1606f9de2a
Update the pinctrl ranges property to support pioD controller whose mapping is not contiguous with other pio controllers. Without this update, getting resource will fail, then pinctrl probe will fail too because there is a missing pio controller. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
1861 lines
51 KiB
Plaintext
1861 lines
51 KiB
Plaintext
/*
|
|
* sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC
|
|
*
|
|
* Copyright (C) 2014 Atmel,
|
|
* 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include "skeleton.dtsi"
|
|
#include <dt-bindings/clock/at91.h>
|
|
#include <dt-bindings/dma/at91.h>
|
|
#include <dt-bindings/pinctrl/at91.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "Atmel SAMA5D4 family SoC";
|
|
compatible = "atmel,sama5d4";
|
|
interrupt-parent = <&aic>;
|
|
|
|
aliases {
|
|
serial0 = &usart3;
|
|
serial1 = &usart4;
|
|
serial2 = &usart2;
|
|
serial3 = &usart0;
|
|
serial4 = &usart1;
|
|
serial5 = &uart0;
|
|
serial6 = &uart1;
|
|
gpio0 = &pioA;
|
|
gpio1 = &pioB;
|
|
gpio2 = &pioC;
|
|
gpio3 = &pioD;
|
|
gpio4 = &pioE;
|
|
pwm0 = &pwm0;
|
|
ssc0 = &ssc0;
|
|
ssc1 = &ssc1;
|
|
tcb0 = &tcb0;
|
|
tcb1 = &tcb1;
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
};
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a5";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
reg = <0x20000000 0x20000000>;
|
|
};
|
|
|
|
clocks {
|
|
slow_xtal: slow_xtal {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
main_xtal: main_xtal {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
adc_op_clk: adc_op_clk{
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <1000000>;
|
|
};
|
|
};
|
|
|
|
ns_sram: sram@00210000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x00210000 0x10000>;
|
|
};
|
|
|
|
ahb {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
usb0: gadget@00400000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "atmel,at91sam9rl-udc";
|
|
reg = <0x00400000 0x100000
|
|
0xfc02c000 0x4000>;
|
|
interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
|
|
clocks = <&udphs_clk>, <&utmi>;
|
|
clock-names = "pclk", "hclk";
|
|
status = "disabled";
|
|
|
|
ep0 {
|
|
reg = <0>;
|
|
atmel,fifo-size = <64>;
|
|
atmel,nb-banks = <1>;
|
|
};
|
|
|
|
ep1 {
|
|
reg = <1>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <3>;
|
|
atmel,can-dma;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep2 {
|
|
reg = <2>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <3>;
|
|
atmel,can-dma;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep3 {
|
|
reg = <3>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <2>;
|
|
atmel,can-dma;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep4 {
|
|
reg = <4>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <2>;
|
|
atmel,can-dma;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep5 {
|
|
reg = <5>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <2>;
|
|
atmel,can-dma;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep6 {
|
|
reg = <6>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <2>;
|
|
atmel,can-dma;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep7 {
|
|
reg = <7>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <2>;
|
|
atmel,can-dma;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep8 {
|
|
reg = <8>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <2>;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep9 {
|
|
reg = <9>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <2>;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep10 {
|
|
reg = <10>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <2>;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep11 {
|
|
reg = <11>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <2>;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep12 {
|
|
reg = <12>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <2>;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep13 {
|
|
reg = <13>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <2>;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep14 {
|
|
reg = <14>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <2>;
|
|
atmel,can-isoc;
|
|
};
|
|
|
|
ep15 {
|
|
reg = <15>;
|
|
atmel,fifo-size = <1024>;
|
|
atmel,nb-banks = <2>;
|
|
atmel,can-isoc;
|
|
};
|
|
};
|
|
|
|
usb1: ohci@00500000 {
|
|
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
|
|
reg = <0x00500000 0x100000>;
|
|
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
|
|
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
|
|
<&uhpck>;
|
|
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2: ehci@00600000 {
|
|
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
|
|
reg = <0x00600000 0x100000>;
|
|
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
|
|
clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
|
|
clock-names = "usb_clk", "ehci_clk", "uhpck";
|
|
status = "disabled";
|
|
};
|
|
|
|
L2: cache-controller@00a00000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0x00a00000 0x1000>;
|
|
interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
nand0: nand@80000000 {
|
|
compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
reg = < 0x80000000 0x08000000 /* EBI CS3 */
|
|
0xfc05c070 0x00000490 /* SMC PMECC regs */
|
|
0xfc05c500 0x00000100 /* SMC PMECC Error Location regs */
|
|
>;
|
|
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>;
|
|
atmel,nand-addr-offset = <21>;
|
|
atmel,nand-cmd-offset = <22>;
|
|
atmel,nand-has-dma;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_nand>;
|
|
status = "disabled";
|
|
|
|
nfc@90000000 {
|
|
