redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/mach-pxa/eseries.c
Laura Abbott 1c2f87c225 ARM: 8025/1: Get rid of meminfo 
memblock is now fully integrated into the kernel and is the prefered
method for tracking memory. Rather than reinvent the wheel with
meminfo, migrate to using memblock directly instead of meminfo as
an intermediate.

Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-01 01:17:12 +01:00

983 lines
24 KiB
C
Raw Blame History

/*
* Hardware definitions for the Toshiba eseries PDAs
*
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/mfd/tc6387xb.h>
#include <linux/mfd/tc6393xb.h>
#include <linux/mfd/t7l66xb.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/memblock.h>
#include <video/w100fb.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/eseries-irq.h>
#include <mach/audio.h>
#include <linux/platform_data/video-pxafb.h>
#include <mach/udc.h>
#include <linux/platform_data/irda-pxaficp.h>
#include "devices.h"
#include "generic.h"
#include "clock.h"
/* Only e800 has 128MB RAM */
void __init eseries_fixup(struct tag *tags, char **cmdline)
{
if (machine_is_e800())
memblock_add(0xa0000000, SZ_128M);
else
memblock_add(0xa0000000, SZ_64M);
}
struct gpio_vbus_mach_info e7xx_udc_info = {
.gpio_vbus = GPIO_E7XX_USB_DISC,
.gpio_pullup = GPIO_E7XX_USB_PULLUP,
.gpio_pullup_inverted = 1
};
static struct platform_device e7xx_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
.dev = {
.platform_data = &e7xx_udc_info,
},
};
struct pxaficp_platform_data e7xx_ficp_platform_data = {
.gpio_pwdown = GPIO_E7XX_IR_OFF,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
int eseries_tmio_enable(struct platform_device *dev)
{
/* Reset - bring SUSPEND high before PCLR */
gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
msleep(1);
gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
msleep(1);
gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
msleep(1);
return 0;
}
int eseries_tmio_disable(struct platform_device *dev)
{
gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
return 0;
}
int eseries_tmio_suspend(struct platform_device *dev)
{
gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
return 0;
}
int eseries_tmio_resume(struct platform_device *dev)
{
gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
msleep(1);
return 0;
}
void eseries_get_tmio_gpios(void)
{
gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
}
/* TMIO controller uses the same resources on all e-series machines. */
struct resource eseries_tmio_resources[] = {
[0] = {
.start = PXA_CS4_PHYS,
.end = PXA_CS4_PHYS + 0x1fffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
.end = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
.flags = IORESOURCE_IRQ,
},
};
/* Some e-series hardware cannot control the 32K clock */
static void clk_32k_dummy(struct clk *clk)
{
}
static const struct clkops clk_32k_dummy_ops = {
.enable = clk_32k_dummy,
.disable = clk_32k_dummy,
};
static struct clk tmio_dummy_clk = {
.ops = &clk_32k_dummy_ops,
.rate = 32768,
};
static struct clk_lookup eseries_clkregs[] = {
INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
};
static void __init eseries_register_clks(void)
{
clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
}
#ifdef CONFIG_MACH_E330
/* -------------------- e330 tc6387xb parameters -------------------- */
static struct tc6387xb_platform_data e330_tc6387xb_info = {
.enable = &eseries_tmio_enable,
.disable = &eseries_tmio_disable,
.suspend = &eseries_tmio_suspend,
.resume = &eseries_tmio_resume,
};
static struct platform_device e330_tc6387xb_device = {
.name = "tc6387xb",
.id = -1,
.dev = {
.platform_data = &e330_tc6387xb_info,
},
.num_resources = 2,
.resource = eseries_tmio_resources,
};
/* --------------------------------------------------------------- */
static struct platform_device *e330_devices[] __initdata = {
&e330_tc6387xb_device,
&e7xx_gpio_vbus,
};
static void __init e330_init(void)
{
