![Fabio Estevam](/assets/img/avatar_default.png)
On imx6sl-evk board the VGEN1 regulator powers up the NVCC_1P2V domain of the imx6sl SoC, so we need to keep it always powered. According to imx6sl datasheet the GPIO block has three supplies: NVCC33_IO, NVCC18_IO and NVCC_1P2V and it states that: "All digital I/O supplies (NVCC_xxxx) must be powered under normal conditions whether the associated I/O pins are in use or not" This problem has been observed by the fact that a GPIO connected to an LED could not work when the PMIC driver was enabled. Keeping VGEN1 regulator always enabled fixes the problem. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
531 lines
13 KiB
Plaintext
531 lines
13 KiB
Plaintext
/*
|
|
* Copyright (C) 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "imx6sl.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX6 SoloLite EVK Board";
|
|
compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
|
|
|
|
memory {
|
|
reg = <0x80000000 0x40000000>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_led>;
|
|
|
|
user {
|
|
label = "debug";
|
|
gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
reg_usb_otg1_vbus: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "usb_otg1_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio4 0 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usb_otg2_vbus: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "usb_otg2_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio4 2 0>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_aud3v: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
regulator-name = "wm8962-supply-3v15";
|
|
regulator-min-microvolt = <3150000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
reg_aud4v: regulator@3 {
|
|
compatible = "regulator-fixed";
|
|
reg = <3>;
|
|
regulator-name = "wm8962-supply-4v2";
|
|
regulator-min-microvolt = <4325000>;
|
|
regulator-max-microvolt = <4325000>;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
|
|
model = "wm8962-audio";
|
|
ssi-controller = <&ssi2>;
|
|
audio-codec = <&codec>;
|
|
audio-routing =
|
|
"Headphone Jack", "HPOUTL",
|
|
"Headphone Jack", "HPOUTR",
|
|
"Ext Spk", "SPKOUTL",
|
|
"Ext Spk", "SPKOUTR",
|
|
"AMIC", "MICBIAS",
|
|
"IN3R", "AMIC";
|
|
mux-int-port = <2>;
|
|
mux-ext-port = <3>;
|
|
};
|
|
};
|
|
|
|
&audmux {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_audmux3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ecspi1 {
|
|
fsl,spi-num-chipselects = <1>;
|
|
cs-gpios = <&gpio4 11 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
status = "okay";
|
|
|
|
flash: m25p80@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "st,m25p32";
|
|
spi-max-frequency = <20000000>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec>;
|
|
phy-mode = "rmii";
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pmic: pfuze100@08 {
|
|
compatible = "fsl,pfuze100";
|
|
reg = <0x08>;
|
|
|
|
regulators {
|
|
sw1a_reg: sw1ab {
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw1c_reg: sw1c {
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1875000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <6250>;
|
|
};
|
|
|
|
sw2_reg: sw2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3a_reg: sw3a {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw3b_reg: sw3b {
|
|
regulator-min-microvolt = <400000>;
|
|
regulator-max-microvolt = <1975000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sw4_reg: sw4 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
swbst_reg: swbst {
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5150000>;
|
|
};
|
|
|
|
snvs_reg: vsnvs {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vref_reg: vrefddr {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen1_reg: vgen1 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen2_reg: vgen2 {
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1550000>;
|
|
};
|
|
|
|
vgen3_reg: vgen3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vgen4_reg: vgen4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen5_reg: vgen5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vgen6_reg: vgen6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
codec: wm8962@1a {
|
|
compatible = "wlf,wm8962";
|
|
reg = <0x1a>;
|
|
clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
|
|
DCVDD-supply = <&vgen3_reg>;
|
|
DBVDD-supply = <®_aud3v>;
|
|
AVDD-supply = <&vgen3_reg>;
|
|
CPVDD-supply = <&vgen3_reg>;
|
|
MICVDD-supply = <®_aud3v>;
|
|
PLLVDD-supply = <&vgen3_reg>;
|
|
SPKVDD1-supply = <®_aud4v>;
|
|
SPKVDD2-supply = <®_aud4v>;
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
imx6sl-evk {
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
|
|
MX6SL_PAD_KEY_COL7__GPIO4_IO06 0x17059
|
|
MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x17059
|
|
MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x17059
|
|
MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
|
|
MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x80000000
|
|
MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x80000000
|
|
MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_audmux3: audmux3grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_AUD_RXD__AUD3_RXD 0x4130b0
|
|
MX6SL_PAD_AUD_TXC__AUD3_TXC 0x4130b0
|
|
MX6SL_PAD_AUD_TXD__AUD3_TXD 0x4110b0
|
|
MX6SL_PAD_AUD_TXFS__AUD3_TXFS 0x4130b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1
|
|
MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1
|
|
MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec: fecgrp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_FEC_MDC__FEC_MDC 0x1b0b0
|
|
MX6SL_PAD_FEC_MDIO__FEC_MDIO 0x1b0b0
|
|
MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV 0x1b0b0
|
|
MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0 0x1b0b0
|
|
MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1 0x1b0b0
|
|
MX6SL_PAD_FEC_TX_EN__FEC_TX_EN 0x1b0b0
|
|
MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0 0x1b0b0
|
|
MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1 0x1b0b0
|
|
MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
|
|
MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001b8b1
|
|
MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_led: ledgrp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_kpp: kppgrp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_KEY_ROW0__KEY_ROW0 0x1b010
|
|
MX6SL_PAD_KEY_ROW1__KEY_ROW1 0x1b010
|
|
MX6SL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b0
|
|
MX6SL_PAD_KEY_COL0__KEY_COL0 0x110b0
|
|
MX6SL_PAD_KEY_COL1__KEY_COL1 0x110b0
|
|
MX6SL_PAD_KEY_COL2__KEY_COL2 0x110b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
|
|
MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usbotg1: usbotg1grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059
|
|
MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059
|
|
MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059
|
|
MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059
|
|
MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059
|
|
MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059
|
|
MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059
|
|
MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059
|
|
MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059
|
|
MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
|
|
MX6SL_PAD_SD1_CLK__SD1_CLK 0x100b9
|
|
MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
|
|
MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
|
|
MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
|
|
MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
|
|
MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
|
|
MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
|
|
MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
|
|
MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
|
|
MX6SL_PAD_SD1_CLK__SD1_CLK 0x100f9
|
|
MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
|
|
MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
|
|
MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
|
|
MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
|
|
MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170f9
|
|
MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170f9
|
|
MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170f9
|
|
MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170f9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059
|
|
MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059
|
|
MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059
|
|
MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059
|
|
MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059
|
|
MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9
|
|
MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9
|
|
MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
|
|
MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
|
|
MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
|
|
MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9
|
|
MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9
|
|
MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
|
|
MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
|
|
MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
|
|
MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
MX6SL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
|
|
MX6SL_PAD_SD3_CLK__SD3_CLK 0x100b9
|
|
MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
|
|
MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
|
|
MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
|
|
MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
|
|
fsl,pins = <
|
|
MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
|
|
MX6SL_PAD_SD3_CLK__SD3_CLK 0x100f9
|
|
MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
|
|
MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
|
|
MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
|
|
MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&kpp {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_kpp>;
|
|
linux,keymap = <
|
|
MATRIX_KEY(0x0, 0x0, KEY_UP) /* ROW0, COL0 */
|
|
MATRIX_KEY(0x0, 0x1, KEY_DOWN) /* ROW0, COL1 */
|
|
MATRIX_KEY(0x0, 0x2, KEY_ENTER) /* ROW0, COL2 */
|
|
MATRIX_KEY(0x1, 0x0, KEY_HOME) /* ROW1, COL0 */
|
|
MATRIX_KEY(0x1, 0x1, KEY_RIGHT) /* ROW1, COL1 */
|
|
MATRIX_KEY(0x1, 0x2, KEY_LEFT) /* ROW1, COL2 */
|
|
MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
|
|
MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP) /* ROW2, COL1 */
|
|
>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ssi2 {
|
|
fsl,mode = "i2s-slave";
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
vbus-supply = <®_usb_otg1_vbus>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg1>;
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg2 {
|
|
vbus-supply = <®_usb_otg2_vbus>;
|
|
dr_mode = "host";
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
|
bus-width = <8>;
|
|
cd-gpios = <&gpio4 7 0>;
|
|
wp-gpios = <&gpio4 6 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc2 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
|
|
cd-gpios = <&gpio5 0 0>;
|
|
wp-gpios = <&gpio4 29 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
cd-gpios = <&gpio3 22 0>;
|
|
status = "okay";
|
|
};
|