![Jacek Anaszewski](/assets/img/avatar_default.png)
Switch to using generic LED support for composing LED class device name. Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Simon Shields <simon@lineageos.org> Acked-by: Pavel Machek <pavel@ucw.cz>
370 lines
8.6 KiB
C
370 lines
8.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// Driver for Panasonic AN30259A 3-channel LED driver
|
|
//
|
|
// Copyright (c) 2018 Simon Shields <simon@lineageos.org>
|
|
//
|
|
// Datasheet:
|
|
// https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define AN30259A_MAX_LEDS 3
|
|
|
|
#define AN30259A_REG_SRESET 0x00
|
|
#define AN30259A_LED_SRESET BIT(0)
|
|
|
|
/* LED power registers */
|
|
#define AN30259A_REG_LED_ON 0x01
|
|
#define AN30259A_LED_EN(x) BIT((x) - 1)
|
|
#define AN30259A_LED_SLOPE(x) BIT(((x) - 1) + 4)
|
|
|
|
#define AN30259A_REG_LEDCC(x) (0x03 + ((x) - 1))
|
|
|
|
/* slope control registers */
|
|
#define AN30259A_REG_SLOPE(x) (0x06 + ((x) - 1))
|
|
#define AN30259A_LED_SLOPETIME1(x) (x)
|
|
#define AN30259A_LED_SLOPETIME2(x) ((x) << 4)
|
|
|
|
#define AN30259A_REG_LEDCNT1(x) (0x09 + (4 * ((x) - 1)))
|
|
#define AN30259A_LED_DUTYMAX(x) ((x) << 4)
|
|
#define AN30259A_LED_DUTYMID(x) (x)
|
|
|
|
#define AN30259A_REG_LEDCNT2(x) (0x0A + (4 * ((x) - 1)))
|
|
#define AN30259A_LED_DELAY(x) ((x) << 4)
|
|
#define AN30259A_LED_DUTYMIN(x) (x)
|
|
|
|
/* detention time control (length of each slope step) */
|
|
#define AN30259A_REG_LEDCNT3(x) (0x0B + (4 * ((x) - 1)))
|
|
#define AN30259A_LED_DT1(x) (x)
|
|
#define AN30259A_LED_DT2(x) ((x) << 4)
|
|
|
|
#define AN30259A_REG_LEDCNT4(x) (0x0C + (4 * ((x) - 1)))
|
|
#define AN30259A_LED_DT3(x) (x)
|
|
#define AN30259A_LED_DT4(x) ((x) << 4)
|
|
|
|
#define AN30259A_REG_MAX 0x14
|
|
|
|
#define AN30259A_BLINK_MAX_TIME 7500 /* ms */
|
|
#define AN30259A_SLOPE_RESOLUTION 500 /* ms */
|
|
|
|
#define AN30259A_NAME "an30259a"
|
|
|
|
#define STATE_OFF 0
|
|
#define STATE_KEEP 1
|
|
#define STATE_ON 2
|
|
|
|
struct an30259a;
|
|
|
|
struct an30259a_led {
|
|
struct an30259a *chip;
|
|
struct fwnode_handle *fwnode;
|
|
struct led_classdev cdev;
|
|
u32 num;
|
|
u32 default_state;
|
|
bool sloping;
|
|
};
|
|
|
|
struct an30259a {
|
|
struct mutex mutex; /* held when writing to registers */
|
|
struct i2c_client *client;
|
|
struct an30259a_led leds[AN30259A_MAX_LEDS];
|
|
struct regmap *regmap;
|
|
int num_leds;
|
|
};
|
|
|
|
static int an30259a_brightness_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct an30259a_led *led;
|
|
int ret;
|
|
unsigned int led_on;
|
|
|
|
led = container_of(cdev, struct an30259a_led, cdev);
|
|
mutex_lock(&led->chip->mutex);
|
|
|
|
ret = regmap_read(led->chip->regmap, AN30259A_REG_LED_ON, &led_on);
|
|
if (ret)
|
|
goto error;
|
|
|
|
switch (brightness) {
|
|
case LED_OFF:
|
|
led_on &= ~AN30259A_LED_EN(led->num);
|
|
led_on &= ~AN30259A_LED_SLOPE(led->num);
|
|
led->sloping = false;
|
|
break;
|
|
default:
|
|
led_on |= AN30259A_LED_EN(led->num);
|
|
if (led->sloping)
|
|
led_on |= AN30259A_LED_SLOPE(led->num);
|
|
ret = regmap_write(led->chip->regmap,
|
|
AN30259A_REG_LEDCNT1(led->num),
|
|
AN30259A_LED_DUTYMAX(0xf) |
|
|
AN30259A_LED_DUTYMID(0xf));
|
|
if (ret)
|
|
goto error;
|
|
break;
|
|
}
|
|
