
|
|
#define XIRCREG1_IMR1 13
|
|
#define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/
|
|
#define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/
|
|
#define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */
|
|
#define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */
|
|
enum xirc_rsr {
|
|
PhyPkt = 0x01, /* set:physical packet, clear: multicast packet */
|
|
BrdcstPkt = 0x02, /* set if it is a broadcast packet */
|
|
PktTooLong = 0x04, /* set if packet length > 1518 */
|
|
AlignErr = 0x10, /* incorrect CRC and last octet not complete */
|
|
CRCErr = 0x20, /* incorrect CRC and last octet is complete */
|
|
PktRxOk = 0x80 /* received ok */
|
|
};
|
|
#define XIRCREG0_PTR 13 /* packets transmitted register (rd) */
|
|
#define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */
|
|
#define XIRCREG1_ECR 14 /* ethernet configurationn register */
|
|
enum xirc_ecr {
|
|
FullDuplex = 0x04, /* enable full duplex mode */
|
|
LongTPMode = 0x08, /* adjust for longer lengths of TP cable */
|
|
DisablePolCor = 0x10,/* disable auto polarity correction */
|
|
DisableLinkPulse = 0x20, /* disable link pulse generation */
|
|
DisableAutoTx = 0x40, /* disable auto-transmit */
|
|
};
|
|
#define XIRCREG2_RBS 8 /* receive buffer start register */
|
|
#define XIRCREG2_LED 10 /* LED Configuration register */
|
|
/* values for the leds: Bits 2-0 for led 1
|
|
* 0 disabled Bits 5-3 for led 2
|
|
* 1 collision
|
|
* 2 noncollision
|
|
* 3 link_detected
|
|
* 4 incor_polarity
|
|
* 5 jabber
|
|
* 6 auto_assertion
|
|
* 7 rx_tx_activity
|
|
*/
|
|
#define XIRCREG2_MSR 12 /* Mohawk specific register */
|
|
|
|
#define XIRCREG4_GPR0 8 /* General Purpose Register 0 */
|
|
#define XIRCREG4_GPR1 9 /* General Purpose Register 1 */
|
|
#define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/
|
|
#define XIRCREG4_BOV 10 /* Bonding Version Register */
|
|
#define XIRCREG4_LMA 12 /* Local Memory Address Register */
|
|
#define XIRCREG4_LMD 14 /* Local Memory Data Port */
|
|
/* MAC register can only by accessed with 8 bit operations */
|
|
#define XIRCREG40_CMD0 8 /* Command Register (wr) */
|
|
enum xirc_cmd { /* Commands */
|
|
Transmit = 0x01,
|
|
EnableRecv = 0x04,
|
|
DisableRecv = 0x08,
|
|
Abort = 0x10,
|
|
Online = 0x20,
|
|
IntrAck = 0x40,
|
|
Offline = 0x80
|
|
};
|
|
#define XIRCREG5_RHSA0 10 /* Rx Host Start Address */
|
|
#define XIRCREG40_RXST0 9 /* Receive Status Register */
|
|
#define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */
|
|
#define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */
|
|
#define XIRCREG40_RMASK0 13 /* Receive Mask Register */
|
|
#define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */
|
|
#define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */
|
|
#define XIRCREG42_SWC0 8 /* Software Configuration 0 */
|
|
#define XIRCREG42_SWC1 9 /* Software Configuration 1 */
|
|
#define XIRCREG42_BOC 10 /* Back-Off Configuration */
|
|
#define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */
|
|
#define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */
|
|
#define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */
|
|
#define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */
|
|
#define XIRCREG45_REV 15 /* Revision Register (rd) */
|
|
#define XIRCREG50_IA 8 /* Individual Address (8-13) */
|
|
|
|
static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
|
|
|
|
|
|
#define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: "
|
|
#define KERR_XIRC KERN_ERR "xirc2ps_cs: "
|
|
#define KWRN_XIRC KERN_WARNING "xirc2ps_cs: "
|
|
#define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: "
|
|
#define KINF_XIRC KERN_INFO "xirc2ps_cs: "
|
|
|
|
/* card types */
|
|
#define XIR_UNKNOWN 0 /* unknown: not supported */
|
|
#define XIR_CE 1 /* (prodid 1) different hardware: not supported */
|
|
#define XIR_CE2 2 /* (prodid 2) */
|
|
#define XIR_CE3 3 /* (prodid 3) */
|
|
#define XIR_CEM 4 /* (prodid 1) different hardware: not supported */
|
|
#define XIR_CEM2 5 /* (prodid 2) */
|
|
#define XIR_CEM3 6 /* (prodid 3) */
|
|
#define XIR_CEM33 7 /* (prodid 4) */
|
|
#define XIR_CEM56M 8 /* (prodid 5) */
|
|
#define XIR_CEM56 9 /* (prodid 6) */
|
|
#define XIR_CM28 10 /* (prodid 3) modem only: not supported here */
|
|
#define XIR_CM33 11 /* (prodid 4) modem only: not supported here */
|
|
#define XIR_CM56 12 /* (prodid 5) modem only: not supported here */
|
|
#define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */
|
|
#define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */
|
|
/*====================================================================*/
|
|
|
|
/* Module parameters */
|
|
|
|
MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver");
|
|
MODULE_LICENSE("Dual MPL/GPL");
|
|
|
|
#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
|
|
|
|
INT_MODULE_PARM(if_port, 0);
|
|
INT_MODULE_PARM(full_duplex, 0);
|
|
INT_MODULE_PARM(do_sound, 1);
|
|
INT_MODULE_PARM(lockup_hack, 0); /* anti lockup hack */
|
|
|
|
/*====================================================================*/
|
|
|
|
/* We do not process more than these number of bytes during one
|
|
* interrupt. (Of course we receive complete packets, so this is not
|
|
* an exact value).
|
|
* Something between 2000..22000; first value gives best interrupt latency,
|
|
* the second enables the usage of the complete on-chip buffer. We use the
|
|
* high value as the initial value.
|
|
*/
|
|
static unsigned maxrx_bytes = 22000;
|
|
|
|
/* MII management prototypes */
|
|
static void mii_idle(unsigned int ioaddr);
|
|
static void mii_putbit(unsigned int ioaddr, unsigned data);
|
|
static int mii_getbit(unsigned int ioaddr);
|
|
static void mii_wbits(unsigned int ioaddr, unsigned data, int len);
|
|
static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg);
|
|
static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg,
|
|
unsigned data, int len);
|
|
|
|
/*
|
|
* The event() function is this driver's Card Services event handler.
|
|
* It will be called by Card Services when an appropriate card status
|
|
* event is received. The config() and release() entry points are
|
|
* used to configure or release a socket, in response to card insertion
|
|
* and ejection events. They are invoked from the event handler.
|
|
*/
|
|
|
|
static int has_ce2_string(struct pcmcia_device * link);
|
|
static int xirc2ps_config(struct pcmcia_device * link);
|
|
static void xirc2ps_release(struct pcmcia_device * link);
|
|
|
|
/****************
|
|
* The attach() and detach() entry points are used to create and destroy
|
|
* "instances" of the driver, where each instance represents everything
|
|
* needed to manage one actual PCMCIA card.
|
|
*/
|
|
|
|
static void xirc2ps_detach(struct pcmcia_device *p_dev);
|
|
|
|
/****************
|
|
* You'll also need to prototype all the functions that will actually
|
|
* be used to talk to your device. See 'pcmem_cs' for a good example
|
|
* of a fully self-sufficient driver; the other drivers rely more or
|
|
* less on other parts of the kernel.
