![Russell King](/assets/img/avatar_default.png)
Move the PXA2xx/IXP4xx UDC header file into linux/platform_data as it only contains a driver platform data structure. Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2366 lines
58 KiB
C
2366 lines
58 KiB
C
/*
|
|
* Intel PXA25x and IXP4xx on-chip full speed USB device controllers
|
|
*
|
|
* Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
|
|
* Copyright (C) 2003 Robert Schwebel, Pengutronix
|
|
* Copyright (C) 2003 Benedikt Spranger, Pengutronix
|
|
* Copyright (C) 2003 David Brownell
|
|
* Copyright (C) 2003 Joshua Wise
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
/* #define VERBOSE_DEBUG */
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/list.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/platform_data/pxa2xx_udc.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/io.h>
|
|
#include <linux/prefetch.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/otg.h>
|
|
|
|
/*
|
|
* This driver is PXA25x only. Grab the right register definitions.
|
|
*/
|
|
#ifdef CONFIG_ARCH_PXA
|
|
#include <mach/pxa25x-udc.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_LUBBOCK
|
|
#include <mach/lubbock.h>
|
|
#endif
|
|
|
|
/*
|
|
* This driver handles the USB Device Controller (UDC) in Intel's PXA 25x
|
|
* series processors. The UDC for the IXP 4xx series is very similar.
|
|
* There are fifteen endpoints, in addition to ep0.
|
|
*
|
|
* Such controller drivers work with a gadget driver. The gadget driver
|
|
* returns descriptors, implements configuration and data protocols used
|
|
* by the host to interact with this device, and allocates endpoints to
|
|
* the different protocol interfaces. The controller driver virtualizes
|
|
* usb hardware so that the gadget drivers will be more portable.
|
|
*
|
|
* This UDC hardware wants to implement a bit too much USB protocol, so
|
|
* it constrains the sorts of USB configuration change events that work.
|
|
* The errata for these chips are misleading; some "fixed" bugs from
|
|
* pxa250 a0/a1 b0/b1/b2 sure act like they're still there.
|
|
*
|
|
* Note that the UDC hardware supports DMA (except on IXP) but that's
|
|
* not used here. IN-DMA (to host) is simple enough, when the data is
|
|
* suitably aligned (16 bytes) ... the network stack doesn't do that,
|
|
* other software can. OUT-DMA is buggy in most chip versions, as well
|
|
* as poorly designed (data toggle not automatic). So this driver won't
|
|
* bother using DMA. (Mostly-working IN-DMA support was available in
|
|
* kernels before 2.6.23, but was never enabled or well tested.)
|
|
*/
|
|
|
|
#define DRIVER_VERSION "30-June-2007"
|
|
#define DRIVER_DESC "PXA 25x USB Device Controller driver"
|
|
|
|
|
|
static const char driver_name [] = "pxa25x_udc";
|
|
|
|
static const char ep0name [] = "ep0";
|
|
|
|
|
|
#ifdef CONFIG_ARCH_IXP4XX
|
|
|
|
/* cpu-specific register addresses are compiled in to this code */
|
|
#ifdef CONFIG_ARCH_PXA
|
|
#error "Can't configure both IXP and PXA"
|
|
#endif
|
|
|
|
/* IXP doesn't yet support <linux/clk.h> */
|
|
#define clk_get(dev,name) NULL
|
|
#define clk_enable(clk) do { } while (0)
|
|
#define clk_disable(clk) do { } while (0)
|
|
#define clk_put(clk) do { } while (0)
|
|
|
|
#endif
|
|
|
|
#include "pxa25x_udc.h"
|
|
|
|
|
|
#ifdef CONFIG_USB_PXA25X_SMALL
|
|
#define SIZE_STR " (small)"
|
|
#else
|
|
#define SIZE_STR ""
|
|
#endif
|
|
|
|
/* ---------------------------------------------------------------------------
|
|
* endpoint related parts of the api to the usb controller hardware,
|
|
* used by gadget driver; and the inner talker-to-hardware core.
|
|
* ---------------------------------------------------------------------------
|
|
*/
|
|
|
|
static void pxa25x_ep_fifo_flush (struct usb_ep *ep);
|
|
static void nuke (struct pxa25x_ep *, int status);
|
|
|
|
/* one GPIO should control a D+ pullup, so host sees this device (or not) */
|
|
static void pullup_off(void)
|
|
{
|
|
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
|
|
int off_level = mach->gpio_pullup_inverted;
|
|
|
|
if (gpio_is_valid(mach->gpio_pullup))
|
|
gpio_set_value(mach->gpio_pullup, off_level);
|
|
else if (mach->udc_command)
|
|
mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
|
|
}
|
|
|
|
static void pullup_on(void)
|
|
{
|
|
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
|
|
int on_level = !mach->gpio_pullup_inverted;
|
|
|
|
if (gpio_is_valid(mach->gpio_pullup))
|
|
gpio_set_value(mach->gpio_pullup, on_level);
|
|
else if (mach->udc_command)
|
|
mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
|
|
}
|
|
|
|
static void pio_irq_enable(int bEndpointAddress)
|
|
{
|
|
bEndpointAddress &= 0xf;
|
|
if (bEndpointAddress < 8)
|
|
UICR0 &= ~(1 << bEndpointAddress);
|
|
else {
|
|
bEndpointAddress -= 8;
|
|
UICR1 &= ~(1 << bEndpointAddress);
|
|
}
|
|
}
|
|
|
|
static void pio_irq_disable(int bEndpointAddress)
|
|
{
|
|
bEndpointAddress &= 0xf;
|
|
if (bEndpointAddress < 8)
|
|
UICR0 |= 1 << bEndpointAddress;
|
|
else {
|
|
bEndpointAddress -= 8;
|
|
UICR1 |= 1 << bEndpointAddress;
|
|
}
|
|
}
|
|
|
|
/* The UDCCR reg contains mask and interrupt status bits,
|
|
* so using '|=' isn't safe as it may ack an interrupt.
|
|
*/
|
|
#define UDCCR_MASK_BITS (UDCCR_REM | UDCCR_SRM | UDCCR_UDE)
|
|
|
|
static inline void udc_set_mask_UDCCR(int mask)
|
|
{
|
|
UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS);
|
|
}
|
|
|
|
static inline void udc_clear_mask_UDCCR(int mask)
|
|
{
|
|
UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS);
|
|
}
|
|
|
|
static inline void udc_ack_int_UDCCR(int mask)
|
|
{
|
|
/* udccr contains the bits we dont want to change */
|
|
__u32 udccr = UDCCR & UDCCR_MASK_BITS;
|
|
|
|
UDCCR = udccr | (mask & ~UDCCR_MASK_BITS);
|
|
}
|
|
|
|
/*
|
|
* endpoint enable/disable
|
|
*
|
|
* we need to verify the descriptors used to enable endpoints. since pxa25x
|
|
* endpoint configurations are fixed, and are pretty much always enabled,
|
|
* there's not a lot to manage here.
|
|
*
|
|
* because pxa25x can't selectively initialize bulk (or interrupt) endpoints,
|
|
* (resetting endpoint halt and toggle), SET_INTERFACE is unusable except
|
|
* for a single interface (with only the default altsetting) and for gadget
|
|
* drivers that don't halt endpoints (not reset by set_interface). that also
|
|
* means that if you use ISO, you must violate the USB spec rule that all
|
|
* iso endpoints must be in non-default altsettings.
|
|
*/
|
|
static int pxa25x_ep_enable (struct usb_ep *_ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
struct pxa25x_ep *ep;
|
|
struct pxa25x_udc *dev;
|
|
|
|
ep = container_of (_ep, struct pxa25x_ep, ep);
|
|
if (!_ep || !desc || _ep->name == ep0name
|
|
|| desc->bDescriptorType != USB_DT_ENDPOINT
|
|
|| ep->bEndpointAddress != desc->bEndpointAddress
|
|
|| ep->fifo_size < usb_endpoint_maxp (desc)) {
|
|
DMSG("%s, bad ep or descriptor\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* xfer types must match, except that interrupt ~= bulk */
|
|
if (ep->bmAttributes != desc->bmAttributes
|
|
&& ep->bmAttributes != USB_ENDPOINT_XFER_BULK
|
|
&& desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
|
|
DMSG("%s, %s type mismatch\n", __func__, _ep->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* hardware _could_ do smaller, but driver doesn't */
|
|
if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
|
|
&& usb_endpoint_maxp (desc)
|
|
!= BULK_FIFO_SIZE)
|
|
|| !desc->wMaxPacketSize) {
|
|
DMSG("%s, bad %s maxpacket\n", __func__, _ep->name);
|
|
return -ERANGE;
|
|
}
|
|
|
|
dev = ep->dev;
|
|
if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
|
|
DMSG("%s, bogus device state\n", __func__);
|
|
return -ESHUTDOWN;
|
|
}
|
|
|
|
ep->ep.desc = desc;
|
|
ep->stopped = 0;
|
|
ep->pio_irqs = 0;
|
|
ep->ep.maxpacket = usb_endpoint_maxp (desc);
|
|
|
|
/* flush fifo (mostly for OUT buffers) */
|
|
pxa25x_ep_fifo_flush (_ep);
|
|
|
|
/* ... reset halt state too, if we could ... */
|
|
|
|
DBG(DBG_VERBOSE, "enabled %s\n", _ep->name);
|
|
return 0;
|
|
}
|
|
|
|
static int pxa25x_ep_disable (struct usb_ep *_ep)
|
|
{
|
|
struct pxa25x_ep *ep;
|
|
unsigned long flags;
|
|
|
|
ep = container_of (_ep, struct pxa25x_ep, ep);
|
|
if (!_ep || !ep->ep.desc) {
|
|
DMSG("%s, %s not enabled\n", __func__,
|
|
_ep ? ep->ep.name : NULL);
|
|
return -EINVAL;
|
|
}
|
|
local_irq_save(flags);
|
|
|
|
nuke (ep, -ESHUTDOWN);
|
|
|
|
/* flush fifo (mostly for IN buffers) */
|
|
pxa25x_ep_fifo_flush (_ep);
|
|
|
|
ep->ep.desc = NULL;
|
|
ep->stopped = 1;
|
|
|
|
local_irq_restore(flags);
|
|
DBG(DBG_VERBOSE, "%s disabled\n", _ep->name);
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* for the pxa25x, these can just wrap kmalloc/kfree. gadget drivers
|
|
* must still pass correctly initialized endpoints, since other controller
|
|
* drivers may care about how it's currently set up (dma issues etc).
