![Linus Torvalds](/assets/img/avatar_default.png)
Pull thermal management update from Zhang Rui: "Summary: - of-thermal extension to allow drivers to register and use its functionality in a better way, without exploiting thermal core. From Lukasz Majewski. - Fix a bug in intel_soc_dts_thermal driver which calls a sleep function in interrupt handler. From Maurice Petallo. - add a thermal UAPI header file for exporting the thermal generic netlink information to user-space. From Florian Fainelli. - First round of refactoring in Exynos driver. Bartlomiej and Lukasz are attempting to make it lean and easier to understand. - New thermal driver for Rockchip (rk3288), with support for DT thermal. From Caesar Wang. - New thermal driver for Nvidia, Tegra124 SOCTHERM driver, with support for DT thermal. From Mikko Perttunen. - New cooling device, based on common clock framework. From Eduardo Valentin. - a couple of small fixes in thermal core framework. From Srinivas Pandruvada, Javi Merino, Luis Henriques. - Dropping Armada A375-Z1 SoC thermal support as the chip is not in the market, armada folks decided to drop its support. - a couple of small fixes and cleanups in int340x thermal driver" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (58 commits) thermal: provide an UAPI header file Thermal/int340x: Clear the error value of the last acpi_bus_get_device() call thermal/powerclamp: add id for braswell cpu thermal: Intel SoC DTS: Don't do thermal zone update inside spin_lock Thermal: fix platform_no_drv_owner.cocci warnings Thermal/int340x: avoid unnecessary pointer casting thermal: int3403: Delete a check before thermal_zone_device_unregister() thermal/int3400: export uuids thermal: of: Extend current of-thermal.c code to allow setting emulated temp thermal: of: Extend of-thermal to export table of trip points thermal: of: Rename struct __thermal_trip to struct thermal_trip thermal: of: Extend of-thermal.c to provide check if trip point is valid thermal: of: Extend of-thermal.c to provide number of trip points thermal: Fix error path in thermal_init() thermal: lock the thermal zone when switching governors thermal: core: ignore invalid trip temperature thermal: armada: Remove support for A375-Z1 SoC thermal: rockchip: add driver for thermal dt-bindings: document Rockchip thermal thermal: exynos: remove exynos_tmu_data.h include ...
561 lines
15 KiB
C
561 lines
15 KiB
C
/*
|
|
* lm75.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
* monitoring
|
|
* Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/thermal.h>
|
|
#include "lm75.h"
|
|
|
|
|
|
/*
|
|
* This driver handles the LM75 and compatible digital temperature sensors.
|
|
*/
|
|
|
|
enum lm75_type { /* keep sorted in alphabetical order */
|
|
adt75,
|
|
ds1775,
|
|
ds75,
|
|
ds7505,
|
|
g751,
|
|
lm75,
|
|
lm75a,
|
|
lm75b,
|
|
max6625,
|
|
max6626,
|
|
mcp980x,
|
|
stds75,
|
|
tcn75,
|
|
tmp100,
|
|
tmp101,
|
|
tmp105,
|
|
tmp112,
|
|
tmp175,
|
|
tmp275,
|
|
tmp75,
|
|
};
|
|
|
|
/* Addresses scanned */
|
|
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
|
|
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
|
|
|
|
|
|
/* The LM75 registers */
|
|
#define LM75_REG_CONF 0x01
|
|
static const u8 LM75_REG_TEMP[3] = {
|
|
0x00, /* input */
|
|
0x03, /* max */
|
|
0x02, /* hyst */
|
|
};
|
|
|
|
/* Each client has this additional data */
|
|
struct lm75_data {
|
|
struct i2c_client *client;
|
|
struct device *hwmon_dev;
|
|
struct thermal_zone_device *tz;
|
|
struct mutex update_lock;
|
|
u8 orig_conf;
|
|
u8 resolution; /* In bits, between 9 and 12 */
|
|
u8 resolution_limits;
|
|
char valid; /* !=0 if registers are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
unsigned long sample_time; /* In jiffies */
|
|
s16 temp[3]; /* Register values,
|
|
0 = input
|
|
1 = max
|
|
2 = hyst */
|
|
};
|
|
|
|
static int lm75_read_value(struct i2c_client *client, u8 reg);
|
|
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value);
|
|
static struct lm75_data *lm75_update_device(struct device *dev);
|
|
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static inline long lm75_reg_to_mc(s16 temp, u8 resolution)
|
|
{
|
|
return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8);
|
|
}
|
|
|
|
/* sysfs attributes for hwmon */
|
|
|
|
static int lm75_read_temp(void *dev, long *temp)
|
|
{
|
|
struct lm75_data *data = lm75_update_device(dev);
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
*temp = lm75_reg_to_mc(data->temp[0], data->resolution);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t show_temp(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct lm75_data *data = lm75_update_device(dev);
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index],
|
|
data->resolution));
|
|
}
|
|
|
|
static ssize_t set_temp(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct lm75_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
int nr = attr->index;
|
|
long temp;
|
|
int error;
|
|
u8 resolution;
|
|
|
|
error = kstrtol(buf, 10, &temp);
|
|
if (error)
|
|
return error;
|
|
|
|
/*
|
|
* Resolution of limit registers is assumed to be the same as the
|
|
* temperature input register resolution unless given explicitly.