compatible = "atmel,sama5d3-nfc";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <
|
|
0x90000000 0x10000000 /* NFC Command Registers */
|
|
0xfc05c000 0x00000070 /* NFC HSMC regs */
|
|
0x00100000 0x00100000 /* NFC SRAM banks */
|
|
>;
|
|
clocks = <&hsmc_clk>;
|
|
atmel,write-by-sram;
|
|
};
|
|
};
|
|
|
|
apb {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
hlcdc: hlcdc@f0000000 {
|
|
compatible = "atmel,sama5d4-hlcdc";
|
|
reg = <0xf0000000 0x4000>;
|
|
interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
|
|
clock-names = "periph_clk","sys_clk", "slow_clk";
|
|
status = "disabled";
|
|
|
|
hlcdc-display-controller {
|
|
compatible = "atmel,hlcdc-display-controller";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
hlcdc_pwm: hlcdc-pwm {
|
|
compatible = "atmel,hlcdc-pwm";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lcd_pwm>;
|
|
#pwm-cells = <3>;
|
|
};
|
|
};
|
|
|
|
dma1: dma-controller@f0004000 {
|
|
compatible = "atmel,sama5d4-dma";
|
|
reg = <0xf0004000 0x200>;
|
|
interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
#dma-cells = <1>;
|
|
clocks = <&dma1_clk>;
|
|
clock-names = "dma_clk";
|
|
};
|
|
|
|
isi: isi@f0008000 {
|
|
compatible = "atmel,at91sam9g45-isi";
|
|
reg = <0xf0008000 0x4000>;
|
|
interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_isi_data_0_7>;
|
|
clocks = <&isi_clk>;
|
|
clock-names = "isi_clk";
|
|
status = "disabled";
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
ramc0: ramc@f0010000 {
|
|
compatible = "atmel,sama5d3-ddramc";
|
|
reg = <0xf0010000 0x200>;
|
|
clocks = <&ddrck>, <&mpddr_clk>;
|
|
clock-names = "ddrck", "mpddr";
|
|
};
|
|
|
|
dma0: dma-controller@f0014000 {
|
|
compatible = "atmel,sama5d4-dma";
|
|
reg = <0xf0014000 0x200>;
|
|
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
#dma-cells = <1>;
|
|
clocks = <&dma0_clk>;
|
|
clock-names = "dma_clk";
|
|
};
|
|
|
|
pmc: pmc@f0018000 {
|
|
compatible = "atmel,sama5d3-pmc";
|
|
reg = <0xf0018000 0x120>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
|
|
main_rc_osc: main_rc_osc {
|
|
compatible = "atmel,at91sam9x5-clk-main-rc-osc";
|
|
#clock-cells = <0>;
|
|
interrupt-parent = <&pmc>;
|
|
interrupts = <AT91_PMC_MOSCRCS>;
|
|
clock-frequency = <12000000>;
|
|
clock-accuracy = <100000000>;
|
|
};
|
|
|
|
main_osc: main_osc {
|
|
compatible = "atmel,at91rm9200-clk-main-osc";
|
|
#clock-cells = <0>;
|
|
interrupt-parent = <&pmc>;
|
|
interrupts = <AT91_PMC_MOSCS>;
|
|
clocks = <&main_xtal>;
|
|
};
|
|
|
|
main: mainck {
|
|
compatible = "atmel,at91sam9x5-clk-main";
|
|
#clock-cells = <0>;
|
|
interrupt-parent = <&pmc>;
|
|
interrupts = <AT91_PMC_MOSCSELS>;
|
|
clocks = <&main_rc_osc &main_osc>;
|
|
};
|
|
|
|
plla: pllack {
|
|
compatible = "atmel,sama5d3-clk-pll";
|
|
#clock-cells = <0>;
|
|
interrupt-parent = <&pmc>;
|
|
interrupts = <AT91_PMC_LOCKA>;
|
|
clocks = <&main>;
|
|
reg = <0>;
|
|
atmel,clk-input-range = <12000000 12000000>;
|
|
#atmel,pll-clk-output-range-cells = <4>;
|
|
atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
|
|
};
|
|
|
|
plladiv: plladivck {
|
|
compatible = "atmel,at91sam9x5-clk-plldiv";
|
|
#clock-cells = <0>;
|
|
clocks = <&plla>;
|
|
};
|
|
|
|
utmi: utmick {
|
|
compatible = "atmel,at91sam9x5-clk-utmi";
|
|
#clock-cells = <0>;
|
|
interrupt-parent = <&pmc>;
|
|
interrupts = <AT91_PMC_LOCKU>;
|
|
clocks = <&main>;
|
|
};
|
|
|
|
mck: masterck {
|
|
compatible = "atmel,at91sam9x5-clk-master";
|
|
#clock-cells = <0>;
|
|
interrupt-parent = <&pmc>;
|
|
interrupts = <AT91_PMC_MCKRDY>;
|
|
clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
|
|
atmel,clk-output-range = <125000000 177000000>;
|
|
atmel,clk-divisors = <1 2 4 3>;
|
|
};
|
|
|
|
h32ck: h32mxck {
|
|
#clock-cells = <0>;
|
|
compatible = "atmel,sama5d4-clk-h32mx";
|
|
clocks = <&mck>;
|
|
};
|
|
|
|
usb: usbck {
|
|
compatible = "atmel,at91sam9x5-clk-usb";
|
|
#clock-cells = <0>;
|
|
clocks = <&plladiv>, <&utmi>;
|
|
};
|
|
|
|
prog: progck {
|
|
compatible = "atmel,at91sam9x5-clk-programmable";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = <&pmc>;
|
|
clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
|
|
|
|
prog0: prog0 {
|
|
#clock-cells = <0>;
|
|
reg = <0>;
|
|
interrupts = <AT91_PMC_PCKRDY(0)>;
|
|
};
|
|
|
|
prog1: prog1 {
|
|
#clock-cells = <0>;
|
|
reg = <1>;
|
|
interrupts = <AT91_PMC_PCKRDY(1)>;
|
|
};
|
|
|
|
prog2: prog2 {
|
|
#clock-cells = <0>;
|
|
reg = <2>;
|
|
interrupts = <AT91_PMC_PCKRDY(2)>;
|
|
};
|
|
};
|
|
|
|
smd: smdclk {
|
|
compatible = "atmel,at91sam9x5-clk-smd";
|
|
#clock-cells = <0>;
|
|
clocks = <&plladiv>, <&utmi>;
|
|
};
|
|
|
|
systemck {
|
|
compatible = "atmel,at91rm9200-clk-system";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ddrck: ddrck {
|
|
#clock-cells = <0>;
|
|
reg = <2>;
|
|
clocks = <&mck>;
|
|
};
|
|
|
|
lcdck: lcdck {
|
|
#clock-cells = <0>;
|
|
reg = <3>;
|
|
clocks = <&mck>;
|
|
};
|
|
|
|
smdck: smdck {
|
|
#clock-cells = <0>;
|
|
reg = <4>;
|
|
clocks = <&smd>;
|
|
};
|
|
|
|
uhpck: uhpck {
|
|
#clock-cells = <0>;
|
|
reg = <6>;
|
|
clocks = <&usb>;
|
|
};
|
|
|
|
udpck: udpck {
|
|
#clock-cells = <0>;
|
|
reg = <7>;
|
|
clocks = <&usb>;
|
|
};
|
|
|
|
pck0: pck0 {
|
|
#clock-cells = <0>;
|
|
reg = <8>;
|
|
clocks = <&prog0>;
|
|
};
|
|
|
|
pck1: pck1 {
|
|
#clock-cells = <0>;
|
|
reg = <9>;
|
|
clocks = <&prog1>;
|
|
};
|
|
|
|
pck2: pck2 {
|
|
#clock-cells = <0>;
|
|
reg = <10>;
|
|
clocks = <&prog2>;
|
|
};
|
|
};
|
|
|
|
periph32ck {
|
|
compatible = "atmel,at91sam9x5-clk-peripheral";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&h32ck>;
|
|
|
|
pioD_clk: pioD_clk {
|
|
#clock-cells = <0>;
|
|
reg = <5>;