|
|
*/
|
|
|
|
/*
|
|
* pxa25x_ep_alloc_request - allocate a request data structure
|
|
*/
|
|
static struct usb_request *
|
|
pxa25x_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
|
|
{
|
|
struct pxa25x_request *req;
|
|
|
|
req = kzalloc(sizeof(*req), gfp_flags);
|
|
if (!req)
|
|
return NULL;
|
|
|
|
INIT_LIST_HEAD (&req->queue);
|
|
return &req->req;
|
|
}
|
|
|
|
|
|
/*
|
|
* pxa25x_ep_free_request - deallocate a request data structure
|
|
*/
|
|
static void
|
|
pxa25x_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
|
|
{
|
|
struct pxa25x_request *req;
|
|
|
|
req = container_of (_req, struct pxa25x_request, req);
|
|
WARN_ON(!list_empty (&req->queue));
|
|
kfree(req);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* done - retire a request; caller blocked irqs
|
|
*/
|
|
static void done(struct pxa25x_ep *ep, struct pxa25x_request *req, int status)
|
|
{
|
|
unsigned stopped = ep->stopped;
|
|
|
|
list_del_init(&req->queue);
|
|
|
|
if (likely (req->req.status == -EINPROGRESS))
|
|
req->req.status = status;
|
|
else
|
|
status = req->req.status;
|
|
|
|
if (status && status != -ESHUTDOWN)
|
|
DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n",
|
|
ep->ep.name, &req->req, status,
|
|
req->req.actual, req->req.length);
|
|
|
|
/* don't modify queue heads during completion callback */
|
|
ep->stopped = 1;
|
|
req->req.complete(&ep->ep, &req->req);
|
|
ep->stopped = stopped;
|
|
}
|
|
|
|
|
|
static inline void ep0_idle (struct pxa25x_udc *dev)
|
|
{
|
|
dev->ep0state = EP0_IDLE;
|
|
}
|
|
|
|
static int
|
|
write_packet(volatile u32 *uddr, struct pxa25x_request *req, unsigned max)
|
|
{
|
|
u8 *buf;
|
|
unsigned length, count;
|
|
|
|
buf = req->req.buf + req->req.actual;
|
|
prefetch(buf);
|
|
|
|
/* how big will this packet be? */
|
|
length = min(req->req.length - req->req.actual, max);
|
|
req->req.actual += length;
|
|
|
|
count = length;
|
|
while (likely(count--))
|
|
*uddr = *buf++;
|
|
|
|
return length;
|
|
}
|
|
|
|
/*
|
|
* write to an IN endpoint fifo, as many packets as possible.
|
|
* irqs will use this to write the rest later.
|
|
* caller guarantees at least one packet buffer is ready (or a zlp).
|
|
*/
|
|
static int
|
|
write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
|
|
{
|
|
unsigned max;
|
|
|
|
max = usb_endpoint_maxp(ep->ep.desc);
|
|
do {
|
|
unsigned count;
|
|
int is_last, is_short;
|
|
|
|
count = write_packet(ep->reg_uddr, req, max);
|
|
|
|
/* last packet is usually short (or a zlp) */
|
|
if (unlikely (count != max))
|
|
is_last = is_short = 1;
|
|
else {
|
|
if (likely(req->req.length != req->req.actual)
|
|
|| req->req.zero)
|
|
is_last = 0;
|
|
else
|
|
is_last = 1;
|
|
/* interrupt/iso maxpacket may not fill the fifo */
|
|
is_short = unlikely (max < ep->fifo_size);
|
|
}
|
|
|
|
DBG(DBG_VERY_NOISY, "wrote %s %d bytes%s%s %d left %p\n",
|
|
ep->ep.name, count,
|
|
is_last ? "/L" : "", is_short ? "/S" : "",
|
|
req->req.length - req->req.actual, req);
|
|
|
|
/* let loose that packet. maybe try writing another one,
|
|
* double buffering might work. TSP, TPC, and TFS
|
|
* bit values are the same for all normal IN endpoints.
|
|
*/
|
|
*ep->reg_udccs = UDCCS_BI_TPC;
|
|
if (is_short)
|
|
*ep->reg_udccs = UDCCS_BI_TSP;
|
|
|
|
/* requests complete when all IN data is in the FIFO */
|
|
if (is_last) {
|
|
done (ep, req, 0);
|
|
if (list_empty(&ep->queue))
|
|
pio_irq_disable (ep->bEndpointAddress);
|
|
return 1;
|
|
}
|
|
|
|
// TODO experiment: how robust can fifo mode tweaking be?
|
|
// double buffering is off in the default fifo mode, which
|
|
// prevents TFS from being set here.
|
|
|
|
} while (*ep->reg_udccs & UDCCS_BI_TFS);
|
|
return 0;
|
|
}
|
|
|
|
/* caller asserts req->pending (ep0 irq status nyet cleared); starts
|
|
* ep0 data stage. these chips want very simple state transitions.
|
|
*/
|
|
static inline
|
|
void ep0start(struct pxa25x_udc *dev, u32 flags, const char *tag)
|
|
{
|
|
UDCCS0 = flags|UDCCS0_SA|UDCCS0_OPR;
|
|
USIR0 = USIR0_IR0;
|
|
dev->req_pending = 0;
|
|
DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n",
|
|
__func__, tag, UDCCS0, flags);
|
|
}
|
|
|
|
static int
|
|
write_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
|
|
{
|
|
unsigned count;
|
|
int is_short;
|
|
|
|
count = write_packet(&UDDR0, req, EP0_FIFO_SIZE);
|
|
ep->dev->stats.write.bytes += count;
|
|
|
|
/* last packet "must be" short (or a zlp) */
|
|
is_short = (count != EP0_FIFO_SIZE);
|
|
|
|
DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count,
|
|
req->req.length - req->req.actual, req);
|
|
|
|
if (unlikely (is_short)) {
|
|
if (ep->dev->req_pending)
|
|
ep0start(ep->dev, UDCCS0_IPR, "short IN");
|
|
else
|
|
UDCCS0 = UDCCS0_IPR;
|
|
|
|
count = req->req.length;
|
|
done (ep, req, 0);
|
|
ep0_idle(ep->dev);
|
|
#ifndef CONFIG_ARCH_IXP4XX
|
|
#if 1
|
|
/* This seems to get rid of lost status irqs in some cases:
|
|
* host responds quickly, or next request involves config
|
|
* change automagic, or should have been hidden, or ...
|
|
*
|
|
* FIXME get rid of all udelays possible...
|
|
*/
|
|
if (count >= EP0_FIFO_SIZE) {
|
|
count = 100;
|
|
do {
|
|
if ((UDCCS0 & UDCCS0_OPR) != 0) {
|
|
/* clear OPR, generate ack */
|
|
UDCCS0 = UDCCS0_OPR;
|
|
break;
|
|
}
|
|
count--;
|
|
udelay(1);
|
|
} while (count);
|
|
}
|
|
#endif
|
|
#endif
|
|
} else if (ep->dev->req_pending)
|
|
ep0start(ep->dev, 0, "IN");
|
|
return is_short;
|
|
}
|
|
|
|
|
|
/*
|
|
* read_fifo - unload packet(s) from the fifo we use for usb OUT
|
|
* transfers and put them into the request. caller should have made
|
|
* sure there's at least one packet ready.
|
|
*
|
|
* returns true if the request completed because of short packet or the
|
|
* request buffer having filled (and maybe overran till end-of-packet).
|
|
*/
|
|
static int
|
|
read_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
|
|
{
|
|
for (;;) {
|
|
u32 udccs;
|
|
u8 *buf;
|
|
unsigned bufferspace, count, is_short;
|
|
|
|
/* make sure there's a packet in the FIFO.
|
|
* UDCCS_{BO,IO}_RPC are all the same bit value.
|
|
* UDCCS_{BO,IO}_RNE are all the same bit value.
|
|
*/
|
|
udccs = *ep->reg_udccs;
|
|
if (unlikely ((udccs & UDCCS_BO_RPC) == 0))
|
|
break;
|
|
buf = req->req.buf + req->req.actual;
|
|
prefetchw(buf);
|
|
bufferspace = req->req.length - req->req.actual;
|
|
|
|
/* read all bytes from this packet */
|
|
if (likely (udccs & UDCCS_BO_RNE)) {
|
|
count = 1 + (0x0ff & *ep->reg_ubcr);
|
|
req->req.actual += min (count, bufferspace);
|
|
} else /* zlp */
|
|
count = 0;
|
|
is_short = (count < ep->ep.maxpacket);
|
|
DBG(DBG_VERY_NOISY, "read %s %02x, %d bytes%s req %p %d/%d\n",
|
|
ep->ep.name, udccs, count,
|
|
is_short ? "/S" : "",
|
|
req, req->req.actual, req->req.length);
|
|
while (likely (count-- != 0)) {
|
|
u8 byte = (u8) *ep->reg_uddr;
|
|
|
|
if (unlikely (bufferspace == 0)) {
|
|
/* this happens when the driver's buffer
|
|
* is smaller than what the host sent.
|
|
* discard the extra data.
|
|
*/
|
|
if (req->req.status != -EOVERFLOW)
|
|
DMSG("%s overflow %d\n",
|
|
ep->ep.name, count);
|
|
req->req.status = -EOVERFLOW;
|
|
} else {
|
|
*buf++ = byte;
|
|
bufferspace--;
|
|
}
|
|
}
|
|
*ep->reg_udccs = UDCCS_BO_RPC;
|
|
/* RPC/RSP/RNE could now reflect the other packet buffer */
|
|
|
|
/* iso is one request per packet */
|
|
if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
|
|
if (udccs & UDCCS_IO_ROF)
|
|
req->req.status = -EHOSTUNREACH;
|
|
/* more like "is_done" */
|
|
is_short = 1;
|
|
}
|
|
|
|
/* completion */
|
|
if (is_short || req->req.actual == req->req.length) {
|
|
done (ep, req, 0);
|
|
if (list_empty(&ep->queue))
|
|
pio_irq_disable (ep->bEndpointAddress);
|
|
return 1;
|
|
}
|
|
|
|
/* finished that packet. the next one may be waiting... */
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* special ep0 version of the above. no UBCR0 or double buffering; status
|
|
* handshaking is magic. most device protocols don't need control-OUT.
