![Heiner Kallweit](/assets/img/avatar_default.png)
We have the settings array of modes which is sorted based on aneg priority. Instead of checking each mode manually let's simply iterate over the sorted settings. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
939 lines
23 KiB
C
939 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Core PHY library, taken from phy.c
|
|
*/
|
|
#include <linux/export.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/of.h>
|
|
|
|
const char *phy_speed_to_str(int speed)
|
|
{
|
|
switch (speed) {
|
|
case SPEED_10:
|
|
return "10Mbps";
|
|
case SPEED_100:
|
|
return "100Mbps";
|
|
case SPEED_1000:
|
|
return "1Gbps";
|
|
case SPEED_2500:
|
|
return "2.5Gbps";
|
|
case SPEED_5000:
|
|
return "5Gbps";
|
|
case SPEED_10000:
|
|
return "10Gbps";
|
|
case SPEED_14000:
|
|
return "14Gbps";
|
|
case SPEED_20000:
|
|
return "20Gbps";
|
|
case SPEED_25000:
|
|
return "25Gbps";
|
|
case SPEED_40000:
|
|
return "40Gbps";
|
|
case SPEED_50000:
|
|
return "50Gbps";
|
|
case SPEED_56000:
|
|
return "56Gbps";
|
|
case SPEED_100000:
|
|
return "100Gbps";
|
|
case SPEED_UNKNOWN:
|
|
return "Unknown";
|
|
default:
|
|
return "Unsupported (update phy-core.c)";
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(phy_speed_to_str);
|
|
|
|
const char *phy_duplex_to_str(unsigned int duplex)
|
|
{
|
|
if (duplex == DUPLEX_HALF)
|
|
return "Half";
|
|
if (duplex == DUPLEX_FULL)
|
|
return "Full";
|
|
if (duplex == DUPLEX_UNKNOWN)
|
|
return "Unknown";
|
|
return "Unsupported (update phy-core.c)";
|
|
}
|
|
EXPORT_SYMBOL_GPL(phy_duplex_to_str);
|
|
|
|
/* A mapping of all SUPPORTED settings to speed/duplex. This table
|
|
* must be grouped by speed and sorted in descending match priority
|
|
* - iow, descending speed. */
|
|
static const struct phy_setting settings[] = {
|
|
/* 100G */
|
|
{
|
|
.speed = SPEED_100000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_100000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_100000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_100000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT,
|
|
},
|
|
/* 56G */
|
|
{
|
|
.speed = SPEED_56000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_56000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_56000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_56000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT,
|
|
},
|
|
/* 50G */
|
|
{
|
|
.speed = SPEED_50000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_50000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_50000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT,
|
|
},
|
|
/* 40G */
|
|
{
|
|
.speed = SPEED_40000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_40000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_40000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_40000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT,
|
|
},
|
|
/* 25G */
|
|
{
|
|
.speed = SPEED_25000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_25000baseCR_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_25000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_25000baseKR_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_25000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_25000baseSR_Full_BIT,
|
|
},
|
|
|
|
/* 20G */
|
|
{
|
|
.speed = SPEED_20000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_20000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT,
|
|
},
|
|
/* 10G */
|
|
{
|
|
.speed = SPEED_10000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_10000baseCR_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_10000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_10000baseER_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_10000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_10000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_10000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_10000baseLR_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_10000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_10000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_10000baseR_FEC_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_10000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_10000baseSR_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_10000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
|
|
},
|
|
/* 5G */
|
|
{
|
|
.speed = SPEED_5000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
|
|
},
|
|
|
|
/* 2.5G */
|
|
{
|
|
.speed = SPEED_2500,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_2500,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT,
|
|
},
|
|
/* 1G */
|
|
{
|
|
.speed = SPEED_1000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_1000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_1000,
|
|
.duplex = DUPLEX_HALF,
|
|
.bit = ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_1000,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
|
|
},
|
|
/* 100M */
|
|
{
|
|
.speed = SPEED_100,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_100baseT_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_100,
|
|
.duplex = DUPLEX_HALF,
|
|
.bit = ETHTOOL_LINK_MODE_100baseT_Half_BIT,
|
|
},
|
|
/* 10M */
|
|
{
|
|
.speed = SPEED_10,
|
|
.duplex = DUPLEX_FULL,
|
|
.bit = ETHTOOL_LINK_MODE_10baseT_Full_BIT,
|
|
},
|
|
{
|
|
.speed = SPEED_10,
|
|
.duplex = DUPLEX_HALF,
|
|
.bit = ETHTOOL_LINK_MODE_10baseT_Half_BIT,
|
|
},
|
|
};
|
|
|
|
/**
|
|
* phy_lookup_setting - lookup a PHY setting
|
|
* @speed: speed to match
|
|
* @duplex: duplex to match
|
|
* @mask: allowed link modes
|
|
* @exact: an exact match is required
|
|
*
|
|
* Search the settings array for a setting that matches the speed and
|
|
* duplex, and which is supported.
