![Biju Das](/assets/img/avatar_default.png)
Add needed information inside CPU0 for the generic cpufreq-cpu0 driver. - clock-latency = 300 us Approximate worst-case latency to do clock transition for every OPPs. Using an arbitrary safe value similar to r8a7791(R-Car M2) Soc. - operating-points = < kHz - uV > List of 6 operating points. All of them are using the same voltage since DVS is not supported in RZ/G1 Soc. Note:This also fixes the below errors seen on kernel logs [ 0.876877] cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19) [ 0.883727] cpu cpu1: cpufreq_init: failed to get clk: -2 Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
807 lines
23 KiB
Plaintext
807 lines
23 KiB
Plaintext
/*
|
|
* Device Tree Source for the r8a7743 SoC
|
|
*
|
|
* Copyright (C) 2016-2017 Cogent Embedded Inc.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/r8a7743-cpg-mssr.h>
|
|
#include <dt-bindings/power/r8a7743-sysc.h>
|
|
|
|
/ {
|
|
compatible = "renesas,r8a7743";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
i2c3 = &i2c3;
|
|
i2c4 = &i2c4;
|
|
i2c5 = &i2c5;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "renesas,apmu";
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0>;
|
|
clock-frequency = <1500000000>;
|
|
clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
|
|
clock-latency = <300000>; /* 300 us */
|
|
power-domains = <&sysc R8A7743_PD_CA15_CPU0>;
|
|
next-level-cache = <&L2_CA15>;
|
|
|
|
/* kHz - uV - OPPs unknown yet */
|
|
operating-points = <1500000 1000000>,
|
|
<1312500 1000000>,
|
|
<1125000 1000000>,
|
|
< 937500 1000000>,
|
|
< 750000 1000000>,
|
|
< 375000 1000000>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <1>;
|
|
clock-frequency = <1500000000>;
|
|
power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
|
|
next-level-cache = <&L2_CA15>;
|
|
};
|
|
|
|
L2_CA15: cache-controller-0 {
|
|
compatible = "cache";
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
power-domains = <&sysc R8A7743_PD_CA15_SCU>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&gic>;
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
apmu@e6152000 {
|
|
compatible = "renesas,r8a7743-apmu", "renesas,apmu";
|
|
reg = <0 0xe6152000 0 0x188>;
|
|
cpus = <&cpu0 &cpu1>;
|
|
};
|
|
|
|
gic: interrupt-controller@f1001000 {
|
|
compatible = "arm,gic-400";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
interrupt-controller;
|
|
reg = <0 0xf1001000 0 0x1000>,
|
|
<0 0xf1002000 0 0x2000>,
|
|
<0 0xf1004000 0 0x2000>,
|
|
<0 0xf1006000 0 0x2000>;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_HIGH)>;
|
|
clocks = <&cpg CPG_MOD 408>;
|
|
clock-names = "clk";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 408>;
|
|
};
|
|
|
|
gpio0: gpio@e6050000 {
|
|
compatible = "renesas,gpio-r8a7743",
|
|
"renesas,gpio-rcar";
|
|
reg = <0 0xe6050000 0 0x50>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 0 32>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&cpg CPG_MOD 912>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 912>;
|
|
};
|
|
|
|
gpio1: gpio@e6051000 {
|
|
compatible = "renesas,gpio-r8a7743",
|
|
"renesas,gpio-rcar";
|
|
reg = <0 0xe6051000 0 0x50>;
|
|
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 32 26>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&cpg CPG_MOD 911>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 911>;
|
|
};
|
|
|
|
gpio2: gpio@e6052000 {
|
|
compatible = "renesas,gpio-r8a7743",
|
|
"renesas,gpio-rcar";
|
|
reg = <0 0xe6052000 0 0x50>;
|
|
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 64 32>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&cpg CPG_MOD 910>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 910>;
|
|
};
|
|
|
|
gpio3: gpio@e6053000 {
|
|
compatible = "renesas,gpio-r8a7743",
|
|
"renesas,gpio-rcar";
|
|
reg = <0 0xe6053000 0 0x50>;
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 96 32>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&cpg CPG_MOD 909>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 909>;
|
|
};
|
|
|
|
gpio4: gpio@e6054000 {
|
|
compatible = "renesas,gpio-r8a7743",