|
|
* CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other
|
|
* protocols do use them.
|
|
*/
|
|
static int
|
|
read_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
|
|
{
|
|
u8 *buf, byte;
|
|
unsigned bufferspace;
|
|
|
|
buf = req->req.buf + req->req.actual;
|
|
bufferspace = req->req.length - req->req.actual;
|
|
|
|
while (UDCCS0 & UDCCS0_RNE) {
|
|
byte = (u8) UDDR0;
|
|
|
|
if (unlikely (bufferspace == 0)) {
|
|
/* this happens when the driver's buffer
|
|
* is smaller than what the host sent.
|
|
* discard the extra data.
|
|
*/
|
|
if (req->req.status != -EOVERFLOW)
|
|
DMSG("%s overflow\n", ep->ep.name);
|
|
req->req.status = -EOVERFLOW;
|
|
} else {
|
|
*buf++ = byte;
|
|
req->req.actual++;
|
|
bufferspace--;
|
|
}
|
|
}
|
|
|
|
UDCCS0 = UDCCS0_OPR | UDCCS0_IPR;
|
|
|
|
/* completion */
|
|
if (req->req.actual >= req->req.length)
|
|
return 1;
|
|
|
|
/* finished that packet. the next one may be waiting... */
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int
|
|
pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
|
|
{
|
|
struct pxa25x_request *req;
|
|
struct pxa25x_ep *ep;
|
|
struct pxa25x_udc *dev;
|
|
unsigned long flags;
|
|
|
|
req = container_of(_req, struct pxa25x_request, req);
|
|
if (unlikely (!_req || !_req->complete || !_req->buf
|
|
|| !list_empty(&req->queue))) {
|
|
DMSG("%s, bad params\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ep = container_of(_ep, struct pxa25x_ep, ep);
|
|
if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) {
|
|
DMSG("%s, bad ep\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev = ep->dev;
|
|
if (unlikely (!dev->driver
|
|
|| dev->gadget.speed == USB_SPEED_UNKNOWN)) {
|
|
DMSG("%s, bogus device state\n", __func__);
|
|
return -ESHUTDOWN;
|
|
}
|
|
|
|
/* iso is always one packet per request, that's the only way
|
|
* we can report per-packet status. that also helps with dma.
|
|
*/
|
|
if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
|
|
&& req->req.length > usb_endpoint_maxp(ep->ep.desc)))
|
|
return -EMSGSIZE;
|
|
|
|
DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
|
|
_ep->name, _req, _req->length, _req->buf);
|
|
|
|
local_irq_save(flags);
|
|
|
|
_req->status = -EINPROGRESS;
|
|
_req->actual = 0;
|
|
|
|
/* kickstart this i/o queue? */
|
|
if (list_empty(&ep->queue) && !ep->stopped) {
|
|
if (ep->ep.desc == NULL/* ep0 */) {
|
|
unsigned length = _req->length;
|
|
|
|
switch (dev->ep0state) {
|
|
case EP0_IN_DATA_PHASE:
|
|
dev->stats.write.ops++;
|
|
if (write_ep0_fifo(ep, req))
|
|
req = NULL;
|
|
break;
|
|
|
|
case EP0_OUT_DATA_PHASE:
|
|
dev->stats.read.ops++;
|
|
/* messy ... */
|
|
if (dev->req_config) {
|
|
DBG(DBG_VERBOSE, "ep0 config ack%s\n",
|
|
dev->has_cfr ? "" : " raced");
|
|
if (dev->has_cfr)
|
|
UDCCFR = UDCCFR_AREN|UDCCFR_ACM
|
|
|UDCCFR_MB1;
|
|
done(ep, req, 0);
|
|
dev->ep0state = EP0_END_XFER;
|
|
local_irq_restore (flags);
|
|
return 0;
|
|
}
|
|
if (dev->req_pending)
|
|
ep0start(dev, UDCCS0_IPR, "OUT");
|
|
if (length == 0 || ((UDCCS0 & UDCCS0_RNE) != 0
|
|
&& read_ep0_fifo(ep, req))) {
|
|
ep0_idle(dev);
|
|
done(ep, req, 0);
|
|
req = NULL;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
DMSG("ep0 i/o, odd state %d\n", dev->ep0state);
|
|
local_irq_restore (flags);
|
|
return -EL2HLT;
|
|
}
|
|
/* can the FIFO can satisfy the request immediately? */
|
|
} else if ((ep->bEndpointAddress & USB_DIR_IN) != 0) {
|
|
if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0
|
|
&& write_fifo(ep, req))
|
|
req = NULL;
|
|
} else if ((*ep->reg_udccs & UDCCS_BO_RFS) != 0
|
|
&& read_fifo(ep, req)) {
|
|
req = NULL;
|
|
}
|
|
|
|
if (likely(req && ep->ep.desc))
|
|
pio_irq_enable(ep->bEndpointAddress);
|
|
}
|
|
|
|
/* pio or dma irq handler advances the queue. */
|
|
if (likely(req != NULL))
|
|
list_add_tail(&req->queue, &ep->queue);
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* nuke - dequeue ALL requests
|
|
*/
|
|
static void nuke(struct pxa25x_ep *ep, int status)
|
|
{
|
|
struct pxa25x_request *req;
|
|
|
|
/* called with irqs blocked */
|
|
while (!list_empty(&ep->queue)) {
|
|
req = list_entry(ep->queue.next,
|
|
struct pxa25x_request,
|
|
queue);
|
|
done(ep, req, status);
|
|
}
|
|
if (ep->ep.desc)
|
|
pio_irq_disable (ep->bEndpointAddress);
|
|
}
|
|
|
|
|
|
/* dequeue JUST ONE request */
|
|
static int pxa25x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
|
|
{
|
|
struct pxa25x_ep *ep;
|
|
struct pxa25x_request *req;
|
|
unsigned long flags;
|
|
|
|
ep = container_of(_ep, struct pxa25x_ep, ep);
|
|
if (!_ep || ep->ep.name == ep0name)
|
|
return -EINVAL;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* make sure it's actually queued on this endpoint */
|
|
list_for_each_entry (req, &ep->queue, queue) {
|
|
if (&req->req == _req)
|
|
break;
|
|
}
|
|
if (&req->req != _req) {
|
|
local_irq_restore(flags);
|
|
return -EINVAL;
|
|
}
|
|
|
|
done(ep, req, -ECONNRESET);
|
|
|
|
local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value)
|
|
{
|
|
struct pxa25x_ep *ep;
|
|
unsigned long flags;
|
|
|
|
ep = container_of(_ep, struct pxa25x_ep, ep);
|
|
if (unlikely (!_ep
|
|
|| (!ep->ep.desc && ep->ep.name != ep0name))
|
|
|| ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
|
|
DMSG("%s, bad ep\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
if (value == 0) {
|
|
/* this path (reset toggle+halt) is needed to implement
|
|
* SET_INTERFACE on normal hardware. but it can't be
|
|
* done from software on the PXA UDC, and the hardware
|
|
* forgets to do it as part of SET_INTERFACE automagic.
|
|
*/
|
|
DMSG("only host can clear %s halt\n", _ep->name);
|
|
return -EROFS;
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
|
|
if ((ep->bEndpointAddress & USB_DIR_IN) != 0
|
|
&& ((*ep->reg_udccs & UDCCS_BI_TFS) == 0
|
|
|| !list_empty(&ep->queue))) {
|
|
local_irq_restore(flags);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
/* FST bit is the same for control, bulk in, bulk out, interrupt in */
|
|
*ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF;
|
|
|
|
/* ep0 needs special care */
|
|
if (!ep->ep.desc) {
|
|
start_watchdog(ep->dev);
|
|
ep->dev->req_pending = 0;
|
|
ep->dev->ep0state = EP0_STALL;
|
|
|
|
/* and bulk/intr endpoints like dropping stalls too */
|
|
} else {
|
|
unsigned i;
|
|
for (i = 0; i < 1000; i += 20) {
|
|
if (*ep->reg_udccs & UDCCS_BI_SST)
|
|
break;
|
|
udelay(20);
|
|
}
|
|
}
|
|
local_irq_restore(flags);
|
|
|
|
DBG(DBG_VERBOSE, "%s halt\n", _ep->name);
|
|
return 0;
|
|
}
|
|
|
|
static int pxa25x_ep_fifo_status(struct usb_ep *_ep)
|
|
{
|
|
struct pxa25x_ep *ep;
|
|
|
|
ep = container_of(_ep, struct pxa25x_ep, ep);
|
|
if (!_ep) {
|
|
DMSG("%s, bad ep\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
/* pxa can't report unclaimed bytes from IN fifos */
|
|
if ((ep->bEndpointAddress & USB_DIR_IN) != 0)
|
|
return -EOPNOTSUPP;
|
|
if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN
|
|
|| (*ep->reg_udccs & UDCCS_BO_RFS) == 0)
|
|
return 0;
|
|
else
|
|
return (*ep->reg_ubcr & 0xfff) + 1;
|
|
}
|
|
|
|
static void pxa25x_ep_fifo_flush(struct usb_ep *_ep)
|
|
{
|
|
struct pxa25x_ep *ep;
|
|
|
|
ep = container_of(_ep, struct pxa25x_ep, ep);
|
|
if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) {
|
|
DMSG("%s, bad ep\n", __func__);
|
|
return;
|
|
}
|
|
|
|
/* toggle and halt bits stay unchanged */
|
|
|
|
/* for OUT, just read and discard the FIFO contents. */
|
|
if ((ep->bEndpointAddress & USB_DIR_IN) == 0) {
|
|
while (((*ep->reg_udccs) & UDCCS_BO_RNE) != 0)
|
|
(void) *ep->reg_uddr;
|
|
return;
|
|
}
|
|
|
|
/* most IN status is the same, but ISO can't stall */
|
|
*ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
|
|
| (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
|
|
? 0 : UDCCS_BI_SST);
|
|
}
|
|
|
|
|
|
static struct usb_ep_ops pxa25x_ep_ops = {
|
|
.enable = pxa25x_ep_enable,
|
|
.disable = pxa25x_ep_disable,
|
|
|
|
.alloc_request = pxa25x_ep_alloc_request,
|
|
.free_request = pxa25x_ep_free_request,
|
|
|
|
.queue = pxa25x_ep_queue,
|
|
.dequeue = pxa25x_ep_dequeue,
|
|
|
|
.set_halt = pxa25x_ep_set_halt,
|
|
.fifo_status = pxa25x_ep_fifo_status,
|
|
.fifo_flush = pxa25x_ep_fifo_flush,
|
|
};
|
|
|
|
|
|
/* ---------------------------------------------------------------------------
|
|
* device-scoped parts of the api to the usb controller hardware
|
|
* ---------------------------------------------------------------------------
|
|
*/
|
|
|
|
static int pxa25x_udc_get_frame(struct usb_gadget *_gadget)
|
|
{
|
|
return ((UFNRH & 0x07) << 8) | (UFNRL & 0xff);
|
|
}
|
|
|
|
static int pxa25x_udc_wakeup(struct usb_gadget *_gadget)
|
|
{
|
|
/* host may not have enabled remote wakeup */
|
|
if ((UDCCS0 & UDCCS0_DRWF) == 0)
|
|
return -EHOSTUNREACH;
|
|
udc_set_mask_UDCCR(UDCCR_RSM);
|
|
return 0;
|
|
}
|
|
|
|
static void stop_activity(struct pxa25x_udc *, struct usb_gadget_driver *);
|
|
static void udc_enable (struct pxa25x_udc *);
|
|
static void udc_disable(struct pxa25x_udc *);
|
|
|
|
/* We disable the UDC -- and its 48 MHz clock -- whenever it's not
|
|
* in active use.
