e982e3f020
The DSI devices have a maximum operating frequency specified in their data sheet per the MIPI specification, and DSI hosts that can scale their frequency need this information to set their clock dividers right. As current panel drivers often lack this information, specify that setting it to zero will make the DSI host use some reasonable default. Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181023072422.25754-1-linus.walleij@linaro.org
328 lines
10 KiB
C
328 lines
10 KiB
C
/*
|
|
* MIPI DSI Bus
|
|
*
|
|
* Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd.
|
|
* Andrzej Hajda <a.hajda@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef __DRM_MIPI_DSI_H__
|
|
#define __DRM_MIPI_DSI_H__
|
|
|
|
#include <linux/device.h>
|
|
|
|
struct mipi_dsi_host;
|
|
struct mipi_dsi_device;
|
|
|
|
/* request ACK from peripheral */
|
|
#define MIPI_DSI_MSG_REQ_ACK BIT(0)
|
|
/* use Low Power Mode to transmit message */
|
|
#define MIPI_DSI_MSG_USE_LPM BIT(1)
|
|
|
|
/**
|
|
* struct mipi_dsi_msg - read/write DSI buffer
|
|
* @channel: virtual channel id
|
|
* @type: payload data type
|
|
* @flags: flags controlling this message transmission
|
|
* @tx_len: length of @tx_buf
|
|
* @tx_buf: data to be written
|
|
* @rx_len: length of @rx_buf
|
|
* @rx_buf: data to be read, or NULL
|
|
*/
|
|
struct mipi_dsi_msg {
|
|
u8 channel;
|
|
u8 type;
|
|
u16 flags;
|
|
|
|
size_t tx_len;
|
|
const void *tx_buf;
|
|
|
|
size_t rx_len;
|
|
void *rx_buf;
|
|
};
|
|
|
|
bool mipi_dsi_packet_format_is_short(u8 type);
|
|
bool mipi_dsi_packet_format_is_long(u8 type);
|
|
|
|
/**
|
|
* struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
|
|
* @size: size (in bytes) of the packet
|
|
* @header: the four bytes that make up the header (Data ID, Word Count or
|
|
* Packet Data, and ECC)
|
|
* @payload_length: number of bytes in the payload
|
|
* @payload: a pointer to a buffer containing the payload, if any
|
|
*/
|
|
struct mipi_dsi_packet {
|
|
size_t size;
|
|
u8 header[4];
|
|
size_t payload_length;
|
|
const u8 *payload;
|
|
};
|
|
|
|
int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
|
|
const struct mipi_dsi_msg *msg);
|
|
|
|
/**
|
|
* struct mipi_dsi_host_ops - DSI bus operations
|
|
* @attach: attach DSI device to DSI host
|
|
* @detach: detach DSI device from DSI host
|
|
* @transfer: transmit a DSI packet
|
|
*
|
|
* DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg
|
|
* structures. This structure contains information about the type of packet
|
|
* being transmitted as well as the transmit and receive buffers. When an
|
|
* error is encountered during transmission, this function will return a
|
|
* negative error code. On success it shall return the number of bytes
|
|
* transmitted for write packets or the number of bytes received for read
|
|
* packets.
|
|
*
|
|
* Note that typically DSI packet transmission is atomic, so the .transfer()
|
|
* function will seldomly return anything other than the number of bytes
|
|
* contained in the transmit buffer on success.