|
|
"renesas,gpio-rcar";
|
|
reg = <0 0xe6054000 0 0x50>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 128 32>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&cpg CPG_MOD 908>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 908>;
|
|
};
|
|
|
|
gpio5: gpio@e6055000 {
|
|
compatible = "renesas,gpio-r8a7743",
|
|
"renesas,gpio-rcar";
|
|
reg = <0 0xe6055000 0 0x50>;
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 160 32>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&cpg CPG_MOD 907>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 907>;
|
|
};
|
|
|
|
gpio6: gpio@e6055400 {
|
|
compatible = "renesas,gpio-r8a7743",
|
|
"renesas,gpio-rcar";
|
|
reg = <0 0xe6055400 0 0x50>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 192 32>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&cpg CPG_MOD 905>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 905>;
|
|
};
|
|
|
|
gpio7: gpio@e6055800 {
|
|
compatible = "renesas,gpio-r8a7743",
|
|
"renesas,gpio-rcar";
|
|
reg = <0 0xe6055800 0 0x50>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 224 26>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&cpg CPG_MOD 904>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 904>;
|
|
};
|
|
|
|
irqc: interrupt-controller@e61c0000 {
|
|
compatible = "renesas,irqc-r8a7743", "renesas,irqc";
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
reg = <0 0xe61c0000 0 0x200>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 407>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 407>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
cpg: clock-controller@e6150000 {
|
|
compatible = "renesas,r8a7743-cpg-mssr";
|
|
reg = <0 0xe6150000 0 0x1000>;
|
|
clocks = <&extal_clk>, <&usb_extal_clk>;
|
|
clock-names = "extal", "usb_extal";
|
|
#clock-cells = <2>;
|
|
#power-domain-cells = <0>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
prr: chipid@ff000044 {
|
|
compatible = "renesas,prr";
|
|
reg = <0 0xff000044 0 4>;
|
|
};
|
|
|
|
rst: reset-controller@e6160000 {
|
|
compatible = "renesas,r8a7743-rst";
|
|
reg = <0 0xe6160000 0 0x100>;
|
|
};
|
|
|
|
sysc: system-controller@e6180000 {
|
|
compatible = "renesas,r8a7743-sysc";
|
|
reg = <0 0xe6180000 0 0x200>;
|
|
#power-domain-cells = <1>;
|
|
};
|
|
|
|
pfc: pin-controller@e6060000 {
|
|
compatible = "renesas,pfc-r8a7743";
|
|
reg = <0 0xe6060000 0 0x250>;
|
|
};
|
|
|
|
dmac0: dma-controller@e6700000 {
|
|
compatible = "renesas,dmac-r8a7743",
|
|
"renesas,rcar-dmac";
|
|
reg = <0 0xe6700000 0 0x20000>;
|
|
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "error",
|
|
"ch0", "ch1", "ch2", "ch3",
|
|
"ch4", "ch5", "ch6", "ch7",
|
|
"ch8", "ch9", "ch10", "ch11",
|
|
"ch12", "ch13", "ch14";
|
|
clocks = <&cpg CPG_MOD 219>;
|
|
clock-names = "fck";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 219>;
|
|
#dma-cells = <1>;
|
|
dma-channels = <15>;
|
|
};
|
|
|
|
dmac1: dma-controller@e6720000 {
|
|
compatible = "renesas,dmac-r8a7743",
|
|
"renesas,rcar-dmac";
|
|
reg = <0 0xe6720000 0 0x20000>;
|
|
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
|
|
GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "error",
|
|
"ch0", "ch1", "ch2", "ch3",
|
|
"ch4", "ch5", "ch6", "ch7",
|
|
"ch8", "ch9", "ch10", "ch11",
|
|
"ch12", "ch13", "ch14";
|
|
clocks = <&cpg CPG_MOD 218>;
|
|
clock-names = "fck";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 218>;
|
|
#dma-cells = <1>;
|
|
dma-channels = <15>;
|
|
};
|
|
|
|
/* The memory map in the User's Manual maps the cores to bus
|
|
* numbers
|
|
*/
|
|
i2c0: i2c@e6508000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,i2c-r8a7743",
|
|
"renesas,rcar-gen2-i2c";
|
|
reg = <0 0xe6508000 0 0x40>;
|
|
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 931>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 931>;
|
|
i2c-scl-internal-delay-ns = <6>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@e6518000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,i2c-r8a7743",
|
|
"renesas,rcar-gen2-i2c";
|
|
reg = <0 0xe6518000 0 0x40>;
|
|