|
|
*/
|
|
static int pullup(struct pxa25x_udc *udc)
|
|
{
|
|
int is_active = udc->vbus && udc->pullup && !udc->suspended;
|
|
DMSG("%s\n", is_active ? "active" : "inactive");
|
|
if (is_active) {
|
|
if (!udc->active) {
|
|
udc->active = 1;
|
|
/* Enable clock for USB device */
|
|
clk_enable(udc->clk);
|
|
udc_enable(udc);
|
|
}
|
|
} else {
|
|
if (udc->active) {
|
|
if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
|
|
DMSG("disconnect %s\n", udc->driver
|
|
? udc->driver->driver.name
|
|
: "(no driver)");
|
|
stop_activity(udc, udc->driver);
|
|
}
|
|
udc_disable(udc);
|
|
/* Disable clock for USB device */
|
|
clk_disable(udc->clk);
|
|
udc->active = 0;
|
|
}
|
|
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* VBUS reporting logically comes from a transceiver */
|
|
static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
|
|
{
|
|
struct pxa25x_udc *udc;
|
|
|
|
udc = container_of(_gadget, struct pxa25x_udc, gadget);
|
|
udc->vbus = is_active;
|
|
DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
|
|
pullup(udc);
|
|
return 0;
|
|
}
|
|
|
|
/* drivers may have software control over D+ pullup */
|
|
static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
|
|
{
|
|
struct pxa25x_udc *udc;
|
|
|
|
udc = container_of(_gadget, struct pxa25x_udc, gadget);
|
|
|
|
/* not all boards support pullup control */
|
|
if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
|
|
return -EOPNOTSUPP;
|
|
|
|
udc->pullup = (is_active != 0);
|
|
pullup(udc);
|
|
return 0;
|
|
}
|
|
|
|
/* boards may consume current from VBUS, up to 100-500mA based on config.
|
|
* the 500uA suspend ceiling means that exclusively vbus-powered PXA designs
|
|
* violate USB specs.
|
|
*/
|
|
static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
|
|
{
|
|
struct pxa25x_udc *udc;
|
|
|
|
udc = container_of(_gadget, struct pxa25x_udc, gadget);
|
|
|
|
if (!IS_ERR_OR_NULL(udc->transceiver))
|
|
return usb_phy_set_power(udc->transceiver, mA);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int pxa25x_start(struct usb_gadget_driver *driver,
|
|
int (*bind)(struct usb_gadget *, struct usb_gadget_driver *));
|
|
static int pxa25x_stop(struct usb_gadget_driver *driver);
|
|
|
|
static const struct usb_gadget_ops pxa25x_udc_ops = {
|
|
.get_frame = pxa25x_udc_get_frame,
|
|
.wakeup = pxa25x_udc_wakeup,
|
|
.vbus_session = pxa25x_udc_vbus_session,
|
|
.pullup = pxa25x_udc_pullup,
|
|
.vbus_draw = pxa25x_udc_vbus_draw,
|
|
.start = pxa25x_start,
|
|
.stop = pxa25x_stop,
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_USB_GADGET_DEBUG_FS
|
|
|
|
static int
|
|
udc_seq_show(struct seq_file *m, void *_d)
|
|
{
|
|
struct pxa25x_udc *dev = m->private;
|
|
unsigned long flags;
|
|
int i;
|
|
u32 tmp;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* basic device status */
|
|
seq_printf(m, DRIVER_DESC "\n"
|
|
"%s version: %s\nGadget driver: %s\nHost %s\n\n",
|
|
driver_name, DRIVER_VERSION SIZE_STR "(pio)",
|
|
dev->driver ? dev->driver->driver.name : "(none)",
|
|
dev->gadget.speed == USB_SPEED_FULL ? "full speed" : "disconnected");
|
|
|
|
/* registers for device and ep0 */
|
|
seq_printf(m,
|
|
"uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
|
|
UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
|
|
|
|
tmp = UDCCR;
|
|
seq_printf(m,
|
|
"udccr %02X =%s%s%s%s%s%s%s%s\n", tmp,
|
|
(tmp & UDCCR_REM) ? " rem" : "",
|
|
(tmp & UDCCR_RSTIR) ? " rstir" : "",
|
|
(tmp & UDCCR_SRM) ? " srm" : "",
|
|
(tmp & UDCCR_SUSIR) ? " susir" : "",
|
|
(tmp & UDCCR_RESIR) ? " resir" : "",
|
|
(tmp & UDCCR_RSM) ? " rsm" : "",
|
|
(tmp & UDCCR_UDA) ? " uda" : "",
|
|
(tmp & UDCCR_UDE) ? " ude" : "");
|
|
|
|
tmp = UDCCS0;
|
|
seq_printf(m,
|
|
"udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp,
|
|
(tmp & UDCCS0_SA) ? " sa" : "",
|
|
(tmp & UDCCS0_RNE) ? " rne" : "",
|
|
(tmp & UDCCS0_FST) ? " fst" : "",
|
|
(tmp & UDCCS0_SST) ? " sst" : "",
|
|
(tmp & UDCCS0_DRWF) ? " dwrf" : "",
|
|
(tmp & UDCCS0_FTF) ? " ftf" : "",
|
|
(tmp & UDCCS0_IPR) ? " ipr" : "",
|
|
(tmp & UDCCS0_OPR) ? " opr" : "");
|
|
|
|
if (dev->has_cfr) {
|
|
tmp = UDCCFR;
|
|
seq_printf(m,
|
|
"udccfr %02X =%s%s\n", tmp,
|
|
(tmp & UDCCFR_AREN) ? " aren" : "",
|
|
(tmp & UDCCFR_ACM) ? " acm" : "");
|
|
}
|
|
|
|
if (dev->gadget.speed != USB_SPEED_FULL || !dev->driver)
|
|
goto done;
|
|
|
|
seq_printf(m, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
|
|
dev->stats.write.bytes, dev->stats.write.ops,
|
|
dev->stats.read.bytes, dev->stats.read.ops,
|
|
dev->stats.irqs);
|
|
|
|
/* dump endpoint queues */
|
|
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
|
|
struct pxa25x_ep *ep = &dev->ep [i];
|
|
struct pxa25x_request *req;
|
|
|
|
if (i != 0) {
|
|
const struct usb_endpoint_descriptor *desc;
|
|
|
|
desc = ep->ep.desc;
|
|
if (!desc)
|
|
continue;
|
|
tmp = *dev->ep [i].reg_udccs;
|
|
seq_printf(m,
|
|
"%s max %d %s udccs %02x irqs %lu\n",
|
|
ep->ep.name, usb_endpoint_maxp(desc),
|
|
"pio", tmp, ep->pio_irqs);
|
|
/* TODO translate all five groups of udccs bits! */
|
|
|
|
} else /* ep0 should only have one transfer queued */
|
|
seq_printf(m, "ep0 max 16 pio irqs %lu\n",
|
|
ep->pio_irqs);
|
|
|
|
if (list_empty(&ep->queue)) {
|
|
seq_printf(m, "\t(nothing queued)\n");
|
|
continue;
|
|
}
|
|
list_for_each_entry(req, &ep->queue, queue) {
|
|
seq_printf(m,
|
|
"\treq %p len %d/%d buf %p\n",
|
|
&req->req, req->req.actual,
|
|
req->req.length, req->req.buf);
|
|
}
|
|
}
|
|
|
|
done:
|
|
local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
udc_debugfs_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, udc_seq_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations debug_fops = {
|
|
.open = udc_debugfs_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
#define create_debug_files(dev) \
|
|
do { \
|
|
dev->debugfs_udc = debugfs_create_file(dev->gadget.name, \
|
|
S_IRUGO, NULL, dev, &debug_fops); \
|
|
} while (0)
|
|
#define remove_debug_files(dev) \
|
|
do { \
|
|
if (dev->debugfs_udc) \
|
|
debugfs_remove(dev->debugfs_udc); \
|
|
} while (0)
|
|
|
|
#else /* !CONFIG_USB_GADGET_DEBUG_FILES */
|
|
|
|
#define create_debug_files(dev) do {} while (0)
|
|
#define remove_debug_files(dev) do {} while (0)
|
|
|
|
#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* udc_disable - disable USB device controller
|
|
*/
|
|
static void udc_disable(struct pxa25x_udc *dev)
|
|
{
|
|
/* block all irqs */
|
|
udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM);
|
|
UICR0 = UICR1 = 0xff;
|
|
UFNRH = UFNRH_SIM;
|
|
|
|
/* if hardware supports it, disconnect from usb */
|
|
pullup_off();
|
|
|
|
udc_clear_mask_UDCCR(UDCCR_UDE);
|
|
|
|
ep0_idle (dev);
|
|
dev->gadget.speed = USB_SPEED_UNKNOWN;
|
|
}
|
|
|
|
|
|
/*
|
|
* udc_reinit - initialize software state
|
|
*/
|
|
static void udc_reinit(struct pxa25x_udc *dev)
|
|
{
|
|
u32 i;
|
|
|
|
/* device/ep0 records init */
|
|
INIT_LIST_HEAD (&dev->gadget.ep_list);
|
|
INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
|
|
dev->ep0state = EP0_IDLE;
|
|
|
|
/* basic endpoint records init */
|
|
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
|
|
struct pxa25x_ep *ep = &dev->ep[i];
|
|
|
|
if (i != 0)
|
|
list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
|
|
|
|
ep->ep.desc = NULL;
|
|
ep->stopped = 0;
|
|
INIT_LIST_HEAD (&ep->queue);
|
|
ep->pio_irqs = 0;
|
|
}
|
|
|
|
/* the rest was statically initialized, and is read-only */
|
|
}
|
|
|
|
/* until it's enabled, this UDC should be completely invisible
|
|
* to any USB host.