|
|
*
|
|
* If @exact is unset, either an exact match or %NULL for no match will
|
|
* be returned.
|
|
*
|
|
* If @exact is set, an exact match, the fastest supported setting at
|
|
* or below the specified speed, the slowest supported setting, or if
|
|
* they all fail, %NULL will be returned.
|
|
*/
|
|
const struct phy_setting *
|
|
phy_lookup_setting(int speed, int duplex, const unsigned long *mask, bool exact)
|
|
{
|
|
const struct phy_setting *p, *match = NULL, *last = NULL;
|
|
int i;
|
|
|
|
for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
|
|
if (p->bit < __ETHTOOL_LINK_MODE_MASK_NBITS &&
|
|
test_bit(p->bit, mask)) {
|
|
last = p;
|
|
if (p->speed == speed && p->duplex == duplex) {
|
|
/* Exact match for speed and duplex */
|
|
match = p;
|
|
break;
|
|
} else if (!exact) {
|
|
if (!match && p->speed <= speed)
|
|
/* Candidate */
|
|
match = p;
|
|
|
|
if (p->speed < speed)
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!match && !exact)
|
|
match = last;
|
|
|
|
return match;
|
|
}
|
|
EXPORT_SYMBOL_GPL(phy_lookup_setting);
|
|
|
|
size_t phy_speeds(unsigned int *speeds, size_t size,
|
|
unsigned long *mask)
|
|
{
|
|
size_t count;
|
|
int i;
|
|
|
|
for (i = 0, count = 0; i < ARRAY_SIZE(settings) && count < size; i++)
|
|
if (settings[i].bit < __ETHTOOL_LINK_MODE_MASK_NBITS &&
|
|
test_bit(settings[i].bit, mask) &&
|
|
(count == 0 || speeds[count - 1] != settings[i].speed))
|
|
speeds[count++] = settings[i].speed;
|
|
|
|
return count;
|
|
}
|
|
|
|
static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
|
|
{
|
|
const struct phy_setting *p;
|
|
int i;
|
|
|
|
for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) {
|
|
if (p->speed > max_speed)
|
|
linkmode_clear_bit(p->bit, phydev->supported);
|
|
else
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
|
|
{
|
|
int err;
|
|
|
|
err = __set_phy_supported(phydev, max_speed);
|
|
if (err)
|
|
return err;
|
|
|
|
linkmode_copy(phydev->advertising, phydev->supported);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(phy_set_max_speed);
|
|
|
|
void of_set_phy_supported(struct phy_device *phydev)
|
|
{
|
|
struct device_node *node = phydev->mdio.dev.of_node;
|
|
u32 max_speed;
|
|
|
|
if (!IS_ENABLED(CONFIG_OF_MDIO))
|
|
return;
|
|
|
|
if (!node)
|
|
return;
|
|
|
|
if (!of_property_read_u32(node, "max-speed", &max_speed))
|
|
__set_phy_supported(phydev, max_speed);
|
|
}
|
|
|
|