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 930>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 930>;
|
|
i2c-scl-internal-delay-ns = <6>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@e6530000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,i2c-r8a7743",
|
|
"renesas,rcar-gen2-i2c";
|
|
reg = <0 0xe6530000 0 0x40>;
|
|
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 929>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 929>;
|
|
i2c-scl-internal-delay-ns = <6>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@e6540000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,i2c-r8a7743",
|
|
"renesas,rcar-gen2-i2c";
|
|
reg = <0 0xe6540000 0 0x40>;
|
|
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 928>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 928>;
|
|
i2c-scl-internal-delay-ns = <6>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@e6520000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,i2c-r8a7743",
|
|
"renesas,rcar-gen2-i2c";
|
|
reg = <0 0xe6520000 0 0x40>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 927>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 927>;
|
|
i2c-scl-internal-delay-ns = <6>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c5: i2c@e6528000 {
|
|
/* doesn't need pinmux */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,i2c-r8a7743",
|
|
"renesas,rcar-gen2-i2c";
|
|
reg = <0 0xe6528000 0 0x40>;
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 925>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 925>;
|
|
i2c-scl-internal-delay-ns = <110>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scifa0: serial@e6c40000 {
|
|
compatible = "renesas,scifa-r8a7743",
|
|
"renesas,rcar-gen2-scifa", "renesas,scifa";
|
|
reg = <0 0xe6c40000 0 0x40>;
|
|
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 204>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac0 0x21>, <&dmac0 0x22>,
|
|
<&dmac1 0x21>, <&dmac1 0x22>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 204>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scifa1: serial@e6c50000 {
|
|
compatible = "renesas,scifa-r8a7743",
|
|
"renesas,rcar-gen2-scifa", "renesas,scifa";
|
|
reg = <0 0xe6c50000 0 0x40>;
|
|
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 203>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac0 0x25>, <&dmac0 0x26>,
|
|
<&dmac1 0x25>, <&dmac1 0x26>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 203>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scifa2: serial@e6c60000 {
|
|
compatible = "renesas,scifa-r8a7743",
|
|
"renesas,rcar-gen2-scifa", "renesas,scifa";
|
|
reg = <0 0xe6c60000 0 0x40>;
|
|
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 202>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac0 0x27>, <&dmac0 0x28>,
|
|
<&dmac1 0x27>, <&dmac1 0x28>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 202>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scifa3: serial@e6c70000 {
|
|
compatible = "renesas,scifa-r8a7743",
|
|
"renesas,rcar-gen2-scifa", "renesas,scifa";
|
|
reg = <0 0xe6c70000 0 0x40>;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 1106>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
|
|
<&dmac1 0x1b>, <&dmac1 0x1c>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 1106>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scifa4: serial@e6c78000 {
|
|
compatible = "renesas,scifa-r8a7743",
|
|
"renesas,rcar-gen2-scifa", "renesas,scifa";
|
|
reg = <0 0xe6c78000 0 0x40>;
|
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 1107>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
|
|
<&dmac1 0x1f>, <&dmac1 0x20>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 1107>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scifa5: serial@e6c80000 {
|
|
compatible = "renesas,scifa-r8a7743",
|
|
"renesas,rcar-gen2-scifa", "renesas,scifa";
|
|
reg = <0 0xe6c80000 0 0x40>;
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 1108>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac0 0x23>, <&dmac0 0x24>,
|
|
