redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/x86/kernel/head_64.S
Maran Wilson 7733607fb3 xen/pvh: Split CONFIG_XEN_PVH into CONFIG_PVH and CONFIG_XEN_PVH 
In order to pave the way for hypervisors other than Xen to use the PVH
entry point for VMs, we need to factor the PVH entry code into Xen specific
and hypervisor agnostic components. The first step in doing that, is to
create a new config option for PVH entry that can be enabled
independently from CONFIG_XEN.

Signed-off-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-12-13 13:41:49 -05:00

486 lines
13 KiB
ArmAsm
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* linux/arch/x86/kernel/head_64.S -- start in 32bit and switch to 64bit
*
* Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
* Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
* Copyright (C) 2000 Karsten Keil <kkeil@suse.de>
* Copyright (C) 2001,2002 Andi Kleen <ak@suse.de>
* Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com>
*/
#include <linux/linkage.h>
#include <linux/threads.h>
#include <linux/init.h>
#include <asm/segment.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/msr.h>
#include <asm/cache.h>
#include <asm/processor-flags.h>
#include <asm/percpu.h>
#include <asm/nops.h>
#include "../entry/calling.h"
#include <asm/export.h>
#include <asm/nospec-branch.h>
#include <asm/fixmap.h>
#ifdef CONFIG_PARAVIRT_XXL
#include <asm/asm-offsets.h>
#include <asm/paravirt.h>
#define GET_CR2_INTO(reg) GET_CR2_INTO_RAX ; movq %rax, reg
#else
#define GET_CR2_INTO(reg) movq %cr2, reg
#define INTERRUPT_RETURN iretq
#endif
/* we are not able to switch in one step to the final KERNEL ADDRESS SPACE
* because we need identity-mapped pages.
*
*/
#define l4_index(x) (((x) >> 39) & 511)
#define pud_index(x) (((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
L4_PAGE_OFFSET = l4_index(__PAGE_OFFSET_BASE_L4)
L4_START_KERNEL = l4_index(__START_KERNEL_map)
L3_START_KERNEL = pud_index(__START_KERNEL_map)
.text
__HEAD
.code64
.globl startup_64
startup_64:
UNWIND_HINT_EMPTY
/*
* At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
* and someone has loaded an identity mapped page table
* for us. These identity mapped page tables map all of the
* kernel pages and possibly all of memory.
*
* %rsi holds a physical pointer to real_mode_data.
*
* We come here either directly from a 64bit bootloader, or from
* arch/x86/boot/compressed/head_64.S.
*
* We only come here initially at boot nothing else comes here.
*
* Since we may be loaded at an address different from what we were
* compiled to run at we first fixup the physical addresses in our page
* tables and then reload them.
*/
/* Set up the stack for verify_cpu(), similar to initial_stack below */
leaq (__end_init_task - SIZEOF_PTREGS)(%rip), %rsp
/* Sanitize CPU configuration */
call verify_cpu
/*
* Perform pagetable fixups. Additionally, if SME is active, encrypt
* the kernel and retrieve the modifier (SME encryption mask if SME
* is active) to be added to the initial pgdir entry that will be
* programmed into CR3.
*/
leaq _text(%rip), %rdi
pushq %rsi
call __startup_64
popq %rsi
/* Form the CR3 value being sure to include the CR3 modifier */
addq $(early_top_pgt - __START_KERNEL_map), %rax
jmp 1f
ENTRY(secondary_startup_64)
UNWIND_HINT_EMPTY
/*
* At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0,
* and someone has loaded a mapped page table.
*
* %rsi holds a physical pointer to real_mode_data.
*
* We come here either from startup_64 (using physical addresses)
* or from trampoline.S (using virtual addresses).
*
* Using virtual addresses from trampoline.S removes the need
* to have any identity mapped pages in the kernel page table
* after the boot processor executes this code.
*/
/* Sanitize CPU configuration */
call verify_cpu
/*
* Retrieve the modifier (SME encryption mask if SME is active) to be
* added to the initial pgdir entry that will be programmed into CR3.
