![Yuriy Kolerov](/assets/img/avatar_default.png)
Currently Kconfig knob ARC_NUMBER_OF_INTERRUPTS is used as indicator of hard irq count. But it is flawed that it doesn't affect - NR_IRQS : for number of virtual interrupts - NR_CPU_IRQS : for number of hardware interrupts Moreover the actual hardware irq count might still not be same as ARC_NUMBER_OF_INTERRUPTS. So use the information availble in the Build Configuration Registers and get rid of the Kconfig option. We still need "some" build time info about irq count to set up sufficient number of vector table entries. This is done with a sufficiently large NR_CPU_IRQS which will eventually be used soley for that purpose (subsequent patches will remove its usage elsewhere) So to summarize what this patch does: * NR_CPU_IRQS defines a maximum number of hardware interrupts. * Remove ARC_NUMBER_OF_INTERRUPTS option and create interrupts table for all possible hardware interrupts. * Increase a maximum number of virtual IRQs to 512. ARCv2 can support 240 interrupts in the core interrupts controllers and 128 interrupts in IDU. Thus 512 virtual IRQs must be enough for most configurations of boards. This patch leads to NR_CPU_IRQS in 2 places, to reduce the overall churn. The next patch will remove the 2nd definition anyways. Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked the changelog a bit]
588 lines
14 KiB
Plaintext
588 lines
14 KiB
Plaintext
#
|
|
# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
|
|
#
|
|
# This program is free software; you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License version 2 as
|
|
# published by the Free Software Foundation.
|
|
#
|
|
|
|
config ARC
|
|
def_bool y
|
|
select ARC_TIMERS
|
|
select ARCH_HAS_SG_CHAIN
|
|
select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
|
|
select BUILDTIME_EXTABLE_SORT
|
|
select CLONE_BACKWARDS
|
|
select COMMON_CLK
|
|
select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC)
|
|
select GENERIC_CLOCKEVENTS
|
|
select GENERIC_FIND_FIRST_BIT
|
|
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
|
|
select GENERIC_IRQ_SHOW
|
|
select GENERIC_PCI_IOMAP
|
|
select GENERIC_PENDING_IRQ if SMP
|
|
select GENERIC_SMP_IDLE_THREAD
|
|
select HAVE_ARCH_KGDB
|
|
select HAVE_ARCH_TRACEHOOK
|
|
select HAVE_FUTEX_CMPXCHG
|
|
select HAVE_IOREMAP_PROT
|
|
select HAVE_KPROBES
|
|
select HAVE_KRETPROBES
|
|
select HAVE_MEMBLOCK
|
|
select HAVE_MOD_ARCH_SPECIFIC
|
|
select HAVE_OPROFILE
|
|
select HAVE_PERF_EVENTS
|
|
select HANDLE_DOMAIN_IRQ
|
|
select IRQ_DOMAIN
|
|
select MODULES_USE_ELF_RELA
|
|
select NO_BOOTMEM
|
|
select OF
|
|
select OF_EARLY_FLATTREE
|
|
select OF_RESERVED_MEM
|
|
select PERF_USE_VMALLOC
|
|
select HAVE_DEBUG_STACKOVERFLOW
|
|
select HAVE_GENERIC_DMA_COHERENT
|
|
select HAVE_KERNEL_GZIP
|
|
select HAVE_KERNEL_LZMA
|
|
|
|
config MIGHT_HAVE_PCI
|
|
bool
|
|
|
|
config TRACE_IRQFLAGS_SUPPORT
|
|
def_bool y
|
|
|
|
config LOCKDEP_SUPPORT
|
|
def_bool y
|
|
|
|
config SCHED_OMIT_FRAME_POINTER
|
|
def_bool y
|
|
|
|
config GENERIC_CSUM
|
|
def_bool y
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
def_bool y
|
|
|
|
config ARCH_DISCONTIGMEM_ENABLE
|
|
def_bool n
|
|
|
|
config ARCH_FLATMEM_ENABLE
|
|
def_bool y
|
|
|
|
config MMU
|
|
def_bool y
|
|
|
|
config NO_IOPORT_MAP
|
|
def_bool y
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
def_bool y
|
|
|
|
config GENERIC_HWEIGHT
|
|
def_bool y
|
|
|
|