<&dmac1 0x23>, <&dmac1 0x24>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 1108>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scifb0: serial@e6c20000 {
|
|
compatible = "renesas,scifb-r8a7743",
|
|
"renesas,rcar-gen2-scifb", "renesas,scifb";
|
|
reg = <0 0xe6c20000 0 0x100>;
|
|
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 206>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
|
|
<&dmac1 0x3d>, <&dmac1 0x3e>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 206>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scifb1: serial@e6c30000 {
|
|
compatible = "renesas,scifb-r8a7743",
|
|
"renesas,rcar-gen2-scifb", "renesas,scifb";
|
|
reg = <0 0xe6c30000 0 0x100>;
|
|
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 207>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
|
|
<&dmac1 0x19>, <&dmac1 0x1a>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 207>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scifb2: serial@e6ce0000 {
|
|
compatible = "renesas,scifb-r8a7743",
|
|
"renesas,rcar-gen2-scifb", "renesas,scifb";
|
|
reg = <0 0xe6ce0000 0 0x100>;
|
|
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 216>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
|
|
<&dmac1 0x1d>, <&dmac1 0x1e>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 216>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scif0: serial@e6e60000 {
|
|
compatible = "renesas,scif-r8a7743",
|
|
"renesas,rcar-gen2-scif", "renesas,scif";
|
|
reg = <0 0xe6e60000 0 0x40>;
|
|
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 721>,
|
|
<&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
|
|
clock-names = "fck", "brg_int", "scif_clk";
|
|
dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
|
|
<&dmac1 0x29>, <&dmac1 0x2a>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 721>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scif1: serial@e6e68000 {
|
|
compatible = "renesas,scif-r8a7743",
|
|
"renesas,rcar-gen2-scif", "renesas,scif";
|
|
reg = <0 0xe6e68000 0 0x40>;
|
|
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 720>,
|
|
<&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
|
|
clock-names = "fck", "brg_int", "scif_clk";
|
|
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
|
|
<&dmac1 0x2d>, <&dmac1 0x2e>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 720>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scif2: serial@e6e58000 {
|
|
compatible = "renesas,scif-r8a7743",
|
|
"renesas,rcar-gen2-scif", "renesas,scif";
|
|
reg = <0 0xe6e58000 0 0x40>;
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 719>,
|
|
<&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
|
|
clock-names = "fck", "brg_int", "scif_clk";
|
|
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
|
|
<&dmac1 0x2b>, <&dmac1 0x2c>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 719>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scif3: serial@e6ea8000 {
|
|
compatible = "renesas,scif-r8a7743",
|
|
"renesas,rcar-gen2-scif", "renesas,scif";
|
|
reg = <0 0xe6ea8000 0 0x40>;
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 718>,
|
|
<&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
|
|
clock-names = "fck", "brg_int", "scif_clk";
|
|
dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
|
|
<&dmac1 0x2f>, <&dmac1 0x30>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 718>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scif4: serial@e6ee0000 {
|
|
compatible = "renesas,scif-r8a7743",
|
|
"renesas,rcar-gen2-scif", "renesas,scif";
|
|
reg = <0 0xe6ee0000 0 0x40>;
|
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 715>,
|
|
<&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
|
|
clock-names = "fck", "brg_int", "scif_clk";
|
|
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
|
|
<&dmac1 0xfb>, <&dmac1 0xfc>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 715>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scif5: serial@e6ee8000 {
|
|
compatible = "renesas,scif-r8a7743",
|
|
"renesas,rcar-gen2-scif", "renesas,scif";
|
|
reg = <0 0xe6ee8000 0 0x40>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 714>,