void of_set_phy_eee_broken(struct phy_device *phydev)
|
|
{
|
|
struct device_node *node = phydev->mdio.dev.of_node;
|
|
u32 broken = 0;
|
|
|
|
if (!IS_ENABLED(CONFIG_OF_MDIO))
|
|
return;
|
|
|
|
if (!node)
|
|
return;
|
|
|
|
if (of_property_read_bool(node, "eee-broken-100tx"))
|
|
broken |= MDIO_EEE_100TX;
|
|
if (of_property_read_bool(node, "eee-broken-1000t"))
|
|
broken |= MDIO_EEE_1000T;
|
|
if (of_property_read_bool(node, "eee-broken-10gt"))
|
|
broken |= MDIO_EEE_10GT;
|
|
if (of_property_read_bool(node, "eee-broken-1000kx"))
|
|
broken |= MDIO_EEE_1000KX;
|
|
if (of_property_read_bool(node, "eee-broken-10gkx4"))
|
|
broken |= MDIO_EEE_10GKX4;
|
|
if (of_property_read_bool(node, "eee-broken-10gkr"))
|
|
broken |= MDIO_EEE_10GKR;
|
|
|
|
phydev->eee_broken_modes = broken;
|
|
}
|
|
|
|
/**
|
|
* phy_resolve_aneg_linkmode - resolve the advertisements into phy settings
|
|
* @phydev: The phy_device struct
|
|
*
|
|
* Resolve our and the link partner advertisements into their corresponding
|
|
* speed and duplex. If full duplex was negotiated, extract the pause mode
|
|
* from the link partner mask.
|
|
*/
|
|
void phy_resolve_aneg_linkmode(struct phy_device *phydev)
|
|
{
|
|
__ETHTOOL_DECLARE_LINK_MODE_MASK(common);
|
|
int i;
|
|
|
|
linkmode_and(common, phydev->lp_advertising, phydev->advertising);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(settings); i++)
|
|
if (test_bit(settings[i].bit, common)) {
|
|
phydev->speed = settings[i].speed;
|
|
phydev->duplex = settings[i].duplex;
|
|
break;
|
|
}
|
|
|
|
if (phydev->duplex == DUPLEX_FULL) {
|
|
phydev->pause = linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
|
|
phydev->lp_advertising);
|
|
phydev->asym_pause = linkmode_test_bit(
|
|
ETHTOOL_LINK_MODE_Asym_Pause_BIT,
|
|
phydev->lp_advertising);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(phy_resolve_aneg_linkmode);
|
|
|
|
static void mmd_phy_indirect(struct mii_bus *bus, int phy_addr, int devad,
|
|
u16 regnum)
|
|
{
|
|
/* Write the desired MMD Devad */
|
|
__mdiobus_write(bus, phy_addr, MII_MMD_CTRL, devad);
|
|
|
|
/* Write the desired MMD register address */
|
|
__mdiobus_write(bus, phy_addr, MII_MMD_DATA, regnum);
|
|
|
|
/* Select the Function : DATA with no post increment */
|
|
__mdiobus_write(bus, phy_addr, MII_MMD_CTRL,
|
|
devad | MII_MMD_CTRL_NOINCR);
|
|
}
|
|
|
|
/**
|
|
* __phy_read_mmd - Convenience function for reading a register
|
|
* from an MMD on a given PHY.