|
|
*/
|
|
static void udc_enable (struct pxa25x_udc *dev)
|
|
{
|
|
udc_clear_mask_UDCCR(UDCCR_UDE);
|
|
|
|
/* try to clear these bits before we enable the udc */
|
|
udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
|
|
|
|
ep0_idle(dev);
|
|
dev->gadget.speed = USB_SPEED_UNKNOWN;
|
|
dev->stats.irqs = 0;
|
|
|
|
/*
|
|
* sequence taken from chapter 12.5.10, PXA250 AppProcDevManual:
|
|
* - enable UDC
|
|
* - if RESET is already in progress, ack interrupt
|
|
* - unmask reset interrupt
|
|
*/
|
|
udc_set_mask_UDCCR(UDCCR_UDE);
|
|
if (!(UDCCR & UDCCR_UDA))
|
|
udc_ack_int_UDCCR(UDCCR_RSTIR);
|
|
|
|
if (dev->has_cfr /* UDC_RES2 is defined */) {
|
|
/* pxa255 (a0+) can avoid a set_config race that could
|
|
* prevent gadget drivers from configuring correctly
|
|
*/
|
|
UDCCFR = UDCCFR_ACM | UDCCFR_MB1;
|
|
} else {
|
|
/* "USB test mode" for pxa250 errata 40-42 (stepping a0, a1)
|
|
* which could result in missing packets and interrupts.
|
|
* supposedly one bit per endpoint, controlling whether it
|
|
* double buffers or not; ACM/AREN bits fit into the holes.
|
|
* zero bits (like USIR0_IRx) disable double buffering.
|
|
*/
|
|
UDC_RES1 = 0x00;
|
|
UDC_RES2 = 0x00;
|
|
}
|
|
|
|
/* enable suspend/resume and reset irqs */
|
|
udc_clear_mask_UDCCR(UDCCR_SRM | UDCCR_REM);
|
|
|
|
/* enable ep0 irqs */
|
|
UICR0 &= ~UICR0_IM0;
|
|
|
|
/* if hardware supports it, pullup D+ and wait for reset */
|
|
pullup_on();
|
|
}
|
|
|
|
|
|
/* when a driver is successfully registered, it will receive
|
|
* control requests including set_configuration(), which enables
|
|
* non-control requests. then usb traffic follows until a
|
|
* disconnect is reported. then a host may connect again, or
|
|
* the driver might get unbound.
|
|
*/
|
|
static int pxa25x_start(struct usb_gadget_driver *driver,
|
|
int (*bind)(struct usb_gadget *, struct usb_gadget_driver *))
|
|
{
|
|
struct pxa25x_udc *dev = the_controller;
|
|
int retval;
|
|
|
|
if (!driver
|
|
|| driver->max_speed < USB_SPEED_FULL
|
|
|| !bind
|
|
|| !driver->disconnect
|
|
|| !driver->setup)
|
|
return -EINVAL;
|
|
if (!dev)
|
|
return -ENODEV;
|
|
if (dev->driver)
|
|
return -EBUSY;
|
|
|
|
/* first hook up the driver ... */
|
|
dev->driver = driver;
|
|
dev->gadget.dev.driver = &driver->driver;
|
|
dev->pullup = 1;
|
|
|
|
retval = device_add (&dev->gadget.dev);
|
|
if (retval) {
|
|
fail:
|
|
dev->driver = NULL;
|
|
dev->gadget.dev.driver = NULL;
|
|
return retval;
|
|
}
|
|
retval = bind(&dev->gadget, driver);
|
|
if (retval) {
|
|
DMSG("bind to driver %s --> error %d\n",
|
|
driver->driver.name, retval);
|
|
device_del (&dev->gadget.dev);
|
|
goto fail;
|
|
}
|
|
|
|
/* ... then enable host detection and ep0; and we're ready
|
|
* for set_configuration as well as eventual disconnect.
|
|
*/
|
|
DMSG("registered gadget driver '%s'\n", driver->driver.name);
|
|
|
|
/* connect to bus through transceiver */
|
|
if (!IS_ERR_OR_NULL(dev->transceiver)) {
|
|
retval = otg_set_peripheral(dev->transceiver->otg,
|
|
&dev->gadget);
|
|
if (retval) {
|
|
DMSG("can't bind to transceiver\n");
|
|
if (driver->unbind)
|
|
driver->unbind(&dev->gadget);
|
|
goto bind_fail;
|
|
}
|
|
}
|
|
|
|
pullup(dev);
|
|
dump_state(dev);
|
|
return 0;
|
|
bind_fail:
|
|
return retval;
|
|
}
|
|
|
|
static void
|
|
stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver)
|
|
{
|
|
int i;
|
|
|
|
/* don't disconnect drivers more than once */
|
|
if (dev->gadget.speed == USB_SPEED_UNKNOWN)
|
|
driver = NULL;
|
|
dev->gadget.speed = USB_SPEED_UNKNOWN;
|
|
|
|
/* prevent new request submissions, kill any outstanding requests */
|
|
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
|
|
struct pxa25x_ep *ep = &dev->ep[i];
|
|
|
|
ep->stopped = 1;
|
|
nuke(ep, -ESHUTDOWN);
|
|
}
|
|
del_timer_sync(&dev->timer);
|
|
|
|
/* report disconnect; the driver is already quiesced */
|
|
if (driver)
|
|
driver->disconnect(&dev->gadget);
|
|
|
|
/* re-init driver-visible data structures */
|
|
udc_reinit(dev);
|
|
}
|
|
|
|
static int pxa25x_stop(struct usb_gadget_driver *driver)
|
|
{
|
|
struct pxa25x_udc *dev = the_controller;
|
|
|
|
if (!dev)
|
|
return -ENODEV;
|
|
if (!driver || driver != dev->driver || !driver->unbind)
|
|
return -EINVAL;
|
|
|
|
local_irq_disable();
|
|
dev->pullup = 0;
|
|
pullup(dev);
|
|
stop_activity(dev, driver);
|
|
local_irq_enable();
|
|
|
|
if (!IS_ERR_OR_NULL(dev->transceiver))
|
|
(void) otg_set_peripheral(dev->transceiver->otg, NULL);
|
|
|
|
driver->unbind(&dev->gadget);
|
|
dev->gadget.dev.driver = NULL;
|
|
dev->driver = NULL;
|
|
|
|
device_del (&dev->gadget.dev);
|
|
|
|
DMSG("unregistered gadget driver '%s'\n", driver->driver.name);
|
|
dump_state(dev);
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_ARCH_LUBBOCK
|
|
|
|
/* Lubbock has separate connect and disconnect irqs. More typical designs
|
|
* use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
|
|
*/
|
|
|
|
static irqreturn_t
|
|
lubbock_vbus_irq(int irq, void *_dev)
|
|
{
|
|
struct pxa25x_udc *dev = _dev;
|
|
int vbus;
|
|
|
|
dev->stats.irqs++;
|
|
switch (irq) {
|
|
case LUBBOCK_USB_IRQ:
|
|
vbus = 1;
|
|
disable_irq(LUBBOCK_USB_IRQ);
|
|
enable_irq(LUBBOCK_USB_DISC_IRQ);
|
|
break;
|
|
case LUBBOCK_USB_DISC_IRQ:
|
|
vbus = 0;
|
|
disable_irq(LUBBOCK_USB_DISC_IRQ);
|
|
enable_irq(LUBBOCK_USB_IRQ);
|
|
break;
|
|
default:
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
pxa25x_udc_vbus_session(&dev->gadget, vbus);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static inline void clear_ep_state (struct pxa25x_udc *dev)
|
|
{
|
|
unsigned i;
|
|
|
|
/* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint
|
|
* fifos, and pending transactions mustn't be continued in any case.