config STACKTRACE_SUPPORT
|
|
def_bool y
|
|
select STACKTRACE
|
|
|
|
config HAVE_ARCH_TRANSPARENT_HUGEPAGE
|
|
def_bool y
|
|
depends on ARC_MMU_V4
|
|
|
|
source "init/Kconfig"
|
|
source "kernel/Kconfig.freezer"
|
|
|
|
menu "ARC Architecture Configuration"
|
|
|
|
menu "ARC Platform/SoC/Board"
|
|
|
|
source "arch/arc/plat-sim/Kconfig"
|
|
source "arch/arc/plat-tb10x/Kconfig"
|
|
source "arch/arc/plat-axs10x/Kconfig"
|
|
#New platform adds here
|
|
source "arch/arc/plat-eznps/Kconfig"
|
|
|
|
endmenu
|
|
|
|
choice
|
|
prompt "ARC Instruction Set"
|
|
default ISA_ARCOMPACT
|
|
|
|
config ISA_ARCOMPACT
|
|
bool "ARCompact ISA"
|
|
select CPU_NO_EFFICIENT_FFS
|
|
help
|
|
The original ARC ISA of ARC600/700 cores
|
|
|
|
config ISA_ARCV2
|
|
bool "ARC ISA v2"
|
|
select ARC_TIMERS_64BIT
|
|
help
|
|
ISA for the Next Generation ARC-HS cores
|
|
|
|
endchoice
|
|
|
|
menu "ARC CPU Configuration"
|
|
|
|
choice
|
|
prompt "ARC Core"
|
|
default ARC_CPU_770 if ISA_ARCOMPACT
|
|
default ARC_CPU_HS if ISA_ARCV2
|
|
|
|
if ISA_ARCOMPACT
|
|
|
|
config ARC_CPU_750D
|
|
bool "ARC750D"
|
|
select ARC_CANT_LLSC
|
|
help
|
|
Support for ARC750 core
|
|
|
|
config ARC_CPU_770
|
|
bool "ARC770"
|
|
select ARC_HAS_SWAPE
|
|
help
|
|
Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
|
|
This core has a bunch of cool new features:
|
|
-MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4)
|
|
Shared Address Spaces (for sharing TLB entires in MMU)
|
|
-Caches: New Prog Model, Region Flush
|
|
-Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
|
|
|
|
endif #ISA_ARCOMPACT
|
|
|
|
config ARC_CPU_HS
|
|
bool "ARC-HS"
|
|
depends on ISA_ARCV2
|
|
help
|
|
Support for ARC HS38x Cores based on ARCv2 ISA
|
|
The notable features are:
|
|
- SMP configurations of upto 4 core with coherency
|
|
- Optional L2 Cache and IO-Coherency
|
|
- Revised Interrupt Architecture (multiple priorites, reg banks,
|
|
auto stack switch, auto regfile save/restore)
|
|
- MMUv4 (PIPT dcache, Huge Pages)
|
|
- Instructions for
|
|
* 64bit load/store: LDD, STD
|
|
* Hardware assisted divide/remainder: DIV, REM
|
|
* Function prologue/epilogue: ENTER_S, LEAVE_S
|
|
* IRQ enable/disable: CLRI, SETI
|
|
* pop count: FFS, FLS
|
|
* SETcc, BMSKN, XBFU...
|
|
|
|
endchoice
|
|
|
|
config CPU_BIG_ENDIAN
|
|
bool "Enable Big Endian Mode"
|
|
default n
|
|
help
|
|
Build kernel for Big Endian Mode of ARC CPU
|
|
|
|
config SMP
|
|
bool "Symmetric Multi-Processing"
|
|
default n
|
|
select ARC_HAS_COH_CACHES if ISA_ARCV2
|
|
select ARC_MCIP if ISA_ARCV2
|
|
help
|
|
This enables support for systems with more than one CPU.
|
|
|
|
if SMP
|
|
|
|
config ARC_HAS_COH_CACHES
|
|
def_bool n
|
|
|
|
config NR_CPUS
|
|
int "Maximum number of CPUs (2-4096)"
|
|
range 2 4096
|
|
default "4"
|
|
|
|
config ARC_SMP_HALT_ON_RESET
|
|
bool "Enable Halt-on-reset boot mode"
|
|
default y if ARC_UBOOT_SUPPORT
|
|
help
|
|
In SMP configuration cores can be configured as Halt-on-reset
|
|
or they could all start at same time. For Halt-on-reset, non
|
|
masters are parked until Master kicks them so they can start of
|
|
at designated entry point. For other case, all jump to common
|
|
entry point and spin wait for Master's signal.
|
|
|
|
endif #SMP
|
|
|
|
config ARC_MCIP
|
|
bool "ARConnect Multicore IP (MCIP) Support "
|
|
depends on ISA_ARCV2
|
|
default y if SMP
|
|
help
|
|
This IP block enables SMP in ARC-HS38 cores.