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
eseries_register_clks();
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e330_devices));
}
MACHINE_START(E330, "Toshiba e330")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e330_init,
.init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E350
/* -------------------- e350 t7l66xb parameters -------------------- */
static struct t7l66xb_platform_data e350_t7l66xb_info = {
.irq_base = IRQ_BOARD_START,
.enable = &eseries_tmio_enable,
.suspend = &eseries_tmio_suspend,
.resume = &eseries_tmio_resume,
};
static struct platform_device e350_t7l66xb_device = {
.name = "t7l66xb",
.id = -1,
.dev = {
.platform_data = &e350_t7l66xb_info,
},
.num_resources = 2,
.resource = eseries_tmio_resources,
};
/* ---------------------------------------------------------- */
static struct platform_device *e350_devices[] __initdata = {
&e350_t7l66xb_device,
&e7xx_gpio_vbus,
};
static void __init e350_init(void)
{
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
eseries_register_clks();
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e350_devices));
}
MACHINE_START(E350, "Toshiba e350")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e350_init,
.init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E400
/* ------------------------ E400 LCD definitions ------------------------ */
static struct pxafb_mode_info e400_pxafb_mode_info = {
.pixclock = 140703,
.xres = 240,
.yres = 320,
.bpp = 16,
.hsync_len = 4,
.left_margin = 28,
.right_margin = 8,
.vsync_len = 3,
.upper_margin = 5,
.lower_margin = 6,
.sync = 0,
};
static struct pxafb_mach_info e400_pxafb_mach_info = {
.modes = &e400_pxafb_mode_info,
.num_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP,
.lccr3 = 0,
.pxafb_backlight_power = NULL,
};
/* ------------------------ E400 MFP config ----------------------------- */
static unsigned long e400_pin_config[] __initdata = {
/* Chip selects */
GPIO15_nCS_1, /* CS1 - Flash */
GPIO80_nCS_4, /* CS4 - TMIO */
/* Clocks */
GPIO12_32KHz,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
/* TMIO controller */
GPIO19_GPIO, /* t7l66xb #PCLR */
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
/* wakeup */
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
};
/* ---------------------------------------------------------------------- */
static struct mtd_partition partition_a = {
.name = "Internal NAND flash",
.offset = 0,
.size = MTDPART_SIZ_FULL,
};
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
.options = 0,
.offs = 4,
.len = 2,
.pattern = scan_ff_pattern
};
static struct tmio_nand_data e400_t7l66xb_nand_config = {
.num_partitions = 1,
.partition = &partition_a,
.badblock_pattern = &e400_t7l66xb_nand_bbt,
};
static struct t7l66xb_platform_data e400_t7l66xb_info = {
.irq_base = IRQ_BOARD_START,
.enable = &eseries_tmio_enable,
.suspend = &eseries_tmio_suspend,
.resume = &eseries_tmio_resume,
.nand_data = &e400_t7l66xb_nand_config,
};
static struct platform_device e400_t7l66xb_device = {
.name = "t7l66xb",
.id = -1,
.dev = {
.platform_data = &e400_t7l66xb_info,
},
.num_resources = 2,
.resource = eseries_tmio_resources,
};
/* ---------------------------------------------------------- */
static struct platform_device *e400_devices[] __initdata = {
&e400_t7l66xb_device,
&e7xx_gpio_vbus,
};
static void __init e400_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
/* Fixme - e400 may have a switched clock */
eseries_register_clks();
eseries_get_tmio_gpios();
pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
platform_add_devices(ARRAY_AND_SIZE(e400_devices));
}
MACHINE_START(E400, "Toshiba e400")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e400_init,
.init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E740
/* ------------------------ e740 video support --------------------------- */
static struct w100_gen_regs e740_lcd_regs = {
.lcd_format = 0x00008023,
.lcdd_cntl1 = 0x0f000000,
