alistair23-linux/kernel/irq/pm.c
Juergen Gross a696712c3d genirq/PM: Properly pretend disabled state when force resuming interrupts
Interrupts with the IRQF_FORCE_RESUME flag set have also the
IRQF_NO_SUSPEND flag set. They are not disabled in the suspend path, but
must be forcefully resumed. That's used by XEN to keep IPIs enabled beyond
the suspension of device irqs. Force resume works by pretending that the
interrupt was disabled and then calling __irq_enable().

Incrementing the disabled depth counter was enough to do that, but with the
recent changes which use state flags to avoid unnecessary hardware access,
this is not longer sufficient. If the state flags are not set, then the
hardware callbacks are not invoked and the interrupt line stays disabled in
"hardware".

Set the disabled and masked state when pretending that an interrupt got
disabled by suspend.

Fixes: bf22ff45be ("genirq: Avoid unnecessary low level irq function calls")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Cc: boris.ostrovsky@oracle.com
Link: http://lkml.kernel.org/r/20170717174703.4603-2-jgross@suse.com
2017-07-17 22:32:20 +02:00

214 lines
5.2 KiB
C

/*
* linux/kernel/irq/pm.c
*
* Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
*
* This file contains power management functions related to interrupts.
*/
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include "internals.h"
bool irq_pm_check_wakeup(struct irq_desc *desc)
{
if (irqd_is_wakeup_armed(&desc->irq_data)) {
irqd_clear(&desc->irq_data, IRQD_WAKEUP_ARMED);
desc->istate |= IRQS_SUSPENDED | IRQS_PENDING;
desc->depth++;
irq_disable(desc);
pm_system_irq_wakeup(irq_desc_get_irq(desc));
return true;
}
return false;
}
/*
* Called from __setup_irq() with desc->lock held after @action has
* been installed in the action chain.
*/
void irq_pm_install_action(struct irq_desc *desc, struct irqaction *action)
{
desc->nr_actions++;
if (action->flags & IRQF_FORCE_RESUME)
desc->force_resume_depth++;
WARN_ON_ONCE(desc->force_resume_depth &&
desc->force_resume_depth != desc->nr_actions);
if (action->flags & IRQF_NO_SUSPEND)
desc->no_suspend_depth++;
else if (action->flags & IRQF_COND_SUSPEND)
desc->cond_suspend_depth++;
WARN_ON_ONCE(desc->no_suspend_depth &&
(desc->no_suspend_depth +
desc->cond_suspend_depth) != desc->nr_actions);
}
/*
* Called from __free_irq() with desc->lock held after @action has
* been removed from the action chain.
*/
void irq_pm_remove_action(struct irq_desc *desc, struct irqaction *action)
{
desc->nr_actions--;
if (action->flags & IRQF_FORCE_RESUME)
desc->force_resume_depth--;
if (action->flags & IRQF_NO_SUSPEND)
desc->no_suspend_depth--;
else if (action->flags & IRQF_COND_SUSPEND)
desc->cond_suspend_depth--;
}
static bool suspend_device_irq(struct irq_desc *desc)
{
if (!desc->action || irq_desc_is_chained(desc) ||
desc->no_suspend_depth)
return false;
if (irqd_is_wakeup_set(&desc->irq_data)) {
irqd_set(&desc->irq_data, IRQD_WAKEUP_ARMED);
/*
* We return true here to force the caller to issue
* synchronize_irq(). We need to make sure that the
* IRQD_WAKEUP_ARMED is visible before we return from
* suspend_device_irqs().
*/
return true;
}
desc->istate |= IRQS_SUSPENDED;
__disable_irq(desc);
/*
* Hardware which has no wakeup source configuration facility
* requires that the non wakeup interrupts are masked at the
* chip level. The chip implementation indicates that with
* IRQCHIP_MASK_ON_SUSPEND.
*/
if (irq_desc_get_chip(desc)->flags & IRQCHIP_MASK_ON_SUSPEND)
mask_irq(desc);
return true;
}
/**
* suspend_device_irqs - disable all currently enabled interrupt lines
*
* During system-wide suspend or hibernation device drivers need to be
* prevented from receiving interrupts and this function is provided
* for this purpose.
*
* So we disable all interrupts and mark them IRQS_SUSPENDED except
* for those which are unused, those which are marked as not
* suspendable via an interrupt request with the flag IRQF_NO_SUSPEND
* set and those which are marked as active wakeup sources.
*
* The active wakeup sources are handled by the flow handler entry
* code which checks for the IRQD_WAKEUP_ARMED flag, suspends the
* interrupt and notifies the pm core about the wakeup.
*/
void suspend_device_irqs(void)
{
struct irq_desc *desc;
int irq;
for_each_irq_desc(irq, desc) {
unsigned long flags;
bool sync;
if (irq_settings_is_nested_thread(desc))
continue;
raw_spin_lock_irqsave(&desc->lock, flags);
sync = suspend_device_irq(desc);
raw_spin_unlock_irqrestore(&desc->lock, flags);
if (sync)
synchronize_irq(irq);
}
}
EXPORT_SYMBOL_GPL(suspend_device_irqs);
static void resume_irq(struct irq_desc *desc)
{
irqd_clear(&desc->irq_data, IRQD_WAKEUP_ARMED);
if (desc->istate & IRQS_SUSPENDED)
goto resume;
/* Force resume the interrupt? */
if (!desc->force_resume_depth)
return;
/* Pretend that it got disabled ! */
desc->depth++;
irq_state_set_disabled(desc);
irq_state_set_masked(desc);
resume:
desc->istate &= ~IRQS_SUSPENDED;
__enable_irq(desc);
}
static void resume_irqs(bool want_early)
{
struct irq_desc *desc;
int irq;
for_each_irq_desc(irq, desc) {
unsigned long flags;
bool is_early = desc->action &&
desc->action->flags & IRQF_EARLY_RESUME;
if (!is_early && want_early)
continue;
if (irq_settings_is_nested_thread(desc))
continue;
raw_spin_lock_irqsave(&desc->lock, flags);
resume_irq(desc);
raw_spin_unlock_irqrestore(&desc->lock, flags);
}
}
/**
* irq_pm_syscore_ops - enable interrupt lines early
*
* Enable all interrupt lines with %IRQF_EARLY_RESUME set.
*/
static void irq_pm_syscore_resume(void)
{
resume_irqs(true);
}
static struct syscore_ops irq_pm_syscore_ops = {
.resume = irq_pm_syscore_resume,
};
static int __init irq_pm_init_ops(void)
{
register_syscore_ops(&irq_pm_syscore_ops);
return 0;
}
device_initcall(irq_pm_init_ops);
/**
* resume_device_irqs - enable interrupt lines disabled by suspend_device_irqs()
*
* Enable all non-%IRQF_EARLY_RESUME interrupt lines previously
* disabled by suspend_device_irqs() that have the IRQS_SUSPENDED flag
* set as well as those with %IRQF_FORCE_RESUME.
*/
void resume_device_irqs(void)
{
resume_irqs(false);
}
EXPORT_SYMBOL_GPL(resume_device_irqs);