|
|
It provides for cross-core interrupts, multi-core debug
|
|
hardware semaphores, shared memory,....
|
|
|
|
menuconfig ARC_CACHE
|
|
bool "Enable Cache Support"
|
|
default y
|
|
# if SMP, cache enabled ONLY if ARC implementation has cache coherency
|
|
depends on !SMP || ARC_HAS_COH_CACHES
|
|
|
|
if ARC_CACHE
|
|
|
|
config ARC_CACHE_LINE_SHIFT
|
|
int "Cache Line Length (as power of 2)"
|
|
range 5 7
|
|
default "6"
|
|
help
|
|
Starting with ARC700 4.9, Cache line length is configurable,
|
|
This option specifies "N", with Line-len = 2 power N
|
|
So line lengths of 32, 64, 128 are specified by 5,6,7, respectively
|
|
Linux only supports same line lengths for I and D caches.
|
|
|
|
config ARC_HAS_ICACHE
|
|
bool "Use Instruction Cache"
|
|
default y
|
|
|
|
config ARC_HAS_DCACHE
|
|
bool "Use Data Cache"
|
|
default y
|
|
|
|
config ARC_CACHE_PAGES
|
|
bool "Per Page Cache Control"
|
|
default y
|
|
depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE
|
|
help
|
|
This can be used to over-ride the global I/D Cache Enable on a
|
|
per-page basis (but only for pages accessed via MMU such as
|
|
Kernel Virtual address or User Virtual Address)
|
|
TLB entries have a per-page Cache Enable Bit.
|
|
Note that Global I/D ENABLE + Per Page DISABLE works but corollary
|
|
Global DISABLE + Per Page ENABLE won't work
|
|
|
|
config ARC_CACHE_VIPT_ALIASING
|
|
bool "Support VIPT Aliasing D$"
|
|
depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
|
|
default n
|
|
|
|
endif #ARC_CACHE
|
|
|
|
config ARC_HAS_ICCM
|
|
bool "Use ICCM"
|
|
help
|
|
Single Cycle RAMS to store Fast Path Code
|
|
default n
|
|
|
|
config ARC_ICCM_SZ
|
|
int "ICCM Size in KB"
|
|
default "64"
|
|
depends on ARC_HAS_ICCM
|
|
|
|
config ARC_HAS_DCCM
|
|
bool "Use DCCM"
|
|
help
|
|
Single Cycle RAMS to store Fast Path Data
|
|
default n
|
|
|
|
config ARC_DCCM_SZ
|
|
int "DCCM Size in KB"
|
|
default "64"
|
|
depends on ARC_HAS_DCCM
|
|
|
|
config ARC_DCCM_BASE
|
|
hex "DCCM map address"
|
|
default "0xA0000000"
|
|
depends on ARC_HAS_DCCM
|
|
|
|
choice
|
|
prompt "MMU Version"
|
|
default ARC_MMU_V3 if ARC_CPU_770
|
|
default ARC_MMU_V2 if ARC_CPU_750D
|
|
default ARC_MMU_V4 if ARC_CPU_HS
|
|
|
|
if ISA_ARCOMPACT
|
|
|
|
config ARC_MMU_V1
|
|
bool "MMU v1"
|
|
help
|
|
Orig ARC700 MMU
|
|
|
|
config ARC_MMU_V2
|
|
bool "MMU v2"
|
|
help
|
|
Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio
|
|
when 2 D-TLB and 1 I-TLB entries index into same 2way set.
|
|
|
|
config ARC_MMU_V3
|
|
bool "MMU v3"
|
|
depends on ARC_CPU_770
|
|
help
|
|
Introduced with ARC700 4.10: New Features
|
|
Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
|
|
Shared Address Spaces (SASID)
|
|
|
|
endif
|
|
|
|
config ARC_MMU_V4
|
|
bool "MMU v4"
|
|
depends on ISA_ARCV2
|
|
|
|
endchoice
|
|
|
|
|
|
choice
|
|
prompt "MMU Page Size"
|
|
default ARC_PAGE_SIZE_8K
|
|
|
|
config ARC_PAGE_SIZE_8K
|
|
bool "8KB"
|
|
help
|
|
Choose between 8k vs 16k
|
|
|
|
config ARC_PAGE_SIZE_16K
|
|
bool "16KB"
|
|
depends on ARC_MMU_V3 || ARC_MMU_V4
|
|
|
|
config ARC_PAGE_SIZE_4K
|
|
bool "4KB"
|
|
depends on ARC_MMU_V3 || ARC_MMU_V4
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "MMU Super Page Size"
|
|
depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE
|
|
default ARC_HUGEPAGE_2M
|
|
|
|
config ARC_HUGEPAGE_2M
|
|
bool "2MB"
|
|
|
|
config ARC_HUGEPAGE_16M
|
|
bool "16MB"
|
|
|
|
endchoice
|
|
|
|
config NODES_SHIFT
|
|
int "Maximum NUMA Nodes (as a power of 2)"
|
|
default "0" if !DISCONTIGMEM
|
|
default "1" if DISCONTIGMEM
|
|
depends on NEED_MULTIPLE_NODES
|
|
---help---
|
|
Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
|
|
zones.