|
|
*/
|
|
|
|
static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id);
|
|
|
|
typedef struct local_info_t {
|
|
struct net_device *dev;
|
|
struct pcmcia_device *p_dev;
|
|
|
|
int card_type;
|
|
int probe_port;
|
|
int silicon; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */
|
|
int mohawk; /* a CE3 type card */
|
|
int dingo; /* a CEM56 type card */
|
|
int new_mii; /* has full 10baseT/100baseT MII */
|
|
int modem; /* is a multi function card (i.e with a modem) */
|
|
void __iomem *dingo_ccr; /* only used for CEM56 cards */
|
|
unsigned last_ptr_value; /* last packets transmitted value */
|
|
const char *manf_str;
|
|
struct work_struct tx_timeout_task;
|
|
} local_info_t;
|
|
|
|
/****************
|
|
* Some more prototypes
|
|
*/
|
|
static netdev_tx_t do_start_xmit(struct sk_buff *skb,
|
|
struct net_device *dev);
|
|
static void xirc_tx_timeout(struct net_device *dev);
|
|
static void xirc2ps_tx_timeout_task(struct work_struct *work);
|
|
static void set_addresses(struct net_device *dev);
|
|
static void set_multicast_list(struct net_device *dev);
|
|
static int set_card_type(struct pcmcia_device *link);
|
|
static int do_config(struct net_device *dev, struct ifmap *map);
|
|
static int do_open(struct net_device *dev);
|
|
static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static const struct ethtool_ops netdev_ethtool_ops;
|
|
static void hardreset(struct net_device *dev);
|
|
static void do_reset(struct net_device *dev, int full);
|
|
static int init_mii(struct net_device *dev);
|
|
static void do_powerdown(struct net_device *dev);
|
|
static int do_stop(struct net_device *dev);
|
|
|
|
/*=============== Helper functions =========================*/
|
|
#define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR)
|
|
#define GetByte(reg) ((unsigned)inb(ioaddr + (reg)))
|
|
#define GetWord(reg) ((unsigned)inw(ioaddr + (reg)))
|
|
#define PutByte(reg,value) outb((value), ioaddr+(reg))
|
|
#define PutWord(reg,value) outw((value), ioaddr+(reg))
|
|
|
|
/*====== Functions used for debugging =================================*/
|
|
#if 0 /* reading regs may change system status */
|
|
static void
|
|
PrintRegisters(struct net_device *dev)
|
|
{
|
|
unsigned int ioaddr = dev->base_addr;
|
|
|
|
if (pc_debug > 1) {
|
|
int i, page;
|
|
|
|
printk(KDBG_XIRC "Register common: ");
|
|
for (i = 0; i < 8; i++)
|
|
printk(" %2.2x", GetByte(i));
|
|
printk("\n");
|
|
for (page = 0; page <= 8; page++) {
|
|
printk(KDBG_XIRC "Register page %2x: ", page);
|
|
SelectPage(page);
|
|
for (i = 8; i < 16; i++)
|
|
printk(" %2.2x", GetByte(i));
|
|
printk("\n");
|
|
}
|
|
for (page=0x40 ; page <= 0x5f; page++) {
|
|
if (page == 0x43 || (page >= 0x46 && page <= 0x4f) ||
|
|
(page >= 0x51 && page <=0x5e))
|
|
continue;
|
|
printk(KDBG_XIRC "Register page %2x: ", page);
|
|
SelectPage(page);
|
|
for (i = 8; i < 16; i++)
|
|
printk(" %2.2x", GetByte(i));
|
|
printk("\n");
|
|
}
|
|
}
|
|
}
|
|
#endif /* 0 */
|
|
|
|
/*============== MII Management functions ===============*/
|
|
|
|
/****************
|
|
* Turn around for read
|
|
*/
|
|
static void
|
|
mii_idle(unsigned int ioaddr)
|
|
{
|
|
PutByte(XIRCREG2_GPR2, 0x04|0); /* drive MDCK low */
|
|
udelay(1);
|
|
PutByte(XIRCREG2_GPR2, 0x04|1); /* and drive MDCK high */
|
|
udelay(1);
|
|
}
|
|
|
|
/****************
|
|
* Write a bit to MDI/O
|
|
*/
|
|
static void
|
|
mii_putbit(unsigned int ioaddr, unsigned data)
|
|
{
|
|
#if 1
|
|
if (data) {
|
|
PutByte(XIRCREG2_GPR2, 0x0c|2|0); /* set MDIO */
|
|
udelay(1);
|
|
PutByte(XIRCREG2_GPR2, 0x0c|2|1); /* and drive MDCK high */
|
|
udelay(1);
|
|
} else {
|
|
PutByte(XIRCREG2_GPR2, 0x0c|0|0); /* clear MDIO */
|
|
udelay(1);
|
|
PutByte(XIRCREG2_GPR2, 0x0c|0|1); /* and drive MDCK high */
|
|
udelay(1);
|
|
}
|
|
#else
|
|
if (data) {
|
|
PutWord(XIRCREG2_GPR2-1, 0x0e0e);
|
|
udelay(1);
|
|
PutWord(XIRCREG2_GPR2-1, 0x0f0f);
|
|
udelay(1);
|
|
} else {
|
|
PutWord(XIRCREG2_GPR2-1, 0x0c0c);
|
|
udelay(1);
|
|
PutWord(XIRCREG2_GPR2-1, 0x0d0d);
|
|
udelay(1);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/****************
|
|
* Get a bit from MDI/O
|
|
*/
|
|
static int
|
|
mii_getbit(unsigned int ioaddr)
|
|
{
|
|
unsigned d;
|
|
|
|
PutByte(XIRCREG2_GPR2, 4|0); /* drive MDCK low */
|
|
udelay(1);
|
|
d = GetByte(XIRCREG2_GPR2); /* read MDIO */
|
|
PutByte(XIRCREG2_GPR2, 4|1); /* drive MDCK high again */
|
|
udelay(1);
|
|
return d & 0x20; /* read MDIO */
|
|
}
|
|
|
|
static void
|
|
mii_wbits(unsigned int ioaddr, unsigned data, int len)
|
|
{
|
|
unsigned m = 1 << (len-1);
|
|
for (; m; m >>= 1)
|
|
mii_putbit(ioaddr, data & m);
|
|
}
|
|
|
|
static unsigned
|
|
mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg)
|
|
{
|
|
int i;
|
|
unsigned data=0, m;
|
|
|
|
SelectPage(2);
|
|
for (i=0; i < 32; i++) /* 32 bit preamble */
|
|
mii_putbit(ioaddr, 1);
|
|
mii_wbits(ioaddr, 0x06, 4); /* Start and opcode for read */
|
|
mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
|
|
mii_wbits(ioaddr, phyreg, 5); /* PHY register to read */
|
|
mii_idle(ioaddr); /* turn around */
|
|
mii_getbit(ioaddr);
|
|
|
|
for (m = 1<<15; m; m >>= 1)
|
|
if (mii_getbit(ioaddr))
|
|
data |= m;
|
|
mii_idle(ioaddr);
|
|
return data;
|
|
}
|
|
|
|
static void
|
|
mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data,
|
|
int len)
|
|
{
|
|
int i;
|
|
|
|
SelectPage(2);
|
|
for (i=0; i < 32; i++) /* 32 bit preamble */
|
|
mii_putbit(ioaddr, 1);
|
|
mii_wbits(ioaddr, 0x05, 4); /* Start and opcode for write */
|
|
mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
|
|
mii_wbits(ioaddr, phyreg, 5); /* PHY Register to write */
|
|
mii_putbit(ioaddr, 1); /* turn around */
|
|
mii_putbit(ioaddr, 0);
|
|
mii_wbits(ioaddr, data, len); /* And write the data */
|
|
mii_idle(ioaddr);
|
|
}
|
|
|
|
/*============= Main bulk of functions =========================*/
|
|
|
|
static const struct net_device_ops netdev_ops = {
|
|
.ndo_open = do_open,
|
|
.ndo_stop = do_stop,
|
|
.ndo_start_xmit = do_start_xmit,
|
|
.ndo_tx_timeout = xirc_tx_timeout,
|
|
.ndo_set_config = do_config,
|
|
.ndo_do_ioctl = do_ioctl,
|
|
.ndo_set_multicast_list = set_multicast_list,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
};
|
|
|
|
/****************
|
|
* xirc2ps_attach() creates an "instance" of the driver, allocating
|
|
* local data structures for one device. The device is registered
|
|
* with Card Services.
|
|
*
|
|
* The dev_link structure is initialized, but we don't actually
|
|
* configure the card at this point -- we wait until we receive a
|
|
* card insertion event.
|
|
*/
|
|
|
|
static int
|
|
xirc2ps_probe(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev;
|
|
local_info_t *local;
|
|
|
|
dev_dbg(&link->dev, "attach()\n");
|
|
|
|
/* Allocate the device structure */
|
|
dev = alloc_etherdev(sizeof(local_info_t));
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
local = netdev_priv(dev);
|
|
local->dev = dev;
|
|
local->p_dev = link;
|
|
link->priv = dev;
|
|
|
|
/* General socket configuration */
|
|
link->conf.Attributes = CONF_ENABLE_IRQ;
|
|
link->conf.IntType = INT_MEMORY_AND_IO;
|
|
link->conf.ConfigIndex = 1;
|
|
|
|
/* Fill in card specific entries */
|
|
dev->netdev_ops = &netdev_ops;
|
|
dev->ethtool_ops = &netdev_ethtool_ops;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task);
|
|
|
|
return xirc2ps_config(link);
|
|
} /* xirc2ps_attach */
|
|
|
|
/****************
|
|
* This deletes a driver "instance". The device is de-registered
|
|
* with Card Services. If it has been released, all local data
|
|
* structures are freed. Otherwise, the structures will be freed
|
|
* when the device is released.
