![Matt Ranostay](/assets/img/avatar_default.png)
Previous offset wasn't applied in the correct order and invalid. This patchset fixes this issue, and also has the correct scale value applied to the offset. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
321 lines
7.6 KiB
C
321 lines
7.6 KiB
C
/*
|
|
* hdc100x.c - Support for the TI HDC100x temperature + humidity sensors
|
|
*
|
|
* Copyright (C) 2015 Matt Ranostay <mranostay@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#define HDC100X_REG_TEMP 0x00
|
|
#define HDC100X_REG_HUMIDITY 0x01
|
|
|
|
#define HDC100X_REG_CONFIG 0x02
|
|
#define HDC100X_REG_CONFIG_HEATER_EN BIT(13)
|
|
|
|
struct hdc100x_data {
|
|
struct i2c_client *client;
|
|
struct mutex lock;
|
|
u16 config;
|
|
|
|
/* integration time of the sensor */
|
|
int adc_int_us[2];
|
|
};
|
|
|
|
/* integration time in us */
|
|
static const int hdc100x_int_time[][3] = {
|
|
{ 6350, 3650, 0 }, /* IIO_TEMP channel*/
|
|
{ 6500, 3850, 2500 }, /* IIO_HUMIDITYRELATIVE channel */
|
|
};
|
|
|
|
/* HDC100X_REG_CONFIG shift and mask values */
|
|
static const struct {
|
|
int shift;
|
|
int mask;
|
|
} hdc100x_resolution_shift[2] = {
|
|
{ /* IIO_TEMP channel */
|
|
.shift = 10,
|
|
.mask = 1
|
|
},
|
|
{ /* IIO_HUMIDITYRELATIVE channel */
|
|
.shift = 8,
|
|
.mask = 2,
|
|
},
|
|
};
|
|
|
|
static IIO_CONST_ATTR(temp_integration_time_available,
|
|
"0.00365 0.00635");
|
|
|
|
static IIO_CONST_ATTR(humidityrelative_integration_time_available,
|
|
"0.0025 0.00385 0.0065");
|
|
|
|
static IIO_CONST_ATTR(out_current_heater_raw_available,
|
|
"0 1");
|
|
|
|
static struct attribute *hdc100x_attributes[] = {
|
|
&iio_const_attr_temp_integration_time_available.dev_attr.attr,
|
|
&iio_const_attr_humidityrelative_integration_time_available.dev_attr.attr,
|
|
&iio_const_attr_out_current_heater_raw_available.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static struct attribute_group hdc100x_attribute_group = {
|
|
.attrs = hdc100x_attributes,
|
|
};
|
|
|
|
static const struct iio_chan_spec hdc100x_channels[] = {
|
|
{
|
|
.type = IIO_TEMP,
|
|
.address = HDC100X_REG_TEMP,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_INT_TIME) |
|
|
BIT(IIO_CHAN_INFO_OFFSET),
|
|
},
|
|
{
|
|
.type = IIO_HUMIDITYRELATIVE,
|
|
.address = HDC100X_REG_HUMIDITY,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_INT_TIME)
|
|
},
|
|
{
|
|
.type = IIO_CURRENT,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.extend_name = "heater",
|
|
.output = 1,
|
|
},
|
|
};
|
|
|
|
static int hdc100x_update_config(struct hdc100x_data *data, int mask, int val)
|
|
{
|
|
int tmp = (~mask & data->config) | val;
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_word_swapped(data->client,
|
|
HDC100X_REG_CONFIG, tmp);
|
|
if (!ret)
|
|
data->config = tmp;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int hdc100x_set_it_time(struct hdc100x_data *data, int chan, int val2)
|
|
{
|
|
int shift = hdc100x_resolution_shift[chan].shift;
|
|
int ret = -EINVAL;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(hdc100x_int_time[chan]); i++) {
|
|
if (val2 && val2 == hdc100x_int_time[chan][i]) {
|
|
ret = hdc100x_update_config(data,
|
|
hdc100x_resolution_shift[chan].mask << shift,
|
|
i << shift);
|
|
if (!ret)
|
|
data->adc_int_us[chan] = val2;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int hdc100x_get_measurement(struct hdc100x_data *data,
|
|
struct iio_chan_spec const *chan)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int delay = data->adc_int_us[chan->address];
|
|
int ret;
|
|
int val;
|
|
|
|
/* start measurement */
|
|
ret = i2c_smbus_write_byte(client, chan->address);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "cannot start measurement");
|
|
return ret;
|
|
}
|
|
|
|
/* wait for integration time to pass */
|
|
usleep_range(delay, delay + 1000);
|
|
|
|
/*
|
|
* i2c_smbus_read_word_data cannot() be used here due to the command
|
|
* value not being understood and causes NAKs preventing any reading
|
|
* from being accessed.
