![Bart Van Assche](/assets/img/avatar_default.png)
Certain storage configurations, e.g. a sufficiently large array of hard disks in a RAID configuration, need a queue depth above 64 to achieve optimal performance. Hence make the queue depth configurable. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Tested-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
177 lines
7.2 KiB
Plaintext
177 lines
7.2 KiB
Plaintext
What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/add_target
|
|
Date: January 2, 2006
|
|
KernelVersion: 2.6.15
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: Interface for making ib_srp connect to a new target.
|
|
One can request ib_srp to connect to a new target by writing
|
|
a comma-separated list of login parameters to this sysfs
|
|
attribute. The supported parameters are:
|
|
* id_ext, a 16-digit hexadecimal number specifying the eight
|
|
byte identifier extension in the 16-byte SRP target port
|
|
identifier. The target port identifier is sent by ib_srp
|
|
to the target in the SRP_LOGIN_REQ request.
|
|
* ioc_guid, a 16-digit hexadecimal number specifying the eight
|
|
byte I/O controller GUID portion of the 16-byte target port
|
|
identifier.
|
|
* dgid, a 32-digit hexadecimal number specifying the
|
|
destination GID.
|
|
* pkey, a four-digit hexadecimal number specifying the
|
|
InfiniBand partition key.
|
|
* service_id, a 16-digit hexadecimal number specifying the
|
|
InfiniBand service ID used to establish communication with
|
|
the SRP target. How to find out the value of the service ID
|
|
is specified in the documentation of the SRP target.
|
|
* max_sect, a decimal number specifying the maximum number of
|
|
512-byte sectors to be transferred via a single SCSI command.
|
|
* max_cmd_per_lun, a decimal number specifying the maximum
|
|
number of outstanding commands for a single LUN.
|
|
* io_class, a hexadecimal number specifying the SRP I/O class.
|
|
Must be either 0xff00 (rev 10) or 0x0100 (rev 16a). The I/O
|
|
class defines the format of the SRP initiator and target
|
|
port identifiers.
|
|
* initiator_ext, a 16-digit hexadecimal number specifying the
|
|
identifier extension portion of the SRP initiator port
|
|
identifier. This data is sent by the initiator to the target
|
|
in the SRP_LOGIN_REQ request.
|
|
* cmd_sg_entries, a number in the range 1..255 that specifies
|
|
the maximum number of data buffer descriptors stored in the
|
|
SRP_CMD information unit itself. With allow_ext_sg=0 the
|
|
parameter cmd_sg_entries defines the maximum S/G list length
|
|
for a single SRP_CMD, and commands whose S/G list length
|
|
exceeds this limit after S/G list collapsing will fail.
|
|
* allow_ext_sg, whether ib_srp is allowed to include a partial
|
|
memory descriptor list in an SRP_CMD instead of the entire
|
|
list. If a partial memory descriptor list has been included
|
|
in an SRP_CMD the remaining memory descriptors are
|
|
communicated from initiator to target via an additional RDMA
|
|
transfer. Setting allow_ext_sg to 1 increases the maximum
|
|
amount of data that can be transferred between initiator and
|
|
target via a single SCSI command. Since not all SRP target
|
|
implementations support partial memory descriptor lists the
|
|
default value for this option is 0.
|
|
* sg_tablesize, a number in the range 1..2048 specifying the
|
|
maximum S/G list length the SCSI layer is allowed to pass to
|
|
ib_srp. Specifying a value that exceeds cmd_sg_entries is
|
|
only safe with partial memory descriptor list support enabled
|
|
(allow_ext_sg=1).
|
|
* comp_vector, a number in the range 0..n-1 specifying the
|
|
MSI-X completion vector. Some HCA's allocate multiple (n)
|
|
MSI-X vectors per HCA port. If the IRQ affinity masks of
|
|
these interrupts have been configured such that each MSI-X
|
|
interrupt is handled by a different CPU then the comp_vector
|
|
parameter can be used to spread the SRP completion workload
|
|
over multiple CPU's.
|
|
* tl_retry_count, a number in the range 2..7 specifying the
|
|
IB RC retry count.
