alistair23-linux/drivers/usb
Mathias Nyman 1208d8a84f xhci: Don't print a warning when setting link state for disabled ports
When disabling a USB3 port the hub driver will set the port link state to
U3 to prevent "ejected" or "safely removed" devices that are still
physically connected from immediately re-enumerating.

If the device was really unplugged, then error messages were printed
as the hub tries to set the U3 link state for a port that is no longer
enabled.

xhci-hcd ee000000.usb: Cannot set link state.
usb usb8-port1: cannot disable (err = -32)

Don't print error message in xhci-hub if hub tries to set port link state
for a disabled port. Return -ENODEV instead which also silences hub driver.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-15 18:36:19 +01:00
..
atm USB: atm: fix up some remaining DEVICE_ATTR() usage 2018-01-24 08:49:52 +01:00
c67x00
chipidea USB: move many drivers to use DEVICE_ATTR_WO 2018-01-24 08:49:52 +01:00
class vfs: do bulk POLL* -> EPOLL* replacement 2018-02-11 14:34:03 -08:00
common
core vfs: do bulk POLL* -> EPOLL* replacement 2018-02-11 14:34:03 -08:00
dwc2 usb: changes for v4.16 merge window 2018-01-08 14:03:30 +01:00
dwc3 phy: for 4.16 2018-01-08 14:17:59 +01:00
early
gadget vfs: do bulk POLL* -> EPOLL* replacement 2018-02-11 14:34:03 -08:00
host xhci: Don't print a warning when setting link state for disabled ports 2018-02-15 18:36:19 +01:00
image
isp1760
misc vfs: do bulk POLL* -> EPOLL* replacement 2018-02-11 14:34:03 -08:00
mon vfs: do bulk POLL* -> EPOLL* replacement 2018-02-11 14:34:03 -08:00
mtu3 usb: mtu3: fix semicolon.cocci warnings 2018-01-16 10:01:01 +01:00
musb USB: musb: fix up one odd DEVICE_ATTR() usage 2018-01-24 08:49:52 +01:00
phy USB: move many drivers to use DEVICE_ATTR_WO 2018-01-24 08:49:52 +01:00
renesas_usbhs usb: renesas_usbhs: Add support for RZ/A1 2018-01-09 16:18:50 +01:00
serial Driver Core updates for 4.16-rc1 2018-02-01 10:00:28 -08:00
storage USB: move many drivers to use DEVICE_ATTR_RO 2018-01-24 08:49:52 +01:00
typec Merge 4.15-rc4 into usb-next 2017-12-18 09:08:05 +01:00
usbip USB: move many drivers to use DEVICE_ATTR_WO 2018-01-24 08:49:52 +01:00
wusbcore
Kconfig
Makefile
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.