|
|
|
|
if ISA_ARCOMPACT
|
|
|
|
config ARC_COMPACT_IRQ_LEVELS
|
|
bool "Setup Timer IRQ as high Priority"
|
|
default n
|
|
# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
|
|
depends on !SMP
|
|
|
|
config ARC_FPU_SAVE_RESTORE
|
|
bool "Enable FPU state persistence across context switch"
|
|
default n
|
|
help
|
|
Double Precision Floating Point unit had dedictaed regs which
|
|
need to be saved/restored across context-switch.
|
|
Note that ARC FPU is overly simplistic, unlike say x86, which has
|
|
hardware pieces to allow software to conditionally save/restore,
|
|
based on actual usage of FPU by a task. Thus our implemn does
|
|
this for all tasks in system.
|
|
|
|
endif #ISA_ARCOMPACT
|
|
|
|
config ARC_CANT_LLSC
|
|
def_bool n
|
|
|
|
config ARC_HAS_LLSC
|
|
bool "Insn: LLOCK/SCOND (efficient atomic ops)"
|
|
default y
|
|
depends on !ARC_CANT_LLSC
|
|
|
|
config ARC_HAS_SWAPE
|
|
bool "Insn: SWAPE (endian-swap)"
|
|
default y
|
|
|
|
if ISA_ARCV2
|
|
|
|
config ARC_HAS_LL64
|
|
bool "Insn: 64bit LDD/STD"
|
|
help
|
|
Enable gcc to generate 64-bit load/store instructions
|
|
ISA mandates even/odd registers to allow encoding of two
|
|
dest operands with 2 possible source operands.
|
|
default y
|
|
|
|
config ARC_HAS_DIV_REM
|
|
bool "Insn: div, divu, rem, remu"
|
|
default y
|
|
|
|
endif # ISA_ARCV2
|
|
|
|
endmenu # "ARC CPU Configuration"
|
|
|
|
config LINUX_LINK_BASE
|
|
hex "Linux Link Address"
|
|
default "0x80000000"
|
|
help
|
|
ARC700 divides the 32 bit phy address space into two equal halves
|
|
-Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU
|
|
-Upper 2G (0x8000_0000 onwards) is untranslated, for kernel
|
|
Typically Linux kernel is linked at the start of untransalted addr,
|
|
hence the default value of 0x8zs.
|
|
However some customers have peripherals mapped at this addr, so
|
|
Linux needs to be scooted a bit.
|
|
If you don't know what the above means, leave this setting alone.
|
|
This needs to match memory start address specified in Device Tree
|
|
|
|
config HIGHMEM
|
|
bool "High Memory Support"
|
|
select ARCH_DISCONTIGMEM_ENABLE
|
|
help
|
|
With ARC 2G:2G address split, only upper 2G is directly addressable by
|
|
kernel. Enable this to potentially allow access to rest of 2G and PAE
|
|
in future
|
|
|
|
config ARC_HAS_PAE40
|
|
bool "Support for the 40-bit Physical Address Extension"
|
|
default n
|
|
depends on ISA_ARCV2
|
|
help
|
|
Enable access to physical memory beyond 4G, only supported on
|
|
ARC cores with 40 bit Physical Addressing support
|
|
|
|
config ARCH_PHYS_ADDR_T_64BIT
|
|
def_bool ARC_HAS_PAE40
|
|
|
|
config ARCH_DMA_ADDR_T_64BIT
|
|
bool
|
|
|
|
config ARC_PLAT_NEEDS_PHYS_TO_DMA
|
|
bool
|
|
|
|
config ARC_KVADDR_SIZE
|
|
int "Kernel Virtaul Address Space size (MB)"
|
|
range 0 512
|
|
default "256"
|
|
help
|
|
The kernel address space is carved out of 256MB of translated address
|
|
space for catering to vmalloc, modules, pkmap, fixmap. This however may
|
|
not suffice vmalloc requirements of a 4K CPU EZChip system. So allow
|
|
this to be stretched to 512 MB (by extending into the reserved
|
|
kernel-user gutter)
|
|
|
|
config ARC_CURR_IN_REG
|
|
bool "Dedicate Register r25 for current_task pointer"
|
|
default y
|
|
help
|
|
This reserved Register R25 to point to Current Task in
|
|
kernel mode. This saves memory access for each such access
|
|
|
|
|
|
config ARC_EMUL_UNALIGNED
|
|
bool "Emulate unaligned memory access (userspace only)"
|
|
default N
|
|
select SYSCTL_ARCH_UNALIGN_NO_WARN
|
|
select SYSCTL_ARCH_UNALIGN_ALLOW
|
|
depends on ISA_ARCOMPACT
|
|
help
|
|
This enables misaligned 16 & 32 bit memory access from user space.