|
|
};
|
|
|
|
usart0_clk: usart0_clk {
|
|
#clock-cells = <0>;
|
|
reg = <6>;
|
|
};
|
|
|
|
usart1_clk: usart1_clk {
|
|
#clock-cells = <0>;
|
|
reg = <7>;
|
|
};
|
|
|
|
icm_clk: icm_clk {
|
|
#clock-cells = <0>;
|
|
reg = <9>;
|
|
};
|
|
|
|
aes_clk: aes_clk {
|
|
#clock-cells = <0>;
|
|
reg = <12>;
|
|
};
|
|
|
|
tdes_clk: tdes_clk {
|
|
#clock-cells = <0>;
|
|
reg = <14>;
|
|
};
|
|
|
|
sha_clk: sha_clk {
|
|
#clock-cells = <0>;
|
|
reg = <15>;
|
|
};
|
|
|
|
matrix1_clk: matrix1_clk {
|
|
#clock-cells = <0>;
|
|
reg = <17>;
|
|
};
|
|
|
|
hsmc_clk: hsmc_clk {
|
|
#clock-cells = <0>;
|
|
reg = <22>;
|
|
};
|
|
|
|
pioA_clk: pioA_clk {
|
|
#clock-cells = <0>;
|
|
reg = <23>;
|
|
};
|
|
|
|
pioB_clk: pioB_clk {
|
|
#clock-cells = <0>;
|
|
reg = <24>;
|
|
};
|
|
|
|
pioC_clk: pioC_clk {
|
|
#clock-cells = <0>;
|
|
reg = <25>;
|
|
};
|
|
|
|
pioE_clk: pioE_clk {
|
|
#clock-cells = <0>;
|
|
reg = <26>;
|
|
};
|
|
|
|
uart0_clk: uart0_clk {
|
|
#clock-cells = <0>;
|
|
reg = <27>;
|
|
};
|
|
|
|
uart1_clk: uart1_clk {
|
|
#clock-cells = <0>;
|
|
reg = <28>;
|
|
};
|
|
|
|
usart2_clk: usart2_clk {
|
|
#clock-cells = <0>;
|
|
reg = <29>;
|
|
};
|
|
|
|
usart3_clk: usart3_clk {
|
|
#clock-cells = <0>;
|
|
reg = <30>;
|
|
};
|
|
|
|
usart4_clk: usart4_clk {
|
|
#clock-cells = <0>;
|
|
reg = <31>;
|
|
};
|
|
|
|
twi0_clk: twi0_clk {
|
|
reg = <32>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
twi1_clk: twi1_clk {
|
|
#clock-cells = <0>;
|
|
reg = <33>;
|
|
};
|
|
|
|
twi2_clk: twi2_clk {
|
|
#clock-cells = <0>;
|
|
reg = <34>;
|
|
};
|
|
|
|
mci0_clk: mci0_clk {
|
|
#clock-cells = <0>;
|
|
reg = <35>;
|
|
};
|
|
|
|
mci1_clk: mci1_clk {
|
|
#clock-cells = <0>;
|
|
reg = <36>;
|
|
};
|
|
|
|
spi0_clk: spi0_clk {
|
|
#clock-cells = <0>;
|
|
reg = <37>;
|
|
};
|
|
|
|
spi1_clk: spi1_clk {
|
|
#clock-cells = <0>;
|
|
reg = <38>;
|
|
};
|
|
|
|
spi2_clk: spi2_clk {
|
|
#clock-cells = <0>;
|
|
reg = <39>;
|
|
};
|
|
|
|
tcb0_clk: tcb0_clk {
|
|
#clock-cells = <0>;
|
|
reg = <40>;
|
|
};
|
|
|
|
tcb1_clk: tcb1_clk {
|
|
#clock-cells = <0>;
|
|
reg = <41>;
|
|
};
|
|
|
|
tcb2_clk: tcb2_clk {
|
|
#clock-cells = <0>;
|
|
reg = <42>;
|
|
};
|
|
|
|
pwm_clk: pwm_clk {
|
|
#clock-cells = <0>;
|
|
reg = <43>;
|
|
};
|
|
|
|
adc_clk: adc_clk {
|
|
#clock-cells = <0>;
|
|
reg = <44>;
|
|
};
|
|
|
|
dbgu_clk: dbgu_clk {
|
|
#clock-cells = <0>;
|
|
reg = <45>;
|
|
};
|
|
|
|
uhphs_clk: uhphs_clk {
|
|
#clock-cells = <0>;
|
|
reg = <46>;
|
|
};
|
|
|
|
udphs_clk: udphs_clk {
|
|
#clock-cells = <0>;
|
|
reg = <47>;
|
|
};
|
|
|
|
ssc0_clk: ssc0_clk {
|
|
#clock-cells = <0>;
|
|
reg = <48>;
|
|
};
|
|
|
|
ssc1_clk: ssc1_clk {
|
|
#clock-cells = <0>;
|
|
reg = <49>;
|
|
};
|
|
|
|
trng_clk: trng_clk {
|
|
#clock-cells = <0>;
|
|
reg = <53>;
|
|
};
|
|
|
|
macb0_clk: macb0_clk {
|
|
#clock-cells = <0>;
|
|
reg = <54>;
|
|
};
|
|
|
|
macb1_clk: macb1_clk {
|
|
#clock-cells = <0>;
|
|
reg = <55>;
|
|
};
|
|
|
|
fuse_clk: fuse_clk {
|
|
#clock-cells = <0>;
|
|
reg = <57>;
|
|
};
|
|
|
|
securam_clk: securam_clk {
|
|
#clock-cells = <0>;
|
|
reg = <59>;
|
|
};
|
|
|
|
smd_clk: smd_clk {
|
|
#clock-cells = <0>;
|
|
reg = <61>;
|
|
};
|
|
|
|
twi3_clk: twi3_clk {
|
|
#clock-cells = <0>;
|
|
reg = <62>;
|
|
};
|
|
|
|
catb_clk: catb_clk {
|
|
#clock-cells = <0>;
|
|
reg = <63>;
|
|
};
|
|
};
|
|
|
|
periph64ck {
|
|
compatible = "atmel,at91sam9x5-clk-peripheral";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&mck>;
|
|
|
|
dma0_clk: dma0_clk {
|
|
#clock-cells = <0>;
|
|
reg = <8>;
|
|
};
|
|
|
|
cpkcc_clk: cpkcc_clk {
|
|
#clock-cells = <0>;
|
|
reg = <10>;
|
|
};
|
|
|
|
aesb_clk: aesb_clk {
|
|
#clock-cells = <0>;
|
|
reg = <13>;
|
|
};
|
|
|
|
mpddr_clk: mpddr_clk {
|
|
#clock-cells = <0>;
|
|
reg = <16>;
|
|
};
|
|
|
|
matrix0_clk: matrix0_clk {
|
|
#clock-cells = <0>;
|
|
reg = <18>;
|
|
};
|
|
|
|
vdec_clk: vdec_clk {
|
|
#clock-cells = <0>;
|
|
reg = <19>;
|
|
};
|
|
|
|
dma1_clk: dma1_clk {
|
|
#clock-cells = <0>;
|
|
reg = <50>;
|
|
};
|
|
|
|
lcdc_clk: lcdc_clk {
|
|
#clock-cells = <0>;
|
|
reg = <51>;
|
|
};
|
|
|
|
isi_clk: isi_clk {
|
|
#clock-cells = <0>;
|
|
reg = <52>;
|
|
};
|
|
};
|
|
};
|
|
|
|
mmc0: mmc@f8000000 {
|
|
compatible = "atmel,hsmci";
|
|
reg = <0xf8000000 0x600>;
|
|
interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(0))>;
|
|
dma-names = "rxtx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&mci0_clk>;
|
|
clock-names = "mci_clk";
|
|
};
|
|
|
|
uart0: serial@f8004000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xf8004000 0x100>;
|
|
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(22))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(23))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart0>;
|
|
clocks = <&uart0_clk>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
ssc0: ssc@f8008000 {
|
|
compatible = "atmel,at91sam9g45-ssc";
|
|
reg = <0xf8008000 0x4000>;
|
|
interrupts = <48 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(26))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(27))>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&ssc0_clk>;
|
|
clock-names = "pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm0: pwm@f800c000 {
|
|
compatible = "atmel,sama5d3-pwm";
|
|
reg = <0xf800c000 0x300>;
|
|
interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
|
|
#pwm-cells = <3>;
|
|
clocks = <&pwm_clk>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@f8010000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "atmel,at91rm9200-spi";
|
|
reg = <0xf8010000 0x100>;
|
|
interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(10))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(11))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi0>;
|
|
clocks = <&spi0_clk>;
|
|
clock-names = "spi_clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@f8014000 {
|
|
compatible = "atmel,at91sam9x5-i2c";
|
|
reg = <0xf8014000 0x4000>;
|
|
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(2))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(3))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&twi0_clk>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@f8018000 {
|
|
compatible = "atmel,at91sam9x5-i2c";
|
|
reg = <0xf8018000 0x4000>;
|
|
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
|
|
AT91_XDMAC_DT_PERID(4)>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
|
|
AT91_XDMAC_DT_PERID(5)>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&twi1_clk>;
|
|
status = "disabled";
|
|
};
|
|
|
|
tcb0: timer@f801c000 {
|
|
compatible = "atmel,at91sam9x5-tcb";
|
|
reg = <0xf801c000 0x100>;
|
|
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
clocks = <&tcb0_clk>;
|
|
clock-names = "t0_clk";
|
|
};
|
|
|
|
macb0: ethernet@f8020000 {
|
|
compatible = "atmel,sama5d4-gem";
|
|
reg = <0xf8020000 0x100>;
|
|
interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_macb0_rmii>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&macb0_clk>, <&macb0_clk>;
|
|
clock-names = "hclk", "pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@f8024000 {
|
|
compatible = "atmel,at91sam9x5-i2c";
|
|
reg = <0xf8024000 0x4000>;
|
|
interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(6))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(7))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&twi2_clk>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sfr: sfr@f8028000 {
|
|
compatible = "atmel,sama5d4-sfr", "syscon";
|
|
reg = <0xf8028000 0x60>;
|
|
};
|
|
|
|
usart0: serial@f802c000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xf802c000 0x100>;
|
|
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(36))>,
|
|
<&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(37))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
|
|
clocks = <&usart0_clk>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
usart1: serial@f8030000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xf8030000 0x100>;
|
|
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(38))>,
|
|
<&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(39))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
|
|
clocks = <&usart1_clk>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc1: mmc@fc000000 {
|
|
compatible = "atmel,hsmci";
|
|
reg = <0xfc000000 0x600>;
|
|
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(1))>;
|
|
dma-names = "rxtx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&mci1_clk>;
|
|
clock-names = "mci_clk";
|
|
};
|
|
|
|
uart1: serial@fc004000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xfc004000 0x100>;
|
|
interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(24))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(25))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
clocks = <&uart1_clk>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
usart2: serial@fc008000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xfc008000 0x100>;
|
|
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(16))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(17))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
|
|
clocks = <&usart2_clk>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
usart3: serial@fc00c000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xfc00c000 0x100>;
|
|
interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(18))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(19))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart3>;
|
|
clocks = <&usart3_clk>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
usart4: serial@fc010000 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0xfc010000 0x100>;
|
|
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(20))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(21))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart4>;
|
|
clocks = <&usart4_clk>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
ssc1: ssc@fc014000 {
|
|
compatible = "atmel,at91sam9g45-ssc";
|
|
reg = <0xfc014000 0x4000>;
|
|
interrupts = <49 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(28))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(29))>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&ssc1_clk>;
|
|
clock-names = "pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@fc018000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "atmel,at91rm9200-spi";
|
|
reg = <0xfc018000 0x100>;
|
|
interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(12))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(13))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi1>;
|
|
clocks = <&spi1_clk>;
|
|
clock-names = "spi_clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi2: spi@fc01c000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "atmel,at91rm9200-spi";
|
|
reg = <0xfc01c000 0x100>;
|
|
interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
|
|
dmas = <&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(14))>,
|
|
<&dma1
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(15))>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi2>;
|
|
clocks = <&spi2_clk>;
|
|
clock-names = "spi_clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
tcb1: timer@fc020000 {
|
|
compatible = "atmel,at91sam9x5-tcb";
|
|
reg = <0xfc020000 0x100>;
