redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/include/linux/platform_data
History
Roger Quadros 7d5929c1f3 mtd: nand: omap: Revert to using software ECC by default 
For v3.12 and prior, 1-bit Hamming code ECC via software was the
default choice. Commit c66d039197 in v3.13 changed the behaviour
to use 1-bit Hamming code via Hardware using a different ECC layout
i.e. (ROM code layout) than what is used by software ECC.

This ECC layout change causes NAND filesystems created in v3.12
and prior to be unusable in v3.13 and later. So revert back to
using software ECC by default if an ECC scheme is not explicitely
specified.

This defect can be observed on the following boards during legacy boot

-omap3beagle
-omap3touchbook
-overo
-am3517crane
-devkit8000
-ldp
-3430sdp

Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
 		2014-08-25 16:15:32 -07:00
..
ad5449.h iio:dac: Add support for the ad5449 2012-10-19 18:46:51 +01:00
ad5755.h
…
ad7266.h
…
ad7291.h staging:iio:ad7291: Move out of staging 2014-07-08 21:17:30 +01:00
ad7298.h staging:iio: Move the ad7298 driver out of staging 2012-11-19 22:22:15 +00:00
ad7303.h iio:dac: Add support for the AD7303 2013-06-11 20:25:58 +01:00
ad7791.h
…
ad7793.h staging:iio: Move ad7793 driver out of staging 2012-11-30 12:57:08 +00:00
ad7887.h staging:iio: Move the ad7887 driver out of staging 2012-11-05 20:39:54 +00:00
adau17x1.h ASoC: Add ADAU1381/ADAU1781 audio CODEC support 2014-05-27 20:54:51 +01:00
adau1977.h ASoC: Add ADAU1977 CODEC driver 2014-02-19 13:36:15 +09:00
ads7828.h hwmon: (ads7828) driver cleanup 2012-12-05 10:55:54 -08:00
arm-ux500-pm.h ARM: ux500: move PM-related PRCMU functions to machine 2013-04-08 13:57:53 +02:00
asoc-imx-ssi.h ARM: imx: remove header file mach/irqs.h 2012-10-15 10:05:43 +08:00
asoc-kirkwood.h
…
asoc-mx27vis.h
…
asoc-palm27x.h
…
asoc-s3c.h ASoC: samsung: remove s5pc100 related codes 2014-07-14 19:05:00 +01:00
asoc-s3c24xx_simtec.h ASoC: s3c24xx: Remove invalid file reference 2014-02-25 21:29:31 +09:00
asoc-ti-mcbsp.h ASoC: mcbsp: Trivial cleanup in asoc-ti-mcbsp.h 2013-12-30 11:50:16 +00:00
asoc-ux500-msp.h ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion 2014-01-07 15:36:09 +00:00
at24.h misc: (at24) move header to linux/platform_data/ 2013-09-30 06:02:34 +02:00
at91_adc.h iio: adc: at91_adc: Add support for touchscreens without TSMR 2014-05-07 18:28:40 +02:00
ata-pxa.h
…
ata-samsung_cf.h ata: pata_samsung_cf: removes s5pc100 related ata codes 2014-06-30 10:48:08 -04:00
atmel.h TTY/Serial driver patches for 3.16-rc1 2014-06-03 09:01:02 -07:00
bd6107.h backlight: Add ROHM BD6107 backlight driver 2013-07-16 13:01:19 +09:00
brcmfmac-sdio.h brcmfmac: abstract tx packet processing functions 2013-08-15 16:07:55 -04:00
bt-nokia-h4p.h staging/bluetooth: Add hci_h4p driver 2014-02-07 10:13:53 -08:00
camera-mx2.h
…
camera-mx3.h [media] V4L2: mx3_camera: add support for asynchronous subdevice registration 2013-08-18 09:06:37 -03:00
camera-pxa.h
…
camera-rcar.h [media] V4L2: soc_camera: Renesas R-Car VIN driver 2013-08-18 09:01:10 -03:00
clk-integrator.h ARM: integrator: switch to fetch clocks from device tree 2014-02-13 11:20:42 +01:00