.lcdd_cntl2 = 0x0003ffff,
.genlcd_cntl1 = 0x00ffff03,
.genlcd_cntl2 = 0x003c0f03,
.genlcd_cntl3 = 0x000143aa,
};
static struct w100_mode e740_lcd_mode = {
.xres = 240,
.yres = 320,
.left_margin = 20,
.right_margin = 28,
.upper_margin = 9,
.lower_margin = 8,
.crtc_ss = 0x80140013,
.crtc_ls = 0x81150110,
.crtc_gs = 0x80050005,
.crtc_vpos_gs = 0x000a0009,
.crtc_rev = 0x0040010a,
.crtc_dclk = 0xa906000a,
.crtc_gclk = 0x80050108,
.crtc_goe = 0x80050108,
.pll_freq = 57,
.pixclk_divider = 4,
.pixclk_divider_rotated = 4,
.pixclk_src = CLK_SRC_XTAL,
.sysclk_divider = 1,
.sysclk_src = CLK_SRC_PLL,
.crtc_ps1_active = 0x41060010,
};
static struct w100_gpio_regs e740_w100_gpio_info = {
.init_data1 = 0x21002103,
.gpio_dir1 = 0xffffdeff,
.gpio_oe1 = 0x03c00643,
.init_data2 = 0x003f003f,
.gpio_dir2 = 0xffffffff,
.gpio_oe2 = 0x000000ff,
};
static struct w100fb_mach_info e740_fb_info = {
.modelist = &e740_lcd_mode,
.num_modes = 1,
.regs = &e740_lcd_regs,
.gpio = &e740_w100_gpio_info,
.xtal_freq = 14318000,
.xtal_dbl = 1,
};
static struct resource e740_fb_resources[] = {
[0] = {
.start = 0x0c000000,
.end = 0x0cffffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device e740_fb_device = {
.name = "w100fb",
.id = -1,
.dev = {
.platform_data = &e740_fb_info,
},
.num_resources = ARRAY_SIZE(e740_fb_resources),
.resource = e740_fb_resources,
};
/* --------------------------- MFP Pin config -------------------------- */
static unsigned long e740_pin_config[] __initdata = {
/* Chip selects */
GPIO15_nCS_1, /* CS1 - Flash */
GPIO79_nCS_3, /* CS3 - IMAGEON */
GPIO80_nCS_4, /* CS4 - TMIO */
/* Clocks */
GPIO12_32KHz,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
/* TMIO controller */
GPIO19_GPIO, /* t7l66xb #PCLR */
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
/* UDC */
GPIO13_GPIO,
GPIO3_GPIO,
/* IrDA */
GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
/* Audio power control */
GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */
GPIO40_GPIO, /* Mic amp power */
GPIO41_GPIO, /* Headphone amp power */
/* PC Card */
GPIO8_GPIO, /* CD0 */
GPIO44_GPIO, /* CD1 */
GPIO11_GPIO, /* IRQ0 */
GPIO6_GPIO, /* IRQ1 */
GPIO27_GPIO, /* RST0 */
GPIO24_GPIO, /* RST1 */
GPIO20_GPIO, /* PWR0 */
GPIO23_GPIO, /* PWR1 */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO52_nPCE_1,
GPIO53_nPCE_2,
GPIO54_nPSKTSEL,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
/* wakeup */
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
};
/* -------------------- e740 t7l66xb parameters -------------------- */
static struct t7l66xb_platform_data e740_t7l66xb_info = {
.irq_base = IRQ_BOARD_START,
.enable = &eseries_tmio_enable,
.suspend = &eseries_tmio_suspend,
.resume = &eseries_tmio_resume,
};
static struct platform_device e740_t7l66xb_device = {
.name = "t7l66xb",
.id = -1,
.dev = {
.platform_data = &e740_t7l66xb_info,
},
.num_resources = 2,
.resource = eseries_tmio_resources,
};
static struct platform_device e740_audio_device = {
.name = "e740-audio",
.id = -1,
};
/* ----------------------------------------------------------------------- */
static struct platform_device *e740_devices[] __initdata = {
&e740_fb_device,
&e740_t7l66xb_device,
&e7xx_gpio_vbus,
&e740_audio_device,
};
static void __init e740_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
eseries_register_clks();
clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
"UDCCLK", &pxa25x_device_udc.dev),
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e740_devices));
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
MACHINE_START(E740, "Toshiba e740")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e740_init,
.init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E750
/* ---------------------- E750 LCD definitions -------------------- */
static struct w100_gen_regs e750_lcd_regs = {
.lcd_format = 0x00008003,
.lcdd_cntl1 = 0x00000000,
.lcdd_cntl2 = 0x0003ffff,
.genlcd_cntl1 = 0x00fff003,