|
|
*/
|
|
|
|
static void
|
|
xirc2ps_detach(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
|
|
dev_dbg(&link->dev, "detach\n");
|
|
|
|
unregister_netdev(dev);
|
|
|
|
xirc2ps_release(link);
|
|
|
|
free_netdev(dev);
|
|
} /* xirc2ps_detach */
|
|
|
|
/****************
|
|
* Detect the type of the card. s is the buffer with the data of tuple 0x20
|
|
* Returns: 0 := not supported
|
|
* mediaid=11 and prodid=47
|
|
* Media-Id bits:
|
|
* Ethernet 0x01
|
|
* Tokenring 0x02
|
|
* Arcnet 0x04
|
|
* Wireless 0x08
|
|
* Modem 0x10
|
|
* GSM only 0x20
|
|
* Prod-Id bits:
|
|
* Pocket 0x10
|
|
* External 0x20
|
|
* Creditcard 0x40
|
|
* Cardbus 0x80
|
|
*
|
|
*/
|
|
static int
|
|
set_card_type(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
local_info_t *local = netdev_priv(dev);
|
|
u8 *buf;
|
|
unsigned int cisrev, mediaid, prodid;
|
|
size_t len;
|
|
|
|
len = pcmcia_get_tuple(link, CISTPL_MANFID, &buf);
|
|
if (len < 5) {
|
|
dev_err(&link->dev, "invalid CIS -- sorry\n");
|
|
return 0;
|
|
}
|
|
|
|
cisrev = buf[2];
|
|
mediaid = buf[3];
|
|
prodid = buf[4];
|
|
|
|
dev_dbg(&link->dev, "cisrev=%02x mediaid=%02x prodid=%02x\n",
|
|
cisrev, mediaid, prodid);
|
|
|
|
local->mohawk = 0;
|
|
local->dingo = 0;
|
|
local->modem = 0;
|
|
local->card_type = XIR_UNKNOWN;
|
|
if (!(prodid & 0x40)) {
|
|
printk(KNOT_XIRC "Ooops: Not a creditcard\n");
|
|
return 0;
|
|
}
|
|
if (!(mediaid & 0x01)) {
|
|
printk(KNOT_XIRC "Not an Ethernet card\n");
|
|
return 0;
|
|
}
|
|
if (mediaid & 0x10) {
|
|
local->modem = 1;
|
|
switch(prodid & 15) {
|
|
case 1: local->card_type = XIR_CEM ; break;
|
|
case 2: local->card_type = XIR_CEM2 ; break;
|
|
case 3: local->card_type = XIR_CEM3 ; break;
|
|
case 4: local->card_type = XIR_CEM33 ; break;
|
|
case 5: local->card_type = XIR_CEM56M;
|
|
local->mohawk = 1;
|
|
break;
|
|
case 6:
|
|
case 7: /* 7 is the RealPort 10/56 */
|
|
local->card_type = XIR_CEM56 ;
|
|
local->mohawk = 1;
|
|
local->dingo = 1;
|
|
break;
|
|
}
|
|
} else {
|
|
switch(prodid & 15) {
|
|
case 1: local->card_type = has_ce2_string(link)? XIR_CE2 : XIR_CE ;
|
|
break;
|
|
case 2: local->card_type = XIR_CE2; break;
|
|
case 3: local->card_type = XIR_CE3;
|
|
local->mohawk = 1;
|
|
break;
|
|
}
|
|
}
|
|
if (local->card_type == XIR_CE || local->card_type == XIR_CEM) {
|
|
printk(KNOT_XIRC "Sorry, this is an old CE card\n");
|
|
return 0;
|
|
}
|
|
if (local->card_type == XIR_UNKNOWN)
|
|
printk(KNOT_XIRC "unknown card (mediaid=%02x prodid=%02x)\n",
|
|
mediaid, prodid);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/****************
|
|
* There are some CE2 cards out which claim to be a CE card.
|
|
* This function looks for a "CE2" in the 3rd version field.
|
|
* Returns: true if this is a CE2
|
|
*/
|
|
static int
|
|
has_ce2_string(struct pcmcia_device * p_dev)
|
|
{
|
|
if (p_dev->prod_id[2] && strstr(p_dev->prod_id[2], "CE2"))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
xirc2ps_config_modem(struct pcmcia_device *p_dev,
|
|
cistpl_cftable_entry_t *cf,
|
|
cistpl_cftable_entry_t *dflt,
|
|
unsigned int vcc,
|
|
void *priv_data)
|
|
{
|
|
unsigned int ioaddr;
|
|
|
|
if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
|
|
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
|
|
p_dev->resource[1]->start = cf->io.win[0].base;
|
|
p_dev->resource[0]->start = ioaddr;
|
|
if (!pcmcia_request_io(p_dev))
|
|
return 0;
|
|
}
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int
|
|
xirc2ps_config_check(struct pcmcia_device *p_dev,
|
|
cistpl_cftable_entry_t *cf,
|
|
cistpl_cftable_entry_t *dflt,
|
|
unsigned int vcc,
|
|
void *priv_data)
|
|
{
|
|
int *pass = priv_data;
|
|
|
|
if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
|
|
p_dev->resource[1]->start = cf->io.win[0].base;
|
|
p_dev->resource[0]->start = p_dev->resource[1]->start
|
|
+ (*pass ? (cf->index & 0x20 ? -24:8)
|
|
: (cf->index & 0x20 ? 8:-24));
|
|
if (!pcmcia_request_io(p_dev))
|
|
return 0;
|
|
}
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev,
|
|
tuple_t *tuple,
|
|
void *priv)
|
|
{
|
|
struct net_device *dev = priv;
|
|
int i;
|
|
|
|
if (tuple->TupleDataLen != 13)
|
|
return -EINVAL;
|
|
if ((tuple->TupleData[0] != 2) || (tuple->TupleData[1] != 1) ||
|
|
(tuple->TupleData[2] != 6))
|
|
return -EINVAL;
|
|
/* another try (James Lehmer's CE2 version 4.1)*/
|
|
for (i = 2; i < 6; i++)
|
|
dev->dev_addr[i] = tuple->TupleData[i+2];
|
|
return 0;
|
|
};
|
|
|
|
|
|
/****************
|
|
* xirc2ps_config() is scheduled to run after a CARD_INSERTION event
|
|
* is received, to configure the PCMCIA socket, and to make the
|
|
* ethernet device available to the system.