clk-lpss.h ACPI / LPSS: register clock device for Lynxpoint DMA properly 2013-05-14 10:23:58 +05:30
clk-realview.h
…
clk-u300.h
…
clk-ux500.h clk: ux500: Copy u8500_clk_init() ready for DT enablement 2013-09-26 11:05:26 +02:00
coda.h media: coda: use genalloc API 2013-04-29 18:28:13 -07:00
crypto-atmel.h ARM: AT91SAM9G45: same platform data structure for all crypto peripherals 2013-03-10 16:46:41 +08:00
crypto-ux500.h ARM: plat-nomadik: move DMA40 header to <linux/platform_data> 2012-11-05 09:55:32 +01:00
cyttsp4.h Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices 2013-06-30 21:24:21 -07:00
davinci_asp.h ASoC: davinci-mcasp: Rename platform data struct 2014-02-03 18:26:59 +00:00
db8500_thermal.h Thermal: Add ST-Ericsson DB8500 thermal driver. 2012-11-15 20:50:34 +08:00
dma-atmel.h dmaengine: at_hdmac: extend hardware handshaking interface identification 2013-07-05 11:40:29 +05:30
dma-coh901318.h dma: coh901318: create a proper platform data file 2013-01-07 17:35:57 +01:00
dma-ep93xx.h
…
dma-imx-sdma.h dma: imx-sdma: Add sdma firmware version 2 support 2013-12-16 09:18:47 +05:30
dma-imx.h Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma 2014-08-11 07:14:01 -07:00
dma-mmp_tdma.h dma: Cleanup dma-mmp_tdma.h header 2014-01-13 13:30:30 +05:30
dma-mv_xor.h dma: mv_xor: Cleanup in dma-mv_xor.h header 2014-01-13 13:30:31 +05:30
dma-rcar-audmapp.h shdma: add R-Car Audio DMAC peri peri driver 2014-03-29 19:38:09 +05:30
dma-rcar-hpbdma.h dma: add driver for R-Car HPB-DMAC 2013-09-02 17:35:55 +05:30
dma-s3c24xx.h ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442 2013-10-21 05:32:48 +09:00
dma-ste-dma40.h dmaengine: ste_dma40: Allow memcpy channels to be configured from DT 2013-06-04 11:12:11 +02:00
dmtimer-omap.h ARM: OMAP: Add platform data header for DMTIMERs 2012-11-16 10:35:08 -06:00
dwc3-exynos.h
…
dwc3-omap.h usb: dwc3: omap: remove platform data associated with dwc3-omap 2013-03-18 11:16:38 +02:00
edma.h ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue 2014-07-28 17:03:13 +05:30
efm32-spi.h spi: new controller driver for efm32 SoCs 2013-08-09 17:32:57 +01:00
efm32-uart.h
…
ehci-sh.h
…
elm.h mtd: nand: omap: add support for BCH16_ECC - ELM driver updates 2014-05-20 17:52:14 -07:00
emif_plat.h memory: emif: Handle devices which are not rated for >85C 2013-03-25 13:18:12 -07:00
eth-netx.h net: Cleanup in eth-netx.h 2014-01-02 03:30:35 -05:00
fsa9480.h
…
g762.h Add support for GMT G762/G763 PWM fan controllers 2013-06-27 10:31:42 -07:00
gpio-davinci.h gpio: remove obsolete tnetv107x driver 2014-03-05 10:44:44 +08:00
gpio-em.h gpio: em: Add pinctrl support 2013-07-21 17:24:41 +02:00
gpio-lpc32xx.h ARM: lpc32xx: move custom GPIO header 2013-12-03 11:26:06 +01:00
gpio-omap.h ARM: OMAP: Remove NEED_MACH_GPIO_H 2012-11-02 12:00:36 -07:00
gpio-rcar.h gpio-rcar: Add RCAR_GP_PIN macro 2013-06-04 21:03:56 +09:00
gpio-ts5500.h gpio: add TS-5500 DIO blocks support 2012-12-10 11:23:25 +01:00
gpio_backlight.h backlight: Add GPIO-based backlight driver 2013-07-16 13:01:05 +09:00
hwmon-s3c.h hwmon: (s3c) Trivial cleanup in hwmon-s3c.h 2014-01-14 21:36:52 -08:00
