![Andres Salomon](/assets/img/avatar_default.png)
If there's no VSA2 (ie, if we're using tinybios or OpenFirmware), use the GLIU's P2D Range Offset Descriptor to determine how much memory we have available for the framebuffer. Originally based on a patch by Jordan Crouse. Tested with OpenFirmware; Pascal informs me that tinybios has a stub that fills in P2D_RO0. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
185 lines
4.8 KiB
C
185 lines
4.8 KiB
C
/*
|
|
* Geode GX display controller.
|
|
*
|
|
* Copyright (C) 2005 Arcom Control Systems Ltd.
|
|
*
|
|
* Portions from AMD's original 2.4 driver:
|
|
* Copyright (C) 2004 Advanced Micro Devices, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by * the
|
|
* Free Software Foundation; either version 2 of the License, or * (at your
|
|
* option) any later version.
|
|
*/
|
|
#include <linux/spinlock.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/io.h>
|
|
#include <asm/div64.h>
|
|
#include <asm/delay.h>
|
|
#include <asm/geode.h>
|
|
|
|
#include "gxfb.h"
|
|
|
|
unsigned int gx_frame_buffer_size(void)
|
|
{
|
|
unsigned int val;
|
|
|
|
if (!geode_has_vsa2()) {
|
|
uint32_t hi, lo;
|
|
|
|
/* The number of pages is (PMAX - PMIN)+1 */
|
|
rdmsr(MSR_GLIU_P2D_RO0, lo, hi);
|
|
|
|
/* PMAX */
|
|
val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
|
|
/* PMIN */
|
|
val -= (lo & 0x000fffff);
|
|
val += 1;
|
|
|
|
/* The page size is 4k */
|
|
return (val << 12);
|
|
}
|
|
|
|
/* FB size can be obtained from the VSA II */
|
|
/* Virtual register class = 0x02 */
|
|
/* VG_MEM_SIZE(512Kb units) = 0x00 */
|
|
|
|
outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
|
|
outw(VSA_VR_MEM_SIZE, VSA_VRC_INDEX);
|
|
|
|
val = (unsigned int)(inw(VSA_VRC_DATA)) & 0xFFl;
|
|
return (val << 19);
|
|
}
|
|
|
|
int gx_line_delta(int xres, int bpp)
|
|
{
|
|
/* Must be a multiple of 8 bytes. */
|
|
return (xres * (bpp >> 3) + 7) & ~0x7;
|
|
}
|
|
|
|
void gx_set_mode(struct fb_info *info)
|
|
{
|
|
struct gxfb_par *par = info->par;
|
|
u32 gcfg, dcfg;
|
|
int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
|
|
int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
|
|
|
|
/* Unlock the display controller registers. */
|
|
write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
|
|
|
|
gcfg = read_dc(par, DC_GENERAL_CFG);
|
|
dcfg = read_dc(par, DC_DISPLAY_CFG);
|
|
|
|
/* Disable the timing generator. */
|
|
dcfg &= ~DC_DISPLAY_CFG_TGEN;
|
|
write_dc(par, DC_DISPLAY_CFG, dcfg);
|
|
|
|
/* Wait for pending memory requests before disabling the FIFO load. */
|
|
udelay(100);
|
|
|
|
/* Disable FIFO load and compression. */
|
|
gcfg &= ~(DC_GENERAL_CFG_DFLE | DC_GENERAL_CFG_CMPE |
|
|
DC_GENERAL_CFG_DECE);
|
|
write_dc(par, DC_GENERAL_CFG, gcfg);
|
|
|
|
/* Setup DCLK and its divisor. */
|
|
gx_set_dclk_frequency(info);
|
|
|
|
/*
|
|
* Setup new mode.