|
|
Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide
|
|
potential bugs in code
|
|
|
|
config HZ
|
|
int "Timer Frequency"
|
|
default 100
|
|
|
|
config ARC_METAWARE_HLINK
|
|
bool "Support for Metaware debugger assisted Host access"
|
|
default n
|
|
help
|
|
This options allows a Linux userland apps to directly access
|
|
host file system (open/creat/read/write etc) with help from
|
|
Metaware Debugger. This can come in handy for Linux-host communication
|
|
when there is no real usable peripheral such as EMAC.
|
|
|
|
menuconfig ARC_DBG
|
|
bool "ARC debugging"
|
|
default y
|
|
|
|
if ARC_DBG
|
|
|
|
config ARC_DW2_UNWIND
|
|
bool "Enable DWARF specific kernel stack unwind"
|
|
default y
|
|
select KALLSYMS
|
|
help
|
|
Compiles the kernel with DWARF unwind information and can be used
|
|
to get stack backtraces.
|
|
|
|
If you say Y here the resulting kernel image will be slightly larger
|
|
but not slower, and it will give very useful debugging information.
|
|
If you don't debug the kernel, you can say N, but we may not be able
|
|
to solve problems without frame unwind information
|
|
|
|
config ARC_DBG_TLB_PARANOIA
|
|
bool "Paranoia Checks in Low Level TLB Handlers"
|
|
default n
|
|
|
|
endif
|
|
|
|
config ARC_UBOOT_SUPPORT
|
|
bool "Support uboot arg Handling"
|
|
default n
|
|
help
|
|
ARC Linux by default checks for uboot provided args as pointers to
|
|
external cmdline or DTB. This however breaks in absence of uboot,
|
|
when booting from Metaware debugger directly, as the registers are
|
|
not zeroed out on reset by mdb and/or ARCv2 based cores. The bogus
|
|
registers look like uboot args to kernel which then chokes.
|
|
So only enable the uboot arg checking/processing if users are sure
|
|
of uboot being in play.
|
|
|
|
config ARC_BUILTIN_DTB_NAME
|
|
string "Built in DTB"
|
|
help
|
|
Set the name of the DTB to embed in the vmlinux binary
|
|
Leaving it blank selects the minimal "skeleton" dtb
|
|
|
|
source "kernel/Kconfig.preempt"
|
|
|
|
menu "Executable file formats"
|
|
source "fs/Kconfig.binfmt"
|
|
endmenu
|
|
|
|
endmenu # "ARC Architecture Configuration"
|
|
|
|
source "mm/Kconfig"
|
|
|
|
config FORCE_MAX_ZONEORDER
|
|
int "Maximum zone order"
|
|
default "12" if ARC_HUGEPAGE_16M
|
|
default "11"
|
|
|
|
source "net/Kconfig"
|
|
source "drivers/Kconfig"
|
|
|
|
menu "Bus Support"
|
|
|
|
config PCI
|
|
bool "PCI support" if MIGHT_HAVE_PCI
|
|
help
|
|
PCI is the name of a bus system, i.e., the way the CPU talks to
|
|
the other stuff inside your box. Find out if your board/platform
|
|
has PCI.
|
|
|
|
Note: PCIe support for Synopsys Device will be available only
|
|
when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
|
|
say Y, otherwise N.
|
|
|
|
config PCI_SYSCALL
|
|
def_bool PCI
|
|
|
|
source "drivers/pci/Kconfig"
|
|
|
|
endmenu
|
|
|
|
source "fs/Kconfig"
|
|
source "arch/arc/Kconfig.debug"
|
|
source "security/Kconfig"
|
|
source "crypto/Kconfig"
|
|
source "lib/Kconfig"
|
|
source "kernel/power/Kconfig"
|