|
|
*/
|
|
struct mipi_dsi_host_ops {
|
|
int (*attach)(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *dsi);
|
|
int (*detach)(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *dsi);
|
|
ssize_t (*transfer)(struct mipi_dsi_host *host,
|
|
const struct mipi_dsi_msg *msg);
|
|
};
|
|
|
|
/**
|
|
* struct mipi_dsi_host - DSI host device
|
|
* @dev: driver model device node for this DSI host
|
|
* @ops: DSI host operations
|
|
* @list: list management
|
|
*/
|
|
struct mipi_dsi_host {
|
|
struct device *dev;
|
|
const struct mipi_dsi_host_ops *ops;
|
|
struct list_head list;
|
|
};
|
|
|
|
int mipi_dsi_host_register(struct mipi_dsi_host *host);
|
|
void mipi_dsi_host_unregister(struct mipi_dsi_host *host);
|
|
struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node);
|
|
|
|
/* DSI mode flags */
|
|
|
|
/* video mode */
|
|
#define MIPI_DSI_MODE_VIDEO BIT(0)
|
|
/* video burst mode */
|
|
#define MIPI_DSI_MODE_VIDEO_BURST BIT(1)
|
|
/* video pulse mode */
|
|
#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2)
|
|
/* enable auto vertical count mode */
|
|
#define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3)
|
|
/* enable hsync-end packets in vsync-pulse and v-porch area */
|
|
#define MIPI_DSI_MODE_VIDEO_HSE BIT(4)
|
|
/* disable hfront-porch area */
|
|
#define MIPI_DSI_MODE_VIDEO_HFP BIT(5)
|
|
/* disable hback-porch area */
|
|
#define MIPI_DSI_MODE_VIDEO_HBP BIT(6)
|
|
/* disable hsync-active area */
|
|
#define MIPI_DSI_MODE_VIDEO_HSA BIT(7)
|
|
/* flush display FIFO on vsync pulse */
|
|
#define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8)
|
|
/* disable EoT packets in HS mode */
|
|
#define MIPI_DSI_MODE_EOT_PACKET BIT(9)
|
|
/* device supports non-continuous clock behavior (DSI spec 5.6.1) */
|
|
#define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10)
|
|
/* transmit data in low power */
|
|
#define MIPI_DSI_MODE_LPM BIT(11)
|
|
|
|
enum mipi_dsi_pixel_format {
|
|
MIPI_DSI_FMT_RGB888,
|
|
MIPI_DSI_FMT_RGB666,
|
|
MIPI_DSI_FMT_RGB666_PACKED,
|
|
MIPI_DSI_FMT_RGB565,
|
|
};
|
|
|
|
#define DSI_DEV_NAME_SIZE 20
|
|
|
|
/**
|
|
* struct mipi_dsi_device_info - template for creating a mipi_dsi_device
|
|
* @type: DSI peripheral chip type
|
|
* @channel: DSI virtual channel assigned to peripheral
|
|
* @node: pointer to OF device node or NULL
|
|
*
|
|
* This is populated and passed to mipi_dsi_device_new to create a new
|
|
* DSI device
|
|
*/
|
|
struct mipi_dsi_device_info {
|
|
char type[DSI_DEV_NAME_SIZE];
|
|
u32 channel;
|
|
struct device_node *node;
|
|
};
|
|
|
|
/**
|
|
* struct mipi_dsi_device - DSI peripheral device
|
|
* @host: DSI host for this peripheral
|
|
* @dev: driver model device node for this peripheral
|
|
* @name: DSI peripheral chip type
|
|
* @channel: virtual channel assigned to the peripheral
|
|
* @format: pixel format for video mode
|
|
* @lanes: number of active data lanes
|
|
* @mode_flags: DSI operation mode related flags
|
|
* @hs_rate: maximum lane frequency for high speed mode in hertz, this should
|
|
* be set to the real limits of the hardware, zero is only accepted for
|
|
* legacy drivers
|
|
* @lp_rate: maximum lane frequency for low power mode in hertz, this should
|
|
* be set to the real limits of the hardware, zero is only accepted for
|
|
* legacy drivers
|
|
*/
|
|
struct mipi_dsi_device {
|
|
struct mipi_dsi_host *host;
|
|
struct device dev;
|
|
|
|
char name[DSI_DEV_NAME_SIZE];
|
|
unsigned int channel;
|
|
unsigned int lanes;
|
|
enum mipi_dsi_pixel_format format;
|
|
unsigned long mode_flags;
|
|
unsigned long hs_rate;
|
|
unsigned long lp_rate;
|
|
};
|
|
|
|
#define MIPI_DSI_MODULE_PREFIX "mipi-dsi:"
|
|
|
|
static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev)
|
|
{
|
|
return container_of(dev, struct mipi_dsi_device, dev);
|
|
}
|
|
|
|
/**
|
|
* mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any
|
|
* given pixel format defined by the MIPI DSI
|
|
* specification
|
|
* @fmt: MIPI DSI pixel format
|
|
*
|
|
* Returns: The number of bits per pixel of the given pixel format.