|
|
* queue_size, the maximum number of commands that the
|
|
initiator is allowed to queue per SCSI host. The default
|
|
value for this parameter is 62. The lowest supported value
|
|
is 2.
|
|
|
|
What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
|
|
Date: January 2, 2006
|
|
KernelVersion: 2.6.15
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: HCA name (<hca>).
|
|
|
|
What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/port
|
|
Date: January 2, 2006
|
|
KernelVersion: 2.6.15
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: HCA port number (<port_number>).
|
|
|
|
What: /sys/class/scsi_host/host<n>/allow_ext_sg
|
|
Date: May 19, 2011
|
|
KernelVersion: 2.6.39
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: Whether ib_srp is allowed to include a partial memory
|
|
descriptor list in an SRP_CMD when communicating with an SRP
|
|
target.
|
|
|
|
What: /sys/class/scsi_host/host<n>/cmd_sg_entries
|
|
Date: May 19, 2011
|
|
KernelVersion: 2.6.39
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: Maximum number of data buffer descriptors that may be sent to
|
|
the target in a single SRP_CMD request.
|
|
|
|
What: /sys/class/scsi_host/host<n>/dgid
|
|
Date: June 17, 2006
|
|
KernelVersion: 2.6.17
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: InfiniBand destination GID used for communication with the SRP
|
|
target. Differs from orig_dgid if port redirection has happened.
|
|
|
|
What: /sys/class/scsi_host/host<n>/id_ext
|
|
Date: June 17, 2006
|
|
KernelVersion: 2.6.17
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: Eight-byte identifier extension portion of the 16-byte target
|
|
port identifier.
|
|
|
|
What: /sys/class/scsi_host/host<n>/ioc_guid
|
|
Date: June 17, 2006
|
|
KernelVersion: 2.6.17
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: Eight-byte I/O controller GUID portion of the 16-byte target
|
|
port identifier.
|
|
|
|
What: /sys/class/scsi_host/host<n>/local_ib_device
|
|
Date: November 29, 2006
|
|
KernelVersion: 2.6.19
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: Name of the InfiniBand HCA used for communicating with the
|
|
SRP target.
|
|
|
|
What: /sys/class/scsi_host/host<n>/local_ib_port
|
|
Date: November 29, 2006
|
|
KernelVersion: 2.6.19
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: Number of the HCA port used for communicating with the
|
|
SRP target.
|
|
|
|
What: /sys/class/scsi_host/host<n>/orig_dgid
|
|
Date: June 17, 2006
|
|
KernelVersion: 2.6.17
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: InfiniBand destination GID specified in the parameters
|
|
written to the add_target sysfs attribute.
|
|
|
|
What: /sys/class/scsi_host/host<n>/pkey
|
|
Date: June 17, 2006
|
|
KernelVersion: 2.6.17
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: A 16-bit number representing the InfiniBand partition key used
|
|
for communication with the SRP target.
|
|
|
|
What: /sys/class/scsi_host/host<n>/req_lim
|
|
Date: October 20, 2010
|
|
KernelVersion: 2.6.36
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: Number of requests ib_srp can send to the target before it has
|
|
to wait for more credits. For more information see also the
|
|
SRP credit algorithm in the SRP specification.
|
|
|
|
What: /sys/class/scsi_host/host<n>/service_id
|
|
Date: June 17, 2006
|
|
KernelVersion: 2.6.17
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: InfiniBand service ID used for establishing communication with
|
|
the SRP target.
|
|
|
|
What: /sys/class/scsi_host/host<n>/sgid
|
|
Date: February 1, 2014
|
|
KernelVersion: 3.13
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: InfiniBand GID of the source port used for communication with
|
|
the SRP target.
|
|
|
|
What: /sys/class/scsi_host/host<n>/zero_req_lim
|
|
Date: September 20, 2006
|
|
KernelVersion: 2.6.18
|
|
Contact: linux-rdma@vger.kernel.org
|
|
Description: Number of times the initiator had to wait before sending a
|
|
request to the target because it ran out of credits. For more
|
|
information see also the SRP credit algorithm in the SRP
|
|
specification.
|