|
|
*/
|
|
ret = i2c_smbus_read_byte(client);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "cannot read high byte measurement");
|
|
return ret;
|
|
}
|
|
val = ret << 6;
|
|
|
|
ret = i2c_smbus_read_byte(client);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "cannot read low byte measurement");
|
|
return ret;
|
|
}
|
|
val |= ret >> 2;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int hdc100x_get_heater_status(struct hdc100x_data *data)
|
|
{
|
|
return !!(data->config & HDC100X_REG_CONFIG_HEATER_EN);
|
|
}
|
|
|
|
static int hdc100x_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
struct hdc100x_data *data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW: {
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
if (chan->type == IIO_CURRENT) {
|
|
*val = hdc100x_get_heater_status(data);
|
|
ret = IIO_VAL_INT;
|
|
} else {
|
|
ret = hdc100x_get_measurement(data, chan);
|
|
if (ret >= 0) {
|
|
*val = ret;
|
|
ret = IIO_VAL_INT;
|
|
}
|
|
}
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
*val = 0;
|
|
*val2 = data->adc_int_us[chan->address];
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
if (chan->type == IIO_TEMP) {
|
|
*val = 165;
|
|
*val2 = 65536 >> 2;
|
|
return IIO_VAL_FRACTIONAL;
|
|
} else {
|
|
*val = 0;
|
|
*val2 = 10000;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
break;
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
*val = -3971;
|
|
*val2 = 879096;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int hdc100x_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct hdc100x_data *data = iio_priv(indio_dev);
|
|
int ret = -EINVAL;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
if (val != 0)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = hdc100x_set_it_time(data, chan->address, val2);
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
case IIO_CHAN_INFO_RAW:
|
|
if (chan->type != IIO_CURRENT || val2 != 0)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = hdc100x_update_config(data, HDC100X_REG_CONFIG_HEATER_EN,
|
|
val ? HDC100X_REG_CONFIG_HEATER_EN : 0);
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_info hdc100x_info = {
|
|
.read_raw = hdc100x_read_raw,
|
|
.write_raw = hdc100x_write_raw,
|
|
.attrs = &hdc100x_attribute_group,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static int hdc100x_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct hdc100x_data *data;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
|
|
return -ENODEV;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
mutex_init(&data->lock);
|
|
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->name = dev_name(&client->dev);
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &hdc100x_info;
|
|
|
|
indio_dev->channels = hdc100x_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(hdc100x_channels);
|
|
|
|
/* be sure we are in a known state */
|
|
hdc100x_set_it_time(data, 0, hdc100x_int_time[0][0]);
|
|
hdc100x_set_it_time(data, 1, hdc100x_int_time[1][0]);
|
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id hdc100x_id[] = {
|
|
{ "hdc100x", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, hdc100x_id);
|
|
|
|
static struct i2c_driver hdc100x_driver = {
|
|
.driver = {
|
|
.name = "hdc100x",
|
|
},
|
|
.probe = hdc100x_probe,
|
|
.id_table = hdc100x_id,
|
|
};
|
|
module_i2c_driver(hdc100x_driver);
|
|
|
|
MODULE_AUTHOR("Matt Ranostay <mranostay@gmail.com>");
|
|
MODULE_DESCRIPTION("TI HDC100x humidity and temperature sensor driver");
|
|
MODULE_LICENSE("GPL");
|