|
|
*/
|
|
static int
|
|
xirc2ps_config(struct pcmcia_device * link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
local_info_t *local = netdev_priv(dev);
|
|
unsigned int ioaddr;
|
|
int err;
|
|
u8 *buf;
|
|
size_t len;
|
|
|
|
local->dingo_ccr = NULL;
|
|
|
|
dev_dbg(&link->dev, "config\n");
|
|
|
|
/* Is this a valid card */
|
|
if (link->has_manf_id == 0) {
|
|
printk(KNOT_XIRC "manfid not found in CIS\n");
|
|
goto failure;
|
|
}
|
|
|
|
switch (link->manf_id) {
|
|
case MANFID_XIRCOM:
|
|
local->manf_str = "Xircom";
|
|
break;
|
|
case MANFID_ACCTON:
|
|
local->manf_str = "Accton";
|
|
break;
|
|
case MANFID_COMPAQ:
|
|
case MANFID_COMPAQ2:
|
|
local->manf_str = "Compaq";
|
|
break;
|
|
case MANFID_INTEL:
|
|
local->manf_str = "Intel";
|
|
break;
|
|
case MANFID_TOSHIBA:
|
|
local->manf_str = "Toshiba";
|
|
break;
|
|
default:
|
|
printk(KNOT_XIRC "Unknown Card Manufacturer ID: 0x%04x\n",
|
|
(unsigned)link->manf_id);
|
|
goto failure;
|
|
}
|
|
dev_dbg(&link->dev, "found %s card\n", local->manf_str);
|
|
|
|
if (!set_card_type(link)) {
|
|
printk(KNOT_XIRC "this card is not supported\n");
|
|
goto failure;
|
|
}
|
|
|
|
/* get the ethernet address from the CIS */
|
|
err = pcmcia_get_mac_from_cis(link, dev);
|
|
|
|
/* not found: try to get the node-id from tuple 0x89 */
|
|
if (err) {
|
|
len = pcmcia_get_tuple(link, 0x89, &buf);
|
|
/* data layout looks like tuple 0x22 */
|
|
if (buf && len == 8) {
|
|
if (*buf == CISTPL_FUNCE_LAN_NODE_ID) {
|
|
int i;
|
|
for (i = 2; i < 6; i++)
|
|
dev->dev_addr[i] = buf[i+2];
|
|
} else
|
|
err = -1;
|
|
}
|
|
kfree(buf);
|
|
}
|
|
|
|
if (err)
|
|
err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev);
|
|
|
|
if (err) {
|
|
printk(KNOT_XIRC "node-id not found in CIS\n");
|
|
goto failure;
|
|
}
|
|
|
|
link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
|
|
if (local->modem) {
|
|
int pass;
|
|
|
|
if (do_sound) {
|
|
link->conf.Attributes |= CONF_ENABLE_SPKR;
|
|
link->conf.Status |= CCSR_AUDIO_ENA;
|
|
}
|
|
link->resource[1]->end = 8;
|
|
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
|
|
if (local->dingo) {
|
|
/* Take the Modem IO port from the CIS and scan for a free
|
|
* Ethernet port */
|
|
link->resource[0]->end = 16; /* no Mako stuff anymore */
|
|
if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
|
|
goto port_found;
|
|
} else {
|
|
link->resource[0]->end = 18;
|
|
/* We do 2 passes here: The first one uses the regular mapping and
|
|
* the second tries again, thereby considering that the 32 ports are
|
|
* mirrored every 32 bytes. Actually we use a mirrored port for
|
|
* the Mako if (on the first pass) the COR bit 5 is set.
|
|
*/
|
|
for (pass=0; pass < 2; pass++)
|
|
if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass))
|
|
goto port_found;
|
|
/* if special option:
|
|
* try to configure as Ethernet only.
|
|
* .... */
|
|
}
|
|
printk(KNOT_XIRC "no ports available\n");
|
|
} else {
|
|
link->io_lines = 10;
|
|
link->resource[0]->end = 16;
|
|
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
|
|
link->resource[0]->start = ioaddr;
|
|
if (!(err = pcmcia_request_io(link)))
|
|
goto port_found;
|
|
}
|
|
link->resource[0]->start = 0; /* let CS decide */
|
|
if ((err = pcmcia_request_io(link)))
|
|
goto config_error;
|
|
}
|
|
port_found:
|
|
if (err)
|
|
goto config_error;
|
|
|
|
/****************
|
|
* Now allocate an interrupt line. Note that this does not
|
|
* actually assign a handler to the interrupt.
|
|
*/
|
|
if ((err=pcmcia_request_irq(link, xirc2ps_interrupt)))
|
|
goto config_error;
|
|
|
|
/****************
|
|
* This actually configures the PCMCIA socket -- setting up
|
|
* the I/O windows and the interrupt mapping.
|
|
*/
|
|
if ((err=pcmcia_request_configuration(link, &link->conf)))
|
|
goto config_error;
|
|
|
|
if (local->dingo) {
|
|
win_req_t req;
|
|
|
|
/* Reset the modem's BAR to the correct value
|
|
* This is necessary because in the RequestConfiguration call,
|
|
* the base address of the ethernet port (BasePort1) is written
|
|
* to the BAR registers of the modem.
|
|
*/
|
|
err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8)
|
|
link->resource[1]->start & 0xff);
|
|
if (err)
|
|
goto config_error;
|
|
|
|
err = pcmcia_write_config_byte(link, CISREG_IOBASE_1,
|
|
(link->resource[1]->start >> 8) & 0xff);
|
|
if (err)
|
|
goto config_error;
|
|
|
|
/* There is no config entry for the Ethernet part which
|
|
* is at 0x0800. So we allocate a window into the attribute
|
|
* memory and write direct to the CIS registers
|
|
*/
|
|
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
|
|
req.Base = req.Size = 0;
|
|
req.AccessSpeed = 0;
|
|
if ((err = pcmcia_request_window(link, &req, &link->win)))
|
|
goto config_error;
|
|
|
|
local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
|
|
if ((err = pcmcia_map_mem_page(link, link->win, 0)))
|
|
goto config_error;
|
|
|
|
/* Setup the CCRs; there are no infos in the CIS about the Ethernet
|
|
* part.
|
|
*/
|
|
writeb(0x47, local->dingo_ccr + CISREG_COR);
|
|
ioaddr = link->resource[0]->start;
|
|
writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0);
|
|
writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
|
|
|
|
#if 0
|
|
{
|
|
u_char tmp;
|
|
printk(KERN_INFO "ECOR:");
|
|
for (i=0; i < 7; i++) {
|
|
tmp = readb(local->dingo_ccr + i*2);
|
|
printk(" %02x", tmp);
|
|
}
|
|
printk("\n");
|
|
printk(KERN_INFO "DCOR:");
|
|
for (i=0; i < 4; i++) {
|
|
tmp = readb(local->dingo_ccr + 0x20 + i*2);
|
|
printk(" %02x", tmp);
|
|
}
|
|
printk("\n");
|
|
printk(KERN_INFO "SCOR:");
|
|
for (i=0; i < 10; i++) {
|
|
tmp = readb(local->dingo_ccr + 0x40 + i*2);
|
|
printk(" %02x", tmp);
|
|
}
|
|
printk("\n");
|
|
}
|
|
#endif
|
|
|
|
writeb(0x01, local->dingo_ccr + 0x20);
|
|
writeb(0x0c, local->dingo_ccr + 0x22);
|
|
writeb(0x00, local->dingo_ccr + 0x24);
|
|
writeb(0x00, local->dingo_ccr + 0x26);
|
|
writeb(0x00, local->dingo_ccr + 0x28);
|
|
}
|
|
|
|
/* The if_port symbol can be set when the module is loaded */
|
|
local->probe_port=0;
|
|
if (!if_port) {
|
|
local->probe_port = dev->if_port = 1;
|
|
} else if ((if_port >= 1 && if_port <= 2) ||
|
|
(local->mohawk && if_port==4))
|
|
dev->if_port = if_port;
|
|
else
|
|
printk(KNOT_XIRC "invalid if_port requested\n");
|
|
|
|
/* we can now register the device with the net subsystem */
|
|
dev->irq = link->irq;
|
|
dev->base_addr = link->resource[0]->start;
|
|
|
|
if (local->dingo)
|
|
do_reset(dev, 1); /* a kludge to make the cem56 work */
|
|
|
|
SET_NETDEV_DEV(dev, &link->dev);
|
|
|
|
if ((err=register_netdev(dev))) {
|
|
printk(KNOT_XIRC "register_netdev() failed\n");
|
|
goto config_error;
|
|
}
|
|
|
|
/* give some infos about the hardware */
|
|
printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr %pM\n",
|
|
dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq,
|
|
dev->dev_addr);
|
|
|
|
return 0;
|
|
|
|
config_error:
|
|
xirc2ps_release(link);
|
|
return -ENODEV;
|
|
|
|
failure:
|
|
return -ENODEV;
|
|
} /* xirc2ps_config */
|
|
|
|
/****************
|
|
* After a card is removed, xirc2ps_release() will unregister the net
|
|
* device, and release the PCMCIA configuration. If the device is
|
|
* still open, this will be postponed until it is closed.
|
|
*/
|
|
static void
|
|
xirc2ps_release(struct pcmcia_device *link)
|
|
{
|
|
dev_dbg(&link->dev, "release\n");
|
|
|
|
if (link->win) {
|
|
struct net_device *dev = link->priv;
|
|
local_info_t *local = netdev_priv(dev);
|
|
if (local->dingo)
|
|
iounmap(local->dingo_ccr - 0x0800);
|
|
}
|
|
pcmcia_disable_device(link);
|
|
} /* xirc2ps_release */
|
|
|
|
/*====================================================================*/
|
|
|
|
|
|
static int xirc2ps_suspend(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
|
|
if (link->open) {
|
|
netif_device_detach(dev);
|
|
do_powerdown(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xirc2ps_resume(struct pcmcia_device *link)
|
|
{
|
|
struct net_device *dev = link->priv;
|
|
|
|
if (link->open) {
|
|
do_reset(dev,1);
|
|
netif_device_attach(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*====================================================================*/
|
|
|
|
/****************
|
|
* This is the Interrupt service route.