|
|
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
clocks = <&tcb1_clk>;
|
|
clock-names = "t0_clk";
|
|
};
|
|
|
|
adc0: adc@fc034000 {
|
|
compatible = "atmel,at91sam9x5-adc";
|
|
reg = <0xfc034000 0x100>;
|
|
interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <
|
|
/* external trigger is conflict with USBA_VBUS */
|
|
&pinctrl_adc0_ad0
|
|
&pinctrl_adc0_ad1
|
|
&pinctrl_adc0_ad2
|
|
&pinctrl_adc0_ad3
|
|
&pinctrl_adc0_ad4
|
|
>;
|
|
clocks = <&adc_clk>,
|
|
<&adc_op_clk>;
|
|
clock-names = "adc_clk", "adc_op_clk";
|
|
atmel,adc-channels-used = <0x01f>;
|
|
atmel,adc-startup-time = <40>;
|
|
atmel,adc-use-external;
|
|
atmel,adc-vref = <3000>;
|
|
atmel,adc-res = <8 10>;
|
|
atmel,adc-sample-hold-time = <11>;
|
|
atmel,adc-res-names = "lowres", "highres";
|
|
atmel,adc-ts-pressure-threshold = <10000>;
|
|
status = "disabled";
|
|
|
|
trigger@0 {
|
|
trigger-name = "external-rising";
|
|
trigger-value = <0x1>;
|
|
trigger-external;
|
|
};
|
|
trigger@1 {
|
|
trigger-name = "external-falling";
|
|
trigger-value = <0x2>;
|
|
trigger-external;
|
|
};
|
|
trigger@2 {
|
|
trigger-name = "external-any";
|
|
trigger-value = <0x3>;
|
|
trigger-external;
|
|
};
|
|
trigger@3 {
|
|
trigger-name = "continuous";
|
|
trigger-value = <0x6>;
|
|
};
|
|
};
|
|
|
|
aes@fc044000 {
|
|
compatible = "atmel,at91sam9g46-aes";
|
|
reg = <0xfc044000 0x100>;
|
|
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
|
|
AT91_XDMAC_DT_PERID(41)>,
|
|
<&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
|
|
AT91_XDMAC_DT_PERID(40)>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&aes_clk>;
|
|
clock-names = "aes_clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
tdes@fc04c000 {
|
|
compatible = "atmel,at91sam9g46-tdes";
|
|
reg = <0xfc04c000 0x100>;
|
|
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
|
|
AT91_XDMAC_DT_PERID(42)>,
|
|
<&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
|
|
AT91_XDMAC_DT_PERID(43)>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&tdes_clk>;
|
|
clock-names = "tdes_clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
sha@fc050000 {
|
|
compatible = "atmel,at91sam9g46-sha";
|
|
reg = <0xfc050000 0x100>;
|
|
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
|
|
AT91_XDMAC_DT_PERID(44)>;
|
|
dma-names = "tx";
|
|
clocks = <&sha_clk>;
|
|
clock-names = "sha_clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
rstc@fc068600 {
|
|
compatible = "atmel,at91sam9g45-rstc";
|
|
reg = <0xfc068600 0x10>;
|
|
};
|
|
|
|
shdwc@fc068610 {
|
|
compatible = "atmel,at91sam9x5-shdwc";
|
|
reg = <0xfc068610 0x10>;
|
|
};
|
|
|
|
pit: timer@fc068630 {
|
|
compatible = "atmel,at91sam9260-pit";
|
|
reg = <0xfc068630 0x10>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
|
|
clocks = <&h32ck>;
|
|
};
|
|
|
|
watchdog@fc068640 {
|
|
compatible = "atmel,at91sam9260-wdt";
|
|
reg = <0xfc068640 0x10>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sckc@fc068650 {
|
|
compatible = "atmel,at91sam9x5-sckc";
|
|
reg = <0xfc068650 0x4>;
|
|
|
|
slow_rc_osc: slow_rc_osc {
|
|
compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-accuracy = <250000000>;
|
|
atmel,startup-time-usec = <75>;
|
|
};
|
|
|
|
slow_osc: slow_osc {
|
|
compatible = "atmel,at91sam9x5-clk-slow-osc";
|
|
#clock-cells = <0>;
|
|
clocks = <&slow_xtal>;
|
|
atmel,startup-time-usec = <1200000>;
|
|
};
|
|
|
|
clk32k: slowck {
|
|
compatible = "atmel,at91sam9x5-clk-slow";
|
|
#clock-cells = <0>;
|
|
clocks = <&slow_rc_osc &slow_osc>;
|
|
};
|
|
};
|
|
|
|
rtc@fc0686b0 {
|
|
compatible = "atmel,at91rm9200-rtc";
|
|
reg = <0xfc0686b0 0x30>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
};
|
|
|
|
dbgu: serial@fc069000 {
|
|
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
|
|
reg = <0xfc069000 0x200>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_dbgu>;
|
|
clocks = <&dbgu_clk>;
|
|
clock-names = "usart";
|
|
status = "disabled";
|
|
};
|
|
|
|
|
|
pinctrl@fc06a000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
|
|
ranges = <0xfc068000 0xfc068000 0x100
|
|
0xfc06a000 0xfc06a000 0x4000>;
|
|
/* WARNING: revisit as pin spec has changed */
|
|
atmel,mux-mask = <
|
|
/* A B C */
|
|
0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */
|
|
0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */
|
|
0xffffffff 0x3ff83fff 0xff00ffff /* pioC */
|
|
0x00000000 0x00000000 0x00000000 /* pioD */
|
|
0xffffffff 0x7fffffff 0x76fff1bf /* pioE */
|
|
>;
|
|
|
|
pioA: gpio@fc06a000 {
|
|
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
|
reg = <0xfc06a000 0x100>;
|
|
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pioA_clk>;
|
|
};
|
|
|
|
pioB: gpio@fc06b000 {
|
|
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
|
reg = <0xfc06b000 0x100>;
|
|
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pioB_clk>;
|
|
};
|
|
|
|
pioC: gpio@fc06c000 {
|
|
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
|
reg = <0xfc06c000 0x100>;
|
|
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pioC_clk>;
|
|
};
|
|
|
|
pioD: gpio@fc068000 {
|
|
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
|
reg = <0xfc068000 0x100>;
|
|
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pioD_clk>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pioE: gpio@fc06d000 {
|
|
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
|
|
reg = <0xfc06d000 0x100>;
|
|
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 1>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pioE_clk>;
|
|
};
|
|
|
|
/* pinctrl pin settings */
|
|
adc0 {
|
|
pinctrl_adc0_adtrg: adc0_adtrg {
|
|
atmel,pins =
|
|