|
|
* @phydev: The phy_device struct
|
|
* @devad: The MMD to read from (0..31)
|
|
* @regnum: The register on the MMD to read (0..65535)
|
|
*
|
|
* Same rules as for __phy_read();
|
|
*/
|
|
int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
|
|
{
|
|
int val;
|
|
|
|
if (regnum > (u16)~0 || devad > 32)
|
|
return -EINVAL;
|
|
|
|
if (phydev->drv->read_mmd) {
|
|
val = phydev->drv->read_mmd(phydev, devad, regnum);
|
|
} else if (phydev->is_c45) {
|
|
u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
|
|
|
|
val = __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr);
|
|
} else {
|
|
struct mii_bus *bus = phydev->mdio.bus;
|
|
int phy_addr = phydev->mdio.addr;
|
|
|
|
mmd_phy_indirect(bus, phy_addr, devad, regnum);
|
|
|
|
/* Read the content of the MMD's selected register */
|
|
val = __mdiobus_read(bus, phy_addr, MII_MMD_DATA);
|
|
}
|
|
return val;
|
|
}
|
|
EXPORT_SYMBOL(__phy_read_mmd);
|
|
|
|
/**
|
|
* phy_read_mmd - Convenience function for reading a register
|
|
* from an MMD on a given PHY.
|
|
* @phydev: The phy_device struct
|
|
* @devad: The MMD to read from
|
|
* @regnum: The register on the MMD to read
|
|
*
|
|
* Same rules as for phy_read();
|
|
*/
|
|
int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&phydev->mdio.bus->mdio_lock);
|
|
ret = __phy_read_mmd(phydev, devad, regnum);
|
|
mutex_unlock(&phydev->mdio.bus->mdio_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(phy_read_mmd);
|
|
|
|
/**
|
|
* __phy_write_mmd - Convenience function for writing a register
|
|
* on an MMD on a given PHY.
|
|
* @phydev: The phy_device struct
|
|
* @devad: The MMD to read from
|
|
* @regnum: The register on the MMD to read
|
|
* @val: value to write to @regnum
|
|
*
|
|
* Same rules as for __phy_write();
|
|
*/
|
|
int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
|
|
{
|
|
int ret;
|
|
|
|
if (regnum > (u16)~0 || devad > 32)
|
|
return -EINVAL;
|
|
|
|
if (phydev->drv->write_mmd) {
|
|
ret = phydev->drv->write_mmd(phydev, devad, regnum, val);
|
|
} else if (phydev->is_c45) {
|
|
u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
|
|
|
|
ret = __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
|
|
addr, val);
|
|
} else {
|
|
struct mii_bus *bus = phydev->mdio.bus;
|
|
int phy_addr = phydev->mdio.addr;
|
|
|
|
mmd_phy_indirect(bus, phy_addr, devad, regnum);
|
|
|
|
/* Write the data into MMD's selected register */
|
|
__mdiobus_write(bus, phy_addr, MII_MMD_DATA, val);
|
|
|
|
ret = 0;
|
|
}
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(__phy_write_mmd);
|
|
|
|
/**
|
|
* phy_write_mmd - Convenience function for writing a register
|
|
* on an MMD on a given PHY.
|
|
* @phydev: The phy_device struct
|
|
* @devad: The MMD to read from
|
|
* @regnum: The register on the MMD to read
|
|
* @val: value to write to @regnum
|
|
*
|
|
* Same rules as for phy_write();
|
|
*/
|
|
int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&phydev->mdio.bus->mdio_lock);
|
|
ret = __phy_write_mmd(phydev, devad, regnum, val);
|
|
mutex_unlock(&phydev->mdio.bus->mdio_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(phy_write_mmd);
|
|
|
|
/**
|
|
* __phy_modify_changed() - Convenience function for modifying a PHY register
|
|
* @phydev: a pointer to a &struct phy_device
|
|
* @regnum: register number
|
|
* @mask: bit mask of bits to clear
|
|
* @set: bit mask of bits to set
|
|
*
|
|
* Unlocked helper function which allows a PHY register to be modified as
|
|
* new register value = (old register value & ~mask) | set
|
|
*
|
|
* Returns negative errno, 0 if there was no change, and 1 in case of change
|
|
*/
|
|
int __phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask,
|
|
u16 set)
|
|
{
|
|
int new, ret;
|
|
|
|
ret = __phy_read(phydev, regnum);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
new = (ret & ~mask) | set;
|
|
if (new == ret)
|
|
return 0;
|
|
|
|
ret = __phy_write(phydev, regnum, new);
|
|
|
|
return ret < 0 ? ret : 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(__phy_modify_changed);
|
|
|
|
/**
|
|
* phy_modify_changed - Function for modifying a PHY register
|
|
* @phydev: the phy_device struct
|
|
* @regnum: register number to modify
|
|
* @mask: bit mask of bits to clear
|
|
* @set: new value of bits set in mask to write to @regnum
|
|
*
|
|
* NOTE: MUST NOT be called from interrupt context,
|
|
* because the bus read/write functions may wait for an interrupt
|
|
* to conclude the operation.