|
|
<&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
|
|
clock-names = "fck", "brg_int", "scif_clk";
|
|
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
|
|
<&dmac1 0xfd>, <&dmac1 0xfe>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 714>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hscif0: serial@e62c0000 {
|
|
compatible = "renesas,hscif-r8a7743",
|
|
"renesas,rcar-gen2-hscif", "renesas,hscif";
|
|
reg = <0 0xe62c0000 0 0x60>;
|
|
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 717>,
|
|
<&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
|
|
clock-names = "fck", "brg_int", "scif_clk";
|
|
dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
|
|
<&dmac1 0x39>, <&dmac1 0x3a>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 717>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hscif1: serial@e62c8000 {
|
|
compatible = "renesas,hscif-r8a7743",
|
|
"renesas,rcar-gen2-hscif", "renesas,hscif";
|
|
reg = <0 0xe62c8000 0 0x60>;
|
|
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 716>,
|
|
<&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
|
|
clock-names = "fck", "brg_int", "scif_clk";
|
|
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
|
|
<&dmac1 0x4d>, <&dmac1 0x4e>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 716>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hscif2: serial@e62d0000 {
|
|
compatible = "renesas,hscif-r8a7743",
|
|
"renesas,rcar-gen2-hscif", "renesas,hscif";
|
|
reg = <0 0xe62d0000 0 0x60>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 713>,
|
|
<&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
|
|
clock-names = "fck", "brg_int", "scif_clk";
|
|
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
|
|
<&dmac1 0x3b>, <&dmac1 0x3c>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 713>;
|
|
status = "disabled";
|
|
};
|
|
|
|
icram2: sram@e6300000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0 0xe6300000 0 0x40000>;
|
|
};
|
|
|
|
icram0: sram@e63a0000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0 0xe63a0000 0 0x12000>;
|
|
};
|
|
|
|
icram1: sram@e63c0000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0 0xe63c0000 0 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0xe63c0000 0x1000>;
|
|
|
|
smp-sram@0 {
|
|
compatible = "renesas,smp-sram";
|
|
reg = <0 0x10>;
|
|
};
|
|
};
|
|
|
|
ether: ethernet@ee700000 {
|
|
compatible = "renesas,ether-r8a7743";
|
|
reg = <0 0xee700000 0 0x400>;
|
|
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 813>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 813>;
|
|
phy-mode = "rmii";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
avb: ethernet@e6800000 {
|
|
compatible = "renesas,etheravb-r8a7743",
|
|
"renesas,etheravb-rcar-gen2";
|
|
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
|
|
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 812>;
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 812>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmcif0: mmc@ee200000 {
|
|
compatible = "renesas,mmcif-r8a7743",
|
|
"renesas,sh-mmcif";
|
|
reg = <0 0xee200000 0 0x80>;
|
|
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 315>;
|
|
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
|
|
<&dmac1 0xd1>, <&dmac1 0xd2>;
|
|
dma-names = "tx", "rx", "tx", "rx";
|
|
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
|
|
resets = <&cpg 315>;
|
|
reg-io-width = <4>;
|
|
max-frequency = <97500000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
/* External root clock */
|
|
extal_clk: extal {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
/* This value must be overridden by the board. */
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
/* External USB clock - can be overridden by the board */
|
|
usb_extal_clk: usb_extal {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <48000000>;
|
|
};
|
|
|
|
/* External SCIF clock */
|
|
scif_clk: scif {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
/* This value must be overridden by the board. */
|
|
clock-frequency = <0>;
|
|
};
|
|
};
|