|
|
*/
|
|
static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
|
|
{
|
|
switch (fmt) {
|
|
case MIPI_DSI_FMT_RGB888:
|
|
case MIPI_DSI_FMT_RGB666:
|
|
return 24;
|
|
|
|
case MIPI_DSI_FMT_RGB666_PACKED:
|
|
return 18;
|
|
|
|
case MIPI_DSI_FMT_RGB565:
|
|
return 16;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
struct mipi_dsi_device *
|
|
mipi_dsi_device_register_full(struct mipi_dsi_host *host,
|
|
const struct mipi_dsi_device_info *info);
|
|
void mipi_dsi_device_unregister(struct mipi_dsi_device *dsi);
|
|
struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np);
|
|
int mipi_dsi_attach(struct mipi_dsi_device *dsi);
|
|
int mipi_dsi_detach(struct mipi_dsi_device *dsi);
|
|
int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi);
|
|
int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi);
|
|
int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
|
|
u16 value);
|
|
|
|
ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload,
|
|
size_t size);
|
|
ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params,
|
|
size_t num_params, void *data, size_t size);
|
|
|
|
/**
|
|
* enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode
|
|
* @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking
|
|
* information only
|
|
* @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both
|
|
* V-Blanking and H-Blanking information
|
|
*/
|
|
enum mipi_dsi_dcs_tear_mode {
|
|
MIPI_DSI_DCS_TEAR_MODE_VBLANK,
|
|
MIPI_DSI_DCS_TEAR_MODE_VHBLANK,
|
|
};
|
|
|
|
#define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2)
|
|
#define MIPI_DSI_DCS_POWER_MODE_NORMAL (1 << 3)
|
|
#define MIPI_DSI_DCS_POWER_MODE_SLEEP (1 << 4)
|
|
#define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5)
|
|
#define MIPI_DSI_DCS_POWER_MODE_IDLE (1 << 6)
|
|
|
|
ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
|
|
const void *data, size_t len);
|
|
ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
|
|
const void *data, size_t len);
|
|
ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
|
|
size_t len);
|
|
int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi);
|
|
int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi);
|
|
int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode);
|
|
int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format);
|
|
int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi);
|
|
int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi);
|
|
int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi);
|
|
int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi);
|
|
int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
|
|
u16 end);
|
|
int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
|
|
u16 end);
|
|
int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
|
|
int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
|
|
enum mipi_dsi_dcs_tear_mode mode);
|
|
int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
|
|
int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline);
|
|
int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi,
|
|
u16 brightness);
|
|
int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi,
|
|
u16 *brightness);
|
|
|
|
/**
|
|
* struct mipi_dsi_driver - DSI driver
|
|
* @driver: device driver model driver
|
|
* @probe: callback for device binding
|
|
* @remove: callback for device unbinding
|
|
* @shutdown: called at shutdown time to quiesce the device
|
|
*/
|
|
struct mipi_dsi_driver {
|
|
struct device_driver driver;
|
|
int(*probe)(struct mipi_dsi_device *dsi);
|
|
int(*remove)(struct mipi_dsi_device *dsi);
|
|
void (*shutdown)(struct mipi_dsi_device *dsi);
|
|
};
|
|
|
|
static inline struct mipi_dsi_driver *
|
|
to_mipi_dsi_driver(struct device_driver *driver)
|
|
{
|
|
return container_of(driver, struct mipi_dsi_driver, driver);
|
|
}
|
|
|
|
static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device *dsi)
|
|
{
|
|
return dev_get_drvdata(&dsi->dev);
|
|
}
|
|
|
|
static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data)
|
|
{
|
|
dev_set_drvdata(&dsi->dev, data);
|
|
}
|
|
|
|
int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver,
|
|
struct module *owner);
|
|
void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver);
|
|
|
|
#define mipi_dsi_driver_register(driver) \
|
|
mipi_dsi_driver_register_full(driver, THIS_MODULE)
|
|
|
|
#define module_mipi_dsi_driver(__mipi_dsi_driver) \
|
|
module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \
|
|
mipi_dsi_driver_unregister)
|
|
|
|
#endif /* __DRM_MIPI_DSI__ */
|