|
|
*/
|
|
static irqreturn_t
|
|
xirc2ps_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = (struct net_device *)dev_id;
|
|
local_info_t *lp = netdev_priv(dev);
|
|
unsigned int ioaddr;
|
|
u_char saved_page;
|
|
unsigned bytes_rcvd;
|
|
unsigned int_status, eth_status, rx_status, tx_status;
|
|
unsigned rsr, pktlen;
|
|
ulong start_ticks = jiffies; /* fixme: jiffies rollover every 497 days
|
|
* is this something to worry about?
|
|
* -- on a laptop?
|
|
*/
|
|
|
|
if (!netif_device_present(dev))
|
|
return IRQ_HANDLED;
|
|
|
|
ioaddr = dev->base_addr;
|
|
if (lp->mohawk) { /* must disable the interrupt */
|
|
PutByte(XIRCREG_CR, 0);
|
|
}
|
|
|
|
pr_debug("%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr);
|
|
|
|
saved_page = GetByte(XIRCREG_PR);
|
|
/* Read the ISR to see whats the cause for the interrupt.
|
|
* This also clears the interrupt flags on CE2 cards
|
|
*/
|
|
int_status = GetByte(XIRCREG_ISR);
|
|
bytes_rcvd = 0;
|
|
loop_entry:
|
|
if (int_status == 0xff) { /* card may be ejected */
|
|
pr_debug("%s: interrupt %d for dead card\n", dev->name, irq);
|
|
goto leave;
|
|
}
|
|
eth_status = GetByte(XIRCREG_ESR);
|
|
|
|
SelectPage(0x40);
|
|
rx_status = GetByte(XIRCREG40_RXST0);
|
|
PutByte(XIRCREG40_RXST0, (~rx_status & 0xff));
|
|
tx_status = GetByte(XIRCREG40_TXST0);
|
|
tx_status |= GetByte(XIRCREG40_TXST1) << 8;
|
|
PutByte(XIRCREG40_TXST0, 0);
|
|
PutByte(XIRCREG40_TXST1, 0);
|
|
|
|
pr_debug("%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
|
|
dev->name, int_status, eth_status, rx_status, tx_status);
|
|
|
|
/***** receive section ******/
|
|
SelectPage(0);
|
|
while (eth_status & FullPktRcvd) {
|
|
rsr = GetByte(XIRCREG0_RSR);
|
|
if (bytes_rcvd > maxrx_bytes && (rsr & PktRxOk)) {
|
|
/* too many bytes received during this int, drop the rest of the
|
|
* packets */
|
|
dev->stats.rx_dropped++;
|
|
pr_debug("%s: RX drop, too much done\n", dev->name);
|
|
} else if (rsr & PktRxOk) {
|
|
struct sk_buff *skb;
|
|
|
|
pktlen = GetWord(XIRCREG0_RBC);
|
|
bytes_rcvd += pktlen;
|
|
|
|
pr_debug("rsr=%#02x packet_length=%u\n", rsr, pktlen);
|
|
|
|
skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */
|
|
if (!skb) {
|
|
printk(KNOT_XIRC "low memory, packet dropped (size=%u)\n",
|
|
pktlen);
|
|
dev->stats.rx_dropped++;
|
|
} else { /* okay get the packet */
|
|
skb_reserve(skb, 2);
|
|
if (lp->silicon == 0 ) { /* work around a hardware bug */
|
|
unsigned rhsa; /* receive start address */
|
|
|
|
SelectPage(5);
|
|
rhsa = GetWord(XIRCREG5_RHSA0);
|
|
SelectPage(0);
|
|
rhsa += 3; /* skip control infos */
|
|
if (rhsa >= 0x8000)
|
|
rhsa = 0;
|
|
if (rhsa + pktlen > 0x8000) {
|
|
unsigned i;
|
|
u_char *buf = skb_put(skb, pktlen);
|
|
for (i=0; i < pktlen ; i++, rhsa++) {
|
|
buf[i] = GetByte(XIRCREG_EDP);
|
|
if (rhsa == 0x8000) {
|
|
rhsa = 0;
|
|
i--;
|
|
}
|
|
}
|
|
} else {
|
|
insw(ioaddr+XIRCREG_EDP,
|
|
skb_put(skb, pktlen), (pktlen+1)>>1);
|
|
}
|
|
}
|
|
#if 0
|
|
else if (lp->mohawk) {
|
|
/* To use this 32 bit access we should use
|
|
* a manual optimized loop
|
|
* Also the words are swapped, we can get more
|
|
* performance by using 32 bit access and swapping
|
|
* the words in a register. Will need this for cardbus
|
|
*
|
|
* Note: don't forget to change the ALLOC_SKB to .. +3
|
|
*/
|
|
unsigned i;
|
|
u_long *p = skb_put(skb, pktlen);
|
|
register u_long a;
|
|
unsigned int edpreg = ioaddr+XIRCREG_EDP-2;
|
|
for (i=0; i < len ; i += 4, p++) {
|
|
a = inl(edpreg);
|
|
__asm__("rorl $16,%0\n\t"
|
|
:"=q" (a)
|
|
: "0" (a));
|
|
*p = a;
|
|
}
|
|
}
|
|
#endif
|
|
else {
|
|
insw(ioaddr+XIRCREG_EDP, skb_put(skb, pktlen),
|
|
(pktlen+1)>>1);
|
|
}
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
netif_rx(skb);
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += pktlen;
|
|
if (!(rsr & PhyPkt))
|
|
dev->stats.multicast++;
|
|
}
|
|
} else { /* bad packet */
|
|
pr_debug("rsr=%#02x\n", rsr);
|
|
}
|
|
if (rsr & PktTooLong) {
|
|
dev->stats.rx_frame_errors++;
|
|
pr_debug("%s: Packet too long\n", dev->name);
|
|
}
|
|
if (rsr & CRCErr) {
|
|
dev->stats.rx_crc_errors++;
|
|
pr_debug("%s: CRC error\n", dev->name);
|
|
}
|
|
if (rsr & AlignErr) {
|
|
dev->stats.rx_fifo_errors++; /* okay ? */
|
|
pr_debug("%s: Alignment error\n", dev->name);
|
|
}
|
|
|
|
/* clear the received/dropped/error packet */
|
|
PutWord(XIRCREG0_DO, 0x8000); /* issue cmd: skip_rx_packet */
|
|
|
|
/* get the new ethernet status */
|
|
eth_status = GetByte(XIRCREG_ESR);
|
|
}
|
|
if (rx_status & 0x10) { /* Receive overrun */
|
|
dev->stats.rx_over_errors++;
|
|
PutByte(XIRCREG_CR, ClearRxOvrun);
|
|
pr_debug("receive overrun cleared\n");
|
|
}
|
|
|
|
/***** transmit section ******/
|
|
if (int_status & PktTxed) {
|
|
unsigned n, nn;
|
|
|
|
n = lp->last_ptr_value;
|
|
nn = GetByte(XIRCREG0_PTR);
|
|
lp->last_ptr_value = nn;
|
|
if (nn < n) /* rollover */
|
|
dev->stats.tx_packets += 256 - n;
|
|
else if (n == nn) { /* happens sometimes - don't know why */
|
|
pr_debug("PTR not changed?\n");
|
|
} else
|
|
dev->stats.tx_packets += lp->last_ptr_value - n;
|
|
netif_wake_queue(dev);
|
|
}
|
|
if (tx_status & 0x0002) { /* Execessive collissions */
|
|
pr_debug("tx restarted due to execssive collissions\n");
|
|
PutByte(XIRCREG_CR, RestartTx); /* restart transmitter process */
|
|
}
|
|
if (tx_status & 0x0040)
|
|
dev->stats.tx_aborted_errors++;
|
|
|
|
/* recalculate our work chunk so that we limit the duration of this
|
|
* ISR to about 1/10 of a second.
|
|
* Calculate only if we received a reasonable amount of bytes.