|
|
*
|
|
* Returns negative errno, 0 if there was no change, and 1 in case of change
|
|
*/
|
|
int phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&phydev->mdio.bus->mdio_lock);
|
|
ret = __phy_modify_changed(phydev, regnum, mask, set);
|
|
mutex_unlock(&phydev->mdio.bus->mdio_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(phy_modify_changed);
|
|
|
|
/**
|
|
* __phy_modify - Convenience function for modifying a PHY register
|
|
* @phydev: the phy_device struct
|
|
* @regnum: register number to modify
|
|
* @mask: bit mask of bits to clear
|
|
* @set: new value of bits set in mask to write to @regnum
|
|
*
|
|
* NOTE: MUST NOT be called from interrupt context,
|
|
* because the bus read/write functions may wait for an interrupt
|
|
* to conclude the operation.
|
|
*/
|
|
int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
|
|
{
|
|
int ret;
|
|
|
|
ret = __phy_modify_changed(phydev, regnum, mask, set);
|
|
|
|
return ret < 0 ? ret : 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(__phy_modify);
|
|
|
|
/**
|
|
* phy_modify - Convenience function for modifying a given PHY register
|
|
* @phydev: the phy_device struct
|
|
* @regnum: register number to write
|
|
* @mask: bit mask of bits to clear
|
|
* @set: new value of bits set in mask to write to @regnum
|
|
*
|
|
* NOTE: MUST NOT be called from interrupt context,
|
|
* because the bus read/write functions may wait for an interrupt
|
|
* to conclude the operation.
|
|
*/
|
|
int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&phydev->mdio.bus->mdio_lock);
|
|
ret = __phy_modify(phydev, regnum, mask, set);
|
|
mutex_unlock(&phydev->mdio.bus->mdio_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(phy_modify);
|
|
|
|
/**
|
|
* __phy_modify_mmd_changed - Function for modifying a register on MMD
|
|
* @phydev: the phy_device struct
|
|
* @devad: the MMD containing register to modify
|
|
* @regnum: register number to modify
|
|
* @mask: bit mask of bits to clear
|
|
* @set: new value of bits set in mask to write to @regnum
|
|
*
|
|
* Unlocked helper function which allows a MMD register to be modified as
|
|
* new register value = (old register value & ~mask) | set
|
|
*
|
|
* Returns negative errno, 0 if there was no change, and 1 in case of change
|
|
*/
|
|
int __phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
|
|
u16 mask, u16 set)
|
|
{
|
|
int new, ret;
|
|
|
|
ret = __phy_read_mmd(phydev, devad, regnum);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
new = (ret & ~mask) | set;
|
|
if (new == ret)
|
|
return 0;
|
|
|
|
ret = __phy_write_mmd(phydev, devad, regnum, new);
|
|
|
|
return ret < 0 ? ret : 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(__phy_modify_mmd_changed);
|
|
|
|
/**
|
|
* phy_modify_mmd_changed - Function for modifying a register on MMD
|
|
* @phydev: the phy_device struct
|
|
* @devad: the MMD containing register to modify
|
|
* @regnum: register number to modify
|
|
* @mask: bit mask of bits to clear
|
|
* @set: new value of bits set in mask to write to @regnum
|
|
*
|
|
* NOTE: MUST NOT be called from interrupt context,
|
|
* because the bus read/write functions may wait for an interrupt
|
|
* to conclude the operation.