|
|
*/
|
|
if (attr->index && data->resolution_limits)
|
|
resolution = data->resolution_limits;
|
|
else
|
|
resolution = data->resolution;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
|
|
data->temp[nr] = DIV_ROUND_CLOSEST(temp << (resolution - 8),
|
|
1000) << (16 - resolution);
|
|
lm75_write_value(client, LM75_REG_TEMP[nr], data->temp[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
|
|
show_temp, set_temp, 1);
|
|
static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
|
|
show_temp, set_temp, 2);
|
|
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
|
|
|
|
static struct attribute *lm75_attrs[] = {
|
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
|
|
|
|
NULL
|
|
};
|
|
ATTRIBUTE_GROUPS(lm75);
|
|
|
|
static const struct thermal_zone_of_device_ops lm75_of_thermal_ops = {
|
|
.get_temp = lm75_read_temp,
|
|
};
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
/* device probe and removal */
|
|
|
|
static int
|
|
lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct lm75_data *data;
|
|
int status;
|
|
u8 set_mask, clr_mask;
|
|
int new;
|
|
enum lm75_type kind = id->driver_data;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -EIO;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct lm75_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->client = client;
|
|
i2c_set_clientdata(client, data);
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* Set to LM75 resolution (9 bits, 1/2 degree C) and range.
|
|
* Then tweak to be more precise when appropriate.
|
|
*/
|
|
set_mask = 0;
|
|
clr_mask = LM75_SHUTDOWN; /* continuous conversions */
|
|
|
|
switch (kind) {
|
|
case adt75:
|
|
clr_mask |= 1 << 5; /* not one-shot mode */
|
|
data->resolution = 12;
|
|
data->sample_time = HZ / 8;
|
|
break;
|
|
case ds1775:
|
|
case ds75:
|
|
case stds75:
|
|
clr_mask |= 3 << 5;
|
|
set_mask |= 2 << 5; /* 11-bit mode */
|
|
data->resolution = 11;
|
|
data->sample_time = HZ;
|
|
break;
|
|
case ds7505:
|
|
set_mask |= 3 << 5; /* 12-bit mode */
|
|
data->resolution = 12;
|
|
data->sample_time = HZ / 4;
|
|
break;
|
|
case g751:
|
|
case lm75:
|
|
case lm75a:
|
|
data->resolution = 9;
|
|
data->sample_time = HZ / 2;
|
|
break;
|
|
case lm75b:
|
|
data->resolution = 11;
|
|
data->sample_time = HZ / 4;
|
|
break;
|
|
case max6625:
|
|
data->resolution = 9;
|
|
data->sample_time = HZ / 4;
|
|
break;
|
|
case max6626:
|
|
data->resolution = 12;
|
|
data->resolution_limits = 9;
|
|
data->sample_time = HZ / 4;
|
|
break;
|
|
case tcn75:
|
|
data->resolution = 9;
|
|
data->sample_time = HZ / 8;
|
|
break;
|
|
case mcp980x:
|
|
data->resolution_limits = 9;
|
|
/* fall through */
|
|
case tmp100:
|
|
case tmp101:
|
|
set_mask |= 3 << 5; /* 12-bit mode */
|
|
data->resolution = 12;
|
|
data->sample_time = HZ;
|
|
clr_mask |= 1 << 7; /* not one-shot mode */
|
|
break;
|
|
case tmp112:
|
|
set_mask |= 3 << 5; /* 12-bit mode */
|
|
clr_mask |= 1 << 7; /* not one-shot mode */
|
|
data->resolution = 12;
|
|
data->sample_time = HZ / 4;
|
|
break;
|
|
case tmp105:
|
|
case tmp175:
|
|
case tmp275:
|
|
case tmp75:
|
|
set_mask |= 3 << 5; /* 12-bit mode */
|
|
clr_mask |= 1 << 7; /* not one-shot mode */
|
|
data->resolution = 12;
|
|
data->sample_time = HZ / 2;
|
|
break;
|
|
}
|
|
|
|
/* configure as specified */
|
|
status = lm75_read_value(client, LM75_REG_CONF);
|
|
if (status < 0) {
|
|
dev_dbg(dev, "Can't read config? %d\n", status);
|
|
return status;
|
|
}
|
|
data->orig_conf = status;
|
|
new = status & ~clr_mask;
|
|
new |= set_mask;
|
|
if (status != new)
|
|
lm75_write_value(client, LM75_REG_CONF, new);
|
|
dev_dbg(dev, "Config %02x\n", new);
|
|
|
|
data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name,
|
|
data, lm75_groups);
|
|
if (IS_ERR(data->hwmon_dev))
|
|
return PTR_ERR(data->hwmon_dev);
|
|
|
|
data->tz = thermal_zone_of_sensor_register(data->hwmon_dev, 0,
|
|
data->hwmon_dev,
|
|
&lm75_of_thermal_ops);
|
|
if (IS_ERR(data->tz))
|
|
data->tz = NULL;