|
|
*/
|
|
if (bytes_rcvd > 1000) {
|
|
u_long duration = jiffies - start_ticks;
|
|
|
|
if (duration >= HZ/10) { /* if more than about 1/10 second */
|
|
maxrx_bytes = (bytes_rcvd * (HZ/10)) / duration;
|
|
if (maxrx_bytes < 2000)
|
|
maxrx_bytes = 2000;
|
|
else if (maxrx_bytes > 22000)
|
|
maxrx_bytes = 22000;
|
|
pr_debug("set maxrx=%u (rcvd=%u ticks=%lu)\n",
|
|
maxrx_bytes, bytes_rcvd, duration);
|
|
} else if (!duration && maxrx_bytes < 22000) {
|
|
/* now much faster */
|
|
maxrx_bytes += 2000;
|
|
if (maxrx_bytes > 22000)
|
|
maxrx_bytes = 22000;
|
|
pr_debug("set maxrx=%u\n", maxrx_bytes);
|
|
}
|
|
}
|
|
|
|
leave:
|
|
if (lockup_hack) {
|
|
if (int_status != 0xff && (int_status = GetByte(XIRCREG_ISR)) != 0)
|
|
goto loop_entry;
|
|
}
|
|
SelectPage(saved_page);
|
|
PutByte(XIRCREG_CR, EnableIntr); /* re-enable interrupts */
|
|
/* Instead of dropping packets during a receive, we could
|
|
* force an interrupt with this command:
|
|
* PutByte(XIRCREG_CR, EnableIntr|ForceIntr);
|
|
*/
|
|
return IRQ_HANDLED;
|
|
} /* xirc2ps_interrupt */
|
|
|
|
/*====================================================================*/
|
|
|
|
static void
|
|
xirc2ps_tx_timeout_task(struct work_struct *work)
|
|
{
|
|
local_info_t *local =
|
|
container_of(work, local_info_t, tx_timeout_task);
|
|
struct net_device *dev = local->dev;
|
|
/* reset the card */
|
|
do_reset(dev,1);
|
|
dev->trans_start = jiffies; /* prevent tx timeout */
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
static void
|
|
xirc_tx_timeout(struct net_device *dev)
|
|
{
|
|
local_info_t *lp = netdev_priv(dev);
|
|
dev->stats.tx_errors++;
|
|
printk(KERN_NOTICE "%s: transmit timed out\n", dev->name);
|
|
schedule_work(&lp->tx_timeout_task);
|
|
}
|
|
|
|
static netdev_tx_t
|
|
do_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
local_info_t *lp = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
int okay;
|
|
unsigned freespace;
|
|
unsigned pktlen = skb->len;
|
|
|
|
pr_debug("do_start_xmit(skb=%p, dev=%p) len=%u\n",
|
|
skb, dev, pktlen);
|
|
|
|
|
|
/* adjust the packet length to min. required
|
|
* and hope that the buffer is large enough
|
|
* to provide some random data.
|
|
* fixme: For Mohawk we can change this by sending
|
|
* a larger packetlen than we actually have; the chip will
|
|
* pad this in his buffer with random bytes
|
|
*/
|
|
if (pktlen < ETH_ZLEN)
|
|
{
|
|
if (skb_padto(skb, ETH_ZLEN))
|
|
return NETDEV_TX_OK;
|
|
pktlen = ETH_ZLEN;
|
|
}
|
|
|
|
netif_stop_queue(dev);
|
|
SelectPage(0);
|
|
PutWord(XIRCREG0_TRS, (u_short)pktlen+2);
|
|
freespace = GetWord(XIRCREG0_TSO);
|
|
okay = freespace & 0x8000;
|
|
freespace &= 0x7fff;
|
|
/* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
|
|
okay = pktlen +2 < freespace;
|
|
pr_debug("%s: avail. tx space=%u%s\n",
|
|
dev->name, freespace, okay ? " (okay)":" (not enough)");
|
|
if (!okay) { /* not enough space */
|
|
return NETDEV_TX_BUSY; /* upper layer may decide to requeue this packet */
|
|
}
|
|
/* send the packet */
|
|
PutWord(XIRCREG_EDP, (u_short)pktlen);
|
|
outsw(ioaddr+XIRCREG_EDP, skb->data, pktlen>>1);
|
|
if (pktlen & 1)
|
|
PutByte(XIRCREG_EDP, skb->data[pktlen-1]);
|
|
|
|
if (lp->mohawk)
|
|
PutByte(XIRCREG_CR, TransmitPacket|EnableIntr);
|
|
|
|
dev_kfree_skb (skb);
|
|
dev->stats.tx_bytes += pktlen;
|
|
netif_start_queue(dev);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
struct set_address_info {
|
|
int reg_nr;
|
|
int page_nr;
|
|
int mohawk;
|
|
unsigned int ioaddr;
|
|
};
|
|
|
|
static void set_address(struct set_address_info *sa_info, char *addr)
|
|
{
|
|
unsigned int ioaddr = sa_info->ioaddr;
|
|
int i;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
if (sa_info->reg_nr > 15) {
|
|
sa_info->reg_nr = 8;
|
|
sa_info->page_nr++;
|
|
SelectPage(sa_info->page_nr);
|
|
}
|
|
if (sa_info->mohawk)
|
|
PutByte(sa_info->reg_nr++, addr[5 - i]);
|
|
else
|
|
PutByte(sa_info->reg_nr++, addr[i]);
|
|
}
|
|
}
|
|
|
|
/****************
|
|
* Set all addresses: This first one is the individual address,
|
|
* the next 9 addresses are taken from the multicast list and
|
|
* the rest is filled with the individual address.
|
|
*/
|
|
static void set_addresses(struct net_device *dev)
|
|
{
|
|
unsigned int ioaddr = dev->base_addr;
|
|
local_info_t *lp = netdev_priv(dev);
|
|
struct netdev_hw_addr *ha;
|
|
struct set_address_info sa_info;
|
|
int i;
|
|
|
|
/*
|
|
* Setup the info structure so that by first set_address call it will do
|
|
* SelectPage with the right page number. Hence these ones here.
|
|
*/
|
|
sa_info.reg_nr = 15 + 1;
|
|
sa_info.page_nr = 0x50 - 1;
|
|
sa_info.mohawk = lp->mohawk;
|
|
sa_info.ioaddr = ioaddr;
|
|
|
|
set_address(&sa_info, dev->dev_addr);
|
|
i = 0;
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
if (i++ == 9)
|
|
break;
|
|
set_address(&sa_info, ha->addr);
|
|
}
|
|
while (i++ < 9)
|
|
set_address(&sa_info, dev->dev_addr);
|
|
SelectPage(0);
|
|
}
|
|
|
|
/****************
|
|
* Set or clear the multicast filter for this adaptor.
|
|
* We can filter up to 9 addresses, if more are requested we set
|
|
* multicast promiscuous mode.
