redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/regulator/arizona-ldo1.c
Charles Keepax a9191579ba
regulator: arizona-ldo1: Use correct device to get enable GPIO 
Currently the enable GPIO is being looked up on the regulator
device itself but that does not have its own DT node, this causes
the lookup to fail and the regulator not to get its GPIO. The DT
node is shared across the whole MFD and as such the lookup needs
to happen on that parent device. Moving the lookup to the parent
device also means devres can no longer be used as the life time
would attach to the wrong device.

Additionally, the enable GPIO is active high so we should be passing
GPIOD_OUT_LOW to ensure the regulator starts in its off state allowing
the driver to enable it when it is ready.

Fixes: e1739e86f0 ("regulator: arizona-ldo1: Look up a descriptor and pass to the core")
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-19 16:12:01 +01:00

372 lines
8.9 KiB
C
Raw Blame History

/*
* arizona-ldo1.c -- LDO1 supply for Arizona devices
*
* Copyright 2012 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/slab.h>
#include <linux/regulator/arizona-ldo1.h>
#include <linux/mfd/arizona/core.h>
#include <linux/mfd/arizona/pdata.h>
#include <linux/mfd/arizona/registers.h>
struct arizona_ldo1 {
struct regulator_dev *regulator;
struct regmap *regmap;
struct regulator_consumer_supply supply;
struct regulator_init_data init_data;
struct gpio_desc *ena_gpiod;
};
static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
if (selector >= rdev->desc->n_voltages)
return -EINVAL;
if (selector == rdev->desc->n_voltages - 1)
return 1800000;
else
return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
}
static int arizona_ldo1_hc_map_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
int sel;
sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
if (sel >= rdev->desc->n_voltages)
sel = rdev->desc->n_voltages - 1;
return sel;
}
static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
unsigned sel)
{
struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
struct regmap *regmap = ldo->regmap;
unsigned int val;
int ret;
if (sel == rdev->desc->n_voltages - 1)
val = ARIZONA_LDO1_HI_PWR;
else
val = 0;
ret = regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_2,
ARIZONA_LDO1_HI_PWR, val);
if (ret != 0)
return ret;
if (val)
return 0;
val = sel << ARIZONA_LDO1_VSEL_SHIFT;
return regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_1,
ARIZONA_LDO1_VSEL_MASK, val);
}
static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
{
struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
struct regmap *regmap = ldo->regmap;
unsigned int val;
int ret;
ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_2, &val);
if (ret != 0)
return ret;
if (val & ARIZONA_LDO1_HI_PWR)
return rdev->desc->n_voltages - 1;
ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_1, &val);
if (ret != 0)
return ret;
return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT;
}
static const struct regulator_ops arizona_ldo1_hc_ops = {
.list_voltage = arizona_ldo1_hc_list_voltage,
.map_voltage = arizona_ldo1_hc_map_voltage,
.get_voltage_sel = arizona_ldo1_hc_get_voltage_sel,
.set_voltage_sel = arizona_ldo1_hc_set_voltage_sel,
.get_bypass = regulator_get_bypass_regmap,
.set_bypass = regulator_set_bypass_regmap,
};
static const struct regulator_desc arizona_ldo1_hc = {
.name = "LDO1",
.supply_name = "LDOVDD",
.type = REGULATOR_VOLTAGE,
.ops = &arizona_ldo1_hc_ops,
.bypass_reg = ARIZONA_LDO1_CONTROL_1,
.bypass_mask = ARIZONA_LDO1_BYPASS,
.min_uV = 900000,
.uV_step = 50000,
.n_voltages = 8,
.enable_time = 1500,
.ramp_delay = 24000,
.owner = THIS_MODULE,
};
static const struct regulator_ops arizona_ldo1_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
};
static const struct regulator_desc arizona_ldo1 = {
.name = "LDO1",
.supply_name = "LDOVDD",
.type = REGULATOR_VOLTAGE,
.ops = &arizona_ldo1_ops,
.vsel_reg = ARIZONA_LDO1_CONTROL_1,
.vsel_mask = ARIZONA_LDO1_VSEL_MASK,
.min_uV = 900000,
.uV_step = 25000,
.n_voltages = 13,
.enable_time = 500,
.ramp_delay = 24000,
.owner = THIS_MODULE,
};
static const struct regulator_init_data arizona_ldo1_dvfs = {
.constraints = {
.min_uV = 1200000,
.max_uV = 1800000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = 1,