|
|
*
|
|
* Returns negative errno, 0 if there was no change, and 1 in case of change
|
|
*/
|
|
int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
|
|
u16 mask, u16 set)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&phydev->mdio.bus->mdio_lock);
|
|
ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
|
|
mutex_unlock(&phydev->mdio.bus->mdio_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(phy_modify_mmd_changed);
|
|
|
|
/**
|
|
* __phy_modify_mmd - Convenience function for modifying a register on MMD
|
|
* @phydev: the phy_device struct
|
|
* @devad: the MMD containing register to modify
|
|
* @regnum: register number to modify
|
|
* @mask: bit mask of bits to clear
|
|
* @set: new value of bits set in mask to write to @regnum
|
|
*
|
|
* NOTE: MUST NOT be called from interrupt context,
|
|
* because the bus read/write functions may wait for an interrupt
|
|
* to conclude the operation.
|
|
*/
|
|
int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
|
|
u16 mask, u16 set)
|
|
{
|
|
int ret;
|
|
|
|
ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
|
|
|
|
return ret < 0 ? ret : 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(__phy_modify_mmd);
|
|
|
|
/**
|
|
* phy_modify_mmd - Convenience function for modifying a register on MMD
|
|
* @phydev: the phy_device struct
|
|
* @devad: the MMD containing register to modify
|
|
* @regnum: register number to modify
|
|
* @mask: bit mask of bits to clear
|
|
* @set: new value of bits set in mask to write to @regnum
|
|
*
|
|
* NOTE: MUST NOT be called from interrupt context,
|
|
* because the bus read/write functions may wait for an interrupt
|
|
* to conclude the operation.
|
|
*/
|
|
int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
|
|
u16 mask, u16 set)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&phydev->mdio.bus->mdio_lock);
|
|
ret = __phy_modify_mmd(phydev, devad, regnum, mask, set);
|
|
mutex_unlock(&phydev->mdio.bus->mdio_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(phy_modify_mmd);
|
|
|
|
static int __phy_read_page(struct phy_device *phydev)
|
|
{
|
|
return phydev->drv->read_page(phydev);
|
|
}
|
|
|
|
static int __phy_write_page(struct phy_device *phydev, int page)
|
|
{
|
|
return phydev->drv->write_page(phydev, page);
|
|
}
|
|
|
|
/**
|
|
* phy_save_page() - take the bus lock and save the current page
|
|
* @phydev: a pointer to a &struct phy_device
|
|
*
|
|
* Take the MDIO bus lock, and return the current page number. On error,
|
|
* returns a negative errno. phy_restore_page() must always be called
|
|
* after this, irrespective of success or failure of this call.
|
|
*/
|
|
int phy_save_page(struct phy_device *phydev)
|
|
{
|
|
mutex_lock(&phydev->mdio.bus->mdio_lock);
|
|
return __phy_read_page(phydev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(phy_save_page);
|
|
|
|
/**
|
|
* phy_select_page() - take the bus lock, save the current page, and set a page
|
|
* @phydev: a pointer to a &struct phy_device
|
|
* @page: desired page
|
|
*
|
|
* Take the MDIO bus lock to protect against concurrent access, save the
|
|
* current PHY page, and set the current page. On error, returns a
|
|
* negative errno, otherwise returns the previous page number.
|
|
* phy_restore_page() must always be called after this, irrespective
|
|
* of success or failure of this call.