<AT91_PIOE 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with USBA_VBUS */
|
|
};
|
|
pinctrl_adc0_ad0: adc0_ad0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
pinctrl_adc0_ad1: adc0_ad1 {
|
|
atmel,pins =
|
|
<AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
pinctrl_adc0_ad2: adc0_ad2 {
|
|
atmel,pins =
|
|
<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
pinctrl_adc0_ad3: adc0_ad3 {
|
|
atmel,pins =
|
|
<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
pinctrl_adc0_ad4: adc0_ad4 {
|
|
atmel,pins =
|
|
<AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
};
|
|
|
|
dbgu {
|
|
pinctrl_dbgu: dbgu-0 {
|
|
atmel,pins =
|
|
<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>, /* conflicts with D14 and TDI */
|
|
<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with D15 and TDO */
|
|
};
|
|
};
|
|
|
|
i2c0 {
|
|
pinctrl_i2c0: i2c0-0 {
|
|
atmel,pins =
|
|
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
|
|
AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
};
|
|
|
|
i2c1 {
|
|
pinctrl_i2c1: i2c1-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* TWD1, conflicts with UART0 RX and DIBP */
|
|
AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */
|
|
};
|
|
};
|
|
|
|
i2c2 {
|
|
pinctrl_i2c2: i2c2-0 {
|
|
atmel,pins =
|
|
<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* TWD2, conflicts with RD0 and PWML1 */
|
|
AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
|
|
};
|
|
};
|
|
|
|
isi {
|
|
pinctrl_isi_data_0_7: isi-0-data-0-7 {
|
|
atmel,pins =
|
|
<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D0 */
|
|
AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D1 */
|
|
AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D2 */
|
|
AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D3 */
|
|
AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D4 */
|
|
AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D5 */
|
|
AT91_PIOC 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D6 */
|
|
AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* ISI_D7 */
|
|
AT91_PIOB 1 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_PCK, conflict with G0_RXCK */
|
|
AT91_PIOB 3 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_VSYNC */
|
|
AT91_PIOB 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_HSYNC */
|
|
};
|
|
pinctrl_isi_data_8_9: isi-0-data-8-9 {
|
|
atmel,pins =
|
|
<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_D8, conflicts with SPI0_MISO, PWMH2 */
|
|
AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_D9, conflicts with SPI0_MOSI, PWML2 */
|
|
};
|
|
pinctrl_isi_data_10_11: isi-0-data-10-11 {
|
|
atmel,pins =
|
|
<AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE /* ISI_D10, conflicts with SPI0_SPCK, PWMH3 */
|
|
AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_D11, conflicts with SPI0_NPCS0, PWML3 */
|
|
};
|
|
};
|
|
|
|
lcd {
|
|
pinctrl_lcd_base: lcd-base-0 {
|
|
atmel,pins =
|
|
<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */
|
|
AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */
|
|
AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */
|
|
AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */
|
|
};
|
|
pinctrl_lcd_pwm: lcd-pwm-0 {
|
|
atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */
|
|
};
|
|
pinctrl_lcd_rgb444: lcd-rgb-0 {
|
|
atmel,pins =
|
|
<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
|
AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
|
AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
|
AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
|
AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
|
AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
|
AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
|
AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
|
AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
|
AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
|
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
|
AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */
|
|
};
|
|
pinctrl_lcd_rgb565: lcd-rgb-1 {
|
|
atmel,pins =
|
|
<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
|
AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
|
AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
|
AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
|
AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
|
AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
|
AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
|
AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
|
AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
|
AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
|
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
|
AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
|
AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
|
AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
|
AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
|
AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */
|
|
};
|
|
pinctrl_lcd_rgb666: lcd-rgb-2 {
|
|
atmel,pins =
|
|
<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
|
AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
|
AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
|
AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
|
AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
|
AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
|
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
|
AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
|
AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
|
AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