i2c-cbus-gpio.h i2c: i2c-cbus-gpio: introduce driver 2012-11-19 09:57:16 +01:00
i2c-davinci.h
…
i2c-imx.h
…
i2c-nuc900.h
…
i2c-s3c2410.h i2c: s3c2410: Trivial cleanup in header file 2014-03-10 17:32:28 +01:00
ina2xx.h
…
intel-mid_wdt.h watchdog: add Intel MID watchdog driver support 2014-06-10 21:48:16 +02:00
invensense_mpu6050.h Invensense MPU6050 Device Driver. 2013-02-10 17:42:43 +00:00
iommu-omap.h iommu/omap: Remove platform data da_start and da_end fields 2014-07-29 12:39:56 +02:00
ipmmu-vmsa.h iommu: Add driver for Renesas VMSA-compatible IPMMU 2014-05-26 11:18:21 +02:00
irda-pxaficp.h
…
irq-renesas-intc-irqpin.h irqchip: intc-irqpin: GPL header for platform data 2013-03-18 21:26:06 +09:00
irq-renesas-irqc.h irqchip: Renesas IRQC driver 2013-03-18 21:26:06 +09:00
keyboard-pxa930_rotary.h
…
keyboard-spear.h
…
keypad-ep93xx.h Input: keypad-ep93xx - cleanup header file 2013-12-27 17:20:21 -08:00
keypad-nomadik-ske.h
…
keypad-omap.h Input: keypad-omap - cleanup header file 2013-12-27 17:20:22 -08:00
keypad-pxa27x.h Input: pxa27x-keypad - use matrix_keymap for matrix keys 2013-06-18 22:56:51 -07:00
keypad-w90p910.h
…
keyscan-davinci.h
…
lcd-mipid.h
…
leds-kirkwood-netxbig.h leds: kirkwood: Cleanup in header files 2014-01-27 17:28:51 -08:00
leds-kirkwood-ns2.h leds: kirkwood: Cleanup in header files 2014-01-27 17:28:51 -08:00
leds-lm355x.h
…
leds-lm3642.h
…
leds-lp55xx.h leds: lp55xx: handle enable pin in driver 2013-10-25 10:13:25 -07:00
leds-omap.h ARM: OMAP: Move plat/led.h to include/linux/platform_data 2012-10-17 12:03:18 -07:00
leds-pca963x.h leds-pca9633: Rename to leds-pca963x 2013-08-26 17:22:14 -07:00
leds-s3c24xx.h leds: leds-s3c24xx: Trivial cleanup in header file 2014-02-27 09:57:11 -08:00
lm3630a_bl.h backlight: lm3630: apply chip revision 2013-11-13 12:09:15 +09:00
lm3639_bl.h backlight: add new lm3639 backlight driver 2012-10-06 03:04:53 +09:00
lp855x.h backlight: lp855x_bl: support new LP8555 device 2013-11-13 12:09:14 +09:00
lp8727.h
…
lp8755.h regulator: lp8755: new driver for LP8755 2012-12-24 16:32:34 +00:00
lv5207lp.h backlight: Add Sanyo LV5207LP backlight driver 2013-07-16 13:01:10 +09:00
macb.h net/at91_ether: add pdata flag for reverse Eth addr 2012-10-23 02:40:10 -04:00
mailbox-omap.h ARM: OMAP2+: add user and fifo info to mailbox platform data 2013-06-11 11:41:30 -05:00
max197.h hwmon: (max197) add include guard 2014-01-14 21:36:53 -08:00
max3421-hcd.h usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity 2014-05-29 11:19:30 -07:00
max6697.h hwmon: Driver for Maxim MAX6697 and compatibles 2013-02-06 09:57:56 -08:00
mfd-mcp-sa11x0.h mfd: Cleanup mfd-mcp-sa11x0.h header 2014-01-21 08:28:59 +00:00
microread.h NFC: Initial support for Inside Secure microread 2013-02-03 20:37:42 +01:00
mmc-davinci.h ARM: davinci: mmc: derive version information from device name 2013-04-03 09:42:16 +05:30
mmc-esdhc-imx.h mmc: sdhci-esdhc-imx: add delay line setting support 2013-10-21 15:58:13 -04:00
mmc-msm_sdcc.h mmc: msm: Cleanup mmc-msm_sdcc.h header 2014-02-25 15:43:15 -05:00
mmc-mvsdio.h mmc: mvsdio: Cleanup mmc-mvsdio.h header 2014-02-25 15:43:23 -05:00
mmc-mxcmmc.h