|
|
*/
|
|
|
|
static void
|
|
set_multicast_list(struct net_device *dev)
|
|
{
|
|
unsigned int ioaddr = dev->base_addr;
|
|
unsigned value;
|
|
|
|
SelectPage(0x42);
|
|
value = GetByte(XIRCREG42_SWC1) & 0xC0;
|
|
|
|
if (dev->flags & IFF_PROMISC) { /* snoop */
|
|
PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */
|
|
} else if (netdev_mc_count(dev) > 9 || (dev->flags & IFF_ALLMULTI)) {
|
|
PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */
|
|
} else if (!netdev_mc_empty(dev)) {
|
|
/* the chip can filter 9 addresses perfectly */
|
|
PutByte(XIRCREG42_SWC1, value | 0x01);
|
|
SelectPage(0x40);
|
|
PutByte(XIRCREG40_CMD0, Offline);
|
|
set_addresses(dev);
|
|
SelectPage(0x40);
|
|
PutByte(XIRCREG40_CMD0, EnableRecv | Online);
|
|
} else { /* standard usage */
|
|
PutByte(XIRCREG42_SWC1, value | 0x00);
|
|
}
|
|
SelectPage(0);
|
|
}
|
|
|
|
static int
|
|
do_config(struct net_device *dev, struct ifmap *map)
|
|
{
|
|
local_info_t *local = netdev_priv(dev);
|
|
|
|
pr_debug("do_config(%p)\n", dev);
|
|
if (map->port != 255 && map->port != dev->if_port) {
|
|
if (map->port > 4)
|
|
return -EINVAL;
|
|
if (!map->port) {
|
|
local->probe_port = 1;
|
|
dev->if_port = 1;
|
|
} else {
|
|
local->probe_port = 0;
|
|
dev->if_port = map->port;
|
|
}
|
|
printk(KERN_INFO "%s: switching to %s port\n",
|
|
dev->name, if_names[dev->if_port]);
|
|
do_reset(dev,1); /* not the fine way :-) */
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/****************
|
|
* Open the driver
|
|
*/
|
|
static int
|
|
do_open(struct net_device *dev)
|
|
{
|
|
local_info_t *lp = netdev_priv(dev);
|
|
struct pcmcia_device *link = lp->p_dev;
|
|
|
|
dev_dbg(&link->dev, "do_open(%p)\n", dev);
|
|
|
|
/* Check that the PCMCIA card is still here. */
|
|
/* Physical device present signature. */
|
|
if (!pcmcia_dev_present(link))
|
|
return -ENODEV;
|
|
|
|
/* okay */
|
|
link->open++;
|
|
|
|
netif_start_queue(dev);
|
|
do_reset(dev,1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void netdev_get_drvinfo(struct net_device *dev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
strcpy(info->driver, "xirc2ps_cs");
|
|
sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
|
|
}
|
|
|
|
static const struct ethtool_ops netdev_ethtool_ops = {
|
|
.get_drvinfo = netdev_get_drvinfo,
|
|
};
|
|
|
|
static int
|
|
do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
local_info_t *local = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
struct mii_ioctl_data *data = if_mii(rq);
|
|
|
|
pr_debug("%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
|
|
dev->name, rq->ifr_ifrn.ifrn_name, cmd,
|
|
data->phy_id, data->reg_num, data->val_in, data->val_out);
|
|
|
|
if (!local->mohawk)
|
|
return -EOPNOTSUPP;
|
|
|
|
switch(cmd) {
|
|
case SIOCGMIIPHY: /* Get the address of the PHY in use. */
|
|
data->phy_id = 0; /* we have only this address */
|
|
/* fall through */
|
|
case SIOCGMIIREG: /* Read the specified MII register. */
|
|
data->val_out = mii_rd(ioaddr, data->phy_id & 0x1f,
|
|
data->reg_num & 0x1f);
|
|
break;
|
|
case SIOCSMIIREG: /* Write the specified MII register */
|
|
mii_wr(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in,
|
|
16);
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
hardreset(struct net_device *dev)
|
|
{
|
|
local_info_t *local = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
|
|
SelectPage(4);
|
|
udelay(1);
|
|
PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
|
|
msleep(40); /* wait 40 msec */
|
|
if (local->mohawk)
|
|
PutByte(XIRCREG4_GPR1, 1); /* set bit 0: power up */
|
|
else
|
|
PutByte(XIRCREG4_GPR1, 1 | 4); /* set bit 0: power up, bit 2: AIC */
|
|
msleep(20); /* wait 20 msec */
|
|
}
|
|
|
|
static void
|
|
do_reset(struct net_device *dev, int full)
|
|
{
|
|
local_info_t *local = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
unsigned value;
|
|
|
|
pr_debug("%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full);
|
|
|
|
hardreset(dev);
|
|
PutByte(XIRCREG_CR, SoftReset); /* set */
|
|
msleep(20); /* wait 20 msec */
|
|
PutByte(XIRCREG_CR, 0); /* clear */
|
|
msleep(40); /* wait 40 msec */
|
|
if (local->mohawk) {
|
|
SelectPage(4);
|
|
/* set pin GP1 and GP2 to output (0x0c)
|
|
* set GP1 to low to power up the ML6692 (0x00)
|
|
* set GP2 to high to power up the 10Mhz chip (0x02)
|
|
*/
|
|
PutByte(XIRCREG4_GPR0, 0x0e);
|
|
}
|
|
|
|
/* give the circuits some time to power up */
|
|
msleep(500); /* about 500ms */
|
|
|
|
local->last_ptr_value = 0;
|
|
local->silicon = local->mohawk ? (GetByte(XIRCREG4_BOV) & 0x70) >> 4
|
|
: (GetByte(XIRCREG4_BOV) & 0x30) >> 4;
|
|
|
|
if (local->probe_port) {
|
|
if (!local->mohawk) {
|
|
SelectPage(4);
|
|
PutByte(XIRCREG4_GPR0, 4);
|
|
local->probe_port = 0;
|
|
}
|
|
} else if (dev->if_port == 2) { /* enable 10Base2 */
|
|
SelectPage(0x42);
|
|
PutByte(XIRCREG42_SWC1, 0xC0);
|
|
} else { /* enable 10BaseT */
|
|
SelectPage(0x42);
|
|
PutByte(XIRCREG42_SWC1, 0x80);
|
|
}
|
|
msleep(40); /* wait 40 msec to let it complete */
|
|
|
|
#if 0
|
|
{
|
|
SelectPage(0);
|
|
value = GetByte(XIRCREG_ESR); /* read the ESR */
|
|
printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value);
|
|
}
|
|
#endif
|
|
|
|
/* setup the ECR */
|
|
SelectPage(1);
|
|
PutByte(XIRCREG1_IMR0, 0xff); /* allow all ints */
|
|
PutByte(XIRCREG1_IMR1, 1 ); /* and Set TxUnderrunDetect */
|
|
value = GetByte(XIRCREG1_ECR);
|
|
#if 0
|
|
if (local->mohawk)
|
|
value |= DisableLinkPulse;
|
|
PutByte(XIRCREG1_ECR, value);
|
|
#endif
|
|
pr_debug("%s: ECR is: %#02x\n", dev->name, value);
|
|
|
|
SelectPage(0x42);
|
|
PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */
|
|
|
|
if (local->silicon != 1) {
|
|
/* set the local memory dividing line.
|
|
* The comments in the sample code say that this is only
|
|
* settable with the scipper version 2 which is revision 0.
|
|
* Always for CE3 cards
|
|
*/
|
|
SelectPage(2);
|
|
PutWord(XIRCREG2_RBS, 0x2000);
|
|
}
|
|
|
|
if (full)
|
|
set_addresses(dev);
|
|
|
|
/* Hardware workaround:
|
|
* The receive byte pointer after reset is off by 1 so we need
|
|
* to move the offset pointer back to 0.
|
|
*/
|
|
SelectPage(0);
|
|
PutWord(XIRCREG0_DO, 0x2000); /* change offset command, off=0 */
|
|
|
|
/* setup MAC IMRs and clear status registers */
|
|
SelectPage(0x40); /* Bit 7 ... bit 0 */
|
|
PutByte(XIRCREG40_RMASK0, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
|
|
PutByte(XIRCREG40_TMASK0, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
|
|
PutByte(XIRCREG40_TMASK1, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/
|
|
PutByte(XIRCREG40_RXST0, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
|
|
PutByte(XIRCREG40_TXST0, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
|
|
PutByte(XIRCREG40_TXST1, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */
|
|
|
|
if (full && local->mohawk && init_mii(dev)) {
|
|
if (dev->if_port == 4 || local->dingo || local->new_mii) {
|
|
printk(KERN_INFO "%s: MII selected\n", dev->name);
|
|
SelectPage(2);
|
|
PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08);
|
|
msleep(20);
|
|
} else {
|
|
printk(KERN_INFO "%s: MII detected; using 10mbs\n",
|
|
dev->name);
|
|
SelectPage(0x42);
|
|