|
AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
|
AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
|
|
AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
|
|
AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
|
|
AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
|
|
AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
|
|
AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
|
|
AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
|
|
};
|
|
pinctrl_lcd_rgb777: lcd-rgb-3 {
|
|
atmel,pins =
|
|
/* LCDDAT0 conflicts with TMS */
|
|
<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
|
AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
|
AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
|
AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
|
AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
|
AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
|
AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
|
/* LCDDAT8 conflicts with TCK */
|
|
AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
|
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
|
AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
|
AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
|
AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
|
AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
|
AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
|
|
/* LCDDAT16 conflicts with NTRST */
|
|
AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */
|
|
AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
|
|
AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
|
|
AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
|
|
AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
|
|
AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
|
|
AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
|
|
};
|
|
pinctrl_lcd_rgb888: lcd-rgb-4 {
|
|
atmel,pins =
|
|
<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
|
AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
|
AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
|
AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
|
AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
|
AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
|
AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
|
AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
|
AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
|
AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
|
AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
|
AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
|
AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
|
AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
|
AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
|
AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
|
|
AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
|
|
AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */
|
|
AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
|
|
AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
|
|
AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
|
|
AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
|
|
AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
|
|
AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
|
|
};
|
|
};
|
|
|
|
macb0 {
|
|
pinctrl_macb0_rmii: macb0_rmii-0 {
|
|
atmel,pins =
|
|
<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TX0 */
|
|
AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TX1 */
|
|
AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RX0 */
|
|
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RX1 */
|
|
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RXDV */
|
|
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_RXER */
|
|
AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TXEN */
|
|
AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_TXCK */
|
|
AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_MDC */
|
|
AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* G0_MDIO */
|
|
>;
|
|
};
|
|
};
|
|
|
|
mmc0 {
|
|
pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* MCI0_CK, conflict with PCK1(ISI_MCK) */
|
|
AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_CDB, conflict with NAND_D0 */
|
|
AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB0, conflict with NAND_D1 */
|
|
>;
|
|
};
|
|
pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
|
|
atmel,pins =
|
|
<AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB1, conflict with NAND_D2 */
|
|
AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB2, conflict with NAND_D3 */
|
|
AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* MCI0_DB3, conflict with NAND_D4 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
mmc1 {
|
|
pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 18 AT91_PERIPH_C AT91_PINCTRL_NONE /* MCI1_CK */
|
|
AT91_PIOE 19 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_CDA */
|
|
AT91_PIOE 20 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA0 */
|
|
>;
|
|
};
|
|
pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
|
|
atmel,pins =
|
|
<AT91_PIOE 21 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA1 */
|
|
AT91_PIOE 22 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA2 */
|
|
AT91_PIOE 23 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* MCI1_DA3 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
nand0 {
|
|
pinctrl_nand: nand-0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A Read Enable */
|
|
AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC14 periph A Write Enable */