…
mmc-omap.h mmc: omap_hsmmc: Enable SDIO interrupt 2014-07-09 11:26:03 +02:00
mmc-pxamci.h ARM: pxa: propagate errors from regulator_enable() to pxamci 2013-07-23 12:15:15 -07:00
mmc-s3cmci.h
…
mmc-sdhci-s3c.h mmc: sdhci-s3c: remove platform dependencies 2013-04-19 13:51:23 +02:00
mmp_audio.h
…
mmp_dma.h
…
mouse-pxa930_trkball.h
…
msm_serial_hs.h
…
mtd-davinci-aemif.h ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif 2014-02-23 20:33:18 +05:30
mtd-davinci.h
…
mtd-mxc_nand.h
…
mtd-nand-omap2.h mtd: nand: omap: Revert to using software ECC by default 2014-08-25 16:15:32 -07:00
mtd-nand-pxa3xx.h mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding 2014-05-21 12:55:09 -07:00
mtd-nand-s3c2410.h mtd: nand: s3c2410: Trivial cleanup in header file 2014-03-10 22:42:26 -07:00
mtd-onenand-omap2.h mtd: omap2: Cleanup header files 2014-01-11 11:39:18 -08:00
mtd-orion_nand.h mtd: orion: Cleanup mtd-orion_nand.h header 2014-01-11 11:39:23 -08:00
mv_usb.h usb: mv_usb: remove clock name from pdata 2013-04-02 11:42:47 +03:00
net-cw1200.h cw1200: rename the cw1200 platform definition header 2013-06-03 15:54:56 -04:00
ntc_thermistor.h hwmon: (ntc_thermistor) Support B57330V2103 from EPCOS 2014-08-04 07:01:35 -07:00
omap-twl4030.h ASoC: omap-twl4030: Update the header file to support more boards 2012-12-07 12:54:31 +09:00
omap-wd-timer.h ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer 2012-10-29 20:49:44 -06:00
omap1_bl.h
…
omap_drm.h staging: drm/omap: add support for ARCH_MULTIPLATFORM 2012-10-30 11:10:00 -07:00
pca953x.h gpio: (gpio-pca953x) move header to linux/platform_data/ 2013-08-29 12:33:52 -07:00
pcmcia-pxa2xx_viper.h
…
pinctrl-adi2.h pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x. 2013-09-19 14:37:27 +02:00
pinctrl-single.h pinctrl: single: Add support for auxdata 2013-10-10 15:30:47 -07:00
pn544.h nfc: Fix FSF address in file headers 2013-12-11 10:56:21 -05:00
pxa2xx_udc.h ARM: move udc_pxa2xx.h to linux/platform_data 2012-11-16 11:35:30 +00:00
pxa_sdhci.h mmc: sdhci-pxav3: add quirks2 2012-12-06 13:54:51 -05:00
rcar-du.h drm/rcar-du: Rework output routing support 2013-08-09 23:17:52 +02:00
remoteproc-omap.h remoteproc/omap: fix a sparse warning 2013-07-01 15:30:51 +03:00
s3c-hsotg.h ARM defconfigs: add missing inclusions of linux/platform_device.h 2013-02-14 15:14:32 -08:00
s3c-hsudc.h
…
sa11x0-serial.h ARM: move serial_sa1100.h header file to linux/platform_data 2012-11-16 11:35:29 +00:00
samsung-usbphy.h usb: phy: samsung: Introducing usb phy driver for hsotg 2013-01-18 15:06:30 +02:00
sc18is602.h
…
serial-imx.h serial: imx: Remove init() and exit() platform callbacks 2014-02-28 16:36:45 -08:00
serial-omap.h SERIAL: OMAP: Remove the slave idle handling from the driver 2013-05-19 16:37:08 -06:00
serial-sccnxp.h Revert "serial: sccnxp: Add DT support" 2013-08-02 15:25:19 +08:00
sh_ipmmu.h iommu/shmobile: Add iommu driver for Renesas IPMMU modules 2013-02-06 10:57:25 +01:00
shmob_drm.h
…
sht15.h hwmon: (sht15) add include guard 2014-01-14 21:36:53 -08:00
shtc1.h hwmon: add support for Sensirion SHTC1 sensor 2014-06-12 08:36:48 -07:00