.genlcd_cntl2 = 0x003c0f03,
.genlcd_cntl3 = 0x000143aa,
};
static struct w100_mode e750_lcd_mode = {
.xres = 240,
.yres = 320,
.left_margin = 21,
.right_margin = 22,
.upper_margin = 5,
.lower_margin = 4,
.crtc_ss = 0x80150014,
.crtc_ls = 0x8014000d,
.crtc_gs = 0xc1000005,
.crtc_vpos_gs = 0x00020147,
.crtc_rev = 0x0040010a,
.crtc_dclk = 0xa1700030,
.crtc_gclk = 0x80cc0015,
.crtc_goe = 0x80cc0015,
.crtc_ps1_active = 0x61060017,
.pll_freq = 57,
.pixclk_divider = 4,
.pixclk_divider_rotated = 4,
.pixclk_src = CLK_SRC_XTAL,
.sysclk_divider = 1,
.sysclk_src = CLK_SRC_PLL,
};
static struct w100_gpio_regs e750_w100_gpio_info = {
.init_data1 = 0x01192f1b,
.gpio_dir1 = 0xd5ffdeff,
.gpio_oe1 = 0x000020bf,
.init_data2 = 0x010f010f,
.gpio_dir2 = 0xffffffff,
.gpio_oe2 = 0x000001cf,
};
static struct w100fb_mach_info e750_fb_info = {
.modelist = &e750_lcd_mode,
.num_modes = 1,
.regs = &e750_lcd_regs,
.gpio = &e750_w100_gpio_info,
.xtal_freq = 14318000,
.xtal_dbl = 1,
};
static struct resource e750_fb_resources[] = {
[0] = {
.start = 0x0c000000,
.end = 0x0cffffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device e750_fb_device = {
.name = "w100fb",
.id = -1,
.dev = {
.platform_data = &e750_fb_info,
},
.num_resources = ARRAY_SIZE(e750_fb_resources),
.resource = e750_fb_resources,
};
/* -------------------- e750 MFP parameters -------------------- */
static unsigned long e750_pin_config[] __initdata = {
/* Chip selects */
GPIO15_nCS_1, /* CS1 - Flash */
GPIO79_nCS_3, /* CS3 - IMAGEON */
GPIO80_nCS_4, /* CS4 - TMIO */
/* Clocks */
GPIO11_3_6MHz,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
/* TMIO controller */
GPIO19_GPIO, /* t7l66xb #PCLR */
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
/* UDC */
GPIO13_GPIO,
GPIO3_GPIO,
/* IrDA */
GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
/* Audio power control */
GPIO4_GPIO, /* Headphone amp power */
GPIO7_GPIO, /* Speaker amp power */
GPIO37_GPIO, /* Headphone detect */
/* PC Card */
GPIO8_GPIO, /* CD0 */
GPIO44_GPIO, /* CD1 */
GPIO11_GPIO, /* IRQ0 */
GPIO6_GPIO, /* IRQ1 */
GPIO27_GPIO, /* RST0 */
GPIO24_GPIO, /* RST1 */
GPIO20_GPIO, /* PWR0 */
GPIO23_GPIO, /* PWR1 */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO52_nPCE_1,
GPIO53_nPCE_2,
GPIO54_nPSKTSEL,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
/* wakeup */
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
};
/* ----------------- e750 tc6393xb parameters ------------------ */
static struct tc6393xb_platform_data e750_tc6393xb_info = {
.irq_base = IRQ_BOARD_START,
.scr_pll2cr = 0x0cc1,
.scr_gper = 0,
.gpio_base = -1,
.suspend = &eseries_tmio_suspend,
.resume = &eseries_tmio_resume,
.enable = &eseries_tmio_enable,
.disable = &eseries_tmio_disable,
};
static struct platform_device e750_tc6393xb_device = {
.name = "tc6393xb",
.id = -1,
.dev = {
.platform_data = &e750_tc6393xb_info,
},
.num_resources = 2,
.resource = eseries_tmio_resources,
};
static struct platform_device e750_audio_device = {
.name = "e750-audio",
.id = -1,
};
/* ------------------------------------------------------------- */
static struct platform_device *e750_devices[] __initdata = {
&e750_fb_device,
&e750_tc6393xb_device,
&e7xx_gpio_vbus,
&e750_audio_device,
};
static void __init e750_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e750_devices));
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
MACHINE_START(E750, "Toshiba e750")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e750_init,
.init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E800
/* ------------------------ e800 LCD definitions ------------------------- */
static unsigned long e800_pin_config[] __initdata = {
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
};
static struct w100_gen_regs e800_lcd_regs = {
.lcd_format = 0x00008003,
.lcdd_cntl1 = 0x02a00000,
.lcdd_cntl2 = 0x0003ffff,
.genlcd_cntl1 = 0x000ff2a3,
.genlcd_cntl2 = 0x000002a3,
.genlcd_cntl3 = 0x000102aa,
};