|
|
|
|
dev_info(dev, "%s: sensor '%s'\n",
|
|
dev_name(data->hwmon_dev), client->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lm75_remove(struct i2c_client *client)
|
|
{
|
|
struct lm75_data *data = i2c_get_clientdata(client);
|
|
|
|
thermal_zone_of_sensor_unregister(data->hwmon_dev, data->tz);
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id lm75_ids[] = {
|
|
{ "adt75", adt75, },
|
|
{ "ds1775", ds1775, },
|
|
{ "ds75", ds75, },
|
|
{ "ds7505", ds7505, },
|
|
{ "g751", g751, },
|
|
{ "lm75", lm75, },
|
|
{ "lm75a", lm75a, },
|
|
{ "lm75b", lm75b, },
|
|
{ "max6625", max6625, },
|
|
{ "max6626", max6626, },
|
|
{ "mcp980x", mcp980x, },
|
|
{ "stds75", stds75, },
|
|
{ "tcn75", tcn75, },
|
|
{ "tmp100", tmp100, },
|
|
{ "tmp101", tmp101, },
|
|
{ "tmp105", tmp105, },
|
|
{ "tmp112", tmp112, },
|
|
{ "tmp175", tmp175, },
|
|
{ "tmp275", tmp275, },
|
|
{ "tmp75", tmp75, },
|
|
{ /* LIST END */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, lm75_ids);
|
|
|
|
#define LM75A_ID 0xA1
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int lm75_detect(struct i2c_client *new_client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = new_client->adapter;
|
|
int i;
|
|
int conf, hyst, os;
|
|
bool is_lm75a = 0;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* Now, we do the remaining detection. There is no identification-
|
|
* dedicated register so we have to rely on several tricks:
|
|
* unused bits, registers cycling over 8-address boundaries,
|
|
* addresses 0x04-0x07 returning the last read value.
|
|
* The cycling+unused addresses combination is not tested,
|
|
* since it would significantly slow the detection down and would
|
|
* hardly add any value.
|
|
*
|
|
* The National Semiconductor LM75A is different than earlier
|
|
* LM75s. It has an ID byte of 0xaX (where X is the chip
|
|
* revision, with 1 being the only revision in existence) in
|
|
* register 7, and unused registers return 0xff rather than the
|
|
* last read value.
|
|
*
|
|
* Note that this function only detects the original National
|
|
* Semiconductor LM75 and the LM75A. Clones from other vendors
|
|
* aren't detected, on purpose, because they are typically never
|
|
* found on PC hardware. They are found on embedded designs where
|
|
* they can be instantiated explicitly so detection is not needed.
|
|
* The absence of identification registers on all these clones
|
|
* would make their exhaustive detection very difficult and weak,
|
|
* and odds are that the driver would bind to unsupported devices.
|
|
*/
|
|
|
|
/* Unused bits */
|
|
conf = i2c_smbus_read_byte_data(new_client, 1);
|
|
if (conf & 0xe0)
|
|
return -ENODEV;
|
|
|
|
/* First check for LM75A */
|
|
if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) {
|
|
/* LM75A returns 0xff on unused registers so
|
|
just to be sure we check for that too. */
|
|
if (i2c_smbus_read_byte_data(new_client, 4) != 0xff
|
|
|| i2c_smbus_read_byte_data(new_client, 5) != 0xff
|
|
|| i2c_smbus_read_byte_data(new_client, 6) != 0xff)
|
|
return -ENODEV;
|
|
is_lm75a = 1;
|
|
hyst = i2c_smbus_read_byte_data(new_client, 2);
|
|
os = i2c_smbus_read_byte_data(new_client, 3);
|
|
} else { /* Traditional style LM75 detection */
|
|
/* Unused addresses */
|
|
hyst = i2c_smbus_read_byte_data(new_client, 2);
|
|
if (i2c_smbus_read_byte_data(new_client, 4) != hyst
|
|
|| i2c_smbus_read_byte_data(new_client, 5) != hyst
|
|
|| i2c_smbus_read_byte_data(new_client, 6) != hyst
|
|
|| i2c_smbus_read_byte_data(new_client, 7) != hyst)
|
|
return -ENODEV;
|
|
os = i2c_smbus_read_byte_data(new_client, 3);
|
|
if (i2c_smbus_read_byte_data(new_client, 4) != os
|
|
|| i2c_smbus_read_byte_data(new_client, 5) != os
|
|
|| i2c_smbus_read_byte_data(new_client, 6) != os
|
|
|| i2c_smbus_read_byte_data(new_client, 7) != os)
|
|
return -ENODEV;
|
|
}
|
|
/*
|
|
* It is very unlikely that this is a LM75 if both
|
|
* hysteresis and temperature limit registers are 0.