*/
pushq %rsi
call __startup_secondary_64
popq %rsi
/* Form the CR3 value being sure to include the CR3 modifier */
addq $(init_top_pgt - __START_KERNEL_map), %rax
1:
/* Enable PAE mode, PGE and LA57 */
movl $(X86_CR4_PAE | X86_CR4_PGE), %ecx
#ifdef CONFIG_X86_5LEVEL
testl $1, __pgtable_l5_enabled(%rip)
jz 1f
orl $X86_CR4_LA57, %ecx
1:
#endif
movq %rcx, %cr4
/* Setup early boot stage 4-/5-level pagetables. */
addq phys_base(%rip), %rax
movq %rax, %cr3
/* Ensure I am executing from virtual addresses */
movq $1f, %rax
ANNOTATE_RETPOLINE_SAFE
jmp *%rax
1:
UNWIND_HINT_EMPTY
/* Check if nx is implemented */
movl $0x80000001, %eax
cpuid
movl %edx,%edi
/* Setup EFER (Extended Feature Enable Register) */
movl $MSR_EFER, %ecx
rdmsr
btsl $_EFER_SCE, %eax /* Enable System Call */
btl $20,%edi /* No Execute supported? */
jnc 1f
btsl $_EFER_NX, %eax
btsq $_PAGE_BIT_NX,early_pmd_flags(%rip)
1: wrmsr /* Make changes effective */
/* Setup cr0 */
movl $CR0_STATE, %eax
/* Make changes effective */
movq %rax, %cr0
/* Setup a boot time stack */
movq initial_stack(%rip), %rsp
/* zero EFLAGS after setting rsp */
pushq $0
popfq
/*
* We must switch to a new descriptor in kernel space for the GDT
* because soon the kernel won't have access anymore to the userspace
* addresses where we're currently running on. We have to do that here
* because in 32bit we couldn't load a 64bit linear address.
*/
lgdt early_gdt_descr(%rip)
/* set up data segments */
xorl %eax,%eax
movl %eax,%ds
movl %eax,%ss
movl %eax,%es
/*
* We don't really need to load %fs or %gs, but load them anyway
* to kill any stale realmode selectors. This allows execution
* under VT hardware.
*/
movl %eax,%fs
movl %eax,%gs
/* Set up %gs.
*
* The base of %gs always points to the bottom of the irqstack
* union. If the stack protector canary is enabled, it is
* located at %gs:40. Note that, on SMP, the boot cpu uses
* init data section till per cpu areas are set up.
*/
movl $MSR_GS_BASE,%ecx
movl initial_gs(%rip),%eax
movl initial_gs+4(%rip),%edx
wrmsr
/* rsi is pointer to real mode structure with interesting info.
pass it to C */
movq %rsi, %rdi
.Ljump_to_C_code:
/*
* Jump to run C code and to be on a real kernel address.
* Since we are running on identity-mapped space we have to jump
* to the full 64bit address, this is only possible as indirect
* jump. In addition we need to ensure %cs is set so we make this
* a far return.
*
* Note: do not change to far jump indirect with 64bit offset.
*
* AMD does not support far jump indirect with 64bit offset.
* AMD64 Architecture Programmer's Manual, Volume 3: states only
* JMP FAR mem16:16 FF /5 Far jump indirect,
* with the target specified by a far pointer in memory.
* JMP FAR mem16:32 FF /5 Far jump indirect,
* with the target specified by a far pointer in memory.
*
* Intel64 does support 64bit offset.
* Software Developer Manual Vol 2: states:
* FF /5 JMP m16:16 Jump far, absolute indirect,
* address given in m16:16
* FF /5 JMP m16:32 Jump far, absolute indirect,
* address given in m16:32.
* REX.W + FF /5 JMP m16:64 Jump far, absolute indirect,
* address given in m16:64.