|
|
*/
|
|
for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++)
|
|
nuke(&dev->ep[i], -ECONNABORTED);
|
|
}
|
|
|
|
static void udc_watchdog(unsigned long _dev)
|
|
{
|
|
struct pxa25x_udc *dev = (void *)_dev;
|
|
|
|
local_irq_disable();
|
|
if (dev->ep0state == EP0_STALL
|
|
&& (UDCCS0 & UDCCS0_FST) == 0
|
|
&& (UDCCS0 & UDCCS0_SST) == 0) {
|
|
UDCCS0 = UDCCS0_FST|UDCCS0_FTF;
|
|
DBG(DBG_VERBOSE, "ep0 re-stall\n");
|
|
start_watchdog(dev);
|
|
}
|
|
local_irq_enable();
|
|
}
|
|
|
|
static void handle_ep0 (struct pxa25x_udc *dev)
|
|
{
|
|
u32 udccs0 = UDCCS0;
|
|
struct pxa25x_ep *ep = &dev->ep [0];
|
|
struct pxa25x_request *req;
|
|
union {
|
|
struct usb_ctrlrequest r;
|
|
u8 raw [8];
|
|
u32 word [2];
|
|
} u;
|
|
|
|
if (list_empty(&ep->queue))
|
|
req = NULL;
|
|
else
|
|
req = list_entry(ep->queue.next, struct pxa25x_request, queue);
|
|
|
|
/* clear stall status */
|
|
if (udccs0 & UDCCS0_SST) {
|
|
nuke(ep, -EPIPE);
|
|
UDCCS0 = UDCCS0_SST;
|
|
del_timer(&dev->timer);
|
|
ep0_idle(dev);
|
|
}
|
|
|
|
/* previous request unfinished? non-error iff back-to-back ... */
|
|
if ((udccs0 & UDCCS0_SA) != 0 && dev->ep0state != EP0_IDLE) {
|
|
nuke(ep, 0);
|
|
del_timer(&dev->timer);
|
|
ep0_idle(dev);
|
|
}
|
|
|
|
switch (dev->ep0state) {
|
|
case EP0_IDLE:
|
|
/* late-breaking status? */
|
|
udccs0 = UDCCS0;
|
|
|
|
/* start control request? */
|
|
if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))
|
|
== (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))) {
|
|
int i;
|
|
|
|
nuke (ep, -EPROTO);
|
|
|
|
/* read SETUP packet */
|
|
for (i = 0; i < 8; i++) {
|
|
if (unlikely(!(UDCCS0 & UDCCS0_RNE))) {
|
|
bad_setup:
|
|
DMSG("SETUP %d!\n", i);
|
|
goto stall;
|
|
}
|
|
u.raw [i] = (u8) UDDR0;
|
|
}
|
|
if (unlikely((UDCCS0 & UDCCS0_RNE) != 0))
|
|
goto bad_setup;
|
|
|
|
got_setup:
|
|
DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n",
|
|
u.r.bRequestType, u.r.bRequest,
|
|
le16_to_cpu(u.r.wValue),
|
|
le16_to_cpu(u.r.wIndex),
|
|
le16_to_cpu(u.r.wLength));
|
|
|
|
/* cope with automagic for some standard requests. */
|
|
dev->req_std = (u.r.bRequestType & USB_TYPE_MASK)
|
|
== USB_TYPE_STANDARD;
|
|
dev->req_config = 0;
|
|
dev->req_pending = 1;
|
|
switch (u.r.bRequest) {
|
|
/* hardware restricts gadget drivers here! */
|
|
case USB_REQ_SET_CONFIGURATION:
|
|
if (u.r.bRequestType == USB_RECIP_DEVICE) {
|
|
/* reflect hardware's automagic
|
|
* up to the gadget driver.
|
|
*/
|
|
config_change:
|
|
dev->req_config = 1;
|
|
clear_ep_state(dev);
|
|
/* if !has_cfr, there's no synch
|
|
* else use AREN (later) not SA|OPR
|
|
* USIR0_IR0 acts edge sensitive
|
|
*/
|
|
}
|
|
break;
|
|
/* ... and here, even more ... */
|
|
case USB_REQ_SET_INTERFACE:
|
|
if (u.r.bRequestType == USB_RECIP_INTERFACE) {
|
|
/* udc hardware is broken by design:
|
|
* - altsetting may only be zero;
|
|
* - hw resets all interfaces' eps;
|
|
* - ep reset doesn't include halt(?).
|
|
*/
|
|
DMSG("broken set_interface (%d/%d)\n",
|
|
le16_to_cpu(u.r.wIndex),
|
|
le16_to_cpu(u.r.wValue));
|
|
goto config_change;
|
|
}
|
|
break;
|
|
/* hardware was supposed to hide this */
|
|
case USB_REQ_SET_ADDRESS:
|
|
if (u.r.bRequestType == USB_RECIP_DEVICE) {
|
|
ep0start(dev, 0, "address");
|
|
return;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (u.r.bRequestType & USB_DIR_IN)
|
|
dev->ep0state = EP0_IN_DATA_PHASE;
|
|
else
|
|
dev->ep0state = EP0_OUT_DATA_PHASE;
|
|
|
|
i = dev->driver->setup(&dev->gadget, &u.r);
|
|
if (i < 0) {
|
|
/* hardware automagic preventing STALL... */
|
|
if (dev->req_config) {
|
|
/* hardware sometimes neglects to tell
|
|
* tell us about config change events,
|
|
* so later ones may fail...
|
|
*/
|
|
WARNING("config change %02x fail %d?\n",
|
|
u.r.bRequest, i);
|
|
return;
|
|
/* TODO experiment: if has_cfr,
|
|
* hardware didn't ACK; maybe we
|
|
* could actually STALL!
|
|
*/
|
|
}
|
|
DBG(DBG_VERBOSE, "protocol STALL, "
|
|
"%02x err %d\n", UDCCS0, i);
|
|
stall:
|
|
/* the watchdog timer helps deal with cases
|
|
* where udc seems to clear FST wrongly, and
|
|
* then NAKs instead of STALLing.
|
|
*/
|
|
ep0start(dev, UDCCS0_FST|UDCCS0_FTF, "stall");
|
|
start_watchdog(dev);
|
|
dev->ep0state = EP0_STALL;
|
|
|
|
/* deferred i/o == no response yet */
|
|
} else if (dev->req_pending) {
|
|
if (likely(dev->ep0state == EP0_IN_DATA_PHASE
|
|
|| dev->req_std || u.r.wLength))
|
|
ep0start(dev, 0, "defer");
|
|
else
|
|
ep0start(dev, UDCCS0_IPR, "defer/IPR");
|
|
}
|
|
|
|
/* expect at least one data or status stage irq */
|
|
return;
|
|
|
|
} else if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA))
|
|
== (UDCCS0_OPR|UDCCS0_SA))) {
|
|
unsigned i;
|
|
|
|
/* pxa210/250 erratum 131 for B0/B1 says RNE lies.
|
|
* still observed on a pxa255 a0.
|
|
*/
|
|
DBG(DBG_VERBOSE, "e131\n");
|
|
nuke(ep, -EPROTO);
|
|
|
|
/* read SETUP data, but don't trust it too much */
|
|
for (i = 0; i < 8; i++)
|
|
u.raw [i] = (u8) UDDR0;
|
|
if ((u.r.bRequestType & USB_RECIP_MASK)
|
|
> USB_RECIP_OTHER)
|
|
goto stall;
|
|
if (u.word [0] == 0 && u.word [1] == 0)
|
|
goto stall;
|
|
goto got_setup;
|
|
} else {
|
|
/* some random early IRQ:
|
|
* - we acked FST
|
|
* - IPR cleared
|
|
* - OPR got set, without SA (likely status stage)
|
|
*/
|
|
UDCCS0 = udccs0 & (UDCCS0_SA|UDCCS0_OPR);
|
|
}
|
|
break;
|
|
case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */
|
|
if (udccs0 & UDCCS0_OPR) {
|
|
UDCCS0 = UDCCS0_OPR|UDCCS0_FTF;
|
|
DBG(DBG_VERBOSE, "ep0in premature status\n");
|
|
if (req)
|
|
done(ep, req, 0);
|
|
ep0_idle(dev);
|
|
} else /* irq was IPR clearing */ {
|
|
if (req) {
|
|
/* this IN packet might finish the request */
|
|
(void) write_ep0_fifo(ep, req);
|
|
} /* else IN token before response was written */
|
|
}
|
|
break;
|
|
case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */
|
|
if (udccs0 & UDCCS0_OPR) {
|
|
if (req) {
|
|
/* this OUT packet might finish the request */
|
|
if (read_ep0_fifo(ep, req))
|
|
done(ep, req, 0);
|
|
/* else more OUT packets expected */
|
|
} /* else OUT token before read was issued */
|
|
} else /* irq was IPR clearing */ {
|
|
DBG(DBG_VERBOSE, "ep0out premature status\n");
|
|
if (req)
|
|
done(ep, req, 0);
|
|
ep0_idle(dev);
|
|
}
|
|
break;
|
|
case EP0_END_XFER:
|
|
if (req)
|
|
done(ep, req, 0);
|
|
/* ack control-IN status (maybe in-zlp was skipped)
|
|
* also appears after some config change events.
|
|
*/
|
|
if (udccs0 & UDCCS0_OPR)
|
|
UDCCS0 = UDCCS0_OPR;
|
|
ep0_idle(dev);
|
|
break;
|
|
case EP0_STALL:
|
|
UDCCS0 = UDCCS0_FST;
|
|
break;
|
|
}
|
|
USIR0 = USIR0_IR0;
|
|
}
|
|
|
|
static void handle_ep(struct pxa25x_ep *ep)
|
|
{
|
|
struct pxa25x_request *req;
|
|
int is_in = ep->bEndpointAddress & USB_DIR_IN;
|
|
int completed;
|
|
u32 udccs, tmp;
|
|
|
|
do {
|
|
completed = 0;
|
|
if (likely (!list_empty(&ep->queue)))
|
|
req = list_entry(ep->queue.next,
|
|
struct pxa25x_request, queue);
|
|
else
|
|
req = NULL;
|
|
|
|
// TODO check FST handling
|
|
|
|
udccs = *ep->reg_udccs;
|
|
if (unlikely(is_in)) { /* irq from TPC, SST, or (ISO) TUR */
|
|
tmp = UDCCS_BI_TUR;
|
|
if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
|
|
tmp |= UDCCS_BI_SST;
|
|
tmp &= udccs;
|
|
if (likely (tmp))
|
|
*ep->reg_udccs = tmp;
|
|
if (req && likely ((udccs & UDCCS_BI_TFS) != 0))
|
|
completed = write_fifo(ep, req);
|
|
|
|
} else { /* irq from RPC (or for ISO, ROF) */
|
|
if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
|
|
tmp = UDCCS_BO_SST | UDCCS_BO_DME;
|
|
else
|
|
tmp = UDCCS_IO_ROF | UDCCS_IO_DME;
|
|
tmp &= udccs;
|
|
if (likely(tmp))
|
|
*ep->reg_udccs = tmp;
|
|
|
|
/* fifos can hold packets, ready for reading... */
|
|
if (likely(req)) {
|
|
completed = read_fifo(ep, req);
|
|
} else
|
|
pio_irq_disable (ep->bEndpointAddress);
|
|
}
|
|
ep->pio_irqs++;
|
|
} while (completed);
|
|
}
|
|
|
|
/*
|
|
* pxa25x_udc_irq - interrupt handler
|
|
*
|
|
* avoid delays in ep0 processing. the control handshaking isn't always
|
|
* under software control (pxa250c0 and the pxa255 are better), and delays
|
|
* could cause usb protocol errors.