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_LED_ON, led_on);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCC(led->num),
|
|
brightness);
|
|
|
|
error:
|
|
mutex_unlock(&led->chip->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int an30259a_blink_set(struct led_classdev *cdev,
|
|
unsigned long *delay_off, unsigned long *delay_on)
|
|
{
|
|
struct an30259a_led *led;
|
|
int ret, num;
|
|
unsigned int led_on;
|
|
unsigned long off = *delay_off, on = *delay_on;
|
|
|
|
led = container_of(cdev, struct an30259a_led, cdev);
|
|
|
|
mutex_lock(&led->chip->mutex);
|
|
num = led->num;
|
|
|
|
/* slope time can only be a multiple of 500ms. */
|
|
if (off % AN30259A_SLOPE_RESOLUTION || on % AN30259A_SLOPE_RESOLUTION) {
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
/* up to a maximum of 7500ms. */
|
|
if (off > AN30259A_BLINK_MAX_TIME || on > AN30259A_BLINK_MAX_TIME) {
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
/* if no blink specified, default to 1 Hz. */
|
|
if (!off && !on) {
|
|
*delay_off = off = 500;
|
|
*delay_on = on = 500;
|
|
}
|
|
|
|
/* convert into values the HW will understand. */
|
|
off /= AN30259A_SLOPE_RESOLUTION;
|
|
on /= AN30259A_SLOPE_RESOLUTION;
|
|
|
|
/* duty min should be zero (=off), delay should be zero. */
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT2(num),
|
|
AN30259A_LED_DELAY(0) | AN30259A_LED_DUTYMIN(0));
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* reset detention time (no "breathing" effect). */
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT3(num),
|
|
AN30259A_LED_DT1(0) | AN30259A_LED_DT2(0));
|
|
if (ret)
|
|
goto error;
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT4(num),
|
|
AN30259A_LED_DT3(0) | AN30259A_LED_DT4(0));
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* slope time controls on/off cycle length. */
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_SLOPE(num),
|
|
AN30259A_LED_SLOPETIME1(off) |
|
|
AN30259A_LED_SLOPETIME2(on));
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* Finally, enable slope mode. */
|
|
ret = regmap_read(led->chip->regmap, AN30259A_REG_LED_ON, &led_on);
|
|
if (ret)
|
|
goto error;
|
|
|
|
led_on |= AN30259A_LED_SLOPE(num) | AN30259A_LED_EN(led->num);
|
|
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_LED_ON, led_on);
|
|
|
|
if (!ret)
|
|
led->sloping = true;
|
|
error:
|
|
mutex_unlock(&led->chip->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int an30259a_dt_init(struct i2c_client *client,
|
|
struct an30259a *chip)
|
|
{
|
|
struct device_node *np = client->dev.of_node, *child;
|
|
int count, ret;
|
|
int i = 0;
|
|
const char *str;
|
|
struct an30259a_led *led;
|
|
|
|
count = of_get_child_count(np);
|
|
if (!count || count > AN30259A_MAX_LEDS)
|
|
return -EINVAL;
|
|
|
|
for_each_available_child_of_node(np, child) {
|
|
u32 source;
|
|
|
|
ret = of_property_read_u32(child, "reg", &source);
|
|
if (ret != 0 || !source || source > AN30259A_MAX_LEDS) {
|
|
dev_err(&client->dev, "Couldn't read LED address: %d\n",
|
|
ret);
|
|
count--;
|
|
continue;
|
|
}
|
|
|
|
led = &chip->leds[i];
|
|
|
|
led->num = source;
|
|
led->chip = chip;
|
|
led->fwnode = of_fwnode_handle(child);
|
|
|
|
if (!of_property_read_string(child, "default-state", &str)) {