*/
pushq $.Lafter_lret # put return address on stack for unwinder
xorl %ebp, %ebp # clear frame pointer
movq initial_code(%rip), %rax
pushq $__KERNEL_CS # set correct cs
pushq %rax # target address in negative space
lretq
.Lafter_lret:
END(secondary_startup_64)
#include "verify_cpu.S"
#ifdef CONFIG_HOTPLUG_CPU
/*
* Boot CPU0 entry point. It's called from play_dead(). Everything has been set
* up already except stack. We just set up stack here. Then call
* start_secondary() via .Ljump_to_C_code.
*/
ENTRY(start_cpu0)
movq initial_stack(%rip), %rsp
UNWIND_HINT_EMPTY
jmp .Ljump_to_C_code
ENDPROC(start_cpu0)
#endif
/* Both SMP bootup and ACPI suspend change these variables */
__REFDATA
.balign 8
GLOBAL(initial_code)
.quad x86_64_start_kernel
GLOBAL(initial_gs)
.quad INIT_PER_CPU_VAR(irq_stack_union)
GLOBAL(initial_stack)
/*
* The SIZEOF_PTREGS gap is a convention which helps the in-kernel
* unwinder reliably detect the end of the stack.
*/
.quad init_thread_union + THREAD_SIZE - SIZEOF_PTREGS
__FINITDATA
__INIT
ENTRY(early_idt_handler_array)
i = 0
.rept NUM_EXCEPTION_VECTORS
.if ((EXCEPTION_ERRCODE_MASK >> i) & 1) == 0
UNWIND_HINT_IRET_REGS
pushq $0 # Dummy error code, to make stack frame uniform
.else
UNWIND_HINT_IRET_REGS offset=8
.endif
pushq $i # 72(%rsp) Vector number
jmp early_idt_handler_common
UNWIND_HINT_IRET_REGS
i = i + 1
.fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
.endr
UNWIND_HINT_IRET_REGS offset=16
END(early_idt_handler_array)
early_idt_handler_common:
/*
* The stack is the hardware frame, an error code or zero, and the
* vector number.
*/
cld
incl early_recursion_flag(%rip)
/* The vector number is currently in the pt_regs->di slot. */
pushq %rsi /* pt_regs->si */
movq 8(%rsp), %rsi /* RSI = vector number */
movq %rdi, 8(%rsp) /* pt_regs->di = RDI */
pushq %rdx /* pt_regs->dx */
pushq %rcx /* pt_regs->cx */
pushq %rax /* pt_regs->ax */
pushq %r8 /* pt_regs->r8 */
pushq %r9 /* pt_regs->r9 */
pushq %r10 /* pt_regs->r10 */
pushq %r11 /* pt_regs->r11 */
pushq %rbx /* pt_regs->bx */
pushq %rbp /* pt_regs->bp */
pushq %r12 /* pt_regs->r12 */
pushq %r13 /* pt_regs->r13 */
pushq %r14 /* pt_regs->r14 */
pushq %r15 /* pt_regs->r15 */
UNWIND_HINT_REGS
cmpq $14,%rsi /* Page fault? */
jnz 10f
GET_CR2_INTO(%rdi) /* Can clobber any volatile register if pv */
call early_make_pgtable
andl %eax,%eax
jz 20f /* All good */
10:
movq %rsp,%rdi /* RDI = pt_regs; RSI is already trapnr */
call early_fixup_exception
20:
decl early_recursion_flag(%rip)
jmp restore_regs_and_return_to_kernel
END(early_idt_handler_common)
__INITDATA
.balign 4
GLOBAL(early_recursion_flag)
.long 0
#define NEXT_PAGE(name) \
.balign PAGE_SIZE; \
GLOBAL(name)
#ifdef CONFIG_PAGE_TABLE_ISOLATION
/*
* Each PGD needs to be 8k long and 8k aligned. We do not
* ever go out to userspace with these, so we do not
* strictly *need* the second page, but this allows us to
* have a single set_pgd() implementation that does not
* need to worry about whether it has 4k or 8k to work
* with.