static struct w100_mode e800_lcd_mode[2] = {
[0] = {
.xres = 480,
.yres = 640,
.left_margin = 52,
.right_margin = 148,
.upper_margin = 2,
.lower_margin = 6,
.crtc_ss = 0x80350034,
.crtc_ls = 0x802b0026,
.crtc_gs = 0x80160016,
.crtc_vpos_gs = 0x00020003,
.crtc_rev = 0x0040001d,
.crtc_dclk = 0xe0000000,
.crtc_gclk = 0x82a50049,
.crtc_goe = 0x80ee001c,
.crtc_ps1_active = 0x00000000,
.pll_freq = 128,
.pixclk_divider = 4,
.pixclk_divider_rotated = 6,
.pixclk_src = CLK_SRC_PLL,
.sysclk_divider = 0,
.sysclk_src = CLK_SRC_PLL,
},
[1] = {
.xres = 240,
.yres = 320,
.left_margin = 15,
.right_margin = 88,
.upper_margin = 0,
.lower_margin = 7,
.crtc_ss = 0xd010000f,
.crtc_ls = 0x80070003,
.crtc_gs = 0x80000000,
.crtc_vpos_gs = 0x01460147,
.crtc_rev = 0x00400003,
.crtc_dclk = 0xa1700030,
.crtc_gclk = 0x814b0008,
.crtc_goe = 0x80cc0015,
.crtc_ps1_active = 0x00000000,
.pll_freq = 100,
.pixclk_divider = 6, /* Wince uses 14 which gives a */
.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
.pixclk_src = CLK_SRC_PLL,
.sysclk_divider = 0,
.sysclk_src = CLK_SRC_PLL,
}
};
static struct w100_gpio_regs e800_w100_gpio_info = {
.init_data1 = 0xc13fc019,
.gpio_dir1 = 0x3e40df7f,
.gpio_oe1 = 0x003c3000,
.init_data2 = 0x00000000,
.gpio_dir2 = 0x00000000,
.gpio_oe2 = 0x00000000,
};
static struct w100_mem_info e800_w100_mem_info = {
.ext_cntl = 0x09640011,
.sdram_mode_reg = 0x00600021,
.ext_timing_cntl = 0x10001545,
.io_cntl = 0x7ddd7333,
.size = 0x1fffff,
};
static void e800_tg_change(struct w100fb_par *par)
{
unsigned long tmp;
tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
if (par->mode->xres == 480)
tmp |= 0x100;
else
tmp &= ~0x100;
w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
}
static struct w100_tg_info e800_tg_info = {
.change = e800_tg_change,
};
static struct w100fb_mach_info e800_fb_info = {
.modelist = e800_lcd_mode,
.num_modes = 2,
.regs = &e800_lcd_regs,
.gpio = &e800_w100_gpio_info,
.mem = &e800_w100_mem_info,
.tg = &e800_tg_info,
.xtal_freq = 16000000,
};
static struct resource e800_fb_resources[] = {
[0] = {
.start = 0x0c000000,
.end = 0x0cffffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device e800_fb_device = {
.name = "w100fb",
.id = -1,
.dev = {
.platform_data = &e800_fb_info,
},
.num_resources = ARRAY_SIZE(e800_fb_resources),
.resource = e800_fb_resources,
};
/* --------------------------- UDC definitions --------------------------- */
static struct gpio_vbus_mach_info e800_udc_info = {
.gpio_vbus = GPIO_E800_USB_DISC,
.gpio_pullup = GPIO_E800_USB_PULLUP,
.gpio_pullup_inverted = 1
};
static struct platform_device e800_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
.dev = {
.platform_data = &e800_udc_info,
},
};
/* ----------------- e800 tc6393xb parameters ------------------ */
static struct tc6393xb_platform_data e800_tc6393xb_info = {
.irq_base = IRQ_BOARD_START,
.scr_pll2cr = 0x0cc1,
.scr_gper = 0,
.gpio_base = -1,
.suspend = &eseries_tmio_suspend,
.resume = &eseries_tmio_resume,
.enable = &eseries_tmio_enable,
.disable = &eseries_tmio_disable,
};
static struct platform_device e800_tc6393xb_device = {
.name = "tc6393xb",
.id = -1,
.dev = {
.platform_data = &e800_tc6393xb_info,
},
.num_resources = 2,
.resource = eseries_tmio_resources,
};
static struct platform_device e800_audio_device = {
.name = "e800-audio",
.id = -1,
};
/* ----------------------------------------------------------------------- */
static struct platform_device *e800_devices[] __initdata = {
&e800_fb_device,
&e800_tc6393xb_device,
&e800_gpio_vbus,
&e800_audio_device,
};
static void __init e800_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
platform_add_devices(ARRAY_AND_SIZE(e800_devices));
pxa_set_ac97_info(NULL);
}
MACHINE_START(E800, "Toshiba e800")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.fixup = eseries_fixup,
.init_machine = e800_init,
.init_time = pxa_timer_init,
.restart = pxa_restart,
MACHINE_END
#endif
View git blame Copy permalink