|
|
|
|
AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC17 ALE */
|
|
AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC18 CLE */
|
|
|
|
AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC15 NCS3/Chip Enable */
|
|
AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC16 NANDRDY */
|
|
AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC5 Data bit 0 */
|
|
AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 Data bit 1 */
|
|
AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 Data bit 2 */
|
|
AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 Data bit 3 */
|
|
AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC9 Data bit 4 */
|
|
AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC10 Data bit 5 */
|
|
AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC11 periph A Data bit 6 */
|
|
AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC12 periph A Data bit 7 */
|
|
};
|
|
};
|
|
|
|
spi0 {
|
|
pinctrl_spi0: spi0-0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_MISO */
|
|
AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_MOSI */
|
|
AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI0_SPCK */
|
|
>;
|
|
};
|
|
};
|
|
|
|
ssc0 {
|
|
pinctrl_ssc0_tx: ssc0_tx {
|
|
atmel,pins =
|
|
<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* TK0 */
|
|
AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE /* TF0 */
|
|
AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TD0 */
|
|
};
|
|
|
|
pinctrl_ssc0_rx: ssc0_rx {
|
|
atmel,pins =
|
|
<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* RK0 */
|
|
AT91_PIOB 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* RF0 */
|
|
AT91_PIOB 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* RD0 */
|
|
};
|
|
};
|
|
|
|
ssc1 {
|
|
pinctrl_ssc1_tx: ssc1_tx {
|
|
atmel,pins =
|
|
<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE /* TK1 */
|
|
AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE /* TF1 */
|
|
AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TD1 */
|
|
};
|
|
|
|
pinctrl_ssc1_rx: ssc1_rx {
|
|
atmel,pins =
|
|
<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* RK1 */
|
|
AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* RF1 */
|
|
AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* RD1 */
|
|
};
|
|
};
|
|
|
|
spi1 {
|
|
pinctrl_spi1: spi1-0 {
|
|
atmel,pins =
|
|
<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MISO */
|
|
AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MOSI */
|
|
AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_SPCK */
|
|
>;
|
|
};
|
|
};
|
|
|
|
spi2 {
|
|
pinctrl_spi2: spi2-0 {
|
|
atmel,pins =
|
|
<AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MISO conflicts with RTS0 */
|
|
AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MOSI conflicts with TXD0 */
|
|
AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_SPCK conflicts with RTS1 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
uart0 {
|
|
pinctrl_uart0: uart0-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */
|
|
AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */
|
|
>;
|
|
};
|
|
};
|
|
|
|
uart1 {
|
|
pinctrl_uart1: uart1-0 {
|
|
atmel,pins =
|
|
<AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_NONE /* RXD */
|
|
AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* TXD */
|
|
>;
|
|
};
|
|
};
|
|
|
|
usart0 {
|
|
pinctrl_usart0: usart0-0 {
|
|
atmel,pins =
|
|
<AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */
|
|
AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */
|
|
>;
|
|
};
|
|
pinctrl_usart0_rts: usart0_rts-0 {
|
|
atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
pinctrl_usart0_cts: usart0_cts-0 {
|
|
atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
};
|
|
|
|
usart1 {
|
|
pinctrl_usart1: usart1-0 {
|
|
atmel,pins =
|
|
<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */
|
|
AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */
|
|
>;
|
|
};
|
|
pinctrl_usart1_rts: usart1_rts-0 {
|
|
atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
pinctrl_usart1_cts: usart1_cts-0 {
|
|
atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
|
};
|
|
};
|
|
|
|
usart2 {
|
|
pinctrl_usart2: usart2-0 {
|
|
atmel,pins =
|
|
<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD - conflicts with G0_CRS, ISI_HSYNC */
|
|
AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD - conflicts with G0_COL, PCK2 */
|
|
>;
|
|
};
|
|
pinctrl_usart2_rts: usart2_rts-0 {
|
|
atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with G0_RX3, PWMH1 */
|
|
};
|
|
pinctrl_usart2_cts: usart2_cts-0 {
|
|
atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with G0_TXER, ISI_VSYNC */
|
|
};
|
|
};
|
|
|
|
usart3 {
|
|
pinctrl_usart3: usart3-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */
|
|
AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */
|
|
>;
|
|
};
|
|
};
|
|
|
|
usart4 {
|
|
pinctrl_usart4: usart4-0 {
|
|
atmel,pins =
|
|
<AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */
|
|
AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */
|
|
>;
|
|
};
|
|
pinctrl_usart4_rts: usart4_rts-0 {
|
|
atmel,pins = <AT91_PIOE 28 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with NWAIT, A19 */
|
|
};
|
|
pinctrl_usart4_cts: usart4_cts-0 {
|
|
atmel,pins = <AT91_PIOE 0 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with A0/NBS0, MCI0_CDB */
|
|
};
|
|
};
|
|
};
|
|
|
|
aic: interrupt-controller@fc06e000 {
|
|
#interrupt-cells = <3>;
|
|
compatible = "atmel,sama5d4-aic";
|
|
interrupt-controller;
|
|
reg = <0xfc06e000 0x200>;
|
|
atmel,external-irqs = <56>;
|
|
};
|
|
};
|
|
};
|
|
};
|