|
|
*/
|
|
int phy_select_page(struct phy_device *phydev, int page)
|
|
{
|
|
int ret, oldpage;
|
|
|
|
oldpage = ret = phy_save_page(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (oldpage != page) {
|
|
ret = __phy_write_page(phydev, page);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return oldpage;
|
|
}
|
|
EXPORT_SYMBOL_GPL(phy_select_page);
|
|
|
|
/**
|
|
* phy_restore_page() - restore the page register and release the bus lock
|
|
* @phydev: a pointer to a &struct phy_device
|
|
* @oldpage: the old page, return value from phy_save_page() or phy_select_page()
|
|
* @ret: operation's return code
|
|
*
|
|
* Release the MDIO bus lock, restoring @oldpage if it is a valid page.
|
|
* This function propagates the earliest error code from the group of
|
|
* operations.
|
|
*
|
|
* Returns:
|
|
* @oldpage if it was a negative value, otherwise
|
|
* @ret if it was a negative errno value, otherwise
|
|
* phy_write_page()'s negative value if it were in error, otherwise
|
|
* @ret.
|
|
*/
|
|
int phy_restore_page(struct phy_device *phydev, int oldpage, int ret)
|
|
{
|
|
int r;
|
|
|
|
if (oldpage >= 0) {
|
|
r = __phy_write_page(phydev, oldpage);
|
|
|
|
/* Propagate the operation return code if the page write
|
|
* was successful.
|
|
*/
|
|
if (ret >= 0 && r < 0)
|
|
ret = r;
|
|
} else {
|
|
/* Propagate the phy page selection error code */
|
|
ret = oldpage;
|
|
}
|
|
|
|
mutex_unlock(&phydev->mdio.bus->mdio_lock);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(phy_restore_page);
|
|
|
|
/**
|
|
* phy_read_paged() - Convenience function for reading a paged register
|
|
* @phydev: a pointer to a &struct phy_device
|
|
* @page: the page for the phy
|
|
* @regnum: register number
|
|
*
|
|
* Same rules as for phy_read().
|
|
*/
|
|
int phy_read_paged(struct phy_device *phydev, int page, u32 regnum)
|
|
{
|
|
int ret = 0, oldpage;
|
|
|
|
oldpage = phy_select_page(phydev, page);
|
|
if (oldpage >= 0)
|
|
ret = __phy_read(phydev, regnum);
|
|
|
|
return phy_restore_page(phydev, oldpage, ret);
|
|
}
|
|
EXPORT_SYMBOL(phy_read_paged);
|
|
|
|
/**
|
|
* phy_write_paged() - Convenience function for writing a paged register
|
|
* @phydev: a pointer to a &struct phy_device
|
|
* @page: the page for the phy
|
|
* @regnum: register number
|
|
* @val: value to write
|
|
*
|
|
* Same rules as for phy_write().
|
|
*/
|
|
int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val)
|
|
{
|
|
int ret = 0, oldpage;
|
|
|
|
oldpage = phy_select_page(phydev, page);
|
|
if (oldpage >= 0)
|
|
ret = __phy_write(phydev, regnum, val);
|
|
|
|
return phy_restore_page(phydev, oldpage, ret);
|
|
}
|
|
EXPORT_SYMBOL(phy_write_paged);
|
|
|
|
/**
|
|
* phy_modify_paged() - Convenience function for modifying a paged register
|
|
* @phydev: a pointer to a &struct phy_device
|
|
* @page: the page for the phy
|
|
* @regnum: register number
|
|
* @mask: bit mask of bits to clear
|
|
* @set: bit mask of bits to set
|
|
*
|
|
* Same rules as for phy_read() and phy_write().
|
|
*/
|
|
int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum,
|
|
u16 mask, u16 set)
|
|
{
|
|
int ret = 0, oldpage;
|
|
|
|
oldpage = phy_select_page(phydev, page);
|
|
if (oldpage >= 0)
|
|
ret = __phy_modify(phydev, regnum, mask, set);
|
|
|
|
return phy_restore_page(phydev, oldpage, ret);
|
|
}
|
|
EXPORT_SYMBOL(phy_modify_paged);
|