|
|
*/
|
|
static irqreturn_t
|
|
pxa25x_udc_irq(int irq, void *_dev)
|
|
{
|
|
struct pxa25x_udc *dev = _dev;
|
|
int handled;
|
|
|
|
dev->stats.irqs++;
|
|
do {
|
|
u32 udccr = UDCCR;
|
|
|
|
handled = 0;
|
|
|
|
/* SUSpend Interrupt Request */
|
|
if (unlikely(udccr & UDCCR_SUSIR)) {
|
|
udc_ack_int_UDCCR(UDCCR_SUSIR);
|
|
handled = 1;
|
|
DBG(DBG_VERBOSE, "USB suspend\n");
|
|
|
|
if (dev->gadget.speed != USB_SPEED_UNKNOWN
|
|
&& dev->driver
|
|
&& dev->driver->suspend)
|
|
dev->driver->suspend(&dev->gadget);
|
|
ep0_idle (dev);
|
|
}
|
|
|
|
/* RESume Interrupt Request */
|
|
if (unlikely(udccr & UDCCR_RESIR)) {
|
|
udc_ack_int_UDCCR(UDCCR_RESIR);
|
|
handled = 1;
|
|
DBG(DBG_VERBOSE, "USB resume\n");
|
|
|
|
if (dev->gadget.speed != USB_SPEED_UNKNOWN
|
|
&& dev->driver
|
|
&& dev->driver->resume)
|
|
dev->driver->resume(&dev->gadget);
|
|
}
|
|
|
|
/* ReSeT Interrupt Request - USB reset */
|
|
if (unlikely(udccr & UDCCR_RSTIR)) {
|
|
udc_ack_int_UDCCR(UDCCR_RSTIR);
|
|
handled = 1;
|
|
|
|
if ((UDCCR & UDCCR_UDA) == 0) {
|
|
DBG(DBG_VERBOSE, "USB reset start\n");
|
|
|
|
/* reset driver and endpoints,
|
|
* in case that's not yet done
|
|
*/
|
|
stop_activity (dev, dev->driver);
|
|
|
|
} else {
|
|
DBG(DBG_VERBOSE, "USB reset end\n");
|
|
dev->gadget.speed = USB_SPEED_FULL;
|
|
memset(&dev->stats, 0, sizeof dev->stats);
|
|
/* driver and endpoints are still reset */
|
|
}
|
|
|
|
} else {
|
|
u32 usir0 = USIR0 & ~UICR0;
|
|
u32 usir1 = USIR1 & ~UICR1;
|
|
int i;
|
|
|
|
if (unlikely (!usir0 && !usir1))
|
|
continue;
|
|
|
|
DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", usir1, usir0);
|
|
|
|
/* control traffic */
|
|
if (usir0 & USIR0_IR0) {
|
|
dev->ep[0].pio_irqs++;
|
|
handle_ep0(dev);
|
|
handled = 1;
|
|
}
|
|
|
|
/* endpoint data transfers */
|
|
for (i = 0; i < 8; i++) {
|
|
u32 tmp = 1 << i;
|
|
|
|
if (i && (usir0 & tmp)) {
|
|
handle_ep(&dev->ep[i]);
|
|
USIR0 |= tmp;
|
|
handled = 1;
|
|
}
|
|
#ifndef CONFIG_USB_PXA25X_SMALL
|
|
if (usir1 & tmp) {
|
|
handle_ep(&dev->ep[i+8]);
|
|
USIR1 |= tmp;
|
|
handled = 1;
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/* we could also ask for 1 msec SOF (SIR) interrupts */
|
|
|
|
} while (handled);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void nop_release (struct device *dev)
|
|
{
|
|
DMSG("%s %s\n", __func__, dev_name(dev));
|
|
}
|
|
|
|
/* this uses load-time allocation and initialization (instead of
|
|
* doing it at run-time) to save code, eliminate fault paths, and
|
|
* be more obviously correct.
|
|
*/
|
|
static struct pxa25x_udc memory = {
|
|
.gadget = {
|
|
.ops = &pxa25x_udc_ops,
|
|
.ep0 = &memory.ep[0].ep,
|
|
.name = driver_name,
|
|
.dev = {
|
|
.init_name = "gadget",
|
|
.release = nop_release,
|
|
},
|
|
},
|
|
|
|
/* control endpoint */
|
|
.ep[0] = {
|
|
.ep = {
|
|
.name = ep0name,
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = EP0_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.reg_udccs = &UDCCS0,
|
|
.reg_uddr = &UDDR0,
|
|
},
|
|
|
|
/* first group of endpoints */
|
|
.ep[1] = {
|
|
.ep = {
|
|
.name = "ep1in-bulk",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = BULK_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = BULK_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 1,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.reg_udccs = &UDCCS1,
|
|
.reg_uddr = &UDDR1,
|
|
},
|
|
.ep[2] = {
|
|
.ep = {
|
|
.name = "ep2out-bulk",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = BULK_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = BULK_FIFO_SIZE,
|
|
.bEndpointAddress = 2,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.reg_udccs = &UDCCS2,
|
|
.reg_ubcr = &UBCR2,
|
|
.reg_uddr = &UDDR2,
|
|
},
|
|
#ifndef CONFIG_USB_PXA25X_SMALL
|
|
.ep[3] = {
|
|
.ep = {
|
|
.name = "ep3in-iso",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = ISO_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = ISO_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 3,
|
|
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
|
|
.reg_udccs = &UDCCS3,
|
|
.reg_uddr = &UDDR3,
|
|
},
|
|
.ep[4] = {
|
|
.ep = {
|
|
.name = "ep4out-iso",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = ISO_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = ISO_FIFO_SIZE,
|
|
.bEndpointAddress = 4,
|
|
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
|
|
.reg_udccs = &UDCCS4,
|
|
.reg_ubcr = &UBCR4,
|
|
.reg_uddr = &UDDR4,
|
|
},
|
|
.ep[5] = {
|
|
.ep = {
|
|
.name = "ep5in-int",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = INT_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = INT_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 5,
|
|
.bmAttributes = USB_ENDPOINT_XFER_INT,
|
|
.reg_udccs = &UDCCS5,
|
|
.reg_uddr = &UDDR5,
|
|
},
|
|
|
|
/* second group of endpoints */
|
|
.ep[6] = {
|
|
.ep = {
|
|
.name = "ep6in-bulk",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = BULK_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = BULK_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 6,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.reg_udccs = &UDCCS6,
|
|
.reg_uddr = &UDDR6,
|
|
},
|
|
.ep[7] = {
|
|
.ep = {
|
|
.name = "ep7out-bulk",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = BULK_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = BULK_FIFO_SIZE,
|
|
.bEndpointAddress = 7,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.reg_udccs = &UDCCS7,
|
|
.reg_ubcr = &UBCR7,
|
|
.reg_uddr = &UDDR7,
|
|
},
|
|
.ep[8] = {
|
|
.ep = {
|
|
.name = "ep8in-iso",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = ISO_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = ISO_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 8,
|
|
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
|
|
.reg_udccs = &UDCCS8,
|
|
.reg_uddr = &UDDR8,
|
|
},
|
|
.ep[9] = {
|
|
.ep = {
|
|
.name = "ep9out-iso",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = ISO_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = ISO_FIFO_SIZE,
|
|
.bEndpointAddress = 9,
|
|
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
|
|
.reg_udccs = &UDCCS9,
|
|
.reg_ubcr = &UBCR9,
|
|
.reg_uddr = &UDDR9,
|
|
},
|
|
.ep[10] = {
|
|
.ep = {
|
|
.name = "ep10in-int",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = INT_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = INT_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 10,
|
|
.bmAttributes = USB_ENDPOINT_XFER_INT,
|
|
.reg_udccs = &UDCCS10,
|
|
.reg_uddr = &UDDR10,
|
|
},
|
|
|
|
/* third group of endpoints */
|
|
.ep[11] = {
|
|
.ep = {
|
|
.name = "ep11in-bulk",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = BULK_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = BULK_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 11,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.reg_udccs = &UDCCS11,
|
|
.reg_uddr = &UDDR11,
|
|
},
|
|
.ep[12] = {
|
|
.ep = {
|
|
.name = "ep12out-bulk",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = BULK_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = BULK_FIFO_SIZE,
|
|
.bEndpointAddress = 12,
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
.reg_udccs = &UDCCS12,
|
|
.reg_ubcr = &UBCR12,
|
|
.reg_uddr = &UDDR12,
|
|
},
|
|
.ep[13] = {
|
|
.ep = {
|
|
.name = "ep13in-iso",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = ISO_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = ISO_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 13,
|
|
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
|
|
.reg_udccs = &UDCCS13,
|
|
.reg_uddr = &UDDR13,
|
|
},
|
|
.ep[14] = {
|
|
.ep = {
|
|
.name = "ep14out-iso",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = ISO_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = ISO_FIFO_SIZE,
|
|
.bEndpointAddress = 14,
|
|
.bmAttributes = USB_ENDPOINT_XFER_ISOC,
|
|
.reg_udccs = &UDCCS14,
|
|
.reg_ubcr = &UBCR14,
|
|
.reg_uddr = &UDDR14,
|
|
},
|
|
.ep[15] = {
|
|
.ep = {
|
|
.name = "ep15in-int",
|
|
.ops = &pxa25x_ep_ops,
|
|
.maxpacket = INT_FIFO_SIZE,
|
|
},
|
|
.dev = &memory,
|
|
.fifo_size = INT_FIFO_SIZE,
|
|
.bEndpointAddress = USB_DIR_IN | 15,
|
|
.bmAttributes = USB_ENDPOINT_XFER_INT,
|
|
.reg_udccs = &UDCCS15,