};
static const struct regulator_init_data arizona_ldo1_default = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
};
static const struct regulator_init_data arizona_ldo1_wm5110 = {
.constraints = {
.min_uV = 1175000,
.max_uV = 1200000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = 1,
};
static int arizona_ldo1_of_get_pdata(struct arizona_ldo1_pdata *pdata,
struct regulator_config *config,
const struct regulator_desc *desc,
bool *external_dcvdd)
{
struct arizona_ldo1 *ldo1 = config->driver_data;
struct device_node *np = config->dev->of_node;
struct device_node *init_node, *dcvdd_node;
struct regulator_init_data *init_data;
init_node = of_get_child_by_name(np, "ldo1");
dcvdd_node = of_parse_phandle(np, "DCVDD-supply", 0);
if (init_node) {
config->of_node = init_node;
init_data = of_get_regulator_init_data(config->dev, init_node,
desc);
if (init_data) {
init_data->consumer_supplies = &ldo1->supply;
init_data->num_consumer_supplies = 1;
if (dcvdd_node && dcvdd_node != init_node)
*external_dcvdd = true;
pdata->init_data = init_data;
}
} else if (dcvdd_node) {
*external_dcvdd = true;
}
of_node_put(dcvdd_node);
return 0;
}
static int arizona_ldo1_common_init(struct platform_device *pdev,
struct arizona_ldo1 *ldo1,
const struct regulator_desc *desc,
struct arizona_ldo1_pdata *pdata,
bool *external_dcvdd)
{
struct device *parent_dev = pdev->dev.parent;
struct regulator_config config = { };
int ret;
*external_dcvdd = false;
ldo1->supply.supply = "DCVDD";
ldo1->init_data.consumer_supplies = &ldo1->supply;
ldo1->supply.dev_name = dev_name(parent_dev);
config.dev = parent_dev;
config.driver_data = ldo1;
config.regmap = ldo1->regmap;
if (IS_ENABLED(CONFIG_OF)) {
if (!dev_get_platdata(parent_dev)) {
ret = arizona_ldo1_of_get_pdata(pdata,
&config, desc,
external_dcvdd);
if (ret < 0)
return ret;
}
}
/* We assume that high output = regulator off
* Don't use devm, since we need to get against the parent device
* so clean up would happen at the wrong time
*/
config.ena_gpiod = gpiod_get_optional(parent_dev, "wlf,ldoena",
GPIOD_OUT_LOW);
if (IS_ERR(config.ena_gpiod))
return PTR_ERR(config.ena_gpiod);
ldo1->ena_gpiod = config.ena_gpiod;
if (pdata->init_data)
config.init_data = pdata->init_data;
else
config.init_data = &ldo1->init_data;
/*
* LDO1 can only be used to supply DCVDD so if it has no
* consumers then DCVDD is supplied externally.
*/
if (config.init_data->num_consumer_supplies == 0)
*external_dcvdd = true;
ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config);
of_node_put(config.of_node);
if (IS_ERR(ldo1->regulator)) {
if (config.ena_gpiod)
gpiod_put(config.ena_gpiod);
ret = PTR_ERR(ldo1->regulator);
dev_err(&pdev->dev, "Failed to register LDO1 supply: %d\n",
ret);
return ret;
}
platform_set_drvdata(pdev, ldo1);
return 0;
}
static int arizona_ldo1_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
struct arizona_ldo1 *ldo1;
const struct regulator_desc *desc;
bool external_dcvdd;
int ret;
ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
if (!ldo1)
return -ENOMEM;
ldo1->regmap = arizona->regmap;
/*
* Since the chip usually supplies itself we provide some
* default init_data for it. This will be overridden with
* platform data if provided.
*/
switch (arizona->type) {
case WM5102:
case WM8997:
case WM8998:
case WM1814:
desc = &arizona_ldo1_hc;
ldo1->init_data = arizona_ldo1_dvfs;
break;
case WM5110:
case WM8280:
desc = &arizona_ldo1;
ldo1->init_data = arizona_ldo1_wm5110;
break;
default:
desc = &arizona_ldo1;
ldo1->init_data = arizona_ldo1_default;
break;
}
ret = arizona_ldo1_common_init(pdev, ldo1, desc,
&arizona->pdata.ldo1,
&external_dcvdd);
if (ret == 0)
arizona->external_dcvdd = external_dcvdd;
return ret;
}
static int arizona_ldo1_remove(struct platform_device *pdev)
{
struct arizona_ldo1 *ldo1 = platform_get_drvdata(pdev);
if (ldo1->ena_gpiod)
gpiod_put(ldo1->ena_gpiod);
return 0;
}
static struct platform_driver arizona_ldo1_driver = {
.probe = arizona_ldo1_probe,
.remove = arizona_ldo1_remove,
.driver = {
.name = "arizona-ldo1",
},
};
module_platform_driver(arizona_ldo1_driver);
/* Module information */
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("Arizona LDO1 driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:arizona-ldo1");
View git blame Copy permalink