*
* This ensures PGDs are 8k long:
*/
#define PTI_USER_PGD_FILL 512
/* This ensures they are 8k-aligned: */
#define NEXT_PGD_PAGE(name) \
.balign 2 * PAGE_SIZE; \
GLOBAL(name)
#else
#define NEXT_PGD_PAGE(name) NEXT_PAGE(name)
#define PTI_USER_PGD_FILL 0
#endif
/* Automate the creation of 1 to 1 mapping pmd entries */
#define PMDS(START, PERM, COUNT) \
i = 0 ; \
.rept (COUNT) ; \
.quad (START) + (i << PMD_SHIFT) + (PERM) ; \
i = i + 1 ; \
.endr
__INITDATA
NEXT_PGD_PAGE(early_top_pgt)
.fill 512,8,0
.fill PTI_USER_PGD_FILL,8,0
NEXT_PAGE(early_dynamic_pgts)
.fill 512*EARLY_DYNAMIC_PAGE_TABLES,8,0
.data
#if defined(CONFIG_XEN_PV) || defined(CONFIG_PVH)
NEXT_PGD_PAGE(init_top_pgt)
.quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
.org init_top_pgt + L4_PAGE_OFFSET*8, 0
.quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
.org init_top_pgt + L4_START_KERNEL*8, 0
/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
.quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
.fill PTI_USER_PGD_FILL,8,0
NEXT_PAGE(level3_ident_pgt)
.quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
.fill 511, 8, 0
NEXT_PAGE(level2_ident_pgt)
/*
* Since I easily can, map the first 1G.
* Don't set NX because code runs from these pages.
*
* Note: This sets _PAGE_GLOBAL despite whether
* the CPU supports it or it is enabled. But,
* the CPU should ignore the bit.
*/
PMDS(0, __PAGE_KERNEL_IDENT_LARGE_EXEC, PTRS_PER_PMD)
#else
NEXT_PGD_PAGE(init_top_pgt)
.fill 512,8,0
.fill PTI_USER_PGD_FILL,8,0
#endif
#ifdef CONFIG_X86_5LEVEL
NEXT_PAGE(level4_kernel_pgt)
.fill 511,8,0
.quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
#endif
NEXT_PAGE(level3_kernel_pgt)
.fill L3_START_KERNEL,8,0
/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
.quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC
.quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC
NEXT_PAGE(level2_kernel_pgt)
/*
* 512 MB kernel mapping. We spend a full page on this pagetable
* anyway.
*
* The kernel code+data+bss must not be bigger than that.
*
* (NOTE: at +512MB starts the module area, see MODULES_VADDR.
* If you want to increase this then increase MODULES_VADDR
* too.)
*
* This table is eventually used by the kernel during normal
* runtime. Care must be taken to clear out undesired bits
* later, like _PAGE_RW or _PAGE_GLOBAL in some cases.
*/
PMDS(0, __PAGE_KERNEL_LARGE_EXEC,
KERNEL_IMAGE_SIZE/PMD_SIZE)
NEXT_PAGE(level2_fixmap_pgt)
.fill (512 - 4 - FIXMAP_PMD_NUM),8,0
pgtno = 0
.rept (FIXMAP_PMD_NUM)
.quad level1_fixmap_pgt + (pgtno << PAGE_SHIFT) - __START_KERNEL_map \
+ _PAGE_TABLE_NOENC;
pgtno = pgtno + 1
.endr
/* 6 MB reserved space + a 2MB hole */
.fill 4,8,0
NEXT_PAGE(level1_fixmap_pgt)
.rept (FIXMAP_PMD_NUM)
.fill 512,8,0
.endr
#undef PMDS
.data
.align 16
.globl early_gdt_descr
early_gdt_descr:
.word GDT_ENTRIES*8-1
early_gdt_descr_base:
.quad INIT_PER_CPU_VAR(gdt_page)
ENTRY(phys_base)
/* This must match the first entry in level2_kernel_pgt */
.quad 0x0000000000000000
EXPORT_SYMBOL(phys_base)
#include "../../x86/xen/xen-head.S"
__PAGE_ALIGNED_BSS
NEXT_PAGE(empty_zero_page)
.skip PAGE_SIZE
EXPORT_SYMBOL(empty_zero_page)
View git blame Copy permalink