|
|
.reg_uddr = &UDDR15,
|
|
},
|
|
#endif /* !CONFIG_USB_PXA25X_SMALL */
|
|
};
|
|
|
|
#define CP15R0_VENDOR_MASK 0xffffe000
|
|
|
|
#if defined(CONFIG_ARCH_PXA)
|
|
#define CP15R0_XSCALE_VALUE 0x69052000 /* intel/arm/xscale */
|
|
|
|
#elif defined(CONFIG_ARCH_IXP4XX)
|
|
#define CP15R0_XSCALE_VALUE 0x69054000 /* intel/arm/ixp4xx */
|
|
|
|
#endif
|
|
|
|
#define CP15R0_PROD_MASK 0x000003f0
|
|
#define PXA25x 0x00000100 /* and PXA26x */
|
|
#define PXA210 0x00000120
|
|
|
|
#define CP15R0_REV_MASK 0x0000000f
|
|
|
|
#define CP15R0_PRODREV_MASK (CP15R0_PROD_MASK | CP15R0_REV_MASK)
|
|
|
|
#define PXA255_A0 0x00000106 /* or PXA260_B1 */
|
|
#define PXA250_C0 0x00000105 /* or PXA26x_B0 */
|
|
#define PXA250_B2 0x00000104
|
|
#define PXA250_B1 0x00000103 /* or PXA260_A0 */
|
|
#define PXA250_B0 0x00000102
|
|
#define PXA250_A1 0x00000101
|
|
#define PXA250_A0 0x00000100
|
|
|
|
#define PXA210_C0 0x00000125
|
|
#define PXA210_B2 0x00000124
|
|
#define PXA210_B1 0x00000123
|
|
#define PXA210_B0 0x00000122
|
|
#define IXP425_A0 0x000001c1
|
|
#define IXP425_B0 0x000001f1
|
|
#define IXP465_AD 0x00000200
|
|
|
|
/*
|
|
* probe - binds to the platform device
|
|
*/
|
|
static int __init pxa25x_udc_probe(struct platform_device *pdev)
|
|
{
|
|
struct pxa25x_udc *dev = &memory;
|
|
int retval, irq;
|
|
u32 chiprev;
|
|
|
|
/* insist on Intel/ARM/XScale */
|
|
asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev));
|
|
if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) {
|
|
pr_err("%s: not XScale!\n", driver_name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* trigger chiprev-specific logic */
|
|
switch (chiprev & CP15R0_PRODREV_MASK) {
|
|
#if defined(CONFIG_ARCH_PXA)
|
|
case PXA255_A0:
|
|
dev->has_cfr = 1;
|
|
break;
|
|
case PXA250_A0:
|
|
case PXA250_A1:
|
|
/* A0/A1 "not released"; ep 13, 15 unusable */
|
|
/* fall through */
|
|
case PXA250_B2: case PXA210_B2:
|
|
case PXA250_B1: case PXA210_B1:
|
|
case PXA250_B0: case PXA210_B0:
|
|
/* OUT-DMA is broken ... */
|
|
/* fall through */
|
|
case PXA250_C0: case PXA210_C0:
|
|
break;
|
|
#elif defined(CONFIG_ARCH_IXP4XX)
|
|
case IXP425_A0:
|
|
case IXP425_B0:
|
|
case IXP465_AD:
|
|
dev->has_cfr = 1;
|
|
break;
|
|
#endif
|
|
default:
|
|
pr_err("%s: unrecognized processor: %08x\n",
|
|
driver_name, chiprev);
|
|
/* iop3xx, ixp4xx, ... */
|
|
return -ENODEV;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return -ENODEV;
|
|
|
|
dev->clk = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(dev->clk)) {
|
|
retval = PTR_ERR(dev->clk);
|
|
goto err_clk;
|
|
}
|
|
|
|
pr_debug("%s: IRQ %d%s%s\n", driver_name, irq,
|
|
dev->has_cfr ? "" : " (!cfr)",
|
|
SIZE_STR "(pio)"
|
|
);
|
|
|
|
/* other non-static parts of init */
|
|
dev->dev = &pdev->dev;
|
|
dev->mach = pdev->dev.platform_data;
|
|
|
|
dev->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
|
|
|
|
if (gpio_is_valid(dev->mach->gpio_pullup)) {
|
|
if ((retval = gpio_request(dev->mach->gpio_pullup,
|
|
"pca25x_udc GPIO PULLUP"))) {
|
|
dev_dbg(&pdev->dev,
|
|
"can't get pullup gpio %d, err: %d\n",
|
|
dev->mach->gpio_pullup, retval);
|
|
goto err_gpio_pullup;
|
|
}
|
|
gpio_direction_output(dev->mach->gpio_pullup, 0);
|
|
}
|
|
|
|
init_timer(&dev->timer);
|
|
dev->timer.function = udc_watchdog;
|
|
dev->timer.data = (unsigned long) dev;
|
|
|
|
device_initialize(&dev->gadget.dev);
|
|
dev->gadget.dev.parent = &pdev->dev;
|
|
dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
|
|
|
|
the_controller = dev;
|
|
platform_set_drvdata(pdev, dev);
|
|
|
|
udc_disable(dev);
|
|
udc_reinit(dev);
|
|
|
|
dev->vbus = 0;
|
|
|
|
/* irq setup after old hardware state is cleaned up */
|
|
retval = request_irq(irq, pxa25x_udc_irq,
|
|
0, driver_name, dev);
|
|
if (retval != 0) {
|
|
pr_err("%s: can't get irq %d, err %d\n",
|
|
driver_name, irq, retval);
|
|
goto err_irq1;
|
|
}
|
|
dev->got_irq = 1;
|
|
|
|
#ifdef CONFIG_ARCH_LUBBOCK
|
|
if (machine_is_lubbock()) {
|
|
retval = request_irq(LUBBOCK_USB_DISC_IRQ, lubbock_vbus_irq,
|
|
0, driver_name, dev);
|
|
if (retval != 0) {
|
|
pr_err("%s: can't get irq %i, err %d\n",
|
|
driver_name, LUBBOCK_USB_DISC_IRQ, retval);
|
|
goto err_irq_lub;
|
|
}
|
|
retval = request_irq(LUBBOCK_USB_IRQ, lubbock_vbus_irq,
|
|
0, driver_name, dev);
|
|
if (retval != 0) {
|
|
pr_err("%s: can't get irq %i, err %d\n",
|
|
driver_name, LUBBOCK_USB_IRQ, retval);
|
|
goto lubbock_fail0;
|
|
}
|
|
} else
|
|
#endif
|
|
create_debug_files(dev);
|
|
|
|
retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
|
|
if (!retval)
|
|
return retval;
|
|
|
|
remove_debug_files(dev);
|
|
#ifdef CONFIG_ARCH_LUBBOCK
|
|
lubbock_fail0:
|
|
free_irq(LUBBOCK_USB_DISC_IRQ, dev);
|
|
err_irq_lub:
|
|
free_irq(irq, dev);
|
|
#endif
|
|
err_irq1:
|
|
if (gpio_is_valid(dev->mach->gpio_pullup))
|
|
gpio_free(dev->mach->gpio_pullup);
|
|
err_gpio_pullup:
|
|
if (!IS_ERR_OR_NULL(dev->transceiver)) {
|
|
usb_put_phy(dev->transceiver);
|
|
dev->transceiver = NULL;
|
|
}
|
|
clk_put(dev->clk);
|
|
err_clk:
|
|
return retval;
|
|
}
|
|
|
|
static void pxa25x_udc_shutdown(struct platform_device *_dev)
|
|
{
|
|
pullup_off();
|
|
}
|
|
|
|
static int __exit pxa25x_udc_remove(struct platform_device *pdev)
|
|
{
|
|
struct pxa25x_udc *dev = platform_get_drvdata(pdev);
|
|
|
|
usb_del_gadget_udc(&dev->gadget);
|
|
if (dev->driver)
|
|
return -EBUSY;
|
|
|
|
dev->pullup = 0;
|
|
pullup(dev);
|
|
|
|
remove_debug_files(dev);
|
|
|
|
if (dev->got_irq) {
|
|
free_irq(platform_get_irq(pdev, 0), dev);
|
|
dev->got_irq = 0;
|
|
}
|
|
#ifdef CONFIG_ARCH_LUBBOCK
|
|
if (machine_is_lubbock()) {
|
|
free_irq(LUBBOCK_USB_DISC_IRQ, dev);
|
|
free_irq(LUBBOCK_USB_IRQ, dev);
|
|
}
|
|
#endif
|
|
if (gpio_is_valid(dev->mach->gpio_pullup))
|
|
gpio_free(dev->mach->gpio_pullup);
|
|
|
|
clk_put(dev->clk);
|
|
|
|
if (!IS_ERR_OR_NULL(dev->transceiver)) {
|
|
usb_put_phy(dev->transceiver);
|
|
dev->transceiver = NULL;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
the_controller = NULL;
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/* USB suspend (controlled by the host) and system suspend (controlled
|
|
* by the PXA) don't necessarily work well together. If USB is active,
|
|
* the 48 MHz clock is required; so the system can't enter 33 MHz idle
|
|
* mode, or any deeper PM saving state.
|
|
*
|
|
* For now, we punt and forcibly disconnect from the USB host when PXA
|
|
* enters any suspend state. While we're disconnected, we always disable
|
|
* the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states.
|
|
* Boards without software pullup control shouldn't use those states.
|
|
* VBUS IRQs should probably be ignored so that the PXA device just acts
|
|
* "dead" to USB hosts until system resume.
|
|
*/
|
|
static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state)
|
|
{
|
|
struct pxa25x_udc *udc = platform_get_drvdata(dev);
|
|
unsigned long flags;
|
|
|
|
if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
|
|
WARNING("USB host won't detect disconnect!\n");
|
|
udc->suspended = 1;
|
|
|
|
local_irq_save(flags);
|
|
pullup(udc);
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa25x_udc_resume(struct platform_device *dev)
|
|
{
|
|
struct pxa25x_udc *udc = platform_get_drvdata(dev);
|
|
unsigned long flags;
|
|
|
|
udc->suspended = 0;
|
|
local_irq_save(flags);
|
|
pullup(udc);
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define pxa25x_udc_suspend NULL
|
|
#define pxa25x_udc_resume NULL
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static struct platform_driver udc_driver = {
|
|
.shutdown = pxa25x_udc_shutdown,
|
|
.remove = __exit_p(pxa25x_udc_remove),
|
|
.suspend = pxa25x_udc_suspend,
|
|
.resume = pxa25x_udc_resume,
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "pxa25x-udc",
|
|
},
|
|
};
|
|
|
|
static int __init udc_init(void)
|
|
{
|
|
pr_info("%s: version %s\n", driver_name, DRIVER_VERSION);
|
|
return platform_driver_probe(&udc_driver, pxa25x_udc_probe);
|
|
}
|
|
module_init(udc_init);
|
|
|
|
static void __exit udc_exit(void)
|
|
{
|
|
platform_driver_unregister(&udc_driver);
|
|
}
|
|
module_exit(udc_exit);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:pxa25x-udc");
|