|
|
*/
|
|
if (hyst == 0 && os == 0)
|
|
return -ENODEV;
|
|
|
|
/* Addresses cycling */
|
|
for (i = 8; i <= 248; i += 40) {
|
|
if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
|
|
|| i2c_smbus_read_byte_data(new_client, i + 2) != hyst
|
|
|| i2c_smbus_read_byte_data(new_client, i + 3) != os)
|
|
return -ENODEV;
|
|
if (is_lm75a && i2c_smbus_read_byte_data(new_client, i + 7)
|
|
!= LM75A_ID)
|
|
return -ENODEV;
|
|
}
|
|
|
|
strlcpy(info->type, is_lm75a ? "lm75a" : "lm75", I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int lm75_suspend(struct device *dev)
|
|
{
|
|
int status;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
status = lm75_read_value(client, LM75_REG_CONF);
|
|
if (status < 0) {
|
|
dev_dbg(&client->dev, "Can't read config? %d\n", status);
|
|
return status;
|
|
}
|
|
status = status | LM75_SHUTDOWN;
|
|
lm75_write_value(client, LM75_REG_CONF, status);
|
|
return 0;
|
|
}
|
|
|
|
static int lm75_resume(struct device *dev)
|
|
{
|
|
int status;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
status = lm75_read_value(client, LM75_REG_CONF);
|
|
if (status < 0) {
|
|
dev_dbg(&client->dev, "Can't read config? %d\n", status);
|
|
return status;
|
|
}
|
|
status = status & ~LM75_SHUTDOWN;
|
|
lm75_write_value(client, LM75_REG_CONF, status);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops lm75_dev_pm_ops = {
|
|
.suspend = lm75_suspend,
|
|
.resume = lm75_resume,
|
|
};
|
|
#define LM75_DEV_PM_OPS (&lm75_dev_pm_ops)
|
|
#else
|
|
#define LM75_DEV_PM_OPS NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct i2c_driver lm75_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "lm75",
|
|
.pm = LM75_DEV_PM_OPS,
|
|
},
|
|
.probe = lm75_probe,
|
|
.remove = lm75_remove,
|
|
.id_table = lm75_ids,
|
|
.detect = lm75_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
/* register access */
|
|
|
|
/*
|
|
* All registers are word-sized, except for the configuration register.
|
|
* LM75 uses a high-byte first convention, which is exactly opposite to
|
|
* the SMBus standard.
|
|
*/
|
|
static int lm75_read_value(struct i2c_client *client, u8 reg)
|
|
{
|
|
if (reg == LM75_REG_CONF)
|
|
return i2c_smbus_read_byte_data(client, reg);
|
|
else
|
|
return i2c_smbus_read_word_swapped(client, reg);
|
|
}
|
|
|
|
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
|
|
{
|
|
if (reg == LM75_REG_CONF)
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
else
|
|
return i2c_smbus_write_word_swapped(client, reg, value);
|
|
}
|
|
|
|
static struct lm75_data *lm75_update_device(struct device *dev)
|
|
{
|
|
struct lm75_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
struct lm75_data *ret = data;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + data->sample_time)
|
|
|| !data->valid) {
|
|
int i;
|
|
dev_dbg(&client->dev, "Starting lm75 update\n");
|
|
|
|
for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
|
|
int status;
|
|
|
|
status = lm75_read_value(client, LM75_REG_TEMP[i]);
|
|
if (unlikely(status < 0)) {
|
|
dev_dbg(dev,
|
|
"LM75: Failed to read value: reg %d, error %d\n",
|
|
LM75_REG_TEMP[i], status);
|
|
ret = ERR_PTR(status);
|
|
data->valid = 0;
|
|
goto abort;
|
|
}
|
|
data->temp[i] = status;
|
|
}
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
abort:
|
|
mutex_unlock(&data->update_lock);
|
|
return ret;
|
|
}
|
|
|
|
module_i2c_driver(lm75_driver);
|
|
|
|
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
|
|
MODULE_DESCRIPTION("LM75 driver");
|
|
MODULE_LICENSE("GPL");
|