if (dev->if_port == 2) /* enable 10Base2 */
|
|
PutByte(XIRCREG42_SWC1, 0xC0);
|
|
else /* enable 10BaseT */
|
|
PutByte(XIRCREG42_SWC1, 0x80);
|
|
msleep(40); /* wait 40 msec to let it complete */
|
|
}
|
|
if (full_duplex)
|
|
PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex));
|
|
} else { /* No MII */
|
|
SelectPage(0);
|
|
value = GetByte(XIRCREG_ESR); /* read the ESR */
|
|
dev->if_port = (value & MediaSelect) ? 1 : 2;
|
|
}
|
|
|
|
/* configure the LEDs */
|
|
SelectPage(2);
|
|
if (dev->if_port == 1 || dev->if_port == 4) /* TP: Link and Activity */
|
|
PutByte(XIRCREG2_LED, 0x3b);
|
|
else /* Coax: Not-Collision and Activity */
|
|
PutByte(XIRCREG2_LED, 0x3a);
|
|
|
|
if (local->dingo)
|
|
PutByte(0x0b, 0x04); /* 100 Mbit LED */
|
|
|
|
/* enable receiver and put the mac online */
|
|
if (full) {
|
|
set_multicast_list(dev);
|
|
SelectPage(0x40);
|
|
PutByte(XIRCREG40_CMD0, EnableRecv | Online);
|
|
}
|
|
|
|
/* setup Ethernet IMR and enable interrupts */
|
|
SelectPage(1);
|
|
PutByte(XIRCREG1_IMR0, 0xff);
|
|
udelay(1);
|
|
SelectPage(0);
|
|
PutByte(XIRCREG_CR, EnableIntr);
|
|
if (local->modem && !local->dingo) { /* do some magic */
|
|
if (!(GetByte(0x10) & 0x01))
|
|
PutByte(0x10, 0x11); /* unmask master-int bit */
|
|
}
|
|
|
|
if (full)
|
|
printk(KERN_INFO "%s: media %s, silicon revision %d\n",
|
|
dev->name, if_names[dev->if_port], local->silicon);
|
|
/* We should switch back to page 0 to avoid a bug in revision 0
|
|
* where regs with offset below 8 can't be read after an access
|
|
* to the MAC registers */
|
|
SelectPage(0);
|
|
}
|
|
|
|
/****************
|
|
* Initialize the Media-Independent-Interface
|
|
* Returns: True if we have a good MII
|
|
*/
|
|
static int
|
|
init_mii(struct net_device *dev)
|
|
{
|
|
local_info_t *local = netdev_priv(dev);
|
|
unsigned int ioaddr = dev->base_addr;
|
|
unsigned control, status, linkpartner;
|
|
int i;
|
|
|
|
if (if_port == 4 || if_port == 1) { /* force 100BaseT or 10BaseT */
|
|
dev->if_port = if_port;
|
|
local->probe_port = 0;
|
|
return 1;
|
|
}
|
|
|
|
status = mii_rd(ioaddr, 0, 1);
|
|
if ((status & 0xff00) != 0x7800)
|
|
return 0; /* No MII */
|
|
|
|
local->new_mii = (mii_rd(ioaddr, 0, 2) != 0xffff);
|
|
|
|
if (local->probe_port)
|
|
control = 0x1000; /* auto neg */
|
|
else if (dev->if_port == 4)
|
|
control = 0x2000; /* no auto neg, 100mbs mode */
|
|
else
|
|
control = 0x0000; /* no auto neg, 10mbs mode */
|
|
mii_wr(ioaddr, 0, 0, control, 16);
|
|
udelay(100);
|
|
control = mii_rd(ioaddr, 0, 0);
|
|
|
|
if (control & 0x0400) {
|
|
printk(KERN_NOTICE "%s can't take PHY out of isolation mode\n",
|
|
dev->name);
|
|
local->probe_port = 0;
|
|
return 0;
|
|
}
|
|
|
|
if (local->probe_port) {
|
|
/* according to the DP83840A specs the auto negotiation process
|
|
* may take up to 3.5 sec, so we use this also for our ML6692
|
|
* Fixme: Better to use a timer here!
|
|
*/
|
|
for (i=0; i < 35; i++) {
|
|
msleep(100); /* wait 100 msec */
|
|
status = mii_rd(ioaddr, 0, 1);
|
|
if ((status & 0x0020) && (status & 0x0004))
|
|
break;
|
|
}
|
|
|
|
if (!(status & 0x0020)) {
|
|
printk(KERN_INFO "%s: autonegotiation failed;"
|
|
" using 10mbs\n", dev->name);
|
|
if (!local->new_mii) {
|
|
control = 0x0000;
|
|
mii_wr(ioaddr, 0, 0, control, 16);
|
|
udelay(100);
|
|
SelectPage(0);
|
|
dev->if_port = (GetByte(XIRCREG_ESR) & MediaSelect) ? 1 : 2;
|
|
}
|
|
} else {
|
|
linkpartner = mii_rd(ioaddr, 0, 5);
|
|
printk(KERN_INFO "%s: MII link partner: %04x\n",
|
|
dev->name, linkpartner);
|
|
if (linkpartner & 0x0080) {
|
|
dev->if_port = 4;
|
|
} else
|
|
dev->if_port = 1;
|
|
}
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
do_powerdown(struct net_device *dev)
|
|
{
|
|
|
|
unsigned int ioaddr = dev->base_addr;
|
|
|
|
pr_debug("do_powerdown(%p)\n", dev);
|
|
|
|
SelectPage(4);
|
|
PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
|
|
SelectPage(0);
|
|
}
|
|
|
|
static int
|
|
do_stop(struct net_device *dev)
|
|
{
|
|
unsigned int ioaddr = dev->base_addr;
|
|
local_info_t *lp = netdev_priv(dev);
|
|
struct pcmcia_device *link = lp->p_dev;
|
|
|
|
dev_dbg(&link->dev, "do_stop(%p)\n", dev);
|
|
|
|
if (!link)
|
|
return -ENODEV;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
SelectPage(0);
|
|
PutByte(XIRCREG_CR, 0); /* disable interrupts */
|
|
SelectPage(0x01);
|
|
PutByte(XIRCREG1_IMR0, 0x00); /* forbid all ints */
|
|
SelectPage(4);
|
|
PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
|
|
SelectPage(0);
|
|
|
|
link->open--;
|
|
return 0;
|
|
}
|
|
|
|
static struct pcmcia_device_id xirc2ps_ids[] = {
|
|
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0089, 0x110a),
|
|
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0138, 0x110a),
|
|
PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
|
|
PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
|
|
PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
|
|
PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
|
|
PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
|
|
PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
|
|
PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
|
|
PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
|
|
PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),
|
|
PCMCIA_DEVICE_PROD_ID13("Xircom", "PS-CE2-10", 0x2e3ee845, 0x947d9073),
|
|
PCMCIA_DEVICE_PROD_ID13("Xircom", "R2E-100BTX", 0x2e3ee845, 0x2464a6e3),
|
|
PCMCIA_DEVICE_PROD_ID13("Xircom", "RE-10", 0x2e3ee845, 0x3e08d609),
|
|
PCMCIA_DEVICE_PROD_ID13("Xircom", "XE2000", 0x2e3ee845, 0xf7188e46),
|
|
PCMCIA_DEVICE_PROD_ID12("Compaq", "Ethernet LAN Card", 0x54f7c49c, 0x9fd2f0a2),
|
|
PCMCIA_DEVICE_PROD_ID12("Compaq", "Netelligent 10/100 PC Card", 0x54f7c49c, 0xefe96769),
|
|
PCMCIA_DEVICE_PROD_ID12("Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16", 0x816cc815, 0x174397db),
|
|
PCMCIA_DEVICE_PROD_ID12("Toshiba", "10/100 Ethernet PC Card", 0x44a09d9c, 0xb44deecf),
|
|
/* also matches CFE-10 cards! */
|
|
/* PCMCIA_DEVICE_MANF_CARD(0x0105, 0x010a), */
|
|
PCMCIA_DEVICE_NULL,
|
|
};
|
|
MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids);
|
|
|
|
|
|
static struct pcmcia_driver xirc2ps_cs_driver = {
|
|
.owner = THIS_MODULE,
|
|
.drv = {
|
|
.name = "xirc2ps_cs",
|
|
},
|
|
.probe = xirc2ps_probe,
|
|
.remove = xirc2ps_detach,
|
|
.id_table = xirc2ps_ids,
|
|
.suspend = xirc2ps_suspend,
|
|
.resume = xirc2ps_resume,
|
|
};
|
|
|
|
static int __init
|
|
init_xirc2ps_cs(void)
|
|
{
|
|
return pcmcia_register_driver(&xirc2ps_cs_driver);
|
|
}
|
|
|
|
static void __exit
|
|
exit_xirc2ps_cs(void)
|
|
{
|
|
pcmcia_unregister_driver(&xirc2ps_cs_driver);
|
|
}
|
|
|
|
module_init(init_xirc2ps_cs);
|
|
module_exit(exit_xirc2ps_cs);
|
|
|
|
#ifndef MODULE
|
|
static int __init setup_xirc2ps_cs(char *str)
|
|
{
|
|
/* if_port, full_duplex, do_sound, lockup_hack
|
|
*/
|
|
int ints[10] = { -1 };
|
|
|
|
str = get_options(str, 9, ints);
|
|
|
|
#define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; }
|
|
MAYBE_SET(if_port, 3);
|
|
MAYBE_SET(full_duplex, 4);
|
|
MAYBE_SET(do_sound, 5);
|
|
MAYBE_SET(lockup_hack, 6);
|
|
#undef MAYBE_SET
|
|
|
|
return 1;
|
|
}
|
|
|
|
__setup("xirc2ps_cs=", setup_xirc2ps_cs);
|
|
#endif
|