|
|
if (!strcmp(str, "on"))
|
|
led->default_state = STATE_ON;
|
|
else if (!strcmp(str, "keep"))
|
|
led->default_state = STATE_KEEP;
|
|
else
|
|
led->default_state = STATE_OFF;
|
|
}
|
|
|
|
of_property_read_string(child, "linux,default-trigger",
|
|
&led->cdev.default_trigger);
|
|
|
|
i++;
|
|
}
|
|
|
|
if (!count)
|
|
return -EINVAL;
|
|
|
|
chip->num_leds = i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct regmap_config an30259a_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = AN30259A_REG_MAX,
|
|
};
|
|
|
|
static void an30259a_init_default_state(struct an30259a_led *led)
|
|
{
|
|
struct an30259a *chip = led->chip;
|
|
int led_on, err;
|
|
|
|
switch (led->default_state) {
|
|
case STATE_ON:
|
|
led->cdev.brightness = LED_FULL;
|
|
break;
|
|
case STATE_KEEP:
|
|
err = regmap_read(chip->regmap, AN30259A_REG_LED_ON, &led_on);
|
|
if (err)
|
|
break;
|
|
|
|
if (!(led_on & AN30259A_LED_EN(led->num))) {
|
|
led->cdev.brightness = LED_OFF;
|
|
break;
|
|
}
|
|
regmap_read(chip->regmap, AN30259A_REG_LEDCC(led->num),
|
|
&led->cdev.brightness);
|
|
break;
|
|
default:
|
|
led->cdev.brightness = LED_OFF;
|
|
}
|
|
|
|
an30259a_brightness_set(&led->cdev, led->cdev.brightness);
|
|
}
|
|
|
|
static int an30259a_probe(struct i2c_client *client)
|
|
{
|
|
struct an30259a *chip;
|
|
int i, err;
|
|
|
|
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
err = an30259a_dt_init(client, chip);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
mutex_init(&chip->mutex);
|
|
chip->client = client;
|
|
i2c_set_clientdata(client, chip);
|
|
|
|
chip->regmap = devm_regmap_init_i2c(client, &an30259a_regmap_config);
|
|
|
|
for (i = 0; i < chip->num_leds; i++) {
|
|
struct led_init_data init_data = {};
|
|
|
|
an30259a_init_default_state(&chip->leds[i]);
|
|
chip->leds[i].cdev.brightness_set_blocking =
|
|
an30259a_brightness_set;
|
|
chip->leds[i].cdev.blink_set = an30259a_blink_set;
|
|
|
|
init_data.fwnode = chip->leds[i].fwnode;
|
|
init_data.devicename = AN30259A_NAME;
|
|
init_data.default_label = ":";
|
|
|
|
err = devm_led_classdev_register_ext(&client->dev,
|
|
&chip->leds[i].cdev,
|
|
&init_data);
|
|
if (err < 0)
|
|
goto exit;
|
|
}
|
|
return 0;
|
|
|
|
exit:
|
|
mutex_destroy(&chip->mutex);
|
|
return err;
|
|
}
|
|
|
|
static int an30259a_remove(struct i2c_client *client)
|
|
{
|
|
struct an30259a *chip = i2c_get_clientdata(client);
|
|
|
|
mutex_destroy(&chip->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id an30259a_match_table[] = {
|
|
{ .compatible = "panasonic,an30259a", },
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, an30259a_match_table);
|
|
|
|
static const struct i2c_device_id an30259a_id[] = {
|
|
{ "an30259a", 0 },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, an30259a_id);
|
|
|
|
static struct i2c_driver an30259a_driver = {
|
|
.driver = {
|
|
.name = "leds-an30259a",
|
|
.of_match_table = of_match_ptr(an30259a_match_table),
|
|
},
|
|
.probe_new = an30259a_probe,
|
|
.remove = an30259a_remove,
|
|
.id_table = an30259a_id,
|
|
};
|
|
|
|
module_i2c_driver(an30259a_driver);
|
|
|
|
MODULE_AUTHOR("Simon Shields <simon@lineageos.org>");
|
|
MODULE_DESCRIPTION("AN30259A LED driver");
|
|
MODULE_LICENSE("GPL v2");
|