si5351.h clk: si5351: remove variant from platform_data 2014-01-27 11:20:22 -08:00
simplefb.h fbdev changes for 3.12: 2013-09-05 09:49:32 -07:00
spi-clps711x.h spi/clps711x: New SPI master driver 2012-12-05 23:14:38 +00:00
spi-davinci.h ARM: davinci: move private EDMA API to arm/common 2013-06-18 10:52:03 +05:30
spi-ep93xx.h
…
spi-imx.h
…
spi-nuc900.h spi: nuc900: Cleanup spi-nuc900.h header 2013-12-30 12:46:20 +00:00
spi-omap2-mcspi.h spi: spi-omap2-mcspi.c: Toggle CS after each word 2013-01-26 17:00:04 +08:00
spi-s3c64xx.h spi/s3c64xx: Trivial cleanup in header file 2014-02-16 09:59:13 +08:00
ssm2518.h ASoC: Add ssm2518 support 2013-05-25 10:33:30 -04:00
st21nfca.h NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip 2014-04-22 00:37:25 +02:00
st21nfcb.h NFC: st21nfcb: few code clean up 2014-07-23 00:49:37 +02:00
st1232_pdata.h Input: st1232 - add reset pin handling 2013-04-15 10:00:44 -07:00
st_sensors_pdata.h iio: Added ST-sensors platform data to select the DRDY interrupt pin 2013-08-03 18:40:28 +01:00
syscon.h mfd: syscon: Add platform data with a regmap config name 2014-05-15 17:02:19 +01:00
tegra_emc.h
…
touchscreen-s3c2410.h Input: s3c2410 - trivial cleanup in header file 2014-02-14 00:09:43 -08:00
tsl2563.h iio:light:tsl2563 move out of staging 2013-01-27 17:37:24 +00:00
uio_dmem_genirq.h Add new uio device for dynamic memory allocation 2012-10-24 15:39:08 -07:00
uio_pruss.h uio: uio_pruss: replace private SRAM API with genalloc 2012-10-27 16:28:32 +05:30
usb-davinci.h
…
usb-ehci-mxc.h ARM: imx: move EHCI platform defines out of platform_data header 2014-07-18 16:10:04 +08:00
usb-ehci-orion.h usb: ehci: Cleanup usb-ehci-orion.h header 2014-01-03 12:37:57 -08:00
usb-musb-ux500.h usb: musb: ux500: move channel number knowledge into the driver 2013-06-04 11:12:02 +02:00
usb-mx2.h
…
usb-ohci-pxa27x.h
…
usb-ohci-s3c2410.h
…
usb-omap.h mfd: omap-usb-host: override number of ports from platform data 2013-02-13 13:22:49 +02:00
usb-omap1.h usb: omap1: add extcon to platform data 2013-12-06 14:36:37 -06:00
usb-pxa3xx-ulpi.h
…
usb-rcar-gen2-phy.h usb: phy: Add RCAR Gen2 USB phy 2013-10-10 11:59:48 -05:00
usb-rcar-phy.h phy-rcar-usb: add R8A7778 support 2013-06-11 16:11:16 +09:00
usb-s3c2410_udc.h
…
usb3503.h usb: misc: usb3503: Add to select the ports to disable 2013-05-30 21:32:52 +09:00
ux500_wdt.h watchdog: Add support for ux500_wdt watchdog 2013-02-14 00:22:53 +01:00
video-clcd-versatile.h video: fix up versatile CLCD helper move 2014-07-23 17:41:00 +02:00
video-ep93xx.h video: ep93xx: Cleanup video-ep93xx.h header 2014-01-17 10:57:41 +02:00
video-imxfb.h video: imxfb: Remove unused fields from platform data structure 2014-02-28 12:35:22 +02:00
video-msm_fb.h video: msm: Cleanup video-msm_fb.h header 2014-01-17 10:57:42 +02:00
video-mx3fb.h
…
video-nuc900fb.h
…
video-pxafb.h video: pxa: Cleanup video-pxafb.h header 2014-01-17 10:57:42 +02:00
video_s3c.h video/s3c: move platform_data out of arch/arm 2013-04-11 14:49:20 +03:00
voltage-omap.h
…
vsp1.h [media] v4l: vsp1: Add LUT support 2013-12-11 09:25:20 -02:00
wiznet.h
…
zforce_ts.h Input: add driver for Neonode zForce based touchscreens 2013-10-31 08:46:08 -07:00