|
|
*/
|
|
|
|
/* Clear all unused feature bits. */
|
|
gcfg &= DC_GENERAL_CFG_YUVM | DC_GENERAL_CFG_VDSE;
|
|
dcfg = 0;
|
|
|
|
/* Set FIFO priority (default 6/5) and enable. */
|
|
/* FIXME: increase fifo priority for 1280x1024 and higher modes? */
|
|
gcfg |= (6 << DC_GENERAL_CFG_DFHPEL_SHIFT) |
|
|
(5 << DC_GENERAL_CFG_DFHPSL_SHIFT) | DC_GENERAL_CFG_DFLE;
|
|
|
|
/* Framebuffer start offset. */
|
|
write_dc(par, DC_FB_ST_OFFSET, 0);
|
|
|
|
/* Line delta and line buffer length. */
|
|
write_dc(par, DC_GFX_PITCH, info->fix.line_length >> 3);
|
|
write_dc(par, DC_LINE_SIZE,
|
|
((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2);
|
|
|
|
|
|
/* Enable graphics and video data and unmask address lines. */
|
|
dcfg |= DC_DISPLAY_CFG_GDEN | DC_DISPLAY_CFG_VDEN |
|
|
DC_DISPLAY_CFG_A20M | DC_DISPLAY_CFG_A18M;
|
|
|
|
/* Set pixel format. */
|
|
switch (info->var.bits_per_pixel) {
|
|
case 8:
|
|
dcfg |= DC_DISPLAY_CFG_DISP_MODE_8BPP;
|
|
break;
|
|
case 16:
|
|
dcfg |= DC_DISPLAY_CFG_DISP_MODE_16BPP;
|
|
break;
|
|
case 32:
|
|
dcfg |= DC_DISPLAY_CFG_DISP_MODE_24BPP;
|
|
dcfg |= DC_DISPLAY_CFG_PALB;
|
|
break;
|
|
}
|
|
|
|
/* Enable timing generator. */
|
|
dcfg |= DC_DISPLAY_CFG_TGEN;
|
|
|
|
/* Horizontal and vertical timings. */
|
|
hactive = info->var.xres;
|
|
hblankstart = hactive;
|
|
hsyncstart = hblankstart + info->var.right_margin;
|
|
hsyncend = hsyncstart + info->var.hsync_len;
|
|
hblankend = hsyncend + info->var.left_margin;
|
|
htotal = hblankend;
|
|
|
|
vactive = info->var.yres;
|
|
vblankstart = vactive;
|
|
vsyncstart = vblankstart + info->var.lower_margin;
|
|
vsyncend = vsyncstart + info->var.vsync_len;
|
|
vblankend = vsyncend + info->var.upper_margin;
|
|
vtotal = vblankend;
|
|
|
|
write_dc(par, DC_H_ACTIVE_TIMING, (hactive - 1) |
|
|
((htotal - 1) << 16));
|
|
write_dc(par, DC_H_BLANK_TIMING, (hblankstart - 1) |
|
|
((hblankend - 1) << 16));
|
|
write_dc(par, DC_H_SYNC_TIMING, (hsyncstart - 1) |
|
|
((hsyncend - 1) << 16));
|
|
|
|
write_dc(par, DC_V_ACTIVE_TIMING, (vactive - 1) |
|
|
((vtotal - 1) << 16));
|
|
write_dc(par, DC_V_BLANK_TIMING, (vblankstart - 1) |
|
|
((vblankend - 1) << 16));
|
|
write_dc(par, DC_V_SYNC_TIMING, (vsyncstart - 1) |
|
|
((vsyncend - 1) << 16));
|
|
|
|
/* Write final register values. */
|
|
write_dc(par, DC_DISPLAY_CFG, dcfg);
|
|
write_dc(par, DC_GENERAL_CFG, gcfg);
|
|
|
|
gx_configure_display(info);
|
|
|
|
/* Relock display controller registers */
|
|
write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK);
|
|
}
|
|
|
|
void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno,
|
|
unsigned red, unsigned green, unsigned blue)
|
|
{
|
|
struct gxfb_par *par = info->par;
|
|
int val;
|
|
|
|
/* Hardware palette is in RGB 8-8-8 format. */
|
|
val = (red << 8) & 0xff0000;
|
|
val |= (green) & 0x00ff00;
|
|
val |= (blue >> 8) & 0x0000ff;
|
|
|
|
write_dc(par, DC_PAL_ADDRESS, regno);
|
|
write_dc(par, DC_PAL_DATA, val);
|
|
}
|